scholarly journals Water entry of deformable spheres

2017 ◽  
Vol 824 ◽  
pp. 912-930 ◽  
Author(s):  
Randy C. Hurd ◽  
Jesse Belden ◽  
Michael A. Jandron ◽  
D. Tate Fanning ◽  
Allan F. Bower ◽  
...  
Keyword(s):  
Material Properties ◽  
High Speed ◽  
Large Scale ◽  
Hydrodynamic Pressure ◽  
Oscillation Period ◽  
Water Entry ◽  
Effective Diameter ◽  
High Speed Imaging ◽  
Rigid Spheres ◽  
Velocity Change

When a rigid body collides with a liquid surface with sufficient velocity, it creates a splash curtain above the surface and entrains air behind the sphere, creating a cavity below the surface. While cavity dynamics has been studied for over a century, this work focuses on the water entry characteristics of deformable elastomeric spheres, which has not been studied. Upon free surface impact, an elastomeric sphere deforms significantly, giving rise to large-scale material oscillations within the sphere resulting in unique nested cavities. We study these phenomena experimentally with high-speed imaging and image processing techniques. The water entry behaviour of deformable spheres differs from rigid spheres because of the pronounced deformation caused at impact as well as the subsequent material vibration. Our results show that this deformation and vibration can be predicted from material properties and impact conditions. Additionally, by accounting for the sphere deformation in an effective diameter term, we recover previously reported characteristics for time to cavity pinch off and hydrodynamic force coefficients for rigid spheres. Our results also show that velocity change over the first oscillation period scales with the dimensionless ratio of material shear modulus to impact hydrodynamic pressure. Therefore, we are able to describe the water entry characteristics of deformable spheres in terms of material properties and impact conditions.

Large-scale drop test on perlite–metal syntactic foam

2018 ◽  
Vol 53 (4) ◽  
pp. 515-520 ◽  
Author(s):  
T Fiedler ◽  
M Taherishargh
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Low Cost ◽  
Syntactic Foam ◽  
Drop Test ◽  
Passenger Vehicle ◽  
High Speed Imaging ◽  
Cellular Metal ◽  
Energy Absorbing ◽  
Impact Mass

Perlite–metal syntactic foam is a low-cost cellular metal intended for use in automotive impact protection. To test the viability of the material a 2.5 ton drop test was conducted. Impact mass and energy were selected to replicate the conditions of a frontal impact between a large passenger vehicle and a crash cushion. A hollow syntactic foam cylinder was manufactured to decelerate the drop weight in a controlled manner. Accelerometers and high-speed imaging were utilized to evaluate the performance of the energy absorbing element.

Visualizations of Flow Structures in the Rotor Passage of an Axial Compressor at the Onset of Stall

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Huang Chen ◽  
Yuanchao Li ◽  
David Tan ◽  
Joseph Katz
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Incidence Angle ◽  
Axial Compressor ◽  
Leading Edge ◽  
Suction Side ◽  
Stereoscopic Particle Image Velocimetry ◽  
High Speed Imaging ◽  
Vortical Structures ◽  
Flow Phenomena

Experiments preformed in the JHU refractive index matched facility examine flow phenomena developing in the rotor passage of an axial compressor at the onset of stall. High-speed imaging of cavitation performed at low pressures qualitatively visualizes vortical structures. Stereoscopic particle image velocimetry (SPIV) measurements provide detailed snapshots and ensemble statistics of the flow in a series of meridional planes. At prestall condition, the tip leakage vortex (TLV) breaks up into widely distributed intermittent vortical structures shortly after rollup. The most prominent instability involves periodic formation of large-scale backflow vortices (BFVs) that extend diagonally upstream, from the suction side (SS) of one blade at midchord to the pressure side (PS) near the leading edge of the next blade. The 3D vorticity distributions obtained from data recorded in closely spaced planes show that the BFVs originate form at the transition between the high circumferential velocity region below the TLV center and the main passage flow radially inward from it. When the BFVs penetrate to the next passage across the tip gap or by circumventing the leading edge, they trigger a similar phenomenon there, sustaining the process. Further reduction in flow rate into the stall range increases the number and size of the backflow vortices, and they regularly propagate upstream of the leading edge of the next blade, where they increase the incidence angle in the tip corner. As this process proliferates circumferentially, the BFVs rotate with the blades, indicating that there is very little through flow across the tip region.

scholarly journals Unsteady forces on spheres during free-surface water entry

2012 ◽  
Vol 704 ◽  
pp. 173-210 ◽  
Author(s):  
Tadd T. Truscott ◽  
Brenden P. Epps ◽  
Alexandra H. Techet
Keyword(s):  
Free Surface ◽  
Surface Water ◽  
High Speed ◽  
Accurate Determination ◽  
Water Entry ◽  
High Speed Imaging ◽  
Air Cavity ◽  
Unsteady Forces ◽  
Unsteady Force ◽  
Low Mass

