Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity

1995 ◽  
Vol 283 ◽  
pp. 141-173 ◽  
Author(s):  
A. L. Yarin ◽  
D. A. Weiss
Keyword(s):  
Experimental Data ◽  
Capillary Waves ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Charge Coupled Device ◽  
New Type ◽  
Self Similar ◽  
Onset Velocity ◽  
A Charge ◽  
The Impact

The impact of drops impinging one by one on a solid surface is studied experimentally and theoretically. The impact process is observed by means of a charge-coupled-device camera, its pictures processed by computer. Low-velocity impact results in spreading and in propagation of capillary waves, whereas at higher velocities splashing (i.e. the emergence of a cloud of small secondary droplets, absent in the former case) sets in. Capillary waves are studied in some detail in separate experiments. The dynamics of the extension of liquid lamellae produced by an impact in the case of splashing is recorded. The secondary-droplet size distributions and the total volume of these droplets are measured, and the splashing threshold is found as a function of the impact parameters.The pattern of the capillary waves is predicted to be self-similar. The calculated wave profile agrees well with the experimental data. It is shown theoretically that the splashing threshold corresponds to the onset of a velocity discontinuity propagating over the liquid layer on the wall. This discontinuity shows several aspects of a shock. In an incompressible liquid such a discontinuity can only exist in the presence of a sink at its front. The latter results in the emergence of a circular crown-like sheet virtually normal to the wall and propagating with the discontinuity. It is predicted theoretically and recorded in the experiment. The crown is unstable owing to the formation of cusps at the free rim at its top edge, which results in the splashing effect. The onset velocity of splashing and the rate of propagation of the kinematic discontinuity are calculated and the theoretical results agree fairly well with the experimental data. The structure of the discontinuity is shown to match the outer solution.

Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates

2014 ◽  
Vol 566 ◽  
pp. 463-467
Author(s):  
Pu Xue ◽  
H.H. Chen ◽  
W. Guo
Keyword(s):  
Experimental Data ◽  
Residual Strength ◽  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Numerical Results ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

This paper studies the impact damage under low velocity impact for composite laminates based on a nonlinear progressive damage model. Damage evolution is described by the framework of the continuum damage mechanics. The real impact damage status of composite laminates has been used to analyze the residual compressive strength instead of assumptions on damage area after impact. The validity of the methodologies has been demonstrated by comparing the numerical results with the experimental data available in literature. The delamination area has an error of 11.3%. The errors of residual strength and compressive displacement are 8.9% and 15%, which indicate that the numerical results matched well with the experimental data.

Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches

2016 ◽  
Vol 20 (1) ◽  
pp. 42-69 ◽  
Author(s):  
Vincenzo Crupi ◽  
Emre Kara ◽  
Gabriella Epasto ◽  
Eugenio Guglielmino ◽  
Halil Aykul
Keyword(s):  
Experimental Data ◽  
Sandwich Structures ◽  
Low Velocity Impact ◽  
Balance Model ◽  
Model Parameters ◽  
Low Velocity ◽  
Internal Damage ◽  
Limit Loads ◽  
Load Carrying ◽  
The Impact

Honeycomb sandwich structures are increasingly used in the automotive, aerospace and shipbuilding industries where fuel savings, increase in load carrying capacity, vehicle safety and decrease in gas emissions are very important aspects. The aim of this study was to develop the theoretical methods, initially proposed by the authors and by other researchers for the prediction of low-velocity impact responses of sandwich structures. The developed methods were applied to sandwich structures with aluminium honeycomb cores and glass-epoxy facings for the assessment of impact parameters and for the prediction of limit loads. The values of model parameters were compared with data reported in literature and the predictions of the limit loads were validated by means of the experimental data. Good achievement was obtained between the results of the theoretical models and the experimental data. The failure mode and the internal damage of the sandwich panels have been investigated using 3D computed tomography, which allowed the evaluation of parameters of energy balance model, and infrared thermography, which allowed the detection of the temperature evolution of the specimens during the tests. The experimental and theoretical results demonstrated that the use of glass-epoxy reinforcement on aluminium honeycomb sandwiches enhances the energy absorption and load carrying capacities.

