Uniform long focal depth with centimeter-scale range produced by an aspherical mirror

2019 ◽  
Vol 453 ◽  
pp. 124342
Author(s):  
Quanping Fan ◽  
Shaoyi Wang ◽  
Lai Wei ◽  
Zuhua Yang ◽  
Qiangqiang Zhang ◽  
...  
2003 ◽  
Vol 766 ◽  
Author(s):  
Vineet Sharma ◽  
Arief B. Suriadi ◽  
Frank Berauer ◽  
Laurie S. Mittelstadt

AbstractNormal photolithography tools have focal depth limitations and are unable to meet the expectations of high resolution photolithography on highly topographic structures. This paper shows a cost effective and promising technique of combining two different approaches to achieve critical dimensions of traces on slope pattern continuity on highly topographic structures. Electrophoretically deposited photoresist is used on 3-D structured wafers. This photoresist coating technique is fairly known in the MEMS industries to achieve uniform and conformal photoresist films on 3D surfaces. Multi step exposures are used to expose electrophoretically deposited photoresist. AlCu (Cu-0.5%), 0.47-0.53 μm thick metal film is deposited on 3D structured silicon substrate to plate photoresist. By combining these two novel methods, metal (AlCu) traces of 75 μm line width and 150 μm pitch (from top flat to down the slope) have been demonstrated on isotropically etched 350 μm deep trenches with 5-10% line width loss.


Author(s):  
Zahra Al-Timimi

Many considerable investigations focused on the stimulation of therapeutic manners of infected injuries in mice. The exaggerated pathogens that induced wounds were gram-positive like staphylococcal and gram-negative, for example, Pseudomonas aeuroginosa and Acinetobacter baumannii. Acinetobacter can generate a scale range of an infection that may be received in a hospital or any wellness concern facility. In order to know the significance of laser 532 nm with a constant irradiance at various exposure times on the healing process of wounds infected by Acinetobacter baumannii, this study was performed on the BALB/C mice. An elliptical full-thickness skin injury was made on the backside of 45 adult female (BALB/C) mice. Injuries were affected via Acinetobacter baumannii and were randomly assigned into 3 groups. Semiconductor diode continuous wave laser, λ = 532 nm, with output power 40 mW was used. The power density was 5.71 mW/cm2, while the fluencies were 1.7 J/cm2 and 5.14 J/cm2. Fifteen mice were classified according to the times of irradiation. The first group was infected and presented as control, without irradiation. The second group was infected and irradiated for 5 minutes. The third group, likewise, was infected but irradiated for 15 minutes. All groups were subdivided according to the following period, 3, 5, and 10 days, after irradiation and the animals were killed after the treatment. Wound healing was made by measuring the rate of wound closure and histopathological evaluation. The study determined that 532 nm laser therapy had an obvious and positive influence on the healing of infected wounds with fluence (5.14 J/cm2).


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Dora Henriques ◽  
Ana R. Lopes ◽  
Nor Chejanovsky ◽  
Anne Dalmon ◽  
Mariano Higes ◽  
...  

AbstractWith a growing number of parasites and pathogens experiencing large-scale range expansions, monitoring diversity in immune genes of host populations has never been so important because it can inform on the adaptive potential to resist the invaders. Population surveys of immune genes are becoming common in many organisms, yet they are missing in the honey bee (Apis mellifera L.), a key managed pollinator species that has been severely affected by biological invasions. To fill the gap, here we identified single nucleotide polymorphisms (SNPs) in a wide range of honey bee immune genes and developed a medium-density assay targeting a subset of these genes. Using a discovery panel of 123 whole-genomes, representing seven A. mellifera subspecies and three evolutionary lineages, 180 immune genes were scanned for SNPs in exons, introns (< 4 bp from exons), 3’ and 5´UTR, and < 1 kb upstream of the transcription start site. After application of multiple filtering criteria and validation, the final medium-density assay combines 91 quality-proved functional SNPs marking 89 innate immune genes and these can be readily typed using the high-sample-throughput iPLEX MassARRAY system. This medium-density-SNP assay was applied to 156 samples from four countries and the admixture analysis clustered the samples according to their lineage and subspecies, suggesting that honey bee ancestry can be delineated from functional variation. In addition to allowing analysis of immunogenetic variation, this newly-developed SNP assay can be used for inferring genetic structure and admixture in the honey bee.


Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5066
Author(s):  
José Miguel Fuster ◽  
Sergio Pérez-López ◽  
Francisco Belmar ◽  
Pilar Candelas

In this work, we analyze the effect of predistortion techniques on the focusing profile of Fresnel Zone Plates (FZPs) in ultrasound applications. This novel predistortion method is based on either increasing or decreasing the width of some of the FZP Fresnel rings by a certain amount. We investigate how the magnitude of the predistortion, as well as the number and location of the predistorted rings, influences the lens focusing profile. This focusing profile can be affected in different ways depending on the area of the lens where the predistortion is applied. It is shown that when the inner area of the lens, closer to its center, is predistorted, this technique allows the control of the focal depth at the main focus. However, when the predistortion is applied to an area farther from the center of the lens, the acoustic intensity distribution among the main focus and the closest adjacent secondary foci can be tailored at a certain degree. This predistortion technique shows great potential and can be used to control, modify and shape the FZP focusing profile in both industrial and therapeutic applications.


