Carbon Dioxide as a Carbon Resource – Recent Trends and Perspectives

2012 ◽  
Vol 67 (10) ◽  
pp. 961-975 ◽  
Author(s):  
Markus Hölscher ◽  
Christoph Gürtler ◽  
Wilhelm Keim ◽  
Thomas E. Müller ◽  
Martina Peters ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Raw Materials ◽  
Low Cost ◽  
Polymeric Materials ◽  
Short Review ◽  
Chemical Research ◽  
Bond Forming ◽  
Bulk Chemicals ◽  
High Thermodynamic Stability ◽  
Recent Trends

With the growing perception of industrialized societies that fossil raw materials are limited resources, academic chemical research and chemical industry have started to introduce novel catalytic technologies which aim at the development of economically competitive processes relying much more strongly on the use of alternative carbon feedstocks. Great interest is given world-wide to carbon dioxide (CO2) as it is part of the global carbon cycle, nontoxic, easily available in sufficient quantities anywhere in the industrialized world, and can be managed technically with ease, and at low cost. In principle carbon dioxide can be used to generate a large variety of synthetic products ranging from bulk chemicals like methanol and formic acid, through polymeric materials, to fine chemicals like aromatic acids useful in the pharmaceutical industry. Owing to the high thermodynamic stability of CO2, the energy constraints of chemical reactions have to be carefully analyzed to select promising processes. Furthermore, the high kinetic barriers for incorporation of CO2 into C-H or C-C bond forming reactions require that any novel transformation of CO2 must inevitably be associated with a novel catalytic technology. This short review comprises a selection of the most recent academic and industrial research developments mainly with regard to innovations in CO2 chemistry in the field of homogeneous catalysis and processes.

scholarly journals Recent Progress in Green Cement Technology Utilizing Low-Carbon Emission Fuels and Raw Materials: A Review

2019 ◽  
Vol 11 (2) ◽  
pp. 537 ◽  
Author(s):  
Ali Naqi ◽  
Jeong Jang
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Alternative Fuels ◽  
Raw Materials ◽  
Low Cost ◽  
Cement Industry ◽  
Industrial Wastes ◽  
Low Carbon ◽  
Cement Production ◽  
Cement Manufacturing

The cement industry is facing numerous challenges in the 21st century due to depleting natural fuel resources, shortage of raw materials, exponentially increasing cement demand and climate linked environmental concerns. Every tonne of ordinary Portland cement (OPC) produced releases an equivalent amount of carbon dioxide to the atmosphere. In this regard, cement manufactured from locally available minerals and industrial wastes that can be blended with OPC as substitute, or full replacement with novel clinkers to reduce the energy requirements is strongly desirable. Reduction in energy consumption and carbon emissions during cement manufacturing can be achieved by introducing alternative cements. The potential of alternative cements as a replacement of conventional OPC can only be fully realized through detailed investigation of binder properties with modern technologies. Seven prominent alternative cement types are considered in this study and their current position compared to OPC has been discussed. The study provides a comprehensive analysis of options for future cements, and an up-to-date summary of the different alternative fuels and binders that can be used in cement production to mitigate carbon dioxide emissions. In addition, the practicalities and benefits of producing the low-cost materials to meet the increasing cement demand are discussed.

scholarly journals Use of plants to clean polluted air: A potentially effective and low-cost phytoremediation technology

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 4650-4654
Author(s):  
Bojin Zhang ◽  
Dian Cao ◽  
Shengdong Zhu
Keyword(s):  
Carbon Dioxide ◽  
Air Pollution ◽  
Air Quality ◽  
Greenhouse Gases ◽  
Raw Materials ◽  
Low Cost ◽  
Basic Research ◽  
Research Area ◽  
Special Equipment ◽  
Pollution Treatment

Air pollution poses a great threat to human health, and it has become a worldwide problem that needs to be urgently dealt with. Many measures have been taken to reduce air pollution and improve air quality. These methods are generally costly and require special equipment. Some plants have the ability to assimilate, degrade, or modify toxic pollutants in air into less toxic ones. It is proposed here to develop plant-based technology to clean polluted air at low cost. This air phytoremediation technology has many potential advantages in contrast with traditional air pollution treatment methods. It is simple, potentially cheap, and easily implemented. Plants to be used for air phytoremediation have the potential to reduce pollutants in air and improve air quality; they also fix carbon dioxide through photosynthesis and help to decrease greenhouse gases in the atmosphere. The selected plants can also be used as raw materials for production of energy and bio-based chemicals. However, little research has been carried out on air phytoremediation technology, especially in the basic research area. This editorial gives a brief discussion about air phytoremediation to stimulate more research on this technology and further improve its effectiveness in practical use.

scholarly journals Two Step and Direct Fermentation in the Production of Ethanol from Starch: A Short Review

