scholarly journals Diesel engine diagnostic training program

2020 ◽  
Vol 164 ◽  
pp. 12009 ◽  
Author(s):  
Alexander Ivanov ◽  
Vladimir Konovalov ◽  
Vladimir Lyandenbursky ◽  
Yuri Rodionov ◽  
Yuri Zakharov
Keyword(s):  
Diesel Engine ◽  
Computer Program ◽  
Learning Process ◽  
Technical Condition ◽  
Virtual Model ◽  
Diagnostic Equipment ◽  
Technical Personnel ◽  
Diagnostic Training ◽  
Almost All ◽  
The Cost

To optimize the learning process of working methods and the study of diagnostic equipment, it is advisable to use virtual simulators that simulate the process. The created virtual model vKAD-400 reproduces almost all the actions performed by the master diagnostician in determining the technical condition of a diesel engine. In the process of modeling using the editor, the algorithm of the "Diesel-Diagnostics" program was developed using the method of digitizing existing waveforms. Using the computer program "Diesel-Diagnostics" will reduce the cost of training students and technical personnel.

scholarly journals Dynamics simulation of mechanical gearbox vibration

2018 ◽  
Vol 234 ◽  
pp. 02002 ◽  
Author(s):  
Jan Furch ◽  
Cao Vu Tran
Keyword(s):  
Vibration Signal ◽  
Technical Condition ◽  
Dynamics Simulation ◽  
Virtual Model ◽  
Design Work ◽  
Practical Applications ◽  
3D Cad ◽  
Gearbox Vibration ◽  
The Cost ◽  
Multi Body

This paper focuses on creating a virtual model of mechanical gearbox used in medium-sized terrain vehicle using MSC.Adams software. This software is regarded as the most common and effective tool to simulate the gearbox as multibody system and to record and analyse the vibration signal from the gearbox. The paper makes an overview of modelling and simulation and performs an analysis with frequency spectrum. The paper demonstrates that it is possible to simulate vibration signals through the model of the gearbox created in 3D CAD software and then analyse in multi-body dynamics software MSC.Adams. Successful application of the virtual model not only help us decrease the cost of design work, but also help us identify the patterns of the vibration signal and the relations between the signal and the technical condition of the gearbox. The goal is to create a virtual model of a mechanical gearbox. In MSC.Adams, the vibration values of the rotating components can be detected in different gears. These values are then analysed and evaluated. The result is a simulation of fault states and identification of vibration frequencies for practical applications.

scholarly journals An explanatory study of the use of e-mail investor communication by South African listed companies

2016 ◽  
Vol 18 (1) ◽  
Author(s):  
Roelof Baard ◽  
George Nel
Keyword(s):  
Listed Companies ◽  
Future Research ◽  
Contact Method ◽  
Interactive Communication ◽  
Handling Performance ◽  
Corporate Websites ◽  
Use Of Social Media ◽  
Almost All ◽  
The Cost ◽  
E Mail

Background: Although research shows that almost all listed companies have corporate websites with dedicated investor relations (IR) sections that enable companies to ‘push’ information to investors, it was argued that such an asymmetrical approach to communication is insufficient for companies wishing to exercise good IR. The purpose of this study was to test the effectiveness of the Internet to act as a mechanism to achieve more interactive communication between companies and investors.Objectives: The objectives of the study were to measure the responsiveness, timeliness and relevance of companies’ responses to e-mail requests, and to test for the determinants (size, market-to-book ratio, profitability, leverage and liquidity) thereof.Method: The mystery investor approach and a content analysis were used to study the e-mail handling performance of companies. The associations between company-specific characteristics were statistically tested.Results: It was found that the e-mail handling performance of companies in this study was poor compared with previous studies. Significant relationships between company size and responsiveness and relevance, and between market-to-book ratio and relevance were reported, as well as between the contact method used to request information and relevance and the use of social media and timeliness.Conclusion: Specific areas where companies could improve their investor communications were identified. The need for further research was discussed to explain some of the relationships found, as well as those not found, in contrast to what was expected. Future research is warranted to examine the relationship between the e-mail handling performance of companies and information asymmetry and the cost of equity of companies.

