Investigation of aerodynamic coefficients at Mach 6 over conical, hemispherical and flat-face spiked body

2017 ◽  
Vol 121 (1245) ◽  
pp. 1711-1732 ◽  
Author(s):  
R. Kalimuthu ◽  
R. C. Mehta ◽  
E. Rathakrishnan
Keyword(s):  
Flow Field ◽  
Blunt Body ◽  
Angle Of Attack ◽  
Separated Flow ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Geometrical Parameters ◽  
Aerodynamic Coefficients ◽  
Aerodynamic Forces ◽  
Flow Field Characteristics

ABSTRACTA forward spike attached to a blunt body significantly alters its flow field characteristics and influences aerodynamic characteristics at hypersonic flow due to formation of separated flow and re-circulation region around the spiked body. An experimental investigation was performed to measure aerodynamic forces for spikes blunt bodies with a conical, hemispherical and flat-face spike at Mach 6 and at an angle-of-attack range from 0° to 8° and length-to-diameterL/Dratio of spike varies from 0.5 to 2.0, whereLis the length of the spike andDis diameter of blunt body. The shape of the leading edge of the spiked blunt body reveals different types of flow field features in the formation of a shock wave, shear layer, flow separation, re-circulation region and re-attachment shock. They are analysed with the help of schlieren pictures. The shock distance ahead of the hemisphere and the flat-face spike is compared with the analytical solution and is showing satisfactory agreement with the schlieren pictures. The influence of geometrical parameters of the spike, the shape of the spike tip and angle-of-attack on the aerodynamic coefficients are investigated by measuring aerodynamic forces in a hypersonic wind tunnel. It is found that a maximum reduction of drag of about 77% was found for hemisphere spike ofL/D= 2.0 at zero angle-of-attack. Consideration for compensation of increased pitching moment is required to stabilise the aerodynamic forces.

scholarly journals Analysis on Flow Field Characteristics of Airfoil in Pitching Motion

2021 ◽  
Vol 2076 (1) ◽  
pp. 012069
Author(s):  
Rui Yin ◽  
Jing Huang ◽  
Zhi-Yuan He
Keyword(s):  
Flow Field ◽  
Drag Coefficient ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Decisive Role ◽  
Aerodynamic Characteristics ◽  
Pitching Motion ◽  
Maximum Value ◽  
Flow Field Characteristics ◽  
Lift And Drag

Abstract Based on CFD, the flow field characteristics of NACA4412 airfoil are analyzed under pitching motion, and its aerodynamic characteristics are interpreted. The results show that streamline changes on the upper surface of the airfoil play a decisive role in the aerodynamic characteristics. The interaction between the vortex leads to fluctuations in the lift and drag coefficients. Under a big angle of attack, the secondary trailing vortex on the upper surface of the airfoil adheres to the trailing edge of the airfoil, resulting in an increased drag coefficient. Under a small angle of attack, the secondary trailing vortex can break away from the airfoil. The lift coefficient reaches the maximum value of 2.961 before the airfoil is turned upside down, and the drag coefficient reaches the maximum value of 1.515 after the airfoil is turned upside down, but the corresponding angles of attack of the two are equal.

scholarly journals Leading-Edge Roughness Affecting Diamond-Wing Aerodynamic Characteristics

Aerospace ◽  
2018 ◽  
Vol 5 (3) ◽  
pp. 98 ◽  
Author(s):  
Andrei Buzica ◽  
Lisa Debschütz ◽  
Florian Knoth ◽  
Christian Breitsamter
Keyword(s):  
Reynolds Number ◽  
Surface Pressure ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Coefficients ◽  
Number Range ◽  
Edge Roughness ◽  
Vortex Separation ◽  
Roughness Size

Diamond wing configurations for low signature vehicles have been studied in recent years. Yet, despite numerous research on highly swept, sharp edged wings, little research on aerodynamics of semi-slender wings with blunt leading-edges exists. This paper reports on the stall characteristics of the AVT-183 diamond wing configuration with variation of leading-edge roughness size and Reynolds number. Wind tunnel testing applying force and surface pressure measurements are conducted and the results presented and analysed. For the investigated Reynolds number range of 2.1 × 10 6 ≤ R e ≤ 2.7 × 10 6 there is no significant influence on the aerodynamic coefficients. However, leading-edge roughness height influences the vortex separation location. Trip dots produced the most downstream located vortex separation onset. Increasing the roughness size shifts the separation onset upstream. Prior to stall, global aerodynamic coefficients are little influenced by leading-edge roughness. In contrast, maximum lift and maximum angle of attack is reduced with increasing disturbance height. Surface pressure fluctuations show dominant broadband frequency peaks, distinctive for moderate sweep vortex breakdown. The experimental work presented here provides insights into the aerodynamic characteristics of diamond wings in a wide parameter space including a relevant angle of attack range up to post-stall.