Characterisation of the impact induced damage in composites by cross-comparison among experimental non-destructive evaluation techniques and numerical simulations

2016 ◽  
Vol 231 (16) ◽  
pp. 3077-3090 ◽  
Author(s):  
A Riccio ◽  
S Saputo ◽  
A Sellitto ◽  
V Lopresto
Keyword(s):  
Experimental Data ◽  
Numerical Model ◽  
Composite Plates ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Premature Failure ◽  
Explicit Finite Element ◽  
The Impact ◽  
Non Destructive

Composite fibre-reinforced materials, under low velocity impacts, can experience simultaneous interacting failure phenomena, such as intra-laminar damage, fibre breakage and matrix cracking, and inter-laminar damage such as delaminations. These failure mechanisms are usually the subject of extensive investigations because they can cause a significant reduction in strength of composites structures leading to premature failure. In the present work, composite plates under low velocity impact are investigated. Experimental data, such as experimental curves and images from non-destructive inspections, are used to characterise the low velocity impacts-induced damage in conjunction with a non-linear explicit Finite element numerical model. The adopted numerical model, implemented in the FE code (Abaqus/Explicit) by a user-defined material subroutine (VUMAT), has been demonstrated to be very effective in predicting the damage onset and evolution and, in general, able to correctly integrate the experimental data by providing useful information about the impact damage localisation and evolution.

Response and failure modes of biaxial warp-knitted flexible composite subject to low-velocity impact

2021 ◽  
pp. 152808372110154
Author(s):  
Ziyu Zhao ◽  
Tianming Liu ◽  
Pibo Ma
Keyword(s):  
Impact Energy ◽  
Linear Density ◽  
Failure Modes ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Minor Effect ◽  
Low Velocity ◽  
Velocity Impact ◽  
Flexible Composites ◽  
The Impact

In this paper, biaxial warp-knitted fabrics were produced with different high tenacity polyester linear density and inserted yarns density. The low-velocity impact property of flexible composites made of polyurethane as matrix and biaxial warp-knitted fabric as reinforcement has been investigated. The effect of impactor shape and initial impact energy on the impact response of flexible composite is tested. The results show that the initial impact energy have minor effect on the impact response of the biaxial warp-knitted flexible composites. The impact resistance of flexible composite specimen increases with the increase of high tenacity polyester linear density and inserted yarns density. The damage morphology of flexible composite materials is completely different under different impactor shapes. The findings have theoretical and practical significance for the applications of biaxial warp-knitted flexible composite.

Energy absorbed ability and damage analysis for honeycomb sandwich material of bio-inspired micro aerial vehicle under low velocity impact

2020 ◽  
pp. 095440622097542
Author(s):  
Jianxun Du ◽  
Peng Hao ◽  
Mabao Liu ◽  
Rui Xue ◽  
Lin’an Li
Keyword(s):  
Honeycomb Structure ◽  
Low Velocity Impact ◽  
Parameter Study ◽  
Low Velocity ◽  
Micro Aerial Vehicle ◽  
Thin Walled Structures ◽  
Wide Range ◽  
Aerial Vehicle ◽  
Thin Walled ◽  
The Impact

Because of the advantages of light weight, small size, and good maneuverability, the bio-inspired micro aerial vehicle has a wide range of application prospects and development potential in military and civil areas, and has become one of the research hotspots in the future aviation field. The beetle’s elytra possess high strength and provide the protection of the abdomen while being functional to guarantee its flight performance. In this study, the internal microstructure of beetle’s elytra was observed by scanning electron microscope (SEM), and a variety of bionic thin-walled structures were proposed and modelled. The energy absorption characteristics and protective performance of different configurations of thin-walled structures with hollow columns under impact loading was analyzed by finite element method. The parameter study was carried out to show the influence of the velocity of impactor, the impact angle of the impactor and the wall thickness of honeycomb structure. This study provides an important inspiration for the design of the protective structure of the micro aerial vehicle.

Low Velocity Impact Resistance of CPVC Pipes Exposed to Natural Outdoor Weathering Conditions

2012 ◽  
Vol 445 ◽  
pp. 959-964
Author(s):  
Z. Khan ◽  
Necar Merah ◽  
A. Bazoune ◽  
S. Furquan
Keyword(s):  
Impact Resistance ◽  
Outdoor Exposure ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Pipe Material ◽  
Low Velocity ◽  
Impact Energies ◽  
The Impact ◽  
Impact Events ◽  
Outdoor Weathering

Low velocity drop weight impact testing of CPVC pipes was conducted on 160 mm long pipe sections obtained from 4-inch (100 mm) diameter schedule 80 pipes. Impact test were carried out for the base (as received) pipes and after their exposure to out door natural weathering conditions in Dhahran, Saudi Arabia. The results of the impact testing on the natural (outdoor exposure) broadly suggest that the natural outdoor exposures produce no change in the impact resistance of CPVC pipe material for the impact events carrying low incident energies of 10 and 20J. At the impact energies of 35 and 50J the natural outdoor exposures appear to cause appreciable degradation in the impact resistance of the CPVC pipe material. This degradation is noted only for the longer exposure periods of 12 and 18 months.

