Commercial bentonite clay as low-cost and recyclable “natural” adsorbent for the Carbendazim removal/recover from water: Overview on the adsorption process and preliminary photodegradation considerations

2020 ◽  
Vol 602 ◽  
pp. 125060
Author(s):  
Vito Rizzi ◽  
Jennifer Gubitosa ◽  
Paola Fini ◽  
Roberto Romita ◽  
Angela Agostiano ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Bentonite Clay ◽  
Natural Adsorbent

Surface interaction of sweet potato peels (Ipomoea batata) with Cd(II) and Pb(II) ions in aqueous medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Aqueous Medium ◽  
Sweet Potato ◽  
Adsorption Process ◽  
Low Cost ◽  
Correlation Coefficients ◽  
Order Kinetic ◽  
Thermodynamic Evaluation ◽  
Dissociative Mechanism ◽  
Pseudo Second Order ◽  
Potato Peels

The removal of Cd(II) and Pb(II) ions from aqueous medium was studied using potato peels biomass. The adsorption process was evaluated using Atomic Absorption Spectrophotometer (AAS). The Vibrational band of the potato peels was studied using Fourier Transform Infrared Spectroscopy (FTIR). The adsorption process was carried out with respect to concentration, time, pH, particle size and the thermodynamic evaluation of the process was carried at temperatures of 30, 40, 50 and 60(0C), respectively. The FTIR studies revealed that the potato peels was composed of –OH, -NH, –C=N, –C=C and –C-O-C functional groups. The optimum removal was obtained at pH 8 and contact time of 20 min. The adsorption process followed Freundlich adsorption and pseudo second-order kinetic models with correlation coefficients (R2) greater than 0.900. The equilibrium adsorption capacity showed that Pb(II) ion was more adsorbed on the surface of the potato peels biomass versus Cd (II) ion (200.91 mg/g > 125.00 mg/g). The thermodynamic studies indicated endothermic, dissociative mechanism and spontaneous adsorption process. This study shows that sweet potato peels is useful as a low-cost adsorbent for the removal of Cd(II) and Pb(II) ions from aqueous medium.

scholarly journals Removal of Cadmium(II) from Water using Modified Citrus limettioides Peels: Thermodynamic and Isotherm Studies

2019 ◽  
Vol 32 (1) ◽  
pp. 73-78
Author(s):  
P. Janaki ◽  
R. Sudha ◽  
T.S. Sribharathi ◽  
P. Anitha ◽  
K. Poornima ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Raw Material ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Method ◽  
Chemically Modified ◽  
Adsorption Performance ◽  
Monolayer Adsorption ◽  
Isotherm Equations

The adsorption performance of sulphuric acid treated low cost adsorbent synthesized by using Citrus limettioides peel as an effective raw material for the removal of cadmium(II) from water. The batch adsorption method was carried out to optimize some parameters like contact time, pH and adsorbent dose. The nonlinear isotherm equations were used to calculate the different isotherm constant of five isotherm models namely Freundlich, Langmuir, Dubinin-Radushkevich, Redlich-Peterson and Sips. The Langmuir monolayer adsorption capacity of chemically modified Citrus limettioides peel was found to be 287.60 mg g-1. The negative values of ΔGº and ΔHº showed that the adsorption process is spontaneous and exothermic.

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

Adsorption of Ni (II) from Aqueous Solution Based on Porous Magnetic/Chitosan Resin

2014 ◽  
Vol 936 ◽  
pp. 829-833
Author(s):  
Hai Song ◽  
Xing Hai Yu ◽  
Xiao Qin Zhang ◽  
Gui Fang Yan ◽  
Yuan Zhi Zhen
Keyword(s):  
Aqueous Solution ◽  
Aqueous Medium ◽  
Thermodynamic Parameters ◽  
Adsorption Process ◽  
Low Cost ◽  
Second Order ◽  
Magnetic Chitosan ◽  
Spontaneous Process ◽  
Chitosan Resin ◽  
Kinetics And Thermodynamic

The purpose of this work is to prepare a low-cost biosorbent,Porous Magnetic/Chitosan Resin(MCR), and determine the ability of this biosorbent to removing Ni (II) ion from aqueous medium. Both kinetics and thermodynamic parameters of the adsorption process were also estimated. The thermodynamic parameters indicated an exothermic spontaneous process and the kinetics followed the second-order adsorption process.

scholarly journals A study of adsorption isotherms for the removal of herbicide Atlantis WG from aqueous solutions by using Bentonite clay

