A comprehensive comparative study of CdTe thin films grown on ultra-thin glass substrates by close-spaced sublimation and RF magnetron sputtering

2021 ◽  
Vol 293 ◽  
pp. 129655
Author(s):  
C. Doroody ◽  
K.S. Rahman ◽  
H.N. Rosly ◽  
M.N. Harif ◽  
K. Sopian ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Comparative Study ◽  
Rf Magnetron Sputtering ◽  
Thin Glass ◽  
Glass Substrates ◽  
Cdte Thin Films

scholarly journals Residual Oxygen Effects on the Properties of MoS2 Thin Films Deposited at Different Temperatures by Magnetron Sputtering

Crystals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1183
Author(s):  
Peiyu Wang ◽  
Xin Wang ◽  
Fengyin Tan ◽  
Ronghua Zhang
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Magnetron Sputtering ◽  
Deposition Rate ◽  
Deposition Temperature ◽  
Energy Dispersive Spectrometer ◽  
Rf Magnetron Sputtering ◽  
Glass Substrates ◽  
Different Temperatures ◽  
Oxygen Atoms

Molybdenum disulfide (MoS2) thin films were deposited at different temperatures (150 °C, 225 °C, 300 °C, 375 °C, and 450 °C) on quartz glass substrates and silicon substrates using the RF magnetron sputtering method. The influence of deposition temperature on the structural, optical, electrical properties and deposition rate of the obtained thin films was investigated by X-ray diffraction (XRD), Energy Dispersive Spectrometer (EDS), Raman, absorption and transmission spectroscopies, a resistivity-measuring instrument with the four-probe method, and a step profiler. It was found that the MoS2 thin films deposited at the temperatures of 150 °C, 225 °C, and 300 °C were of polycrystalline with a (101) preferred orientation. With increasing deposition temperatures from 150 °C to 300 °C, the crystallization quality of the MoS2 thin films was improved, the Raman vibrational modes were strengthened, the deposition rate decreased, and the optical transmission and bandgap increased. When the deposition temperature increased to above 375 °C, the molecular atoms were partially combined with oxygen atoms to form MoO3 thin film, which caused significant changes in the structural, optical, and electrical properties of the obtained thin films. Therefore, it was necessary to control the deposition temperature and reduce the contamination of oxygen atoms throughout the magnetron sputtering process.

scholarly journals Comparative Study of ZnO Thin Films Grown on Quartz Glass and Sapphire (001) Substrates by Means of Magnetron Sputtering and High-Temperature Annealing

2019 ◽  
Vol 9 (21) ◽  
pp. 4509
Author(s):  
Weijia Yang ◽  
Fengming Wang ◽  
Zeyi Guan ◽  
Pengyu He ◽  
Zhihao Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
High Temperature ◽  
Magnetron Sputtering ◽  
Comparative Study ◽  
Quartz Glass ◽  
Photoelectron Spectroscopy ◽  
Zno Thin Films ◽  
High Temperature Annealing ◽  
X Ray ◽  
Glass Substrates

In this work, we reported a comparative study of ZnO thin films grown on quartz glass and sapphire (001) substrates through magnetron sputtering and high-temperature annealing. Firstly, the ZnO thin films were deposited on the quartz glass and sapphire (001) substrates in the same conditions by magnetron sputtering. Afterwards, the sputtered ZnO thin films underwent an annealing process at 600 °C for 1 h in an air atmosphere to improve the quality of the films. X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectra, photoluminescence spectra, and Raman spectra were used to investigate the structural, morphological, electrical, and optical properties of the both as-received ZnO thin films. The ZnO thin films grown on the quartz glass substrates possess a full width of half maximum value of 0.271° for the (002) plane, a surface root mean square value of 0.50 nm and O vacancies/defects of 4.40% in the total XPS O 1s peak. The comparative investigation reveals that the whole properties of the ZnO thin films grown on the quartz glass substrates are comparable to those grown on the sapphire (001) substrates. Consequently, ZnO thin films with high quality grown on the quartz glass substrates can be achieved by means of magnetron sputtering and high-temperature annealing at 600 °C.

Synthesis and Characterization of Nb-Doped TiO2 Thin Films Prepared by RF Magnetron Sputtering

2015 ◽  
Vol 1117 ◽  
pp. 139-142 ◽  
Author(s):  
Marius Dobromir ◽  
Radu Paul Apetrei ◽  
A.V. Rogachev ◽  
Dmitry L. Kovalenko ◽  
Dumitru Luca
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Rf Magnetron Sputtering ◽  
X Ray ◽  
Force Microscopy ◽  
Glass Substrates ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Diffraction Patterns

Amorphous Nb-doped TiO2 thin films were deposited on (100) Si and glass substrates at room temperature by RF magnetron sputtering and a mosaic-type Nb2O5-TiO2 sputtering target. To adjust the amount of the niobium dopant in the film samples, appropriate numbers of Nb2O5 pellets were placed on the circular area of the magnetron target with intensive sputtering. By adjusting the discharge conditions and the number of niobium oxide pellets, films with dopant content varying between 0 and 16.2 at.% were prepared, as demonstrated by X-ray photoelectron spectroscopy data. The X-ray diffraction patterns of the as-deposited samples showed the lack of crystalline ordering in the samples. Surfaces roughness and energy band gap values increase with dopant concentration, as showed by atomic force microscopy and UV-Vis spectroscopy measurements.

