Cavity formation by the impact of Leidenfrost spheres

2012 ◽  
Vol 699 ◽  
pp. 465-488 ◽  
Author(s):  
J. O. Marston ◽  
I. U. Vakarelski ◽  
S. T. Thoroddsen

AbstractWe report observations of cavity formation and subsequent collapse when a heated sphere impacts onto a liquid pool. When the sphere temperature is much greater than the boiling point of the liquid, we observe an inverted Leidenfrost effect where the sphere is encompassed by a vapour layer that prevents physical contact with the liquid. This creates the ultimate non-wetting scenario during sphere penetration through a free surface, producing very smooth cavity walls. In some cases during initial entry, however, the liquid contacts the sphere at the equator, leading to the formation of a dual cavity structure. For cold sphere impacts, where a contact line is observed, we reveal details of the contact line pinning, which initially forms a sawtooth pattern. We also observe surface waves on the cavity interface for cold spheres. We compare our experimental results to previous studies of cavity dynamics and, in particular, the influence of hydrophobicity on the entry of the sphere.

2015 ◽  
Vol 783 ◽  
pp. 504-525 ◽  
Author(s):  
H. Ding ◽  
B.-Q. Chen ◽  
H.-R. Liu ◽  
C.-Y. Zhang ◽  
P. Gao ◽  
...  

We investigate the cavity formation during the impact of spheres and cylinders into a liquid pool by using a combination of experiments, simulations and theoretical analysis, with particular interest in contact-line pinning and its relation with the subsequent cavity evolution. The flows are simulated by a Navier–Stokes diffuse-interface solver that allows for moving contact lines. On the basis of agreement on experimentally measured quantities such as the position of the pinned contact line and the interface shape, we investigate flow details that are not accessible experimentally, identify the interface regions in the cavity formation and examine the geometric effects of impact objects. We connect wettability, inertia, geometry of the impact object, interface bending and contact-line position with the contact-line pinning by analysing the force balance at a pinned meniscus, and the result compares favourably with those from simulations and experiments. In addition to adjusting the interface bending, the object geometry also has a significant effect on the magnitude of low pressure in the liquid and the occurrence of flow separation. As a result, it is easier for an object with sharp edges to generate a cavity than a smooth object. A theoretical model based on the Rayleigh–Besant equation is developed to provide a quantitative description of the radial expansion of the cavity after the pinning of the contact line. The accuracy of the solution is greatly affected by the geometrical information on the interface connected to the pinned meniscus, showing the dependence of the global cavity dynamics on the local flows around the pinned contact line. Vertical ripple propagation on the cavity wall is found to follow the dispersion relation for the perturbation evolution on a hollow jet.


2019 ◽  
Vol 863 ◽  
pp. 757-788 ◽  
Author(s):  
Nayoung Kim ◽  
Hyungmin Park

In the present study, we experimentally investigate water surface deformation due to the impact of rounded cylindrical projectiles with different aspect ratios (1.0–8.0). The subsequent jet and splash formation is closely related to the dynamics of an underwater cavity. To control the cavity formation, two kinds of surface conditions (smooth and rough) are applied to the front parts of the projectiles, and two impact speeds are considered. The Froude, Reynolds and Weber numbers are in the ranges of 32–90, $5\times 10^{4}{-}8.4\times 10^{4}$ and 1700–5000, respectively. When the front is smooth, the water film rises up along the body surface immediately after impact, and the temporal variation of its height is analytically estimated. The film converges at the rear pole to create an apex jet at lower aspect ratios and simply rises up and falls with the body at higher aspect ratios. The jets could be further distinguished as thin and thick jets, whose breakdown is found to be a function of the viscous force and surface tension, i.e. the Ohnesorge number. On the other hand, when the front is rough, the water film cannot rise up along the body surface, and instead early separation occurs to make the splash above a free surface. The splash size is quantified to assess the effects of the aspect ratio and impact speed. Upon splash formation, a cavity is created under the free surface, which emanates from the nose of the projectile. As the body sinks, the cavity pinch-off occurs due to the imbalance between the hydrostatic pressure and air pressure inside the cavity. At higher aspect ratios, cavity pinch-off occurs on the side wall of the projectile and leaves a portion of the cavity bubble on it. When the surface is smooth, no underwater cavity forms. Finally, we compare the hydrodynamic force acting on the sinking bodies with and without cavity formation, based on the underwater trajectory of each projectile. It is found that the underwater cavity reduces the drag force on the sinking body when it fully encapsulates the body; however, if the air bubbles are partially attached to the body after pinch-off, they tend to detach irregularly or impose additional drag on the body.


