scholarly journals Observation of nanoscale opto-mechanical molecular damping as the origin of spectroscopic contrast in photo induced force microscopy

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad A. Almajhadi ◽  
Syed Mohammad Ashab Uddin ◽  
H. Kumar Wickramasinghe
Keyword(s):  
Self Assembly ◽  
Chemical Properties ◽  
Direct Consequence ◽  
Spectroscopic Technique ◽  
Optical Resonance ◽  
Force Microscopy ◽  
Copolymer Films ◽  
Contrast Mechanism ◽  
Spectroscopic Information ◽  
Mechanical Damping

Abstract Infrared photoinduced force microscopy (IR-PiFM) is a scanning probe spectroscopic technique that maps sample morphology and chemical properties on the nanometer (nm)-scale. Fabricated samples with nm periodicity such as self-assembly of block copolymer films can be chemically characterized by IR-PiFM with relative ease. Despite the success of IR-PiFM, the origin of spectroscopic contrast remains unclear, preventing the scientific community from conducting quantitative measurements. Here we experimentally investigate the contrast mechanism of IR-PiFM for recording vibrational resonances. We show that the measured spectroscopic information of a sample is directly related to the energy lost in the oscillating cantilever, which is a direct consequence of a molecule excited at its vibrational optical resonance—coined as opto-mechanical damping. The quality factor of the cantilever and the local sample polarizability can be mathematically correlated, enabling quantitative analysis. The basic theory for dissipative tip-sample interactions is introduced to model the observed opto-mechanical damping.

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

2019 ◽  
Author(s):  
Kevin N. Baumann ◽  
Luca Piantanida ◽  
Javier García-Nafría ◽  
Diana Sobota ◽  
Kislon Voïtchovsky ◽  
...  
Keyword(s):  
Self Assembly ◽  
Mechanical Stability ◽  
Lipid Vesicles ◽  
The Self ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cryo Electron Microscopy ◽  
Further Development ◽  
Liposome Surface ◽  
Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

scholarly journals Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 13 ◽  
Author(s):  
Bin Zhang ◽  
Jaehyun Lee ◽  
Mincheol Kim ◽  
Naeeung Lee ◽  
Hyungdong Lee ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Storage Devices ◽  
Laminar Structure ◽  
Jet Printing

The macroscopic assembly of two-dimensional materials into a laminar structure has received considerable attention because it improves both the mechanical and chemical properties of the original materials. However, conventional manufacturing methods have certain limitations in that they require a high temperature process, use toxic solvents, and are considerably time consuming. Here, we present a new system for the self-assembly of layer-by-layer (LBL) graphene oxide (GO) via an electrohydrodynamic (EHD) jet printing technique. During printing, the orientation of GO flakes can be controlled by the velocity distribution of liquid jet and electric field-induced alignment spontaneously. Closely-packed GO patterns with an ordered laminar structure can be rapidly realized using an interfacial assembly process on the substrates. The surface roughness and electrical conductivity of the LBL structure were significantly improved compared with conventional dispensing methods. We further applied this technique to fabricate a reduced graphene oxide (r-GO)-based supercapacitor and a three-dimensional (3D) metallic grid hybrid ammonia sensor. We present the EHD-assisted assembly of laminar r-GO structures as a new platform for preparing high-performance energy storage devices and sensors.

scholarly journals Polymeric Drug Delivery System Based on Pluronics for Cancer Treatment

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3610
Author(s):  
Jialin Yu ◽  
Huayu Qiu ◽  
Shouchun Yin ◽  
Hebin Wang ◽  
Yang Li
Keyword(s):  
Drug Delivery ◽  
Self Assembly ◽  
Drug Delivery Systems ◽  
Tumor Therapy ◽  
Chemical Properties ◽  
Drug Carriers ◽  
Disease Diagnosis ◽  
Delivery Systems ◽  
Polymeric Drug Delivery ◽  
Physical And Chemical