DECcalc - A Program for the Calculation of Diffraction Elastic Constants from Single Crystal Coefficients

2011 ◽  
Vol 681 ◽  
pp. 417-419 ◽  
Author(s):  
Thorsten Manns ◽  
Berthold Scholtes
Keyword(s):  
Computer Program ◽  
Single Crystal ◽  
Elastic Constants ◽  
Single Phase ◽  
Proper Function ◽  
Almost All

A Matlab based computer program was developed which gives the possibility to calculate the diffraction elastic constants (DEC) of macroscopically isotropic, single phase materials from their single crystal elastic constants. The proper function of the program was confirmed by means of results from literature. In almost all cases the results from the program DECcalc could reproduce the values and diagrams given in the appropriate publications. Discrepancies could always be assigned to the use of different single crystal coefficients.

The use of natural conditions of the high alpine province of Dagestan for reproduction of prospective varieties and hybrids of potato

2021 ◽  
pp. 34-37
Author(s):  
В.К. Сердеров ◽  
Д.В. Сердерова
Keyword(s):  
Field Experiments ◽  
Climatic Conditions ◽  
High Yield ◽  
Potato Varieties ◽  
Caspian Lowland ◽  
The Republic ◽  
High Yielding Varieties ◽  
Almost All ◽  
The Cost ◽  
Mountain Province

Большое значение в увеличении продуктивности картофеля имеет внедрение в производство перспективных высокоурожайных сортов и гибридов, приспособленных к местным природно-климатическим условиям возделывания, от чего зависят эффективность отрасли и себестоимость продукции. Цель работы – изучить влияние климатических условий на продуктивность и качественные показатели сортов и гибридов картофеля, а также использование ими благоприятных почвенно-климатических условий высокогорья Республики Дагестан, для размножения и внедрения в производство новых перспективных, высокоурожайных, приспособленных к условиям среды выращивания сортов картофеля с комплексом хозяйственно-ценных признаков. Объектом изучения послужили сорта картофеля раннего, среднераннего и среднего сроков созревания российской, белорусской и иностранной селекции. Полевые опыты закладывали в 2014–2017 годах на высоте 2000–2200 м, на землях горного опорного пункта «Курахский» Курахского района и на равнинной провинции (Прикаспийской низменности) на территории дачного массива «Наука» Махачкалинского района Республики Дагестан. Схема посадки – 70×30 см, повторность – четырехкратная. Технология выращивания картофеля – гребневая. При проведении полевых опытов использовали общепринятые методики. Практически все сорта картофеля, выращенные на равнинной провинции, сформировали высокий урожай в первый год и при дальнейшем размножении в результате развития вирусных болезней резко снизили свои продуктивные качества. Наиболее высокая урожайность в среднем за три года отмечена у сортов Жуковский ранний (20,8 т/га), Импала (20,5 т/га), Невский (17,8 т/га), Предгорный (16,9 т/га) и Удача (16,3 т/га). В свою очередь, горная провинция Дагестана характеризовалась благоприятными почвенно-климатическими условиями для возделывания как продовольственного картофеля, так и для организации первичного семеноводства на безвирусной основе и размножения перспективных сортов этой культуры. В среднем за годы исследований в горной провинции по урожайности выделились сорта Сильвана (37,4 т/га), Удача (37,6 т/га), Рокко (33,3 т/га), Импала (31,7 т/га), Жуковский ранний (29,0 т/га), Предгорный (27,7 т/га) и Примобелла (27,7 т/га), а также гибриды № 12.40/17 (43,1 т/га) и № 13.61/61 (38,8 т/га). The introduction of promising high-yielding varieties and hybrids adapted to the local natural and climatic conditions of cultivation is of great importance in increasing the productivity of potatoes, which determines the efficiency of the industry and the cost of production. The aim of the work is to study the influence of climatic conditions on the productivity and quality indicators of potato varieties and hybrids, as well as their use of favorable soil and climatic conditions in the highlands of the Republic of Dagestan, for breeding and introducing into production new promising, high-yielding, adapted to the growing environment of potato varieties with a complex of economically valuable characteristics. The object of the study was potato varieties of early, mid-early and medium maturation periods of Russian, Belarusian and foreign selection. Field experiments were conducted in 2014–2017 at an altitude of 2000–2200 m, on the lands of the mountain stronghold Kurakhsky of the Kukhar district and on the plain province (the Caspian lowland) on the territory of the suburban area Nauka of the Makhachkala district of the Republic of Dagestan. The landing scheme is 70×30 cm, the repeatability is four times. The technology of growing potatoes is combed. When conducting field experiments, generally accepted methods were used. Almost all potato varieties grown in the lowland province formed a high yield in the first year and, with further propagation, as a result of the development of viral diseases, sharply reduced their productive qualities. The highest yield on average for three years was observed in the varieties Zhukovskiy ranniy (20.8 t/ha), Impala (20.5 t/ha), Nevsky (17.8 t/ha), Predgornyy (16.9 t/ha) and Udacha (16.3 t/ha). In turn, the mountain province of Dagestan was characterized by favorable soil and climatic conditions for the cultivation of both food potatoes, and for the organization of primary seed production on a virus-free basis and the reproduction of promising varieties of this crop. On average, over the years of research in the mountain province, the varieties Silvana (37.4 t/ha), Udacha (37.6 t/ha), Rocco (33.3 t/ha), Impala (31.7 t/ha), Zhukovskiy ranniy (29.0 t/ha), Predgornyy (27.7 t/ha) and Primobella (27.7 t/ha), as well as hybrids No.12.40/17 (43.1 t/ha) and No.13.61/61 (38.8 t/ha) were distinguished by yield.

