scholarly journals Method of approximation of ballistic missile aerodynamic characteristics at the powered flight segment depending on the Mach number and angle of attack

2021 ◽  
pp. 57-63
Author(s):  
P. A. Krasheninnikov
Keyword(s):  
Mach Number ◽  
Drag Coefficient ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Ballistic Missile ◽  
Aerodynamic Coefficients ◽  
Calculation Process ◽  
The Impact

The paper describes the impact of aerodynamic coefficients on the ballistic target (BT) velocity and proposes a method of approximation of the dependence of ballistic target drag coefficient Cxa on the Mach number and angle of attack. The paper proves that the proposed approach allows to substantially reduce errors in drag coefficient simulation, but requires a more complicated calculation process.

Aerodynamic optimisation of the rocket plane in subsonic and supersonic flight conditions

2017 ◽  
Vol 231 (12) ◽  
pp. 2266-2281 ◽  
Author(s):  
Marcin Figat ◽  
Agnieszka Kwiek
Keyword(s):  
Mach Number ◽  
Main Part ◽  
Numerical Study ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Design ◽  
Supersonic Speed ◽  
Supersonic Flight ◽  
Special Vehicle ◽  
Speed Regime ◽  
The Impact

This paper presents the results of a numerical study of the aerodynamic shape of the Rocket Plane LEX. The Rocket Plane is a main part of the Modular Airplane System – MAS; a special vehicle devoted to suborbital tourist flights. The Rocket Plane was designed for subsonic and supersonic flight conditions. Therefore, the impact of the Mach number should be considered during the aerodynamic design of the Rocket Plane. The main goal of the investigation was to determine the sensitivity of the Rocket Plane aerodynamic characteristics to the Mach number during the optimisation of the LEX geometry. The paper includes results of the optimisation process for Mach number from the range Ma = 0.5 to Ma = 2.5. These results reveal that the aerodynamic characteristics of models optimised for the subsonic and transonic regime of Mach numbers (up to Ma = 1) were also improved for the supersonic speed regime. However, in the case of models optimised for the supersonic flight regime the aerodynamic characteristics in subsonic flight regime, are inferior compared to the model before the optimisation process.

Investigation of aerodynamic coefficients at Mach 6 over conical, hemispherical and flat-face spiked body

2017 ◽  
Vol 121 (1245) ◽  
pp. 1711-1732 ◽  
Author(s):  
R. Kalimuthu ◽  
R. C. Mehta ◽  
E. Rathakrishnan
Keyword(s):  
Flow Field ◽  
Blunt Body ◽  
Angle Of Attack ◽  
Separated Flow ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Geometrical Parameters ◽  
Aerodynamic Coefficients ◽  
Aerodynamic Forces ◽  
Flow Field Characteristics

ABSTRACTA forward spike attached to a blunt body significantly alters its flow field characteristics and influences aerodynamic characteristics at hypersonic flow due to formation of separated flow and re-circulation region around the spiked body. An experimental investigation was performed to measure aerodynamic forces for spikes blunt bodies with a conical, hemispherical and flat-face spike at Mach 6 and at an angle-of-attack range from 0° to 8° and length-to-diameterL/Dratio of spike varies from 0.5 to 2.0, whereLis the length of the spike andDis diameter of blunt body. The shape of the leading edge of the spiked blunt body reveals different types of flow field features in the formation of a shock wave, shear layer, flow separation, re-circulation region and re-attachment shock. They are analysed with the help of schlieren pictures. The shock distance ahead of the hemisphere and the flat-face spike is compared with the analytical solution and is showing satisfactory agreement with the schlieren pictures. The influence of geometrical parameters of the spike, the shape of the spike tip and angle-of-attack on the aerodynamic coefficients are investigated by measuring aerodynamic forces in a hypersonic wind tunnel. It is found that a maximum reduction of drag of about 77% was found for hemisphere spike ofL/D= 2.0 at zero angle-of-attack. Consideration for compensation of increased pitching moment is required to stabilise the aerodynamic forces.

