A New “Number” for Aircraft with Power-Augmented Circulation

1965 ◽  
Vol 69 (650) ◽  
pp. 137-137
Author(s):  
C. F. Toms
Keyword(s):  
Reynolds Number ◽  
Mach Number ◽  
Dimensional Analysis ◽  
Relative Motion ◽  
The Body ◽  
Several Variables ◽  
Function Of Several Variables

The Familiar process of dimensional analysis for aerodynamics equates a force to a function of several variables liable to affect it, in terms of the dimensions M, L, T, and yields the numbers known as the Reynolds number and the Mach number of the flow. These numbers are generally regarded as useful and sufficient means of denoting the regimes of flow in conventional circumstances, where the force developed on a body results solely from the relative motion between the body and a mass of fluid.

Simulation of Fluttering and Autorotation Motion of Vertically Hinged Flat Plate

2015 ◽  
Author(s):  
Ali Bakhshandeh Rostami ◽  
Antonio Carlos Fernandes
Keyword(s):  
Reynolds Number ◽  
Flat Plate ◽  
Dimensional Analysis ◽  
Time Domain ◽  
Rotational Motion ◽  
Small Amplitude ◽  
Transition Point ◽  
Vertical Axis ◽  
The Body ◽  
Rotating Plate

This paper is dedicated to the simulation of fluttering (oscillatory) and tumbling (rotational) phenomenon that may occur during the flow induced rotation in the water or air current. Fluttering is the oscillation of body about an axis and the tumbling, better called here as autorotation, is a name given to the case when the body turns continuously around the axis. This work describes the simulation of these phenomena by a nonlinear time domain code on freely rotating plate about a fixed vertical axis. The dimensional analysis proves that the rotational motion induced by flow is governed essentially by the dimensionless moment of inertia (I*) and Reynolds number. For Reynolds number less than 15000, plate experiences small amplitude fluttering motion that is independent of I*. It is shown that by increasing I* the fluttering bifurcates to autorotation, with a transition point that is approximately independent of Reynolds number and is such that I*=0.083.

scholarly journals Movement of a finite body in channel flow

2016 ◽  
Vol 472 (2191) ◽  
pp. 20160164 ◽  
Author(s):  
Frank T. Smith ◽  
Edward R. Johnson
Keyword(s):  
Reynolds Number ◽  
Channel Flow ◽  
Flow Instability ◽  
Flow Direction ◽  
Finite Size ◽  
The Body ◽  
Thin Body ◽  
Shear Stresses ◽  
Unsteady Interaction ◽  
High Reynolds

A body of finite size is moving freely inside, and interacting with, a channel flow. The description of this unsteady interaction for a comparatively dense thin body moving slowly relative to flow at medium-to-high Reynolds number shows that an inviscid core problem with vorticity determines much, but not all, of the dominant response. It is found that the lift induced on a body of length comparable to the channel width leads to differences in flow direction upstream and downstream on the body scale which are smoothed out axially over a longer viscous length scale; the latter directly affects the change in flow directions. The change is such that in any symmetric incident flow the ratio of slopes is found to be cos ⁡ ( π / 7 ) , i.e. approximately 0.900969, independently of Reynolds number, wall shear stresses and velocity profile. The two axial scales determine the evolution of the body and the flow, always yielding instability. This unusual evolution and linear or nonlinear instability mechanism arise outside the conventional range of flow instability and are influenced substantially by the lateral positioning, length and axial velocity of the body.

scholarly journals Simulation of Gas Flow Over a Micro Cylinder

2009 ◽  
Author(s):  
Yuan Hu ◽  
Quanhua Sun ◽  
Jing Fan
Keyword(s):  
Reynolds Number ◽  
Mach Number ◽  
Drag Coefficient ◽  
Gas Flow ◽  
Rarefied Gas ◽  
Low Reynolds Number ◽  
Pressure Drag ◽  
Low Reynolds ◽  
Rarefied Gas Effect ◽  
Gas Effect

Gas flow over a micro cylinder is simulated using both a compressible Navier-Stokes solver and a hybrid continuum/particle approach. The micro cylinder flow has low Reynolds number because of the small length scale and the low speed, which also indicates that the rarefied gas effect exists in the flow. A cylinder having a diameter of 20 microns is simulated under several flow conditions where the Reynolds number ranges from 2 to 50 and the Mach number varies from 0.1 to 0.8. It is found that the low Reynolds number flow can be compressible even when the Mach number is less than 0.3, and the drag coefficient of the cylinder increases when the Reynolds number decreases. The compressible effect will increase the pressure drag coefficient although the friction coefficient remains nearly unchanged. The rarefied gas effect will reduce both the friction and pressure drag coefficients, and the vortex in the flow may be shrunk or even disappear.