Pluronic polymers (pluronics) are a unique class of synthetic triblock copolymers containing hydrophobic polypropylene oxide (PPO) and hydrophilic polyethylene oxide (PEO) arranged in the PEO-PPO-PEO manner. Due to their excellent biocompatibility and amphiphilic properties, pluronics are an ideal and promising biological material, which is widely used in drug delivery, disease diagnosis, and treatment, among other applications. Through self-assembly or in combination with other materials, pluronics can form nano carriers with different morphologies, representing a kind of multifunctional pharmaceutical excipients. In recent years, the utilization of pluronic-based multi-functional drug carriers in tumor treatment has become widespread, and various responsive drug carriers are designed according to the characteristics of the tumor microenvironment, resulting in major progress in tumor therapy. This review introduces the specific role of pluronic-based polymer drug delivery systems in tumor therapy, focusing on their physical and chemical properties as well as the design aspects of pluronic polymers. Finally, using newer literature reports, this review provides insights into the future potential and challenges posed by different pluronic-based polymer drug delivery systems in tumor therapy.

scholarly journals Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Yang Dang ◽  
Yu Cheng ◽  
Yukun Zhou ◽  
Yifei Huang ◽  
Kaige Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Organic Pollutant ◽  
Energy Dispersive Spectrometer ◽  
Chemical Properties ◽  
Anodic Alumina ◽  
Alumina Substrate ◽  
Reusable Catalyst ◽  
X Ray ◽  
Nanoporous Anodic Alumina

The treatment of organic dye contaminants in wastewaters has now becoming more imperative. Fenton-like degradation of methylene blue (MB) and methyl orange (MO) in aqueous solution was investigated by using a nanostructure that a layer of CuCl2 nanoflake film grown on the top surface of nanoporus anodic alumina substrate (nano-PAA-CuCl2) as catalyst. The new nano-PAA-CuCl2 composite was fabricated with self-assembly approach, that is, a network porous structure film composed of CuCl2 nanoflake grown on the upper surface of nanoporous anodic alumina substrate, and the physical and chemical properties are characterized systematically with the X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and high-resolution transmission electron microscopy (HRTEM), Energy Dispersive Spectrometer (EDS), X-ray photoelectron spectroscopy (XPS). The experimental results showed that the nano-PAA-CuCl2 catalyst presented excellent properties for the degradation of two typical organic pollutants such as MB and MO, which were almost completely degraded with 8 × 10−4mol/L nano-PAA-CuCl2 catalyst after 46 min and 60 min at reaction conditions of H2O2 18 mM and 23 mM, respectively. The effects of different reaction parameters such as initial pH, H2O2 concentration, catalyst morphology and temperature were attentively studied. And more, the stability and reusability of nano-PAA-CuCl2 were examined. Finally, the mechanism of MB and MO degradation by the nano-PAA-CuCl2/H2O2 system was proposed, based on the experimental data of the BCA and the temperature-programmed reduction (H2-TPR) and theoretical analysis, the reaction kinetics belonged to the pseudo-first-order equation. This new nanoporous composite material and preparation technology, as well as its application in Fenton-like reaction, provide an effective alternative method with practical application significance for wastewater treatment.

Infrared Characterization of PMMA-SiO2 Hybrid Glasses Obtained by Sol-Gel Process

2010 ◽  
Vol 1278 ◽  
Author(s):  
L.L. Díaz-Flores ◽  
A. S. López Rodríguez ◽  
P. SifuentesGallardo ◽  
M.A. Hernàndez Rivera ◽  
M.a Garnica Romo ◽  
...  
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
Hybrid Coatings ◽  
Force Microscopy ◽  
Air Atmosphere ◽  
Atomic Force ◽  
Sol Gel Process ◽  
Traditional Process ◽  
And Chemical Properties

AbstractThis work is about the production of hybrid coatings of the system SiO2-PMMA (PMMA, polymethylmethacrylate). These materials have interesting mechanical and chemical properties useful for anticorrosive and wear resistance applications. SiO2-PMMA hybrids were obtained by the sol-gel traditional process, using tetraethylorthosilicate (TEOS) and methylmethacrylate (MMA) by Aldrich Co, as starting reagents. The SiO2:PMMA ratio was varied from 0:1 to about 1:1 at air atmosphere deposition. The coatings were obtained on acrylic sheets and silicon wafers. A diversity of coatings with chemical composition ranging from SiO2 and PMMA to obtain the SiO2-PMMA hybrids were obtained. Infrared (IR) and atomic force microscopy (AFM), were performed to determinate structural and morphological behavior.

scholarly journals Morphometric characterization of fibrinogen's αC regions and their role in fibrin self-assembly and molecular organization

