scholarly journals VentQsys: Low-cost open IoT system for $$CO_2$$ monitoring in classrooms

2021 ◽  
Author(s):  
Rafael Fayos-Jordan ◽  
Jaume Segura-Garcia ◽  
Antonio Soriano-Asensi ◽  
Santiago Felici-Castell ◽  
Jose M. Felisi ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Relative Humidity ◽  
Low Cost ◽  
Control Ventilation ◽  
Indoor Environments ◽  
Educational Context ◽  
Good Tool ◽  
Open Hardware ◽  
Measuring Devices ◽  
Software Monitoring

AbstractIn educational context, a source of nuisance for students is carbon dioxide ($$CO_2$$ C O 2 ) concentration due to closed rooms and lack of ventilation or circulatory air. Also, in the pandemic context, ventilation in indoor environments has been proven as a good tool to control the COVID-19 infections. In this work, it is presented a low cost IoT-based open-hardware and open-software monitoring system to control ventilation, by measuring carbon dioxide ($$CO_2$$ C O 2 ), temperature and relative humidity. This system provides also support for automatic updating, auto-self calibration and adds some Cloud and Edge offloading of computational features for mapping functionalities. From the tests carried out, it is observed a good performance in terms of functionality, battery durability, compared to other measuring devices, more expensive than our proposal.

Application of Disk Aerators to Recarbonation of Alkaline Wastewater from Wet Gasification of Carbide

1991 ◽  
Vol 24 (7) ◽  
pp. 277-284 ◽  
Author(s):  
E. Gomólka ◽  
B. Gomólka
Keyword(s):  
Carbon Dioxide ◽  
Liquid Phase ◽  
Gas Phase ◽  
Flue Gas ◽  
Carbonic Acid ◽  
Low Cost ◽  
Flue Gases ◽  
Carbon Dioxide Content ◽  
Patent Claim ◽  
Phase Dispersion

Whenever possible, neutralization of alkaline wastewater should involve low-cost acid. It is conventional to make use of carbonic acid produced via the reaction of carbon dioxide (contained in flue gases) with water according to the following equation: Carbon dioxide content in the flue gas stream varies from 10% to 15%. The flue gas stream may either be passed to the wastewater contained in the recarbonizers, or. enter the scrubbers (which are continually sprayed with wastewater) from the bottom in oountercurrent. The reactors, in which recarbonation occurs, have the ability to expand the contact surface between gaseous and liquid phase. This can be achieved by gas phase dispersion in the liquid phase (bubbling), by liquid phase dispersion in the gas phase (spraying), or by bubbling and spraying, and mixing. These concurrent operations are carried out during motion of the disk aerator (which is a patent claim). The authors describe the functioning of the disk aerator, the composition of the wastewater produced during wet gasification of carbide, the chemistry of recarbonation and decarbonation, and the concept of applying the disk aerator so as to make the wastewater fit for reuse (after suitable neutralization) as feeding water in acetylene generators.

Characterization of a Polymeric Membrane for the Separation of Hydrogen in a Mixture with CO2

2016 ◽  
Vol 9 (1) ◽  
pp. 126-136 ◽  
Author(s):  
Dionisio H. Malagón-Romero ◽  
Alexander Ladino ◽  
Nataly Ortiz ◽  
Liliana P. Green
Keyword(s):  
Carbon Dioxide ◽  
Hydrogen Production ◽  
Test Performance ◽  
Low Cost ◽  
Time Lag ◽  
Polymeric Membrane ◽  
Biological Processes ◽  
Scanning Calorimetry ◽  
Environmentally Sustainable ◽  
Production Of Hydrogen

Hydrogen is expected to play an important role as a clean, reliable and renewable energy source. A key challenge is the production of hydrogen in an economically and environmentally sustainable way on an industrial scale. One promising method of hydrogen production is via biological processes using agricultural resources, where the hydrogen is found to be mixed with other gases, such as carbon dioxide. Thus, to separate hydrogen from the mixture, it is challenging to implement and evaluate a simple, low cost, reliable and efficient separation process. So, the aim of this work was to develop a polymeric membrane for hydrogen separation. The developed membranes were made of polysulfone via phase inversion by a controlled evaporation method with 5 wt % and 10 wt % of polysulfone resulting in thicknesses of 132 and 239 micrometers, respectively. Membrane characterization was performed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and ASTM D882 tensile test. Performance was characterized using a 23 factorial experiment using the time lag method, comparing the results with those from gas chromatography (GC). As a result, developed membranes exhibited dense microstructures, low values of RMS roughness, and glass transition temperatures of approximately 191.75 °C and 190.43 °C for the 5 wt % and 10 wt % membranes, respectively. Performance results for the given membranes showed a hydrogen selectivity of 8.20 for an evaluated gas mixture 54% hydrogen and 46% carbon dioxide. According to selectivity achieved, H2 separation from carbon dioxide is feasible with possibilities of scalability. These results are important for consolidating hydrogen production from biological processes.