AbstractWe present a study of the forces during free-surface water entry of spheres of varying masses, diameters, and surface treatments. Previous studies have shown that the formation of a subsurface air cavity by a falling sphere is conditional upon impact speed and surface treatment. This study focuses on the forces experienced by the sphere in both cavity-forming and non-cavity-forming cases. Unsteady force estimates require accurate determination of the deceleration for both high and low mass ratios, especially as inertial and hydrodynamic effects approach equality. Using high-speed imaging, high-speed particle image velocimetry, and numerical simulation, we examine the nature of the forces in each case. The effect of mass ratio is shown, where a lighter sphere undergoes larger decelerations and more dramatic trajectory changes. In the non-cavity-forming cases, the forces are modulated by the growth and shedding of a strong, ring-like vortex structure. In the cavity-forming cases, little vorticity is shed by the sphere, and the forces are modulated by the unsteady pressure required for the opening and closing of the air cavity. A data-driven boundary-element-type method is developed to accurately describe the unsteady forces using cavity shape data from experiments.

The water entry of a sphere in a jet

2019 ◽  
Vol 863 ◽  
pp. 956-968 ◽  
Author(s):  
Nathan B. Speirs ◽  
Jesse Belden ◽  
Zhao Pan ◽  
Sean Holekamp ◽  
George Badlissi ◽  
...  
Keyword(s):  
Structural Damage ◽  
High Speed ◽  
Early Time ◽  
Water Entry ◽  
Rigid Sphere ◽  
High Speed Imaging ◽  
Near Surface ◽  
Image Velocimetry ◽  
Surface Particle ◽  
Force Reduction

The forces on an object impacting the water are extreme in the early moments of water entry and can cause structural damage to biological and man-made bodies alike. These early-time forces arise largely from added mass, peaking when the submergence is much less than one body length. We experimentally investigate a means of reducing impact forces on a rigid sphere by placing the sphere inside a jet of water so that the jet strikes the quiescent water surface prior to entry of the sphere into the pool. The water jet accelerates the pool liquid and forms a cavity into which a sphere falls. Through on-board accelerometer measurements and high-speed imaging, we quantify the force reduction compared to the case of a sphere entering a quiescent pool. Finally, we find the emergence of a critical jet volume required to maximize force reduction; the critical volume is rationalized using scaling arguments informed by near-surface particle image velocimetry (PIV) data.

scholarly journals On the Ejection of Filaments of Polymer Solutions Triggered by a Micrometer-Scale Mixing Mechanism

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3399
Author(s):  
Fernando Marín-Brenes ◽  
Jesús Olmedo-Pradas ◽  
Alfonso M. Gañán-Calvo ◽  
Luis Modesto-López
Keyword(s):  
Flow Rate ◽  
Liquid Flow ◽  
High Speed ◽  
Large Scale ◽  
Liquid Flow Rate ◽  
Scaling Law ◽  
Feeding Tube ◽  
Scale Production ◽  
High Speed Imaging ◽  
Poly Ethylene

Polymer filaments constitute precursor materials of so-called fiber mats, ubiquitous structures across cutting-edge technological fields. Thus, approaches that contribute to large-scale production of fibers are desired from an industrial perspective. Here, we use a robust liquid atomization device operated at relatively high flow rates, ~20 mL/min, as facilitating technology for production of multiple polymer filaments. The method relies on a turbulent, energetically efficient micro-mixing mechanism taking place in the interior of the device. The micro-mixing is triggered by radial implosion of a gas current into a liquid feeding tube, thus resulting in breakup of the liquid surface. We used poly(ethylene oxide) solutions of varying concentrations as test liquids to study their fragmentation and ejection dynamics employing ultra-high speed imaging equipment. Taking an energy cascade approach, a scaling law for filament diameter was proposed based on gas pressure, liquid flow rate and viscosity. We find that a filament dimensionless diameter, Df*, scales as a non-dimensional liquid flow rate Q* to the 1/5. The study aims to elucidate the underlying physics of liquid ejection for further applications in material production.

scholarly journals Wavelet analysis techniques in cavitating flows

2018 ◽  
Vol 376 (2126) ◽  
pp. 20170242 ◽  
Author(s):  
Paul A. Brandner ◽  
James A. Venning ◽  
Bryce W. Pearce
Keyword(s):  
Wavelet Transform ◽  
Continuous Wavelet Transform ◽  
High Speed ◽  
Large Scale ◽  
Bubble Dynamics ◽  
Measurement Techniques ◽  
Continuous Wavelet ◽  
High Speed Imaging ◽  
Two Phase ◽  
Ultrasonic Sensing

Cavitating and bubbly flows involve a host of physical phenomena and processes ranging from nucleation, surface and interfacial effects, mass transfer via diffusion and phase change to macroscopic flow physics involving bubble dynamics, turbulent flow interactions and two-phase compressible effects. The complex physics that result from these phenomena and their interactions make for flows that are difficult to investigate and analyse. From an experimental perspective, evolving sensing technology and data processing provide opportunities for gaining new insight and understanding of these complex flows, and the continuous wavelet transform (CWT) is a powerful tool to aid in their elucidation. Five case studies are presented involving many of these phenomena in which the CWT was key to data analysis and interpretation. A diverse set of experiments are presented involving a range of physical and temporal scales and experimental techniques. Bubble turbulent break-up is investigated using hydroacoustics, bubble dynamics and high-speed imaging; microbubbles are sized using light scattering and ultrasonic sensing, and large-scale coherent shedding driven by various mechanisms are analysed using simultaneous high-speed imaging and physical measurement techniques. The experimental set-up, aspect of cavitation being addressed, how the wavelets were applied, their advantages over other techniques and key findings are presented for each case study. This paper is part of the theme issue ‘Redundancy rules: the continuous wavelet transform comes of age’.