2020 ◽  
Vol 110 (3) ◽  
pp. 1090-1100
Author(s):  
Ronia Andrews ◽  
Kusala Rajendran ◽  
N. Purnachandra Rao

ABSTRACT Oceanic plate seismicity is generally dominated by normal and strike-slip faulting associated with active spreading ridges and transform faults. Fossil structural fabrics inherited from spreading ridges also host earthquakes. The Indian Oceanic plate, considered quite active seismically, has hosted earthquakes both on its active and fossil fault systems. The 4 December 2015 Mw 7.1 normal-faulting earthquake, located ∼700  km south of the southeast Indian ridge in the southern Indian Ocean, is a rarity due to its location away from the ridge, lack of association with any mapped faults and its focal depth close to the 800°C isotherm. We present results of teleseismic body-wave inversion that suggest that the earthquake occurred on a north-northwest–south-southeast-striking normal fault at a depth of 34 km. The rupture propagated at 2.7  km/s with compact slip over an area of 48×48  km2 around the hypocenter. Our analysis of the background tectonics suggests that our chosen fault plane is in the same direction as the mapped normal faults on the eastern flanks of the Kerguelen plateau. We propose that these buried normal faults, possibly the relics of the ancient rifting might have been reactivated, leading to the 2015 midplate earthquake.


2013 ◽  
Vol 59 (215) ◽  
pp. 467-479 ◽  
Author(s):  
Jeffrey S. Deems ◽  
Thomas H. Painter ◽  
David C. Finnegan

AbstractLaser altimetry (lidar) is a remote-sensing technology that holds tremendous promise for mapping snow depth in snow hydrology and avalanche applications. Recently lidar has seen a dramatic widening of applications in the natural sciences, resulting in technological improvements and an increase in the availability of both airborne and ground-based sensors. Modern sensors allow mapping of vegetation heights and snow or ground surface elevations below forest canopies. Typical vertical accuracies for airborne datasets are decimeter-scale with order 1 m point spacings. Ground-based systems typically provide millimeter-scale range accuracy and sub-meter point spacing over 1 m to several kilometers. Many system parameters, such as scan angle, pulse rate and shot geometry relative to terrain gradients, require specification to achieve specific point coverage densities in forested and/or complex terrain. Additionally, snow has a significant volumetric scattering component, requiring different considerations for error estimation than for other Earth surface materials. We use published estimates of light penetration depth by wavelength to estimate radiative transfer error contributions. This paper presents a review of lidar mapping procedures and error sources, potential errors unique to snow surface remote sensing in the near-infrared and visible wavelengths, and recommendations for projects using lidar for snow-depth mapping.


Optik ◽  
2015 ◽  
Vol 126 (23) ◽  
pp. 3549-3553
Author(s):  
Chao Xie ◽  
Junfeng Cui ◽  
Yanming Liang

2008 ◽  
Vol 604 ◽  
pp. 165-174 ◽  
Author(s):  
XAVIER CAPET ◽  
PATRICE KLEIN ◽  
BACH LIEN HUA ◽  
GUILLAUME LAPEYRE ◽  
JAMES C. MCWILLIAMS

The relevance of surface quasi-geostrophic dynamics (SQG) to the upper ocean and the atmospheric tropopause has been recently demonstrated in a wide range of conditions. Within this context, the properties of SQG in terms of kinetic energy (KE) transfers at the surface are revisited and further explored. Two well-known and important properties of SQG characterize the surface dynamics: (i) the identity between surface velocity and density spectra (when appropriately scaled) and (ii) the existence of a forward cascade for surface density variance. Here we show numerically and analytically that (i) and (ii) do not imply a forward cascade of surface KE (through the advection term in the KE budget). On the contrary, advection by the geostrophic flow primarily induces an inverse cascade of surface KE on a large range of scales. This spectral flux is locally compensated by a KE source that is related to surface frontogenesis. The subsequent spectral budget resembles those exhibited by more complex systems (primitive equations or Boussinesq models) and observations, which strengthens the relevance of SQG for the description of ocean/atmosphere dynamics near vertical boundaries. The main weakness of SQG however is in the small-scale range (scales smaller than 20–30 km in the ocean) where it poorly represents the forward KE cascade observed in non-QG numerical simulations.


2008 ◽  
Vol 55 (17) ◽  
pp. 2857-2863 ◽  
Author(s):  
Maojin Yun ◽  
El-Hang Lee
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document