THE TECHNICAL CONDITION OF THE SURVEYED HYDRAULIC UNITS IN THE MOSCOW REGION AND THE CLASSIFICATION FEATURES OF THEIR RESERVOIRS

2021 ◽  
pp. 69-79
Author(s):  
V. V. GRITSAN ◽  
Keyword(s):  
Technical Condition ◽  
Moscow Region ◽  
Risk Level ◽  
Ecological Framework ◽  
Safety Level ◽  
Repair Work ◽  
Hydraulic Unit ◽  
Technical Parameters ◽  
Characteristic Features ◽  
The Cost

The article presents the results of surveys of 311 class IV hydraulic structures carried out in 2016-2020 in the Moscow region. All the reservoirs of the surveyed hydraulic units were classified according to their characteristic features, the technical condition of culverts and dams was assessed, there was established the safety level of both separate structures and hydraulic units as a whole. During the surveys, the technical parameters of the surveyed structures were established, the state of each structure and the hydraulic unit as a whole was assessed, a possibility of their accident and a risk level for the downstream areas were considered. At the same time, recommendations were developed for the elimination of serious damage and, with the help of an examination, the amount of the cost of the necessary repair work was determined. The paper also assesses the issues of the ecological state of the areas where the hydraulic units are located and the hydraulic units themselves as blocks of the ecological framework of the territories.

Potential of existing online 24-hour dietary recall tools for national dietary surveys

2021 ◽  
pp. 1-62
Author(s):  
Rozenn Gazan ◽  
Florent Vieux ◽  
Ségolène Mora ◽  
Sabrina Havard ◽  
Carine Dubuisson
Keyword(s):  
Grey Literature ◽  
Quality Data ◽  
High Quality Data ◽  
Require Time ◽  
Dietary Recall ◽  
Dietary Surveys ◽  
Almost All ◽  
The Cost ◽  
Web Platform ◽  
Country Specific

