scholarly journals Coherent interaction of atoms with a beam of light confined in a light cage

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Flavie Davidson-Marquis ◽  
Julian Gargiulo ◽  
Esteban Gómez-López ◽  
Bumjoon Jang ◽  
Tim Kroh ◽  
...  
Keyword(s):  
Single Photon ◽  
Electromagnetically Induced Transparency ◽  
Low Cost ◽  
Atomic Layer ◽  
Planar Waveguides ◽  
Hollow Core ◽  
Optical Fields ◽  
Cage Structure ◽  
Coherent Interaction ◽  
On Chip

AbstractControlling coherent interaction between optical fields and quantum systems in scalable, integrated platforms is essential for quantum technologies. Miniaturised, warm alkali-vapour cells integrated with on-chip photonic devices represent an attractive system, in particular for delay or storage of a single-photon quantum state. Hollow-core fibres or planar waveguides are widely used to confine light over long distances enhancing light-matter interaction in atomic-vapour cells. However, they suffer from inefficient filling times, enhanced dephasing for atoms near the surfaces, and limited light-matter overlap. We report here on the observation of modified electromagnetically induced transparency for a non-diffractive beam of light in an on-chip, laterally-accessible hollow-core light cage. Atomic layer deposition of an alumina nanofilm onto the light-cage structure was utilised to precisely tune the high-transmission spectral region of the light-cage mode to the operation wavelength of the atomic transition, while additionally protecting the polymer against the corrosive alkali vapour. The experiments show strong, coherent light-matter coupling over lengths substantially exceeding the Rayleigh range. Additionally, the stable non-degrading performance and extreme versatility of the light cage provide an excellent basis for a manifold of quantum-storage and quantum-nonlinear applications, highlighting it as a compelling candidate for all-on-chip, integrable, low-cost, vapour-based photon delay.

scholarly journals All-optical reversible single-photon isolation at room temperature

2021 ◽  
Vol 7 (12) ◽  
pp. eabe8924
Author(s):  
Ming-Xin Dong ◽  
Ke-Yu Xia ◽  
Wei-Hang Zhang ◽  
Yi-Chen Yu ◽  
Ying-Hao Ye ◽  
...  
Keyword(s):  
Information Processing ◽  
Quantum Information ◽  
Insertion Loss ◽  
High Speed ◽  
Room Temperature ◽  
Quantum Information Processing ◽  
Single Photon ◽  
Electromagnetically Induced Transparency ◽  
All Optical ◽  
On Chip

Nonreciprocal devices operating at the single-photon level are fundamental elements for quantum technologies. Because magneto-optical nonreciprocal devices are incompatible for magnetic-sensitive or on-chip quantum information processing, all-optical nonreciprocal isolation is highly desired, but its realization at the quantum level is yet to be accomplished at room temperature. Here, we propose and experimentally demonstrate two regimes, using electromagnetically induced transparency (EIT) or a Raman transition, for all-optical isolation with warm atoms. We achieve an isolation of 22.52 ± 0.10 dB and an insertion loss of about 1.95 dB for a genuine single photon, with bandwidth up to hundreds of megahertz. The Raman regime realized in the same experimental setup enables us to achieve high isolation and low insertion loss for coherent optical fields with reversed isolation direction. These realizations of single-photon isolation and coherent light isolation at room temperature are promising for simpler reconfiguration of high-speed classical and quantum information processing.

scholarly journals Indistinguishable Photons from a Single Molecule under Pulsed Excitation

2021 ◽  
Vol 255 ◽  
pp. 06002
Author(s):  
Pietro Lombardi ◽  
Maja Colautti ◽  
Rocco Duquennoy ◽  
Ghulam Murtaza ◽  
Prosenjit Majumder ◽  
...  
Keyword(s):  
Single Molecule ◽  
Single Photon ◽  
Low Cost ◽  
Photon Emission ◽  
Light Sources ◽  
Single Photons ◽  
Quantum Communications ◽  
Ideal Quantum ◽  
On Chip ◽  
Key Resources

Quantum light sources are crucial for the future of quantum photonic technologies and, among them, single photons on-demand are key resources in quantum communications and information processing. Ideal quantum emitters providing indistinguishable photons in a clocked manner, negligible decoherence and spectral diffusion, and with potential for scalability are today still a major challenge. We report on photostable and indistinguishable single photon emission from dibenzoterrylene molecules isolated in anthracene nanocrystals (DBT:Ac NCs) at 3K. The visibility of two-photon interference is preserved even when they are separated more than thirty times the excited-state lifetime, or ten fluorescence cycles. One of the advantages of organic molecules is the low-cost mass production of nominally identical emitters, that also allow for on-chip integration. These aspects combined with high spectral stability and coherence make them promising for applications and future quantum technologies.