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Endah Retno Dyartanti ◽  
Margono Margono ◽  
Anisa Raditya Nurohmah ◽  
Shofirul Sholikhatun Nisa ◽  
Novan Riantosa
Keyword(s):  
Ethanol Production ◽  
Raw Materials ◽  
Low Cost ◽  
Short Review ◽  
Raw Material ◽  
High Yield ◽  
Direct Production ◽  
Pre Treatment ◽  
Ph Range ◽  
Direct Fermentation

Ethanol as a renewable fuel has been widely produced in various countries. One source of raw material for producing ethanol is starch. The process of producing ethanol from starch needs to be pretreated so that starch molecules can split into smaller ones. However, this process requires pre-treatment which will expensive more than ethanol from sugar. There are two types of pretreatment i.e. two-step ethanol production and direct fermentation. There is two kind of hydrolysis, acid hydrolysis, and enzymatic hydrolysis. Two-step ethanol production is a conventional method that separates pretreatment and fermentation process, while direct fermentation is the direct production of starch into ethanol using recombinant yeast that co-produces enzymes such as amylose and glucoamylase. Two-step ethanol production has the advantage of high yield but needs high cost whereas, direct fermentation has the advantage of low-cost production but needs longer time. Common starch to ethanol production consists of two stages, namely hydrolysis of raw materials into glucose and fermentation into ethanol. Both of these processes can be run on average at temperatures of 30-80<sup>o</sup>C with a pH range of 4-6 and varying time intervals. The enzyme used depends on the source of the starch, but the most commonly used is <em>Saccharomyces cerevisiae</em>.

Recent advances in light-driven carbon–carbon bond formation via carbon dioxide activation

Synthesis ◽  
2021 ◽  
Author(s):  
Jieun Jung ◽  
Susumu SAITO
Keyword(s):  
Carbon Dioxide ◽  
Organic Molecules ◽  
Low Cost ◽  
Value Added ◽  
Short Review ◽  
Metal Catalyst ◽  
Feed Stock ◽  
Carbon Carbon Bond ◽  
Carbon Dioxide Co2 ◽  
Made In

Carbon dioxide (CO2) is an attractive renewable one-carbon (C1) feed-stock in terms of its earth abundance, low cost, and non-toxicity. Developing new catalytic protocols for the efficient insertion of CO2 into organic molecules has been of great importance for ecological economics. In recent years, remarkable achievements have been made in the field of light-driven catalytic carboxylation via the activa-tion of CO2 as the key reagent. In this short review, we focus on the recent development of light-promoted carboxylation utilizing CO2 to synthesize value-added chemicals in the presence of a dual visible-light photoredox/transition metal catalyst or a photoredox catalyst.

Bamboo Waste-based Bio-composite Substance: An application for Low-cost Construction Materials

2020 ◽  
Vol 4 (1) ◽  
pp. 41-48
Author(s):  
Teodoro Astorga Amatosa ◽  
Michael E. Loretero
Keyword(s):  
Composite Materials ◽  
Sea Water ◽  
Raw Materials ◽  
Low Cost ◽  
Construction Materials ◽  
Single Layer ◽  
High Strength ◽  
Green Technology ◽  
Experimental Medium ◽  
Natural Treatment

Bamboo is a lightweight and high-strength raw materials that encouraged researchers to investigate and explore, especially in the field of biocomposite and declared as one of the green-technology on the environment as fully accountable as eco-products. This research was to assess the technical feasibility of making single-layer experimental Medium-Density Particleboard panels from the bamboo waste of a three-year-old (Dendrocalamus asper). Waste materials were performed to produce composite materials using epoxy resin (C21H25C105) from a natural treatment by soaking with an average of pH 7.6 level of sea-water. Three different types of MDP produced, i.e., bamboo waste strip MDP (SMDP), bamboo waste chips MDP (CMDP) and bamboo waste mixed strip-chips MDP (MMDP) by following the same process. The experimental panels tested for their physical-mechanical properties according to the procedures defined by ASTM D1037-12. Conclusively, even the present study shows properties of MDP with higher and comparable to other composite materials; further research must be given better attention as potential substitute to be used as hardwood materials, especially in the production, design, and construction usage.

Low-Cost Raw Materials Synthesized Na 2.9375PS 3.9375Cl 0.0625 Solid Electrolyte

2019 ◽  
Author(s):  
Yu Wang ◽  
Nachuan Yang ◽  
Yi Shuai ◽  
Yunpeng Zhang ◽  
Kanghua Chen
Keyword(s):  
Solid Electrolyte ◽  
Raw Materials ◽  
Low Cost

Application of Disk Aerators to Recarbonation of Alkaline Wastewater from Wet Gasification of Carbide

1991 ◽  
Vol 24 (7) ◽  
pp. 277-284 ◽  
Author(s):  
E. Gomólka ◽  
B. Gomólka
Keyword(s):  
Carbon Dioxide ◽  
Liquid Phase ◽  
Gas Phase ◽  
Flue Gas ◽  
Carbonic Acid ◽  
Low Cost ◽  
Flue Gases ◽  
Carbon Dioxide Content ◽  
Patent Claim ◽  
Phase Dispersion