2001 ◽  
Vol 440 ◽  
pp. 293-326 ◽  
Author(s):  
Y.-M. SCOLAN ◽  
A. A. KOROBKIN

The three-dimensional problem of blunt-body impact onto the free surface of an ideal incompressible liquid is considered within the Wagner theory. The theory is formally valid during an initial stage of the impact. The problem has been extensively studied in both two-dimensional and axisymmetric cases. However, there are no exact truly three-dimensional solutions of the problem even within the Wagner theory. At present, three-dimensional effects in impact problems are mainly handled approximately by using a sequence of two-dimensional solutions and/or aspect-ratio correction factor. In this paper we present exact analytical rather than approximate solutions to the three-dimensional Wagner problem. The solutions are obtained by the inverse method. In this method the body velocity and the projection on the horizontal plane of the contact line between the liquid free surface and the surface of the entering body are assumed to be given at any time instant. The shape of the impacting body is determined from the Wagner condition. It is proved that an elliptic paraboloid entering calm water at a constant velocity has an elliptic contact line with the free surface. Most of the results are presented for elliptic contact lines, for which analytical solutions of the inverse Wagner problem are available. The results obtained can be helpful in testing other numerical approaches and studying the influence of three-dimensional effects on the liquid flow and the hydrodynamic loads.


2017 ◽  
Vol 823 ◽  
pp. 716-754 ◽  
Author(s):  
M. M. Mansoor ◽  
I. U. Vakarelski ◽  
J. O. Marston ◽  
T. T. Truscott ◽  
S. T. Thoroddsen

We report results from an experimental study on the formation of stable–streamlined and helical cavity wakes following the free-surface impact of Leidenfrost spheres. Similar to the observations of Mansoor et al. (J. Fluid Mech., vol. 743, 2014, pp. 295–326), we show that acoustic ripples form along the interface of elongated cavities entrained in the presence of wall effects as soon as the primary cavity pinch-off takes place. The crests of these ripples can act as favourable points for closure, producing multiple acoustic pinch-offs, which are found to occur in an acoustic pinch-off cascade. We show that these ripples pacify with time in the absence of physical contact between the sphere and the liquid, leading to extremely smooth cavity wake profiles. More importantly, the downward-facing jet at the apex of the cavity is continually suppressed due to a skin-friction drag effect at the colliding cavity-wall junction, which ultimately produces a stable–streamlined cavity wake. This streamlined configuration is found to experience drag coefficients an order of a magnitude lower than those acting on room-temperature spheres. A striking observation is the formation of helical cavities which occur for impact Reynolds numbers $Re_{0}\gtrsim 1.4\times 10^{5}$ and are characterized by multiple interfacial ridges, stemming from and rotating synchronously about an evident contact line around the sphere equator. The contact line is shown to result from the degeneration of Kelvin–Helmholtz billows into turbulence which are observed forming along the liquid–vapour interface around the bottom hemisphere of the sphere. Using sphere trajectory measurements, we show that this helical cavity wake configuration has 40 %–55 % smaller force coefficients than those obtained in the formation of stable cavity wakes.


2020 ◽  
Vol 2020 (10) ◽  
pp. 4-11
Author(s):  
Victor Tikhomirov ◽  
Aleksandr Gorlenko ◽  
Stanislav Volohov ◽  
Mikhail Izmerov

The work purpose is the investigation of magnetic field impact upon properties of friction steel surfaces at fit stripping with tightness through manifested effects and their wear visually observed. On the spots of a real contact the magnetic field increases active centers, their amount and saturation with the time of dislocation outlet, and has an influence upon tribo-mating. The external electro-magnetic field promotes the increase of the number of active centers at the expense of dislocations outlet on the contact surface, and the increase of a physical contact area results in friction tie strengthening and growth of a friction factor. By the example of friction pairs of a spentonly unit in the suspension of coach cars there is given a substantiation of actuality and possibility for the creation of technical devices with the controlled factor of friction and the stability of effects achieved is also confirmed experimentally. Investigation methods: the fulfillment of laboratory physical experiments on the laboratory plant developed and patented on bush-rod samples inserted with the fit and tightness. The results of investigations and novelty: the impact of the magnetic field upon the value of a stripping force of a press fit with the guaranteed tightness is defined. Conclusion: there is a possibility to control a friction factor through the magnetic field impact upon a friction contact.