Experimental Aerodynamic Characteristics of a Compound Wing in Ground Effect

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
Saeed Jamei ◽  
Adi Maimun Abdul Malek ◽  
Shuhaimi Mansor ◽  
Nor Azwadi Che Sidik ◽  
Agoes Priyanto
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Center Of Pressure ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Ground Effect ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Ground Clearance

Wing configuration is a parameter that affects the performance of wing-in-ground effect (WIG) craft. In this study, the aerodynamic characteristics of a new compound wing were investigated during ground effect. The compound wing was divided into three parts with a rectangular wing in the middle and two reverse taper wings with anhedral angle at the sides. The sectional profile of the wing model is NACA6409. The experiments on the compound wing and the rectangular wing were carried to examine different ground clearances, angles of attack, and Reynolds numbers. The aerodynamic coefficients of the compound wing were compared with those of the rectangular wing, which had an acceptable increase in its lift coefficient at small ground clearances, and its drag coefficient decreased compared to rectangular wing at a wide range of ground clearances, angles of attack, and Reynolds numbers. Furthermore, the lift to drag ratio of the compound wing improved considerably at small ground clearances. However, this improvement decreased at higher ground clearance. The drag polar of the compound wing showed the increment of lift coefficient versus drag coefficient was higher especially at small ground clearances. The Reynolds number had a gradual effect on lift and drag coefficients and also lift to drag of both wings. Generally, the nose down pitching moment of the compound wing was found smaller, but it was greater at high angle of attack and Reynolds number for all ground clearance. The center of pressure was closer to the leading edge of the wing in contrast to the rectangular wing. However, the center of pressure of the compound wing was later to the leading edge at high ground clearance, angle of attack, and Reynolds number.

scholarly journals Analysis on Flow Field Characteristics of Airfoil in Pitching Motion

2021 ◽  
Vol 2076 (1) ◽  
pp. 012069
Author(s):  
Rui Yin ◽  
Jing Huang ◽  
Zhi-Yuan He
Keyword(s):  
Flow Field ◽  
Drag Coefficient ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Decisive Role ◽  
Aerodynamic Characteristics ◽  
Pitching Motion ◽  
Maximum Value ◽  
Flow Field Characteristics ◽  
Lift And Drag

Abstract Based on CFD, the flow field characteristics of NACA4412 airfoil are analyzed under pitching motion, and its aerodynamic characteristics are interpreted. The results show that streamline changes on the upper surface of the airfoil play a decisive role in the aerodynamic characteristics. The interaction between the vortex leads to fluctuations in the lift and drag coefficients. Under a big angle of attack, the secondary trailing vortex on the upper surface of the airfoil adheres to the trailing edge of the airfoil, resulting in an increased drag coefficient. Under a small angle of attack, the secondary trailing vortex can break away from the airfoil. The lift coefficient reaches the maximum value of 2.961 before the airfoil is turned upside down, and the drag coefficient reaches the maximum value of 1.515 after the airfoil is turned upside down, but the corresponding angles of attack of the two are equal.

Study of Aerodynamic Characteristics of Cylindrical Bodies in a Supersonic Flow

2011 ◽  
Vol 6 (4) ◽  
pp. 16-24
Author(s):  
Vladimir Kornilov ◽  
Vladimir Lysenko
Keyword(s):  
Mach Number ◽  
Aspect Ratio ◽  
Stokes Equations ◽  
Aerodynamic Force ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Circular Cylinders ◽  
Coordinate Systems ◽  
Flow Parameters ◽  
Cylinder Drag

Analysis of experimental and computational aerodynamic characteristics of smooth flat-face circular cylinders with the aspect ratio of 0,6 to 12,0 is given. Studies have been carried out at Mach number М= 4 for the angle of attack range  = 0900 . Effect of the cylinder aspect ratio and angle of attack on aerodynamic force coefficients in wind axes- and body axes coordinate systems is shown. A number of distinctive peculiarities in the behavior of the cylinder drag coefficient are revealed. The results obtained are presented in a form of a unique generalized dependence. The computation of some flow parameters around a cylinder has been performed within the Navie – Stokes equations, results of which are compared with the flow visualization data

scholarly journals Effects of Vehicle Type and Inter-Vehicle Distance on Aerodynamic Characteristics during Vehicle Platooning

2021 ◽  
Vol 11 (9) ◽  
pp. 4096
Author(s):  
Wootaek Kim ◽  
Jongchan Noh ◽  
Jinwook Lee
Keyword(s):  
Drag Coefficient ◽  
Flow Simulation ◽  
Aerodynamic Characteristics ◽  
Rear Side ◽  
Vehicle Type ◽  
Vehicle Platooning ◽  
Wide Range ◽  
The Impact ◽  
Low Pressures ◽  
Utility Vehicle