scholarly journals Purcell-Enhanced and Indistinguishable Single-Photon Generation from Quantum Dots Coupled to On-Chip Integrated Ring Resonators

Nano Letters ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 6357-6363 ◽  
Author(s):  
Łukasz Dusanowski ◽  
Dominik Köck ◽  
Eunso Shin ◽  
Soon-Hong Kwon ◽  
Christian Schneider ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Single Photon ◽  
Ring Resonators ◽  
On Chip ◽  
Photon Generation

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

scholarly journals On-chip sampling of optical fields with attosecond resolution

2021 ◽  
Author(s):  
Mina R. Bionta ◽  
Felix Ritzkowsky ◽  
Marco Turchetti ◽  
Yujia Yang ◽  
Dario Cattozzo Mor ◽  
...  
Keyword(s):  
Optical Fields ◽  
On Chip

scholarly journals Engineered tunneling layer with enhanced impact ionization for detection improvement in graphene/silicon heterojunction photodetectors

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Jun Yin ◽  
Lian Liu ◽  
Yashu Zang ◽  
Anni Ying ◽  
Wenjie Hui ◽  
...  
Keyword(s):  
High Performance ◽  
Impact Ionization ◽  
Low Cost ◽  
Atomic Layer ◽  
Light Illumination ◽  
Insulation Material ◽  
Defect States ◽  
Uv Illumination ◽  
Layer Deposition ◽  
The Impact

AbstractHere, an engineered tunneling layer enhanced photocurrent multiplication through the impact ionization effect was proposed and experimentally demonstrated on the graphene/silicon heterojunction photodetectors. With considering the suitable band structure of the insulation material and their special defect states, an atomic layer deposition (ALD) prepared wide-bandgap insulating (WBI) layer of AlN was introduced into the interface of graphene/silicon heterojunction. The promoted tunneling process from this designed structure demonstrated that can effectively help the impact ionization with photogain not only for the regular minority carriers from silicon, but also for the novel hot carries from graphene. As a result, significantly enhanced photocurrent as well as simultaneously decreased dark current about one order were accomplished in this graphene/insulation/silicon (GIS) heterojunction devices with the optimized AlN thickness of ~15 nm compared to the conventional graphene/silicon (GS) devices. Specifically, at the reverse bias of −10 V, a 3.96-A W−1 responsivity with the photogain of ~5.8 for the peak response under 850-nm light illumination, and a 1.03-A W−1 responsivity with ∼3.5 photogain under the 365 nm ultraviolet (UV) illumination were realized, which are even remarkably higher than those in GIS devices with either Al2O3 or the commonly employed SiO2 insulation layers. This work demonstrates a universal strategy to fabricate broadband, low-cost and high-performance photo-detecting devices towards the graphene-silicon optoelectronic integration.

scholarly journals Innovative Polymeric Hybrid Nanocomposites for Application in Photocatalysis

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1184
Author(s):  
Maria Cantarella ◽  
Giuliana Impellizzeri ◽  
Alessandro Di Mauro ◽  
Vittorio Privitera ◽  
Sabrina Carola Carroccio
Keyword(s):  
Hybrid Systems ◽  
Hybrid Materials ◽  
Large Scale ◽  
Mechanical Stability ◽  
Low Cost ◽  
Atomic Layer ◽  
Hybrid Nanocomposites ◽  
Polymeric Nanocomposites ◽  
Wastewater Remediation ◽  
Antibacterial Performance