2020 ◽  
Vol 3 (2) ◽  
pp. 396-402
Author(s):  
Maria Florentina Rumba ◽  
Margaretha P.N Rozady ◽  
Theresia W. Mado

Abstrak: Kebiasaan manusia berubah karena adanya wabah COVID-19, hal ini berpengaruh ketika manusia masuk ke dalam fase new normal. New normal diartikan sebagai keadaan yang tidak biasa dilakukan sebelumnya, yang kemudian dijadikan sebagai standar atau kebiasaan baru yang mesti dilakukan manusia untuk dirinya sendiri maupun untuk bersosialisasi dengan orang lain. Kebiasaan baru ini pun menimbulkan pro dan kontra seiring dengan dampak yang timbul. Lembaga pendidikan tinggi merupakan salah satu yang merasakan dampak penerapan new normal. Perkuliahan yang selama ini dilakukan secara online/daring, akan kembali dilakukan secara luring/tatap muka, dengan tetap menerapkan protokol COVID-19 seperti mengenakan masker, menjaga jarak, mengenakan sarung tangan, serta tidak melakukan kontak fisik seperti berjabat tangan. Masalah yang muncul bukan hanya kecemasan orang tua terhadap anak – anaknya, tetapi bagaimana lembaga pendidikan tinggi mengatur segala sumber daya yang dimiliki agar memenuhi standar penerapan new normal. penelitian ini bertujuan untuk mengetahui penerimaan  terhadap kondisi normal yang baru menggunakan Perspektif balance score card. Abstract: Human habits change because of the COVID-19 outbreak, this affects when humans enter the new normal phase. New normal is defined as a condition that is not normally done before, which is then used as a standard or new habits that must be done by humans for themselves or to socialize with others. This new habit also raises the pros and cons along with the impact arising with the new normal. Higher education institutions are the ones who feel the impact of implementing new normal. Lectures that have been conducted online / online will be re-done offline / face to face, while still applying the COVID-19 protocol such as wearing a mask, keeping a distance, wearing gloves, and not making physical contact such as shaking hands. The problem that arises is not only parents' anxiety about their children, but how higher education institutions regulate all available resources to meet new normal implementation standards. This study aims to determine acceptance of new normal conditions using the balance score card Perspective.


2021 ◽  
pp. 003022282110291
Author(s):  
Jennifer K. Penberthy ◽  
Marieta Pehlivanova ◽  
Tevfik Kalelioglu ◽  
Chris A. Roe ◽  
Callum E. Cooper ◽  
...  

After death communications(ADCs) are defined as perceived spontaneous contacts with living individuals by the deceased. This research presents on a subset of data from a recent large international survey of individuals who experienced ADCs and provided systematic information regarding these experiences. In our research we explore the impact of having an ADC on reported spirituality, religiosity, beliefs and attitudes about death and dying and also explore the moderating factors of this impact. We found that having an ADC was perceived as a positive life experience and that it was associated with a reduction in fear of death, belief in life after death and that the deceased could communicate with the living, and increased reported spirituality. Moderating factors include aspects of having or desiring physical contact with the deceased as well as perceiving some emotional reaction to the ADCs. Future directions for research exploration are also provided based on our findings.


Nutrients ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 1168
Author(s):  
Cristian Neira ◽  
Rejane Godinho ◽  
Fabio Rincón ◽  
Rodrigo Mardones ◽  
Janari Pedroso

Confinement at home, quarantine, and social distancing are some measures adopted worldwide to prevent the spread of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-Cov-2), which has been generating an important alteration in the routines and qualities of life of people. The impact on health is still being evaluated, and consequences in the nutritional field are not entirely clear. The study objective was to evaluate the current evidence about the impact that preventive measures of physical contact restriction causes in healthy nutrition. A systematic review was carried out according to the “Preferred Reporting Items for Systematic Reviews and Meta-Analyses” PRISMA Group and Cochrane method for rapid systematic reviews. Searching was performed in six electronic databases and evaluated articles published between 2010 and 2020, including among their participants adult subjects who had been exposed to the preventive measures of physical contact restriction. Seven studies met the selection criteria and reported an overall increase in food consumption, weight, Body Mass Index (BMI), and a change in eating style. Findings suggest that healthy nutrition is affected by preventive measures to restrict physical contact as a result of the COVID-19 syndemic.