Considering the future development in vehicle platooning technology and the multiple models pertaining to complex road environments involving freight cars and general vehicles, the speed and distance of a vehicle model were set as variables in this study. This study aimed at analyzing the effect of currents acting differently using SolidWorks Flow Simulation tool for the vehicle platooning between different models of trucks that are currently being studied actively and sports utility vehicle (SUV) whose market share has been increasing, in order to evaluate the changes in the drag coefficient and their causes. Additionally, purpose-based vehicle (PBV) presented by Hyundai Motor (Ulsan, Korea) during the CES 2020 was considered. In this study, we found that the shape of the rear side of the leading vehicle reduces the drag coefficient of the following vehicle by washing the wake, similar to a spoiler at the rear. The rear side area of the leading vehicle forms a wide range of low pressures, which increases the drag coefficient effect of the following vehicle. The overall height of the leading vehicle also generates a distribution of low pressures above the rear of the vehicle. This reduces the impact of low pressures on the overall height of the following vehicle. The shape of the front of the following vehicle enables the wake of the leading vehicle, which involves low pressures, to inhibit the Bernoulli effect of the following vehicle. Furthermore, the front of the following vehicle continues to be affected by the wake of the leading vehicle, resulting in an increase in the drag coefficient reduction.

scholarly journals STUDY OF MESH REFINEMENT ON THE AERODYNAMIC COEFFICIENTS FOR NACA2412 PROFILE WITH DIFFERENT ANGLE OF ATTACK AND k - w TURBULENCE MODEL

2020 ◽  
Vol 5 (2) ◽  
Author(s):  
Nícolas Lima Oliveira ◽  
Eric Vargas Loureiro ◽  
Patrícia Habib Hallak
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Drag Coefficient ◽  
Turbulence Model ◽  
Lift Coefficient ◽  
Mesh Refinement ◽  
Angle Of Attack ◽  
Aerodynamic Coefficients ◽  
Computational Fluid Dynamics Cfd

This work presents the studies  obtained using OpenFOAM OpenSource Computational Fluid Dynamics (CFD) Software. Experiments were performed to predict lift coefficient and drag coefficient curves for the NACA2412 profile. Subsequently, the results obtained were compared with the results of the bibliography and discussed.

scholarly journals ANALISIS CFD KARAKTERISTIK AERODINAMIKA PADA SAYAP PESAWAT LSU-05 DENGAN PENAMBAHAN VORTEX GENERATOR (ANALYSIS OF CFD AERODYNAMIC CHARACTERISTICS AT THE WING OF AIRCRAFT LSU-05 WITH THE ADDITION OF VORTEX GENERATOR)

2017 ◽  
Vol 15 (1) ◽  
pp. 45
Author(s):  
Awalu Romadhon ◽  
Dana Herdiana
Keyword(s):  
Drag Coefficient ◽  
Cfd Simulation ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Vortex Generator ◽  
Aerodynamic Characteristics ◽  
Unmanned Aircraft ◽  
Vortex Generators ◽  
Aircraft Wing ◽  
Ansys Fluent