Nanoscale ◽  
2017 ◽  
Vol 9 (36) ◽  
pp. 13707-13716 ◽  
Author(s):  
Anna D. Protopopova ◽  
Rustem I. Litvinov ◽  
Dennis K. Galanakis ◽  
Chandrasekaran Nagaswami ◽  
Nikolay A. Barinov ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Self Assembly ◽  
Molecular Organization ◽  
Microscopy Imaging ◽  
Force Microscopy ◽  
Atomic Force ◽  
Atomic Force Microscopy Imaging ◽  
Morphometric Characterization

High-resolution atomic force microscopy imaging reveals the role of fibrinogen αC regions in the early stages of fibrin self-assembly.

Self-assembly layer-by-layer fabrication using porphyrin dye anion and polycation

2009 ◽  
Vol 13 (07) ◽  
pp. 774-778 ◽  
Author(s):  
Byung-Soon Kim ◽  
Young-A Son
Keyword(s):  
Ultrathin Films ◽  
Self Assembly ◽  
Film Surface ◽  
Layer By Layer ◽  
Preparation Technique ◽  
Force Microscopy ◽  
Atomic Force ◽  
Diallyldimethylammonium Chloride ◽  
Afm Analysis ◽  
Progressive Growth

In this study, self-assembled alternating film using poly(diallyldimethylammonium chloride) (PDDAC) and meso-tetrakis(4-carboxyphenyl)porphyrin (MTCP) was prepared as a multilayer deposition on glass substrate. This preparation technique for dye deposition may provide new feasibilities to achieve the manufacture of ultrathin films for nanotechnology application. The deposition films were characterized by UV-vis spectrophotometer and Atomic Force Microscopy (AFM) analysis. The results of UV-vis spectra showed that the absorbance characteristic of the multilayer films linearly increased with an increased number of PDDAC and MTCP bilayers. AFM analysis showed the film surface was relatively uniform and the progressive growth of layers was determined.

Constructive Molecular Dynamics Lattice Gases: Three-Dimensional Molecular Self-Assembly

2003 ◽  
Author(s):  
Martin Nilsson ◽  
Steen Rasmussen
Keyword(s):  
Molecular Dynamics ◽  
Self Assembly ◽  
Lattice Gas ◽  
Chemical Properties ◽  
Special Kind ◽  
Lattice Gases ◽  
Living Systems ◽  
Self Organization ◽  
Assembly Systems ◽  
Formal Systems

Realistic molecular dynamics and self-assembly is represented in a lattice simulation where water, water-hydrocarbons, and water-amphiphilic systems are investigated. The details of the phase separation dynamics and the constructive self-assembly dynamics are discussed and compared to the corresponding experimental systems. The method used to represent the different molecular types can easily be expended to include additional molecules and thus allow the assembly of more complex structures. This molecular dynamics (MD) lattice gas fills a modeling gap between traditional MD and lattice gas methods. Both molecular objects and force fields are represented by propagating information particles and all microscopic interactions are reversible. Living systems, perhaps the ultimate constructive dynamical systems, is the motivation for this work and our focus is a study of the dynamics of molecular self-assembly and self-organization. In living systems, matter is organized such that it spontaneously constructs intricate functionalities at all levels from the molecules up to the organism and beyond. At the lower levels of description, chemical reactions, molecular selfassembly and self-organization are the drivers of this complexity. We shall, in this chapter, demonstrate how molecular self-assembly and selforganization processes can be represented in formal systems. The formal systems are to be denned as a special kind of lattice gas and they are in a form where an obvious correspondence exists between the observables in the lattice gases and the experimentally observed properties in the molecular self-assembly systems. This has the clear advantage that by using these formal systems, theory, simulation, and experiment can be conducted in concert and can mutually support each other. However, a disadvantage also exists because analytical results are difficult to obtain for these formal systems due to their inherent complexity dictated by their necessary realism. The key to novelt simpler molecules (from lower levels), dynamical hierarchies are formed [2, 3]. Dynamical hierarchies are characterized by distinct observable functionalities at multiple levels of description. Since these higher-order structures are generated spontaneously due to the physico-chemical properties of their building blocks, complexity can come for free in molecular self-assembly systems. Through such processes, matter apparently can program itself into structures that constitute living systems [11, 27, 30].

Sign in / Sign up

Export Citation Format

Share Document