scholarly journals A large-eddy simulation on a deep-stalled aerofoil with a wavy leading edge

2017 ◽  
Vol 813 ◽  
pp. 23-52 ◽  
Author(s):  
Rafael Pérez-Torró ◽  
Jae Wook Kim
Keyword(s):  
Vortex Shedding ◽  
Flow Characteristics ◽  
Leading Edge ◽  
Domain Size ◽  
Aerodynamic Characteristics ◽  
Streamwise Vortices ◽  
Aerodynamic Forces ◽  
Laminar Separation ◽  
Eddy Simulation ◽  
Large Eddy

A numerical investigation on the stalled flow characteristics of a NACA0021 aerofoil with a sinusoidal wavy leading edge (WLE) at chord-based Reynolds number $Re_{\infty }=1.2\times 10^{5}$ and angle of attack $\unicode[STIX]{x1D6FC}=20^{\circ }$ is presented in this paper. It is observed that laminar separation bubbles (LSBs) form at the trough areas of the WLE in a collocated fashion rather than uniformly/periodically distributed over the span. It is found that the distribution of LSBs and their influence on the aerodynamic forces is strongly dependent on the spanwise domain size of the simulation, i.e. the wavenumber of the WLE used. The creation of a pair of counter-rotating streamwise vortices from the WLE and their evolution as an interface/buffer between the LSBs and the adjacent fully separated shear layers are discussed in detail. The current simulation results confirm that an increased lift and a decreased drag are achieved by using the WLEs compared to the straight leading edge (SLE) case, as observed in previous experiments. Additionally, the WLE cases exhibit a significantly reduced level of unsteady fluctuations in aerodynamic forces at the frequency of periodic vortex shedding. The beneficial aerodynamic characteristics of the WLE cases are attributed to the following three major events observed in the current simulations: (i) the appearance of a large low-pressure zone near the leading edge created by the LSBs; (ii) the reattachment of flow behind the LSBs resulting in a decreased volume of the rear wake; and, (iii) the deterioration of von-Kármán (periodic) vortex shedding due to the breakdown of spanwise coherent structures.

scholarly journals Aerodynamic Detuning Analysis of an Unstalled Supersonic Turbofan Cascade

1986 ◽  
Vol 108 (1) ◽  
pp. 60-67 ◽  
Author(s):  
D. Hoyniak ◽  
S. Fleeter
Keyword(s):  
Flow Field ◽  
Leading Edge ◽  
Rotor Blades ◽  
Driving Mechanism ◽  
Aeroelastic Stability ◽  
Aerodynamic Forces ◽  
Unsteady Aerodynamic ◽  
Influence Coefficients ◽  
Blade Row ◽  
The Stability

A new, and as yet unexplored, approach to passive flutter control is aerodynamic detuning, defined as designed passage-to-passage differences in the unsteady aerodynamic flow field of a rotor blade row. Thus, aerodynamic detuning directly affects the fundamental driving mechanism for flutter, i.e., the unsteady aerodynamic forces and moments acting on individual rotor blades. In this paper, a model to demonstrate the enhanced supersonic unstalled aeroelastic stability associated with aerodynamic detuning is developed. The stability of an aerodynamically detuned cascade operating in a supersonic inlet flow field with a subsonic leading edge locus is analyzed, with the aerodynamic detuning accomplished by means of nonuniform circumferential spacing of adjacent rotor blades. The unsteady aerodynamic forces and moments on the blading are defined in terms of influence coefficients in a manner that permits the stability of both a conventional uniformly spaced rotor configuration as well as the detuned nonuniform circumferentially spaced rotor to be determined. With Verdon’s uniformly spaced Cascade B as a baseline, this analysis is then utilized to demonstrate the potential enhanced aeroelastic stability associated with this particular type of aerodynamic detuning.