Microstructural and Properties of P-type Nickel Oxide (NiO) Thin Films Deposited by RF Magnetron Sputtering

2018 ◽  
Vol 24 (8) ◽  
pp. 5866-5871 ◽  
Author(s):  
G Balakrishnan ◽  
J. S. Ram Vinoba ◽  
R Rishaban ◽  
S Nathiya ◽  
O. S. Nirmal Ghosh
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Nickel Oxide ◽  
High Mobility ◽  
Rf Magnetron Sputtering ◽  
X Ray Diffraction ◽  
Glass Substrates ◽  
Type Semiconductor ◽  
P Type ◽  
Nio Films

Nickel oxide (NiO) thin films were deposited on glass substrates using the RF magnetron sputtering technique at room temperature. The Argon and oxygen flow rates were kept constant at 10 sccm and 5 sccm respectively. The films were annealed at various temperatures (RT-300 °C) and its influence on the microstructural, optical and electrical properties were investigated. The X-ray diffraction (XRD) investigation of NiO films indicated the polycrystallinity of the films with the (111), (200) and (220) reflections corresponding to the cubic structure of NiO films. The crystallite size of NiO films was in the range ~4–14 nm. The transmittance of the films increased from 20 to 75% with increasing annealed temperature. The optical band gap of the films was 3.6–3.75 eV range for the as-deposited and annealed films. The Hall effect studies indicated the p-type conductivity of films and the film annealed at 300 °C showed higher carrier concentration (N), high conductivity (σ) and high mobility (μ) compared to other films. These NiO films can be used as a P-type semiconductor material in the devices require transparent conducting films.

scholarly journals NO2 Sensing Properties of WO3 Thin Films Deposited by Rf-Magnetron Sputtering

2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Savita Sharma ◽  
Monika Tomar ◽  
Nitin K. Puri ◽  
Vinay Gupta
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Gas Sensing ◽  
Rf Magnetron Sputtering ◽  
X Ray Diffraction ◽  
Sensing Properties ◽  
Glass Substrates ◽  
Corning Glass ◽  
Interdigital Electrodes ◽  
Wo3 Thin Films

Tungsten trioxide (WO3) thin films were deposited by Rf-magnetron sputtering onto Pt interdigital electrodes fabricated on corning glass substrates. NO2 gas sensing properties of the prepared WO3 thin films were investigated by incorporation of catalysts (Sn, Zn, and Pt) in the form of nanoclusters. The structural and optical properties of the deposited WO3 thin films have been studied by X-ray diffraction (XRD) and UV-Visible spectroscopy, respectively. The gas sensing characteristics of all the prepared sensor structures were studied towards 5 ppm of NO2 gas. The maximum sensing response of about 238 was observed for WO3 film having Sn catalyst at a comparatively lower operating temperature of 200°C. The possible sensing mechanism has been highlighted to support the obtained results.

EFFECT OF THICKNESS ON THE PROPERTIES OF In-DOPED ZnO THIN FILMS PREPARED BY RF MAGNETRON SPUTTERING

2011 ◽  
Vol 25 (07) ◽  
pp. 995-1003 ◽  
Author(s):  
L. P. PENG ◽  
L. FANG ◽  
X. F. YANG ◽  
Q. L. HUANG ◽  
F. WU ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Film Thickness ◽  
Visible Region ◽  
Hexagonal Wurtzite Structure ◽  
Rf Magnetron Sputtering ◽  
Transparent Electrode ◽  
Visible Range ◽  
Electrical And Optical Properties ◽  
Glass Substrates

In-doped zinc oxide ( ZnO:In ) thin films with thickness from 157 nm to 592 nm have been deposited on glass substrates by radio frequency (RF) magnetron sputtering. The effect of the film thickness on the structural, electrical and optical properties of ZnO:In thin films has been investigated. It is found that the films are hexagonal wurtzite structure with c-axis perpendicular to the substrate, and with increasing thickness, the crystallinity, the grains size and the conductivity of the films increases, but the strains along c-axis and the transmittance decrease. The decrease of the resistivity in a thicker film is attributed to the slight increase of the carrier concentration and the significant increase of Hall mobility. The transmittance of all the films is over 80% in the visible region (400–800 nm) and the band gap decrease with the increase of film thickness. The film with the thickness of around 303 nm has the resistivity of 6.07 × 10-3 Ω⋅ cm and the transmittance of 90% in the visible range. Based on the good conductivity and high transmittance, the ZnO:In films prepared by magnetron sputtering can be regarded as a potential transparent electrode.

Effect of Substrate Temperature on the Opto-Electrical Propertites of Ti Doped ITO Films Deposited by RF Magnetron Sputtering

2012 ◽  
Vol 602-604 ◽  
pp. 1399-1403
Author(s):  
Rui Xin Ma ◽  
Shi Na Li ◽  
Guo Quan Suo
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Magnetron Sputtering ◽  
Substrate Temperature ◽  
Absorption Edge ◽  
Blue Shift ◽  
Rf Magnetron Sputtering ◽  
Electrical And Optical Properties ◽  
Glass Substrates ◽  
Visible Wavelengths

Ti doped ITO (ITO:Ti) thin films were fabricated on glass substrates by RF magnetron sputtering using only one piece of ITO:Ti ceramic target at different substrate temperature (Ts). The effect of substrate temperature on structural, electrical, and optical properties of the films was investigated. It is confirmed that the resistivity of the films decreases with the increase of Ts till the minimum value of 2.5×10-4 Ω•cm and the transmittance in visible wavelengths is higher than 90%. "Blue shift" and "red shift" of UV absorption edge of the film were observed when Ts200 °CHeaders and footers

Sign in / Sign up

Export Citation Format

Share Document