Experimental Investigation of Tip Cavitating Vortices in Axial-Flow Pump

2017 ◽  
Author(s):  
Desheng Zhang
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Axial Flow ◽  
Operating Conditions ◽  
High Speed Imaging ◽  
Cavitation Performance ◽  
Stable Operating ◽  
Wide Range ◽  
Axial Flow Pump ◽  
Flow Pump

The primary goal of this work focuses on the cavitating vortices in the tip region of an axial-flow pump with 3 and 4 blades mainly based on the high-speed imaging experiments, with special attention on the trajectory and dynamics of a large-scale cavitation structure. The hydraulic and cavitation performance between two impellers were compared, and it can be found that the model with 4 blades has a relative wide range of stable operating conditions as well as the better anti-cavitation ability. By the analysis of the cavitation curves, it confirms that the highly unsteady tip cavitation cloud near the blade trailing edge should be responsible for the severe degradation of the performance. According to the detailed study on the cavitation evolution in the two impellers, it is observed that the trajectory of tip cavitating vortices for different flow rates seems very similar determined by the operating conditions. However, the dynamics varies significantly, which is associated with the blade loading and flow passage width.

Optical investigations of nozzle geometrical and dynamic factors on formation and development characteristics of string cavitation with large-scale diesel tapered-hole nozzles

2020 ◽  
pp. 146808742096933
Author(s):  
Wei Guan ◽  
Zhixia He ◽  
Lian Duan ◽  
Tianyi Cao ◽  
Shenxing Sun ◽  
...  
Keyword(s):  
High Speed ◽  
Large Scale ◽  
Physical Phenomenon ◽  
Distribution Characteristics ◽  
High Speed Imaging ◽  
Cavitation Inception ◽  
Dynamic Factors ◽  
Structure Changes ◽  
Primary Breakup ◽  
Tapered Hole

Cavitation is known to be an essential physical phenomenon to induce the fuel primary breakup process, which further influences subsequent secondary atomization and combustion in diesel engines. Different from normal geometry-induced cavitation, the special vortex-induced cavitation, which may influence strongly spray characteristics, is seldom investigated comparatively. In this paper, formations and developments of string cavitation are captured in scaled-up transparent replicas of diesel tapered-hole nozzles by high-speed imaging technology. The ensemble average images were post-processed by MATLAB code for characterizing the string cavitation at fixed needle lifts. The results indicate that string cavitation tends to occur initially in the middle of the nozzle holes. Besides, shedding bubbles from geometry-induced cavitation may stimulate the string cavitation inception as an inducing factor. The morphology and duration of both two types of string cavitation are largely influenced by needle lifts and cavitation number. Moreover, it is concluded that string cavitation hardly occurs in nozzles with low hole entrance location, and the hole entrance rounding structure changes the distribution characteristics of string cavitation. Finally, it is ascertained that the variation of magnification ratio changes little or nothing about development and distribution characteristics of string cavitation.

scholarly journals Real-time on-machine observations close to interelectrode gap in a tool-based hybrid laser-electrochemical micromachining process

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Krishna Kumar Saxena ◽  
Xiaolei Chen ◽  
Maria Rosaria Vetrano ◽  
Jun Qian ◽  
Dominiek Reynaerts
Keyword(s):  
Real Time ◽  
High Speed ◽  
Large Scale ◽  
Electrochemical Micromachining ◽  
Experimental Investigations ◽  
Multimode Waveguide ◽  
High Speed Imaging ◽  
Bubble Generation ◽  
Loop Control ◽  
Underlying Mechanisms

Abstract A tool-based hybrid laser-electrochemical micromachining process involves concurrent application of two process energies i.e. electrochemical and laser in the same machining zone by means of a hybrid tool which serves as an ECM tool as well as a multimode waveguide. It is a relatively novel process finding applications in defect-free machining of difficult-to-cut materials without affecting their microstructure. In order to understand the physical phenomena occurring during this process, in-situ observations are required. Therefore, in this work, a real time observation was carried out of a novel tool-based hybrid laser electrochemical micromachining process. A combination of high-speed imaging and Large Scale Particle Image Velocimetry (LSPIV) was used to visualize the tool-based hybrid laser-ECM process in real time. It also allowed to carry out experimental investigations on the by-products and bubble generation which have a direct effect on process performance in terms of accuracy and efficiency. The real-time on-machine observations are unique of its kind and they will facilitate the understanding of underlying mechanisms governing this hybrid laser-electrochemical micromachining process. This will ultimately help in improving the quality of parts manufactured. This research is also a step forward towards making these physics-based hybrid processes deterministic by employing high-speed imaging in a closed loop control.

Sign in / Sign up

Export Citation Format

Share Document