2015 ◽  
Vol 12 (1) ◽  
pp. 148-156
Author(s):  
Baghdad Science Journal
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Process ◽  
Equilibrium Concentration ◽  
Bentonite Clay ◽  
Langmuir Model ◽  
Effect Of Temperature ◽  
Isotherm Models ◽  
Sorption Data ◽  
Freundlich Model ◽  
The Subject

The subject of this research involves studying adsorption to removal herbicide Atlantis WG from aqueous solutions by bentonite clay. The equilibrium concentration have been determined spectra photometry by using UV-Vis spectrophotometer. The experimental equilibrium sorption data were analyzed by two widely, Langmuir and Freundlish isotherm models. The Langmuir model gave a better fit than Freundlich model The adsorption amount of (Atlantis WG) increased when the temperature and pH decreased. The thermodynamic parameters like ?G, ?H, and ?S have been calculated from the effect of temperature on adsorption process, is exothermic. The kinetic of adsorption process was studied depending on Lagergren ,Morris ? Weber and Rauschenberg equations.

scholarly journals Potential of Iron Pillared Clay as Active Nanocatalyst for Rapid Decolorization of Methylene Blue

2019 ◽  
Vol 7 (2) ◽  
pp. 46-53
Author(s):  
Lal hmunsiama ◽  
◽  
Seung-Mok Lee ◽  
Keyword(s):  
Methylene Blue ◽  
Iron Oxide ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Analytical Data ◽  
Bentonite Clay ◽  
Pillared Clay ◽  
Oh Radicals ◽  
Heterogeneous Structure ◽  
Iron Oxide Particles

In this study, the iron-pillared clay nanocatalyst (ICN) was employed as a nanocatalyst for decolorization of methylene blue (MB) in aqueous solutions without hydrogen peroxide. The changes in clay structure after the incorporation of iron-oxide particles was studied with the help of XRD analytical data. The SEM micrographs showed higher heterogeneous structure of ICN compared to pristine clay and the specific surface area of ICN (82.54 m2/g) is considerably higher than the unmodified clay (63.41 m2/g). Further, the EDX analytical data indicate the successful incorporation of iron-oxide into bentonite clay. Batch experiments showed that ICN could degrade MB within pH 3.0 to 11.0 and it is efficient even at higher concentrations. The degradation is very fast and more than 90% is removed within 30 mins. A small amount of ICN is effective for degradation of MB and the reusability test showed that ICN can be reuse for several times for the degradation of MB in aqueous solutions. The effect of scavengers studies indicate that the ·OH radicals generated from the ICN are responsible in the degradation of MB. This study indicates that ICN must be low cost and environmentally friendly active nanocatalyst for degradation of MB present in aquatic environment.

scholarly journals Adsorption Study for Chromium (VI) on Iraqi Bentonite

2010 ◽  
Vol 7 (1) ◽  
pp. 745-756
Author(s):  
Baghdad Science Journal
Keyword(s):  
Adsorption Isotherm ◽  
Adsorption Process ◽  
Kinetic Equations ◽  
Bentonite Clay ◽  
Sorption Process ◽  
Adsorption Study ◽  
Chromium Vi ◽  
Freundlich Adsorption Isotherm ◽  
Different Temperatures ◽  
The Subject

The subject of this research involves studying adsorption to remove hexavalent chromium Cr(VI) from aqueous solutions. Adsorption process on bentonite clay as adsorbent was used in the Cr(VI) concentration range (10-100) ppm at different temperatures (298, 303, 308 and 313)K, for different periods of time. The adsorption isotherms were obtained by obeying Langmuir and Freundlich adsorption isotherm with R2 (0.9921-0.9060) and (0.994-0.9998), respectively. The thermodynamic parameters were calculated by using the adsorption process at four different temperatures the values of ?H, ?G and ?S was [(+6.582 ? +6.547) kJ.mol-1, (-284.560 ? -343.070) kJ.mol-1 and (+0.977 ? +1.117) kJ.K-1.mol-1] respectively. This data indicates the spontaneous sorption process. The kinetic study of adsorption process was studied depending on three kinetic equations: 1- Lagergren equation 2- Morris-Weber equation 3- Reichenberg equation

scholarly journals Adsorption capability of brewed tea waste in waters containing toxic lead(II), cadmium (II), nickel (II), and zinc(II) heavy metal ions

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Hakan Çelebi ◽  
Gülden Gök ◽  
Oğuzhan Gök
Keyword(s):  
Heavy Metals ◽  
Adsorption Process ◽  
Low Cost ◽  
Adsorption Capacities ◽  
Tea Waste ◽  
Optimum Ph ◽  
Effects Of Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Capability

