scholarly journals The effect of adhesive type and ply number on the compressive strength retention of CLT at elevated temperatures

2021 ◽  
Vol 266 ◽  
pp. 121156
Author(s):  
Felix Wiesner ◽  
Daniel Thomson ◽  
Luke Bisby
Keyword(s):  
Compressive Strength ◽  
Elevated Temperatures ◽  
Strength Retention ◽  
Adhesive Type

FEDERAL BRONZE 822

Alloy Digest ◽  
1976 ◽  
Vol 25 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Copper Base ◽  
High Speeds ◽  
High Lead

Abstract FEDERAL BRONZE 822 is a copper-base, high-lead bearing bronze with superior resistance to scoring and seizure beyond the endurance and danger limits of ordinary bearing bronzes. It is used in applications involving high speeds, poor lubrication, heat-generating loads, elevated temperatures, dusty and gritty surroundings, or where a liquid other than oil is used as the lubricant. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-324. Producer or source: Federal Bronze Products Inc..

CARPENTER T-K

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Carpenter T-K is a tungsten-chromium type hot-work steel having good red-hardness and resistance to abrasion. It will withstand high operating temperatures up to 1000 F for long periods. It is recommended for hot shear blades, forging and extrusion dies, hot compression tools, and similar applications where high compressive strength and wear resistance at elevated temperatures are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-219. Producer or source: Carpenter.

Effect of preset interfacial ZrB2 particles on the microstructure and properties of C/C-AlSi composites

2021 ◽  
pp. 002199832110046
Author(s):  
Wei Feng ◽  
Chengwei Tang ◽  
Lei Liu ◽  
Jian Chen ◽  
Yang Zhang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Thermal Expansion ◽  
Thermal Shock ◽  
Retention Rate ◽  
Pressure Infiltration ◽  
Micro Scale ◽  
Before And After ◽  
Micro Morphology ◽  
Strength Retention ◽  
Fiber Fabric

ZrB2 particles were preset to the C-AlSi interface to improve oxidation resistance of C/C preform and adjust the microstructure of the interpenetrated C/C-AlSi composite prepared through pressure infiltration of eutectic AlSi into a fiber fabric based porous C/C skeleton. Micro-morphology investigations suggested that the AlSi textures were changed from dendritic to petals-like state, and the nano to micro-scale ZrB2 particles were dispersed into AlSi and affected the distribution of Al and Si nearby carbon. Tests demonstrated that C/C-AlSi have slight lower density and thermal expansion coefficient, and higher original compressive strength, while C/C-ZrB2-AlSi composites presented an outstanding strength retention rate after thermal shock. Fracture and micro-morphology indicated that the influence of the preset ZrB2 to the interface of carbon and alloy greatly affected the generation and propagation of cracks, which determined the diverse compression behaviors of the composites before and after thermal shock.

scholarly journals Fire Resistance Behaviour of Geopolymer Concrete:An Overview

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar
Keyword(s):  
Compressive Strength ◽  
Thermal Resistance ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Construction Materials ◽  
Flexural Behavior ◽  
Thermal Shrinkage ◽  
Physico Chemical ◽  
The Impact ◽  
Loss Of Strength

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.

Effects of Elevated Temperatures on the Compressive Strength of HFCC

2011 ◽  
Vol 261-263 ◽  
pp. 416-420 ◽  
Author(s):  
Fu Ping Jia ◽  
Heng Lin Lv ◽  
Yi Bing Sun ◽  
Bu Yu Cao ◽  
Shi Ning Ding
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Fly Ash ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Relative Strength ◽  
Ordinary Concrete ◽  
Residual Compressive Strength ◽  
Fly Ash Concrete ◽  
The Relationship

This paper presents the results of elevated temperatures on the compressive of high fly ash content concrete (HFCC). The specimens were prepared with three different replacements of cement by fly ash 30%, 40% and 50% by mass and the residual compressive strength was tested after exposure to elevated temperature 250, 450, 550 and 650°C and room temperature respectively. The results showed that the compressive strength apparently decreased with the elevated temperature increased. The presence of fly ash was effective for improvement of the relative strength, which was the ratio of residual compressive strength after exposure to elevated temperature and ordinary concrete. The relative compressive strength of fly ash concrete was higher than those of ordinary concrete. Based on the experiments results, the alternating simulation formula to determine the relationship among relative strength, elevated temperature and fly ash replacement is developed by using regression of results, which provides the theoretical basis for the evaluation and repair of HFCC after elevated temperature.

scholarly journals Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 510
Author(s):  
Seyed Esmaeil Mohammadyan-Yasouj ◽  
Hossein Abbastabar Ahangar ◽  
Narges Ahevani Oskoei ◽  
Hoofar Shokravi ◽  
Seyed Saeid Rahimian Koloor ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Vinyl Ester ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Basalt Fiber ◽  
Polymer Concrete ◽  
Strength Increase ◽  
Extensive Literature ◽  
Polymer Binders ◽  
Preliminary Phase

Polymer concrete contains aggregates and a polymeric binder such as epoxy, polyester, vinyl ester, or normal epoxy mixture. Since polymer binders in polymer concrete are made of organic materials, they have a very low heat and fire resistance compared to minerals. This paper investigates the effect of basalt fibers (BF) and alginate on the compressive strength of polymer concrete. An extensive literature review was completed, then two experimental phases including the preliminary phase to set the appropriate mix design, and the main phase to investigate the compressive strength of samples after exposure to elevated temperatures of 100 °C, 150 °C, and 180 °C were conducted. The addition of BF and/or alginate decreases concrete compressive strength under room temperature, but the addition of BF and alginate each alone leads to compressive strength increase during exposure to heat and increase in the temperature to 180 °C showed almost positive on the compressive strength. The addition of BF and alginate both together increases the rate of strength growth of polymer concrete under heat from 100 °C to 180 °C. In conclusion, BF and alginate decrease the compressive strength of polymer concretes under room temperature, but they improve the resistance against raised temperatures.