The Effect of Pulsed Blowing on the Boundary Layer of a Highly Loaded Low Pressure Turbine Blade

2013 ◽  
Author(s):  
Marion Mack ◽  
Roland Brachmanski ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Mach Number ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Low Pressure ◽  
Trailing Edge ◽  
Low Pressure Turbine ◽  
Wide Range ◽  
Highly Loaded

The performance of the low pressure turbine (LPT) can vary appreciably, because this component operates under a wide range of Reynolds numbers. At higher Reynolds numbers, mid and aft loaded profiles have the advantage that transition of suction side boundary layer happens further downstream than at front loaded profiles, resulting in lower profile loss. At lower Reynolds numbers, aft loading of the blade can mean that if a suction side separation exists, it may remain open up to the trailing edge. This is especially the case when blade lift is increased via increased pitch to chord ratio. There is a trend in research towards exploring the effect of coupling boundary layer control with highly loaded turbine blades, in order to maximize performance over the full relevant Reynolds number range. In an earlier work, pulsed blowing with fluidic oscillators was shown to be effective in reducing the extent of the separated flow region and to significantly decrease the profile losses caused by separation over a wide range of Reynolds numbers. These experiments were carried out in the High-Speed Cascade Wind Tunnel of the German Federal Armed Forces University Munich, Germany, which allows to capture the effects of pulsed blowing at engine relevant conditions. The assumed control mechanism was the triggering of boundary layer transition by excitation of the Tollmien-Schlichting waves. The current work aims to gain further insight into the effects of pulsed blowing. It investigates the effect of a highly efficient configuration of pulsed blowing at a frequency of 9.5 kHz on the boundary layer at a Reynolds number of 70000 and exit Mach number of 0.6. The boundary layer profiles were measured at five positions between peak Mach number and the trailing edge with hot wire anemometry and pneumatic probes. Experiments were conducted with and without actuation under steady as well as periodically unsteady inflow conditions. The results show the development of the boundary layer and its interaction with incoming wakes. It is shown that pulsed blowing accelerates transition over the separation bubble and drastically reduces the boundary layer thickness.

Investigation of the 3D Unsteady Rotor Pressure Field in a HP Turbine Stage

2002 ◽  
Author(s):  
E. Valenti ◽  
J. Halama ◽  
R. De´nos ◽  
T. Arts
Keyword(s):  
Reynolds Number ◽  
Mach Number ◽  
Pressure Field ◽  
Pressure Ratio ◽  
Turbine Stage ◽  
Time Resolved ◽  
Mach Number Distribution ◽  
Rotor Surface ◽  
Exit Mach Number ◽  
Unsteady Pressure Measurements

This paper presents steady and unsteady pressure measurements at three span locations (15, 50 and 85%) on the rotor surface of a transonic turbine stage. The data are compared with the results of a 3D unsteady Euler stage calculation. The overall agreement between the measurements and the prediction is satisfactory. The effects of pressure ratio and Reynolds number are discussed. The rotor time-averaged Mach number distribution is very sensitive to the pressure ratio of the stage since the incidence of the flow changes as well as the rotor exit Mach number. The time-resolved pressure field is dominated by the vane trailing edge shock waves. The incidence and intensity of the shock strongly varies from hub to tip due to the radial equilibrium of the flow at the vane exit. The decrease of the pressure ratio attenuates significantly the amplitude of the fluctuations. An increase of the pressure ratio has less significant effect since the change in the vane exit Mach number is small. The effect of the Reynolds number is weak for both the time-averaged and the time-resolved rotor static pressure at mid-span, while it causes an increase of the pressure amplitudes at the two other spans.

scholarly journals Experimental Investigation of Tandem Blade Cascades With Double-Circular ARC Profiles

1985 ◽  
Author(s):  
Wu Guochuan ◽  
Zhuang Biaonan ◽  
Guo Bingheng
Keyword(s):  
Experimental Investigation ◽  
Reynolds Number ◽  
Mach Number ◽  
Total Pressure ◽  
Incidence Angle ◽  
Axial Direction ◽  
Geometrical Parameters ◽  
Optimal Conditions ◽  
Turning Angle ◽  
Circular Arc

24 double circular are tandem blade cascades of three different chord-ratios were investigated under different displacements in peripheral and axial direction. The inlet Mach number was 0.3. The Reynolds number based on blade chord was 2.7×105. The characteristics of the tandem blade cascades, such as the dependence of turning angle and coefficient of total pressure loss on incidence angle were obtained. The ranges of main geometrical parameters under optimal conditions were recommended.