Abstract Recently, the search for low-cost eco-friendly adsorbents has become one of the main objectives of researchers. The aim of this study was to test the removal of four heavy metals, namely lead (Pb), zinc (Zn), nickel (Ni) and cadmium (Cd), from a simulated watery solution using brewed tea waste as a potentially suitable adsorbent. The effects of pH levels (2.0–6.0), adsorbent amount (0.1–5.0 g), contact times (1–150 min.) were examined throughout the adsorption process. The results of the experiments showed that the heavy metals elimination yields had an inverse relationship with pH and a linear relationship between the other parameters. The optimum pH for the removal of the heavy metals was between 4.0 and 5.0 in the case of the brewed tea waste. Equilibrium times of 2, 10, 30 and 5 min were required for the adsorption of Pb, Zn, Ni, Cd onto Camellia sinensis, respectively. Based on the results of this study it can be said that brewed tea waste has a high potential to remove heavy metals from aqueous solutions. The maximum adsorption capacities were calculated as 1.197, 1.457, 1.163 and 2.468 mg/g, for Pb, Zn, Ni and Cd, respectively, by fitting the equilibrium data to the Langmuir isotherm model.

scholarly journals Synthesis Fe3O4/Talc nanocomposite by coprecipition-ultrasonication method and advances in hexavalent chromium removal from aqueous solution

2020 ◽  
Vol 38 (9-10) ◽  
pp. 483-501
Author(s):  
Nguyen Thi Huong ◽  
Nguyen Ngoc Son ◽  
Vo Hoang Phuong ◽  
Cong Tien Dung ◽  
Pham Thi Mai Huong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Batch Experiments ◽  
X Ray Diffraction ◽  
Order Model ◽  
X Ray ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Langmuir And Freundlich Equations

The Fe3O4/Talc nanocomposite was synthesized by the coprecipitation-ultrasonication method. The reaction was carried out under a inert gas environment. The nanoparticles were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry techniques (VSM), the surface area of the nanoparticles was determined to be 77.92 m2/g by Brunauer-Emmett-Teller method (BET). The kinetic data showed that the adsorption process fitted with the pseudo-second order model. Batch experiments were carried out to determine the adsorption kinetics and mechanisms of Cr(VI) by Fe3O4/Talc nanocomposite. The adsorption process was found to be highly pH-dependent, which made the material selectively adsorb these metals from aqueous solution. The isotherms of adsorption were also studied using Langmuir and Freundlich equations in linear forms. It is found that the Langmuir equation showed better linear correlation with the experimental data than the Freundlich. The thermodynamics of Cr(VI) adsorption onto the Fe3O4/Talc nanocomposite indicated that the adsorption was exothermic. The reusability study has proven that Fe3O4/Talc nanocomposite can be employed as a low-cost and easy to separate.

Preparation of low-cost sludge-based mesoporous carbon and its adsorption of tetracycline antibiotics

2019 ◽  
Vol 79 (4) ◽  
pp. 676-687 ◽  
Author(s):  
Zou Junyu ◽  
Song Zefeng ◽  
Yang Yuesuo
Keyword(s):  
Photoelectron Spectroscopy ◽  
Mesoporous Carbon ◽  
Adsorption Process ◽  
Low Cost ◽  
Effective Means ◽  
Municipal Sewage ◽  
Isothermal Adsorption ◽  
Pseudo Second Order ◽  
Acidic Conditions ◽  
Physical And Chemical

Abstract Preparation of sludge-derived mesoporous carbon materials (SMCs) through pyrolysis of excess activated sludge from urban municipal sewage plants is an effective means of reducing pollution and utilizing a waste resource. This paper presented a method of SMC preparation in which calcium oxide (CaO), polyacrylamide (PAM), and chitosan (CAS) flocculating agents were used as pore-forming additives. Physical and chemical characterizations of the prepared SMCs were conducted by scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The prepared SMCs were used to adsorb a tetracycline (TC) antibiotic pollutant. The influences of pH, adsorption time, temperature, and pollutant concentration on TC adsorption capacity were determined. The experiments demonstrated that weakly acidic conditions were conducive to TC adsorption, which mainly occurs via electrostatic and π-π interactions. The TC adsorption process by SMCs conformed better to the pseudo-second-order models, indicating that chemical adsorption was the dominant adsorption process. The isothermal adsorption of TC by the SMCs conformed to the Freundlich model. This implied that TC easily adhered onto the SMC surfaces via multilayer homogeneous adsorption. Thermodynamic studies revealed that the adsorption of TC onto SMCs was spontaneous and endothermic.

Sign in / Sign up

Export Citation Format

Share Document