LSU-05 aircraft is one of the unmanned aerial vehicles (UAV), which is being developed by the Aeronautics Technology Center of LAPAN, whose mission is for research, observation, patrol, border surveillance, and investigation of natural disasters. This study aims to determine the effect of vortex generators on the aerodynamic characteristics of the LSU-05 Unmanned Aircraft wing. The method used is a numerical analysis with CFD simulation for predicting aerodynamic characteristics and flow phenomena that occur. The models used are the aircraft wing of the LSU-05 without vortex generator and with vortex generator designed with CATIA software. The simulation is using ANSYS Fluent software to determine changes in the aerodynamic characteristics of the wing after the addition of vortex generators such as the lift coefficient and drag coefficient. The results of the addition of vortex generator on LSU-05 wings are the increasing value of the maximum lift coefficient of the wing which becomes 1,34840 from 1,26450, it increases 0,0839 (6.63%) point, the increasing value of the drag coefficient on the angle of attack from -9⁰ to 11⁰, the decreasing value of the drag coefficient on the angle of attack 12⁰ up to 15⁰ and the increasing stall angle of wing from 11⁰ to 14⁰ or increased by 3⁰ (27,7%). AbstrakPesawat LSU-05 adalah salah satu pesawat tanpa awak (UAV) yang sedang dikembangkan oleh Pusat Teknologi Penerbangan LAPAN, yang mempunyai misi untuk kegiatan penelitian, observasi, patroli, pengawasan perbatasan wilayah, dan investigasi bencana alam. Penelitian ini bertujuan untuk mengetahui pengaruh penambahan vortex generator terhadap karakteristik aerodinamika dari sayap Pesawat Tanpa Awak LSU-05. Metode yang digunakan adalah analisis numerik dengan simulasi CFD untuk memprediksi karakteristik aerodinamika dan fenomena aliran yang terjadi. Model yang digunakan adalah sayap pesawat LSU-05 tanpa vortex generator dan dengan vortex generator yang didesain dengan software CATIA. Simulasi menggunakan software ANSYS Fluent untuk mengetahui perubahan karakteristik aerodinamika sayap setelah penambahan vortex generator seperti koefisien lift dan koefisien drag. Hasil yang diperoleh dari penelitian penambahan vortex generator pada sayap Pesawat LSU-05 adalah peningkatan nilai koefisien lift maksimum sayap dari 1,26450 menjadi 1,34840 atau naik sebesar 0,0839 (6,63%), peningkatan nilai koefisien drag pada sudut serang -9⁰ s/d 11⁰, penurunan nilai koefisien drag pada sudut serang 12⁰ s.d 15⁰ dan peningkatan sudut stall sayap dari 11⁰ menjadi 14⁰ atau naik sebesar 3⁰ (27,7 %).

Research Method of Aerodynamic Characteristics of Heavy Duty Truck in Crosswind

2014 ◽  
Vol 602-605 ◽  
pp. 689-692
Author(s):  
Zhe Zhang ◽  
Lin Lin Ren ◽  
Jie Li
Keyword(s):  
Numerical Simulation ◽  
Comparative Analysis ◽  
Research Method ◽  
Wind Tunnel Test ◽  
Simulation Method ◽  
Aerodynamic Characteristics ◽  
Heavy Duty ◽  
Aerodynamic Coefficients ◽  
Heavy Duty Truck ◽  
The Impact

The research program of crosswind aerodynamics was formulated with yaw model test of the relative motion principle for a domestic heavy duty truck. This approach was applied separately wind tunnel test and numerical simulation, to obtain six aerodynamic coefficients of the corresponding heavy duty truck model, and the numerical simulation method was proved to be true by comparative analysis. The conclusions of aerodynamic characteristics got from simulation could provide a useful reference to reduce the impact on crosswind handling stability and the fuel consumption of the heavy duty truck.

scholarly journals Effects of Trailing Edge Deflections Driven by Shape Memory Alloy Actuators on the Transonic Aerodynamic Characteristics of a Super Critical Airfoil

Actuators ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 160
Author(s):  
Binbin Lv ◽  
Yuanjing Wang ◽  
Pengxuan Lei
Keyword(s):  
Mach Number ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Smart Structure ◽  
Trailing Edge ◽  
Edge Based ◽  
Constant Deformation ◽  
Transonic Wind Tunnel

A smart structure to actuate a morphing trailing edge based on the super critical airfoil NASA sc-0714(2) was designed and verified in a transonic wind tunnel. The pressure distribution over the wing was measured to evaluate the structure ability and effects of trailing edge deflections on the aerodynamic characteristics. In the experiment, Mach number was from 0.4 to 0.8, and the angle of attack was from 0° to 6°. The results showed that the smart structure based on shape memory alloy could carry aerodynamic loads under transonic flow and deflect the trailing edge. When the driving force was constant, deformation would be influenced by the Mach number and angle of attack. Increasing the Mach number weakened the actuation capability of the smart structure, which decreased the deflection angle and rate of the trailing edge. The influence of the angle of attack is more complex, and couples with the influence of the Mach number. The higher the Mach number, the stronger the influence of the angles of attack. Additionally, the trailing edge deflection would dramatically change the flow structure over the airfoil, such as the shock wave position and strength. If separation was caused by the trailing edge deflection, the limitation of the smart structure would be further found.

Sign in / Sign up

Export Citation Format

Share Document