Whenever possible, neutralization of alkaline wastewater should involve low-cost acid. It is conventional to make use of carbonic acid produced via the reaction of carbon dioxide (contained in flue gases) with water according to the following equation: Carbon dioxide content in the flue gas stream varies from 10% to 15%. The flue gas stream may either be passed to the wastewater contained in the recarbonizers, or. enter the scrubbers (which are continually sprayed with wastewater) from the bottom in oountercurrent. The reactors, in which recarbonation occurs, have the ability to expand the contact surface between gaseous and liquid phase. This can be achieved by gas phase dispersion in the liquid phase (bubbling), by liquid phase dispersion in the gas phase (spraying), or by bubbling and spraying, and mixing. These concurrent operations are carried out during motion of the disk aerator (which is a patent claim). The authors describe the functioning of the disk aerator, the composition of the wastewater produced during wet gasification of carbide, the chemistry of recarbonation and decarbonation, and the concept of applying the disk aerator so as to make the wastewater fit for reuse (after suitable neutralization) as feeding water in acetylene generators.

Surface Modification of Poly(Vinylchloride) for Manufacturing Advanced Catheters

2020 ◽  
Vol 27 (10) ◽  
pp. 1616-1633 ◽  
Author(s):  
Oana Cristina Duta ◽  
Aurel Mihail Ţîţu ◽  
Alexandru Marin ◽  
Anton Ficai ◽  
Denisa Ficai ◽  
...  
Keyword(s):  
Surface Modification ◽  
Chemical Modification ◽  
Medical Devices ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Modern Medicine ◽  
Structural Failure ◽  
Chemical Grafting ◽  
One Step

Polymeric materials, due to their excellent physicochemical properties and versatility found applicability in multiples areas, including biomaterials used in tissue regeneration, prosthetics (hip, artificial valves), medical devices, controlled drug delivery systems, etc. Medical devices and their applications are very important in modern medicine and the need to develop new materials with improved properties or to improve the existent materials is increasing every day. Numerous reasearches are activated in this domain in order to obtain materials/surfaces that does not have drawbacks such as structural failure, calcifications, infections or thrombosis. One of the most used material is poly(vinylchloride) (PVC) due to its unique properties, availability and low cost. The most common method used for obtaining tubular devices that meet the requirements of medical use is the surface modification of polymers without changing their physical and mechanical properties, in bulk. PVC is a hydrophobic polymer and therefore many research studies were conducted in order to increase the hydrophilicity of the surface by chemical modification in order to improve biocompatibility, to enhance wettability, reduce friction or to make lubricious or antimicrobial coatings. Surface modification of PVC can be achieved by several strategies, in only one step or, in some cases, in two or more steps by applying several techniques consecutively to obtain the desired modification / performances. The most common processes used for modifying the surface of PVC devices are: plasma treatment, corona discharge, chemical grafting, electric discharge, vapour deposition of metals, flame treatment, direct chemical modification (oxidation, hydrolysis, etc.) or even some physical modification of the roughness of the surface.

Characterization of a Polymeric Membrane for the Separation of Hydrogen in a Mixture with CO2

2016 ◽  
Vol 9 (1) ◽  
pp. 126-136 ◽  
Author(s):  
Dionisio H. Malagón-Romero ◽  
Alexander Ladino ◽  
Nataly Ortiz ◽  
Liliana P. Green
Keyword(s):  
Carbon Dioxide ◽  
Hydrogen Production ◽  
Test Performance ◽  
Low Cost ◽  
Time Lag ◽  
Polymeric Membrane ◽  
Biological Processes ◽  
Scanning Calorimetry ◽  
Environmentally Sustainable ◽  
Production Of Hydrogen

Hydrogen is expected to play an important role as a clean, reliable and renewable energy source. A key challenge is the production of hydrogen in an economically and environmentally sustainable way on an industrial scale. One promising method of hydrogen production is via biological processes using agricultural resources, where the hydrogen is found to be mixed with other gases, such as carbon dioxide. Thus, to separate hydrogen from the mixture, it is challenging to implement and evaluate a simple, low cost, reliable and efficient separation process. So, the aim of this work was to develop a polymeric membrane for hydrogen separation. The developed membranes were made of polysulfone via phase inversion by a controlled evaporation method with 5 wt % and 10 wt % of polysulfone resulting in thicknesses of 132 and 239 micrometers, respectively. Membrane characterization was performed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and ASTM D882 tensile test. Performance was characterized using a 23 factorial experiment using the time lag method, comparing the results with those from gas chromatography (GC). As a result, developed membranes exhibited dense microstructures, low values of RMS roughness, and glass transition temperatures of approximately 191.75 °C and 190.43 °C for the 5 wt % and 10 wt % membranes, respectively. Performance results for the given membranes showed a hydrogen selectivity of 8.20 for an evaluated gas mixture 54% hydrogen and 46% carbon dioxide. According to selectivity achieved, H2 separation from carbon dioxide is feasible with possibilities of scalability. These results are important for consolidating hydrogen production from biological processes.

Sign in / Sign up

Export Citation Format

Share Document