Experimental Aerodynamic Characteristics of a Compound Wing in Ground Effect

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
Saeed Jamei ◽  
Adi Maimun Abdul Malek ◽  
Shuhaimi Mansor ◽  
Nor Azwadi Che Sidik ◽  
Agoes Priyanto
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Center Of Pressure ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Ground Effect ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Ground Clearance

Wing configuration is a parameter that affects the performance of wing-in-ground effect (WIG) craft. In this study, the aerodynamic characteristics of a new compound wing were investigated during ground effect. The compound wing was divided into three parts with a rectangular wing in the middle and two reverse taper wings with anhedral angle at the sides. The sectional profile of the wing model is NACA6409. The experiments on the compound wing and the rectangular wing were carried to examine different ground clearances, angles of attack, and Reynolds numbers. The aerodynamic coefficients of the compound wing were compared with those of the rectangular wing, which had an acceptable increase in its lift coefficient at small ground clearances, and its drag coefficient decreased compared to rectangular wing at a wide range of ground clearances, angles of attack, and Reynolds numbers. Furthermore, the lift to drag ratio of the compound wing improved considerably at small ground clearances. However, this improvement decreased at higher ground clearance. The drag polar of the compound wing showed the increment of lift coefficient versus drag coefficient was higher especially at small ground clearances. The Reynolds number had a gradual effect on lift and drag coefficients and also lift to drag of both wings. Generally, the nose down pitching moment of the compound wing was found smaller, but it was greater at high angle of attack and Reynolds number for all ground clearance. The center of pressure was closer to the leading edge of the wing in contrast to the rectangular wing. However, the center of pressure of the compound wing was later to the leading edge at high ground clearance, angle of attack, and Reynolds number.

scholarly journals Method of approximation of ballistic missile aerodynamic characteristics at the powered flight segment depending on the Mach number and angle of attack

2021 ◽  
pp. 57-63
Author(s):  
P. A. Krasheninnikov
Keyword(s):  
Mach Number ◽  
Drag Coefficient ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Ballistic Missile ◽  
Aerodynamic Coefficients ◽  
Calculation Process ◽  
The Impact

The paper describes the impact of aerodynamic coefficients on the ballistic target (BT) velocity and proposes a method of approximation of the dependence of ballistic target drag coefficient Cxa on the Mach number and angle of attack. The paper proves that the proposed approach allows to substantially reduce errors in drag coefficient simulation, but requires a more complicated calculation process.

scholarly journals Analisis karakteristik aerodinamika telescopic wing dengan konfigurasi sayap flying wing dan glider menggunakan metode pendekatan simulasi CFD

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Azhim Asyratul Azmi ◽  
Satriawan Dini Hariyanto ◽  
Arif Hidayat
Keyword(s):  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Morphing Wing ◽  
Aircraft Wing ◽  
High Lift ◽  
Tip Vortices ◽  
Wing Tip

A telescopic wing is a shape-changing method of the aircraft wing known as the morphing wing system. Wingspan extends capability on telescopic wing increasing the aspect ratio to get a high lift force. The telescopic wing on a flying wing configuration as an external wing and glider wing as an internal wing can be used to increase the coefficient lift (CL) when carrying out special missions. The aerodynamic characteristics using the Computational Fluid Dynamic (CFD) simulation approach is presented. For the 40% internal wingspan, the highest CL increment was 12.9% at a 10o angle of attack. For the 50% internal wingspan, the highest CL increment was 14.9% at a 10o angle of attack. on the 40% internal wing, the highest coefficient drag (CD) increment was 4.7%, and the largest CD increment on 50% internal was 9.5% at the angle of attack of 20o. The pressure distribution along the internal wingspan was uneven from an angle of attack of 15o due to the wing tip vortices of the external wing. Streamline pattern shown a bubble separation from the leading edge at an internal wing root by external wing tip vortices.Keywords: Morphing wing, telescopic wing, flying wing, glider

A Study of the Flow Field Associated with a Steadily-Rolling Slender Delta Wing

1964 ◽  
Vol 68 (638) ◽  
pp. 106-110 ◽  
Author(s):  
J. K. Harvey
Keyword(s):  
Flow Field ◽  
Static Pressure ◽  
Delta Wing ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Rolling Moment ◽  
Air Stream ◽  
Total Head ◽  
Theoretical Predictions ◽  
Attached Flow

SummaryIn this paper an experiment is described in which a detailed study was made of the flow field associated with a slender sharp-edged delta wing which was rolling steadily at zero angle of attack to an air stream. The investigation was made by performing two pressure surveys: first , one of the static pressure acting on the wing’s surface and second by measuring the total-head distribution in the neighbourhood of the wing. From the former the local rolling-moment coefficients, Clp, are evaluated and these are compared with the predictions for attached flow, thus assessing the contributions to the forces acting on the wing which arise as a consequence of the leading-edge separations. The second set of surveys is used to construct a picture of the flow-field details and this is compared with that known to occur on a similar wing when it is set at an angle of attack to the airstream. One interesting finding is that the secondary separation which appears to cause the discrepancy between the theoretical predictions and the measurements made on slender wings at incidence, is absent in this configuration and thus it is concluded that these data could be used for a more meaningful test of the theory.

Sign in / Sign up

Export Citation Format

Share Document