Coda Waves for Health Monitoring of Composites Under Low-Velocity Impact

2021 ◽  
Author(s):  
Subal Sharma ◽  
Vinay Dayal
Keyword(s):  
Ultrasonic Waves ◽  
Coda Waves ◽  
Low Velocity Impact ◽  
Coda Wave ◽  
Low Velocity ◽  
Fibrous Composite Material ◽  
Velocity Impact ◽  
Isotropic Composite ◽  
The Impact ◽  
Impact Damages

Abstract Coda waves have been shown to be sensitive to lab-controlled defects such as very small holes in fibrous composite material. In the real world, damages are subtler and more irregular. The main objective of this work is to investigate coda wave capability to detect low-velocity impact damages. The emphasis is to detect the presence of barely visible impact damages using ultrasonic waves. Detection of incipient damage state is important as it will grow over the life of the structure. Differential features, previously used in similar work, have been utilized to detect realistic impact damages on carbon fiber composites. Quasi-isotropic composite laminates were subjected to low-velocity impact energy ranging from 2J to 4.5J. Two differential features reported could be used detect the presence of damage. It is also observed that ply orientation can be a deterministic factor for indicating damages. The size and shape of the impact damage has been characterized using ultrasonic C-scans. Results indicate that coda waves can be used for the detection of damage due to low-velocity impact.

Low Velocity and Compression-After-Impact Response of Pin-Reinforced Sandwich Composites

1999 ◽  
Author(s):  
Uday K. Vaidya ◽  
Mohan V. Kamath ◽  
Mahesh V. Hosur ◽  
Anwarul Haque ◽  
Shaik Jeelani
Keyword(s):  
Impact Testing ◽  
Low Velocity Impact ◽  
Sandwich Composites ◽  
Low Velocity ◽  
Static Compression ◽  
Velocity Impact ◽  
Transverse Stiffness ◽  
Impact Studies ◽  
Compression After Impact ◽  
The Impact

Abstract In the current work, sandwich composite structures with innovative constructions referred to as Z-pins, or truss core pins are investigated, in conjunction with traditional honeycomb and foam core sandwich constructions, such that they exhibit enhanced transverse stiffness, high damage resistance and furthermore, damage tolerance to impact. While the investigations pertaining to low velocity impact have appeared recently in Vaidya et al. 1999, the current paper deals with compression-after-impact studies conducted to evaluate the residual properties of sandwich composites “with” and “without” reinforced foam cores. The resulting sandwich composites have been investigated for their low velocity (< 5 m/sec) impact loading response using instrumented impact testing at energy levels ranging from 5 J to 50 J impact energy. The transverse stiffness of the cores and their composites has also been evaluated through static compression studies. Compression-after-impact studies were then performed on the sandwich composites with traditional and pin-reinforcement cores. Supporting vibration studies have been conducted to assess the changes in stiffness of the samples as a result of the impact damage. The focus of this paper is on the compression-after-impact (CAI) response and vibration studies with accompanying discussion pertaining to the low velocity impact.

Experimental Investigation of Impacted and Non-Impacted Composite Laminates under Compressive Loading

2011 ◽  
Vol 284-286 ◽  
pp. 607-610
Author(s):  
Jiang Tao Ruan ◽  
Min Shen ◽  
Jing Wei Tong ◽  
Shi Bin Wang ◽  
Francesco Aymerich ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Optical Measurement ◽  
Speckle Pattern ◽  
Compressive Loading ◽  
Laminated Plates ◽  
Low Velocity Impact ◽  
Compressive Deformation ◽  
Electronic Speckle Pattern Interferometry ◽  
Low Velocity ◽  
The Impact

In this paper, the deformation measurements of impacted and non-impacted composite laminates under compressive loading are taken. [03/903]S orientated cross-ply laminated plates with impact delamination and without delamination are tested using an anti-buckling testing device in compression experiment. The delamination is induced by low-velocity impact test at the impact energy level of 3.105J. For both impacted and non-impacted specimens, the compressive deformation is measured by a carrier electronic speckle pattern interferometry (CESPI) optical measurement technique. It is found that the deformation behavior of the two specimens presents a mixed deformation mode. However, the delamination has significant effect on the compressive deformation of composite laminates.

Sign in / Sign up

Export Citation Format

Share Document