Isothermal Fatigue Behavior and Damage Modeling of a High Temperature Woven PMC

1999 ◽  
Vol 122 (1) ◽  
pp. 62-68 ◽  
Author(s):  
A. L. Gyekenyesi
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Elevated Temperatures ◽  
Fatigue Behavior ◽  
Stiffness Degradation ◽  
Fatigue Properties ◽  
Residual Compressive Strength ◽  
Stiffness Reduction ◽  
Fatigue Damage Accumulation ◽  
Strength Tests

This study focuses on the fully reversed fatigue behavior exhibited by a carbon fiber/polyimide resin woven laminate at room and elevated temperatures. Nondestructive video edge view microscopy and destructive sectioning techniques were used to study the microscopic damage mechanisms that evolved. The elastic stiffness was monitored and recorded throughout the fatigue life of the coupon. In addition, residual compressive strength tests were conducted on fatigue coupons with various degrees of damage as quantified by stiffness reduction. Experimental results indicated that the monotonic tensile properties were only minimally influenced by temperature, while the monotonic compressive and fully reversed fatigue properties displayed greater reductions due to the elevated temperature. The stiffness degradation, as a function of cycles, consisted of three stages; a short-lived high degradation period, a constant degradation rate segment covering the majority of the life, and a final stage demonstrating an increasing rate of degradation up to failure. Concerning the residual compressive strength tests at room and elevated temperatures, the elevated temperature coupons appeared much more sensitive to damage. At elevated temperatures, coupons experienced a much larger loss in compressive strength when compared to room temperature coupons with equivalent damage. The fatigue damage accumulation law proposed for the model incorporates a scalar representation for damage, but admits a multiaxial, anisotropic evolutionary law. The model predicts the current damage (as quantified by residual stiffness) and remnant life of a composite that has undergone a known load at temperature. The damage/life model is dependent on the applied multiaxial stress state as well as temperature. Comparisons between the model and data showed good predictive capabilities concerning stiffness degradation and cycles to failure. [S0742-4795(00)01001-2]

scholarly journals Impact of Elevated Temperatures on Strength Properties and Microstructure of Calcium Sulfoaluminate Paste

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6751
Author(s):  
Konrad A. Sodol ◽  
Łukasz Kaczmarek ◽  
Jacek Szer ◽  
Sebastian Miszczak ◽  
Mariusz Stegliński
Keyword(s):  
Compressive Strength ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Cooling System ◽  
Base Material ◽  
Visual Assessment ◽  
Strength Properties ◽  
Strength Parameters ◽  
Calcium Sulfoaluminate ◽  
Wide Range

This article is motivated by civil fire safety. Fire-prevention engineering demands a wide range of information about building materials including alternative cements, for instance CSA-cement. Because of exposure of the cement-base material to a high temperature, its strength properties deteriorate due to dehydration connected with phase and microstructure changes. Previous research indicated that the main endothermic reaction of CSA-based composite, dehydration of ettringite, might be used as a cooling system for a metal structure during fire-load. This article examines visual assessment, microstructure, density, as well as flexural and compressive strength parameters of CSA-based composite after isothermal heating at temperatures from 23 °C to 800 °C. The results of SEM/EDS investigations showed that the calcium sulfoaluminate paste may start partially re-sintering above 600 °C. Mechanical tests revealed significant reduction of strength parameters but residual compressive strength was maintained in the whole temperature range e.g., 8 MPa at 800 °C. Additionally, visual assessment of the specimens indicated that it might be possible to predict the material temperature heating based on the specific surface color. These findings add to the evidence of general knowledge about CSA hydrates.

scholarly journals Research on Mechanical Performance & Behaviour of Geopolymer Concrete Subjected to Elevated Temperatures

2019 ◽  
Vol 8 (2S8) ◽  
pp. 883-887
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Geopolymer Concrete ◽  
Sem Images ◽  
Before And After ◽  
Alkaline Conditions ◽  
Compressive Strength Of Concrete

The investigative studies on mechanical performance & behaviour, of Geopolymer Concrete (GPC) before and after the exposure to elevated temperatures (of 200 0 C -1000 0 C with an increment of 100 0 C). Indicate that the GPC Specimens Exhibited better Compressive strength at higher temperatures than that of those made by regular OPC Concrete with M30 Grade. The chronological changes in the geopolymeric structure upon exposure to these temperatures and their reflections on the thermal behaviour have also been explored. The SEM images indicate GPC produced by fly ash , metakaolin and silica fume, under alkaline conditions form Mineral binders that are not only non-flammable and but are also non-combustible resins and binders. Further the Observations drawn disclose that the mass and compressive strength of concrete gets reduced with increase in temperatures.

Sign in / Sign up

Export Citation Format

Share Document