Rotating elliptic cylinders in a viscous fluid at rest or in a parallel stream

1977 ◽  
Vol 79 (1) ◽  
pp. 127-156 ◽  
Author(s):  
Hans J. Lugt ◽  
Samuel Ohring
Keyword(s):  
Reynolds Number ◽  
Fluid Flow ◽  
Numerical Solutions ◽  
Elliptic Cylinder ◽  
The Body ◽  
Oscillatory Behaviour ◽  
Incompressible Fluid Flow ◽  
Transient Period ◽  
Parallel Stream ◽  
Rotating Bodies

Numerical solutions are presented for laminar incompressible fluid flow past a rotating thin elliptic cylinder either in a medium at rest at infinity or in a parallel stream. The transient period from the abrupt start of the body to some later time (at which the flow may be steady or periodic) is studied by means of streamlines and equi-vorticity lines and by means of drag, lift and moment coefficients. For purely rotating cylinders oscillatory behaviour from a certain Reynolds number on is observed and explained. Rotating bodies in a parallel stream are studied for two cases: (i) when the vortex developing at the retreating edge of the thin ellipse is in front of the edge and (ii) when it is behind the edge.

Effect of Compressibility on Gaseous Flows in a Micro-Tube

2003 ◽  
Author(s):  
Yutaka Asako ◽  
Kenji Nakayama
Keyword(s):  
Reynolds Number ◽  
Mach Number ◽  
Pressure Distribution ◽  
Flow Characteristics ◽  
Fused Silica ◽  
Two Dimensional ◽  
Arbitrary Lagrangian Eulerian ◽  
Gaseous Flow ◽  
Gaseous Flows ◽  
Energy Equations

The product of friction factor and Reynolds number (f·Re) of gaseous flow in the quasi-fully developed region of a micro-tube was obtained experimentally and numerically. The tube cutting method was adopted to obtain the pressure distribution along the tube. The fused silica tubes whose nominal diameters were 100 and 150 μm, were used. Two-dimensional compressible momentum and energy equations were solved to obtain the flow characteristics in micro-tubes. The numerical methodology is based on the Arbitrary-Lagrangian-Eulerian (ALE) method. The both results agree well and it was found that (f·Re) is a function of Mach number.

On the unsteady inviscid force on cylinders and spheres in subcritical compressible flow

2008 ◽  
Vol 366 (1873) ◽  
pp. 2161-2175 ◽  
Author(s):  
M Parmar ◽  
A Haselbacher ◽  
S Balachandar
Keyword(s):  
Mach Number ◽  
Compressible Flow ◽  
Propagation Speed ◽  
Added Mass ◽  
The Body ◽  
Mass Force ◽  
Unsteady Force ◽  
Mass Coefficient ◽  
Added Mass Coefficient ◽  
Cylinders And Spheres

The unsteady inviscid force on cylinders and spheres in subcritical compressible flow is investigated. In the limit of incompressible flow, the unsteady inviscid force on a cylinder or sphere is the so-called added-mass force that is proportional to the product of the mass displaced by the body and the instantaneous acceleration. In compressible flow, the finite acoustic propagation speed means that the unsteady inviscid force arising from an instantaneously applied constant acceleration develops gradually and reaches steady values only for non-dimensional times c ∞ t / R ≳10, where c ∞ is the freestream speed of sound and R is the radius of the cylinder or sphere. In this limit, an effective added-mass coefficient may be defined. The main conclusion of our study is that the freestream Mach number has a pronounced effect on both the peak value of the unsteady force and the effective added-mass coefficient. At a freestream Mach number of 0.5, the effective added-mass coefficient is about twice as large as the incompressible value for the sphere. Coupled with an impulsive acceleration, the unsteady inviscid force in compressible flow can be more than four times larger than that predicted from incompressible theory. Furthermore, the effect of the ratio of specific heats on the unsteady force becomes more pronounced as the Mach number increases.

Sign in / Sign up

Export Citation Format

Share Document