The immobilization of inorganic nanomaterials on polymeric substrates has been drawing a lot of attention in recent years owing to the extraordinary properties of the as-obtained materials. The hybrid materials, indeed, combine the benefits of the plastic matter such as flexibility, low-cost, mechanical stability and high durability, with them deriving from their inorganic counterparts. In particular, if the inorganic fillers are nanostructured photocatalysts, the originated hybrid systems will be able to utilize the energy delivered by light, catalysing chemical reactions in a sustainable pathway. Most importantly, since the nanofillers can be ad-hoc anchored to the macromolecular structure, their release in the environment will be prevented, thus overcoming one of the main restrictions that impedes their applications on a large scale. In this review, several typologies of hybrid photocatalytic nanomaterials, obtained by using both organic and inorganic semiconductors and realized with different synthetic protocols, were reported and discussed. In the first part of the manuscript, nanocomposites realized by simply blending the TiO2 or ZnO nanomaterials in thermoplastic polymeric matrices are illustrated. Subsequently, the atomic layer deposition (ALD) technique is presented as an excellent method to formulate polymeric nanocomposites. Successively, some examples of polyporphyrins hybrid systems containing graphene, acting as photocatalysts under visible light irradiation, are discussed. Lastly, photocatalytic polymeric nanosponges, with extraordinary adsorption properties, are shown. All the described materials were deeply characterized and their photocatalytic abilities were evaluated by the degradation of several organic water pollutants such as dyes, phenol, pesticides, drugs, and personal care products. The antibacterial performance was also evaluated for selected systems. The relevance of the obtained results is widely overviewed, opening the route for the application of such multifunctional photocatalytic hybrid materials in wastewater remediation.

scholarly journals Design of a Real-Time Breakdown Voltage and On-Chip Temperature Monitoring System for Single Photon Avalanche Diodes

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 25
Author(s):  
Shijie Deng ◽  
Alan P. Morrison ◽  
Yong Guo ◽  
Chuanxin Teng ◽  
Ming Chen ◽  
...  
Keyword(s):  
Real Time ◽  
Breakdown Voltage ◽  
Count Rate ◽  
Single Photon ◽  
Photon Counting ◽  
Temperature Monitoring ◽  
Dark Count ◽  
Chip Temperature ◽  
Avalanche Diodes ◽  
On Chip

The design and implementation of a real-time breakdown voltage and on-chip temperature monitoring system for single photon avalanche diodes (SPADs) is described in this work. In the system, an on-chip shaded (active area of the detector covered by a metal layer) SPAD is used to provide a dark count rate for the breakdown voltage and temperature calculation. A bias circuit was designed to provide a bias voltage scanning for the shaded SPAD. A microcontroller records the pulses from the anode of the shaded SPAD and calculates its real-time dark count rate. An algorithm was developed for the microcontroller to calculate the SPAD’s breakdown voltage and the on-chip temperature in real time. Experimental results show that the system is capable of measuring the SPAD’s breakdown voltage with a mismatch of less than 1.2%. Results also show that the system can provide real-time on-chip temperature monitoring for the range of −10 to 50 °C with errors of less than 1.7 °C. The system proposed can be used for the real-time SPAD’s breakdown voltage and temperature estimation for dual-SPADs or SPAD arrays chip where identical detectors are fabricated on the same chip and one or more dummy SPADs are shaded. With the breakdown voltage and the on-chip temperature monitoring, intelligent control logic can be developed to optimize the performance of the SPAD-based photon counting system by adjusting the parameters such as excess bias voltage and dead-time. This is particularly useful for SPAD photon counting systems used in complex working environments such as the applications in 3D LIDAR imaging for geodesy, geology, geomorphology, forestry, atmospheric physics and autonomous vehicles.

On-Chip Fabrication of None-Dead-Volume Microtips for ESI-MS Applications

2007 ◽  
Vol 121-123 ◽  
pp. 611-614
Author(s):  
Che Hsin Lin ◽  
Jen Taie Shiea ◽  
Yen Lieng Lin
Keyword(s):  
Surface Tension ◽  
Low Cost ◽  
Microfluidic Channel ◽  
Dead Volume ◽  
Esi Ms ◽  
Rapid Fabrication ◽  
Chip Fabrication ◽  
Novel Method ◽  
On Chip ◽  
Highly Uniform

This paper proposes a novel method to on-chip fabricate a none-dead-volume microtip for ESI-MS applications. The microfluidic chip and ESI tip are fabricated in low-cost plastic based materials using a simple and rapid fabrication process. A constant-speed-pulling method is developed to fabricate the ESI tip by pulling mixed PMMA glue using a 30-μm stainless wire through the pre-formed microfluidic channel. The equilibrium of surface tension of PMMA glue will result in a sharp tip after curing. A highly uniform micro-tip can be formed directly at the outlet of the microfluidic channel with minimum dead-volume zone. Detection of caffeine, myoglobin, lysozyme and cytochrome C biosamples confirms the microchip device can be used for high resolution ESI-MS applications.

Sign in / Sign up

Export Citation Format

Share Document