Abstract Objective: To describe existing online 24-hour dietary recall (24hDR) tools in terms of functionalities and ability to tackle challenges encountered during national dietary surveys, such as maximizing response rates and collecting high-quality data from a representative sample of the population, while minimizing the cost and response burden. Design: A search (from 2000 to 2019) was conducted in peer-reviewed and grey literature. For each tool, information on functionalities, validation and user usability studies, and potential adaptability for integration into a new context was collected. Setting: Not country-specific Participants: General population Results: Eighteen online 24hDR tools were identified. Most were developed in Europe, for children ≥10 years old and/or for adults. Eight followed the five multiple-pass steps, but used various methodologies and features. Almost all tools (except three) validated their nutrient intake estimates, but with high heterogeneity in methodologies. User usability was not always assessed, and rarely by applying real-time methods. For researchers, eight tools developed a web platform to manage the survey and five appeared to be easily adaptable to a new context. Conclusions: Among the eighteen online 24hDR tools identified, the best candidates to be used in national dietary surveys should be those that were validated for their intake estimates, had confirmed user and researcher usability, and seemed sufficiently flexible to be adapted to new contexts. Regardless of the tool, adaptation to another context will still require time and funding, and this is probably the most challenging step.

scholarly journals TINGKAT KENYAMANAN LINGKUNGAN BELAJAR SEKOLAH MENENGAH ATAS (SMA) NEGERI DI KOTA DENPASAR

2016 ◽  
Vol 10 (1) ◽  
pp. 22
Author(s):  
Ni Luh Gede Ambarawati ◽  
Wayan Arthana ◽  
I Wayan Suarna
Keyword(s):  
High School ◽  
Learning Process ◽  
School Environment ◽  
Student Perception ◽  
Quality Standard ◽  
Comfort Level ◽  
Public High School ◽  
Class Room ◽  
Almost All ◽  
The City

A healthy andcomfortable school environmentis necessary,besidessupporting the learning process, it can also improve student achievement. Noiseisdisturbingin the learning process, as well as theavailability offacilities and infrastructure will greatly affectthe comfort ofthe studentsinthe school. The purpose ofthis research is to determinethe comfort level ofstate senior highschoolstudyinthe city of Denpasarin termsofnoise levels, the availability andmanagement ofschool facilities and infrastructure and student perception against school envirumental level. The research methodused isdescriptivequantitativemethod. The locationof the research wasconductedin 8 State Senior High Schoolinthe city of Denpasar. Measurements ofnoise levelsateach schoolis capturedfromninesample pointsbyusing asound level meterand surveyof schoolfacilities and infrastructurethat are environmentally friendly. The comfort level of public high school learning environment in the city of Denpasar based on the level of noise has exceeded the qualty standard 55 dB, with the highest noise in the school yard of 73,0 dB, which motor vechicles as the main caused. Temperature and humidity do not affect the level of comfort, because they already meet the standards. Lighting of class room in eight public high school in the city of Denpasar very well. Because it meets the quality standard. Availability and management infrastructure is optimal and adequate to support mostly high school in the city of Denpasar. Support in the facilities and infrastructure have been seen in SMAN 3 Denpasar. Almost all students in eight high school in the city of Denpasar stated that the school environment is comfortable, even SMAN 3 Denpasar stated very comfotable at around 62,85 per cent.

scholarly journals Методика для трибодиагностики судовых крейцкопфных дизелей на основе имитационного моделирования

2020 ◽  
Author(s):  
A.V. Golenishev ◽  
A.V. Nadezkin ◽  
M.E. Starchenko
Keyword(s):  
Diesel Engine ◽  
Simulation Model ◽  
Technical Condition ◽  
Operating Conditions ◽  
Marine Diesel Engine ◽  
Threshold Values ◽  
Piston Group ◽  
Marine Diesel ◽  
Cylinder Piston ◽  
Wear Products