2012 ◽  
Vol 10 (H16) ◽  
pp. 478-479
Author(s):  
Patrick Michel ◽  

AbstractNEOShield is a European-Union funded project coordinated by the German Aero-space Center, DLR, to address near-Earth object (NEO) impact hazard mitigation issues. The NEOShield consortium consists of 13 research institutes, universities, and industrial partners from 6 countries and includes leading US and Russian space organizations. The project is funded for a period of 3.5 years from January 2012 with a total of 5.8 million euros. The primary aim of the project is to investigate in detail promising mitigation techniques, such as the kinetic impactor, blast deflection, and the gravity tractor, and devise feasible demonstration missions. Options for an international strategy for implementation when an actual impact threat arises will also be investigated.The NEOShield work plan consists of scientific investigations into the nature of the impact hazard and the physical properties of NEOs, and technical and engineering studies of practical means of deflecting NEOs. There exist many ideas for asteroid deflection techniques, many of which would require considerable scientific and technological development. The emphasis of NEOShield is on techniques that are feasible with current technology, requiring a minimum of research and development work. NEOShield aims to provide detailed designs of feasible mitigation demonstration missions, targeting NEOs of the kind most likely to trigger the first space-based mitigation action.Most of the asteroid deflection techniques proposed to date require physical contact with the threatening object, an example being the kinetic impactor. NEOShield includes research into the mitigation-relevant physical properties of NEOs on the basis of remotely-sensed astronomical data and the results of rendezvous missions, the observational techniques required to efficiently gather mitigation-relevant data on the dynamical state and physical properties of a threatening NEO, and laboratory investigations using gas guns to fire projectiles into asteroid regolith analog materials. The gas-gun investigations enable state-of-the-art numerical models to be verified at small scales. Computer simulations at realistic NEO scales are used to investigate how NEOs with a range of properties would respond to a pulse of energy applied in a deflection attempt. The technical work includes the development of crucial technologies, such as the autonomous guidance of a kinetic impactor to a precise point on the surface of the target, and the detailed design of realistic missions for the purpose of demonstrating the applicability and feasibility of one or more of the techniques investigated. Theoretical work on the blast deflection method of mitigation is designed to probe the circumstances in which this last line of defense may be the only viable option and the issues relating to its deployment. A global response campaign roadmap will be developed based on realistic scenarios presented, for example, by the discovery of an object such as 99942 Apophis or 2011 AG5 on a threatening orbit. The work will include considerations of the timeline of orbit knowledge and impact probability development, reconnaissance observations and fly-by or rendezvous missions, the political decision to mount a mitigation attempt, and the design, development, and launch of the mitigation mission. Collaboration with colleagues outside the NEOShield Consortium involved in complementary activities (e.g. under the auspices of the UN, NASA, or ESA) is being sought in order to establish a broad international strategy.We present a brief overview of the history and planned scope of the project, and progress made to date.The NEOShield project (http://www.neoshield.net) has received funding from the European Union Seventh Framework Program (FP7/2007-2013) under Grant Agreement no. 282703.


Author(s):  
Hans Bihs ◽  
Mayilvahanan Alagan Chella ◽  
Arun Kamath ◽  
Øivind Asgeir Arntsen

For the stability of offshore structures, such as offshore wind foundations, extreme wave conditions need to be taken into account. Waves from extreme events are critical from the design perspective. In a numerical wave tank, extreme waves can be modeled using focused waves. Here, linear waves are generated from a wave spectrum. The wave crests of the generated waves coincide at a preselected location and time. Focused wave generation is implemented in the numerical wave tank module of REEF3D, which has been extensively and successfully tested for various wave hydrodynamics and wave–structure interaction problems in particular and for free surface flows in general. The open-source computational fluid dynamics (CFD) code REEF3D solves the three-dimensional Navier–Stokes equations on a staggered Cartesian grid. Higher order numerical schemes are used for time and spatial discretization. For the interface capturing, the level set method is selected. In order to test the generated waves, the time series of the free surface elevation are compared with experimental benchmark cases. The numerically simulated free surface elevation shows good agreement with experimental data. In further computations, the impact of the focused waves on a vertical circular cylinder is investigated. A breaking focused wave is simulated and the associated kinematics is investigated. Free surface flow features during the interaction of nonbreaking focused waves with a cylinder and during the breaking process of a focused wave are also investigated along with the numerically captured free surface.


Sign in / Sign up

Export Citation Format

Share Document