scholarly journals Developing Relative Humidity and Temperature Corrections for Low-Cost Sensors Using Machine Learning

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3338
Author(s):  
Ivan Vajs ◽  
Dejan Drajic ◽  
Nenad Gligoric ◽  
Ilija Radovanovic ◽  
Ivan Popovic
Keyword(s):  
Machine Learning ◽  
Air Quality ◽  
Relative Humidity ◽  
Low Cost ◽  
Quality Monitoring ◽  
Air Quality Monitoring ◽  
Lower Accuracy ◽  
Wide Range ◽  
The Impact ◽  
Monitoring Stations

Existing government air quality monitoring networks consist of static measurement stations, which are highly reliable and accurately measure a wide range of air pollutants, but they are very large, expensive and require significant amounts of maintenance. As a promising solution, low-cost sensors are being introduced as complementary, air quality monitoring stations. These sensors are, however, not reliable due to the lower accuracy, short life cycle and corresponding calibration issues. Recent studies have shown that low-cost sensors are affected by relative humidity and temperature. In this paper, we explore methods to additionally improve the calibration algorithms with the aim to increase the measurement accuracy considering the impact of temperature and humidity on the readings, by using machine learning. A detailed comparative analysis of linear regression, artificial neural network and random forest algorithms are presented, analyzing their performance on the measurements of CO, NO2 and PM10 particles, with promising results and an achieved R2 of 0.93–0.97, 0.82–0.94 and 0.73–0.89 dependent on the observed period of the year, respectively, for each pollutant. A comprehensive analysis and recommendations on how low-cost sensors could be used as complementary monitoring stations to the reference ones, to increase spatial and temporal measurement resolution, is provided.

Turbulent plumes of heat, moist heat, and carbon dioxide elicit upwind anemotaxis in tsetse flies Glossina morsitans morsitans Westwood (Diptera: Glossinidae)

2002 ◽  
Vol 80 (7) ◽  
pp. 1149-1155 ◽  
Author(s):  
W G Evans ◽  
R H Gooding
Keyword(s):  
Carbon Dioxide ◽  
Wind Tunnel ◽  
Relative Humidity ◽  
Glossina Morsitans Morsitans ◽  
Tsetse Flies ◽  
Glossina Morsitans ◽  
Low Velocity ◽  
Upwind Flight ◽  
Moist Heat ◽  
Heated Air

The roles and interactions of turbulent plumes of heat, moist heat, and carbon dioxide in mediating upwind flight of adult tsetse flies (Glossina morsitans morsitans Westwood) were investigated using a wind tunnel in a constant-environment chamber. Heat fluctuations in the plume that were detected by a thermocouple and displayed as oscilloscope traces allowed direct visualization of the structures of the plumes. Significantly more flies flew upwind when exposed to plumes of (i) carbon dioxide (0.0051% above background) and air (58% relative humidity) compared with air alone; (ii) carbon dioxide and heated air (35% relative humidity and temperature fluctuating up to 0.09°C above background) compared with carbon dioxide and air; and (iii) carbon dioxide and moist (82% relative humidity) heated air (temperature fluctuating up to 0.05°C above background) compared with carbon dioxide and heated air. However, there were no significant differences in upwind flight of flies exposed to plumes of (i) air compared with humidified air (65% relative humidity); (ii) carbon dioxide and heated air compared with heated air alone; and (iii) carbon dioxide and moist heated air compared with moist heated air alone. Recorded temperature fluctuations in heat plumes transported downwind from a tethered steer in a pasture showed patterns similar to those produced in the wind-tunnel plumes. These results suggest that host emissions of carbon dioxide alone and combined heat and moisture carried downwind by low-velocity winds elicit upwind anemotaxis in tsetse flies, which distinguish these emissions from a background of lower atmospheric levels.