Рассматриваются подходы по определению пороговых значений концентрации продуктов износа в отработанном цилиндровом масле, характеризующие переход объекта диагностирования судового крейцкопфного дизеля из одного технического состояния в другое. Показано, что существующие методики не учитывают индивидуальные особенности и техническое состояние деталей цилиндропоршневой группы. Предложено для решения задачи их трибодиагностики использовать разработанную имитационную модель, позволяющую провести моделирование процесса изнашивания цилиндровой втулки и поршневых колец судового дизеля и на основании полученных расчетов определить концентрацию продуктов износа поступивших в отработанное цилиндровое масло при различной скорости изнашивания трущихся деталей. Данные о фактической концентрации продуктов износа в отработанном цилиндровом масле в дальнейшем соотносятся с результатами моделирования, что позволяет оценить техническое состояние деталей цилиндропоршневой группы двигателя. Представлены результаты моделирования по определению пороговых значений концентрации продуктов износа в отработанном цилиндровом масле, характеризующее переход судового дизеля из исправного в несправное техническое состояние. Даны практические рекомендации по выбору пороговых значений содержания продуктов износа в отработанном цилиндровом масле для различных типов судовых крейцкопфных дизелей и условий их эксплуатации.The article examines approaches to determine the threshold values of the concentration of wear debris in used cylinder oil that characterize the transition of a ship crosshead diesel engine unit under test from one technical condition to another. It is shown that the existing methods do not take into account the individual characteristics and technical condition of the parts of the cylinder-piston group. To solve the problem of tribodiagnostics, it is proposed to use the developed simulation model, which allows modeling the wear process of the cylinder bushing and piston rings of a marine diesel engine and, based on the obtained results, determining the concentration of wear products issued in the used cylinder oil at different wear rates of the moving parts. The data on the actual concentration of wear products in the used cylinder oil are subsequently correlated with the simulation model results, which makes it possible to evaluate the technical condition of the parts of the engine cylinder-piston group. The article presents the results of modeling of threshold values determination of the concentration of wear products in used cylinder oil, that measure the transition of a marine diesel engine from a working condition to a malfunctioning technical condition. Practical recommendations are given on choosing threshold values for the concentration of wear products in used cylinder oil for various types of marine crosshead diesel engines and their operating conditions.

scholarly journals Analisis Biaya Cadangan Risiko Pinjaman dan Cadangan Risiko Pinjaman Dalam Laporan Auditor Independen Unit Pengelola Keuangan (Studi Kasus: Badan Keswadayaan Masyarakat di Kabupaten Bantul Provinsi DIY)

2016 ◽  
Vol 4 (2) ◽  
Author(s):  
Kurniawan Kurniawan ◽  
Dody Hapsoro
Keyword(s):  
Financial Reporting ◽  
Public Accounting ◽  
Loan Risk ◽  
Audit Result ◽  
Results Reporting ◽  
Almost All ◽  
The Cost ◽  
Keywords Cost

This study examines whether there are differences in the cost of the loan risk reserves and the loan risk reserves between audit results data and financial reporting. The research sample consisted of the audit results report on 50 BKM (Badan Keswadayaan Masyarakat) in Kabupaten Bantul Provinsi Daerah IstimewaYogyakarta whichhave been audited by Budiman, Wawan, Pamudji and Partners Public Accounting Firmin 2014. This study found that the cost of the loan risk allowances and loan risk allowances between audit result and reporting differed significantly. The study concluded that almost all of BKM not charge cost and reserve risk of the loan according collectibility list that is used as the source of the audit resultscalculation. Keywords: Cost of the loan risk reserves, loan risk reserves, audit results, reporting.

scholarly journals Utilizing Robotics for Learning English as a Foreign Language

2021 ◽  
Vol 102 ◽  
pp. 01013
Author(s):  
Dimitris Ziouzios ◽  
Antonios Chatzisavvas ◽  
Akrivi Chaschatzi ◽  
Nikolaos Baras ◽  
Tharrenos Bratitsis ◽  
...  
Keyword(s):  
Foreign Language ◽  
Learning Process ◽  
Formal Education ◽  
Information And Communications Technology ◽  
Educational Robotics ◽  
Communications Technology ◽  
Almost All ◽  
Learning English

In recent years, Information and communications technology (ICT) has become a fundamental element of almost all aspects of formal and non-formal education. Educational Robotics (ER) as an ICT subfield has triggered many studies of ER educational utilization as the training of a new foreign language. This paper aims at highlighting another perspective of knowledge, utilizing the ER for learning English as a Foreign Language (EFL). It presents educational scenarios explaining how the robot can be involved in the learning process.

Sign in / Sign up

Export Citation Format

Share Document