Carbon Dioxide as a Carbon Resource – Recent Trends and Perspectives

2012 ◽  
Vol 67 (10) ◽  
pp. 961-975 ◽  
Author(s):  
Markus Hölscher ◽  
Christoph Gürtler ◽  
Wilhelm Keim ◽  
Thomas E. Müller ◽  
Martina Peters ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Raw Materials ◽  
Low Cost ◽  
Polymeric Materials ◽  
Short Review ◽  
Chemical Research ◽  
Bond Forming ◽  
Bulk Chemicals ◽  
High Thermodynamic Stability ◽  
Recent Trends

With the growing perception of industrialized societies that fossil raw materials are limited resources, academic chemical research and chemical industry have started to introduce novel catalytic technologies which aim at the development of economically competitive processes relying much more strongly on the use of alternative carbon feedstocks. Great interest is given world-wide to carbon dioxide (CO2) as it is part of the global carbon cycle, nontoxic, easily available in sufficient quantities anywhere in the industrialized world, and can be managed technically with ease, and at low cost. In principle carbon dioxide can be used to generate a large variety of synthetic products ranging from bulk chemicals like methanol and formic acid, through polymeric materials, to fine chemicals like aromatic acids useful in the pharmaceutical industry. Owing to the high thermodynamic stability of CO2, the energy constraints of chemical reactions have to be carefully analyzed to select promising processes. Furthermore, the high kinetic barriers for incorporation of CO2 into C-H or C-C bond forming reactions require that any novel transformation of CO2 must inevitably be associated with a novel catalytic technology. This short review comprises a selection of the most recent academic and industrial research developments mainly with regard to innovations in CO2 chemistry in the field of homogeneous catalysis and processes.

scholarly journals Induced Magnetic Field-Based Indoor Positioning System for Underwater Environments

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2218
Author(s):  
Sizhen Bian ◽  
Peter Hevesi ◽  
Leif Christensen ◽  
Paul Lukowicz
Keyword(s):  
Magnetic Field ◽  
Low Cost ◽  
Autonomous Underwater Vehicles ◽  
Wide Band ◽  
Propagation Delay ◽  
Positioning System ◽  
Indoor Environments ◽  
Coverage Area ◽  
Underwater Positioning ◽  
Similar Accuracy

Autonomous underwater vehicles (AUV) are seen as an emerging technology for maritime exploration but are still restricted by the availability of short range, accurate positioning methods necessary, e.g., when docking remote assets. Typical techniques used for high-accuracy positioning in indoor use case scenarios, such as systems using ultra-wide band radio signals (UWB), cannot be applied for underwater positioning because of the quick absorption of the positioning medium caused by the water. Acoustic and optic solutions for underwater positioning also face known problems, such as the multi-path effects, high propagation delay (acoustics), and environmental dependency. This paper presents an oscillating magnetic field-based indoor and underwater positioning system. Unlike those radio wave-based positioning modalities, the magnetic approach generates a bubble-formed magnetic field that will not be deformed by the environmental variation because of the very similar permeability of water and air. The proposed system achieves an underwater positioning mean accuracy of 13.3 cm in 2D and 19.0 cm in 3D with the multi-lateration positioning method and concludes the potential of the magnetic field-based positioning technique for underwater applications. A similar accuracy was also achieved for various indoor environments that were used to test the influence of cluttered environment and of cross environment. The low cost and power consumption system is scalable for extensive coverage area and could plug-and-play without pre-calibration.

EFFECTS OF ENVIRONMENT ON GROWING HYDROPONICS MAIZE FODDER USING LOW-COST GREENHOUSE CULTIVATING UNIT FOR LIVESTOCK PRODUCTION.

2021 ◽  
pp. 71-72
Author(s):  
Adamu, B. ◽  
Abdullahi, S. ◽  
Saidu, S. G ◽  
Yustus Sunday Francis
Keyword(s):  
Relative Humidity ◽  
Environmental Factors ◽  
Production System ◽  
Low Cost ◽  
Factors Affecting ◽  
Production Water ◽  
Fodder Production ◽  
Food Requirement ◽  
Greenhouse Cultivation ◽  
Near Future

The term 'Hydroponics' was derived from Greek words 'hydro' means water and 'ponics' means labor. Hydroponic is a modern agricultural technique that uses nutrient solution rather than soil solution for fodder production. As population increases the food demand also increased, the existing system of agriculture will not be able to meet the food requirement in the near future due to environmental challenges in the industry. The major environmental factors affecting the hydroponics production system are; Temperature, relative humidity, and light. The objectives of this studies are to examine the hydroponics greenhouse technologies, impact of environmental factors on hydroponics greenhouse cultivation and challenges of growing on hydroponics greenhouse system. This study revealed that hydroponics greenhouse cultivation is a better option for improved fodder production, water utilization, palatability and digestibility.

Sign in / Sign up

Export Citation Format

Share Document