scholarly journals Changes in mineralogy and microstructure of a lime-treated silty soil during curing time

2020 ◽  
Vol 195 ◽  
pp. 03044
Author(s):  
Zi YING ◽  
Yu-jun Cui ◽  
Nadia Benahmed ◽  
Myriam Duc
Keyword(s):  
Mercury Intrusion Porosimetry ◽  
Soil Samples ◽  
Time Effect ◽  
Curing Time ◽  
X Ray Diffraction ◽  
Lime Treatment ◽  
Treated Soil ◽  
X Ray ◽  
Mercury Intrusion

Lime treatment is widely applied to improve the workability and long-term durability of soils. In this study, the curing time effect on the mineralogy and microstructure of lime-treated soil was investigated. The soil samples were prepared with 2 % lime and statically compacted at dry (w = 17 %) and wet (w = 20%) sides of optimum. X-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) were performed on lime-treated soil at various curing times. The presence of XRD peaks attributed to portlandite even after 150 days curing time indicated that it was not totally converted in cementitious compounds after reaction with silica and alumina from clay minerals. By contrast, no obvious XRD reflections of well-crystallized cementitious compounds were identified. Furthermore, all samples compacted at dry and wet side of optimum exhibited bi-modal pore size distribution, with a decrease of macro-pore frequency with increasing water content. The microstructure changes with increasing curing time did not follow monotonic tendency. On the whole, the quantities of pores less than 0.006 μm and micro-pores increased and the quantity of macro-pores decreased with increasing curing time due to the possible creation of poorly crystallized or amorphous cementitious compounds.

scholarly journals Enhancing carbonation and chloride resistance of autoclaved concrete by incorporating nano-CaCO3

2020 ◽  
Vol 9 (1) ◽  
pp. 998-1008
Author(s):  
Guo Li ◽  
Zheng Zhuang ◽  
Yajun Lv ◽  
Kejin Wang ◽  
David Hui
Keyword(s):  
Cement Hydration ◽  
Mercury Intrusion Porosimetry ◽  
Hardened Concrete ◽  
Optimal Dosage ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
Carbonation Depth ◽  
X Ray ◽  
Chloride Resistance

AbstractThree nano-CaCO3 (NC) replacement levels of 1, 2, and 3% (by weight of cement) were utilized in autoclaved concrete. The accelerated carbonation depth and Coulomb electric fluxes of the hardened concrete were tested periodically at the ages of 28, 90, 180, and 300 days. In addition, X-ray diffraction, thermogravimetry, and mercury intrusion porosimetry were also performed to study changes in the hydration products of cement and microscopic pore structure of concrete under autoclave curing. Results indicated that a suitable level of NC replacement exerts filling and accelerating effects, promotes the generation of cement hydration products, reduces porosity, and refines the micropores of autoclaved concrete. These effects substantially enhanced the carbonation and chloride resistance of the autoclaved concrete and endowed the material with resistances approaching or exceeding that of standard cured concrete. Among the three NC replacement ratios, the 3% NC replacement was the optimal dosage for improving the long-term carbonation and chloride resistance of concrete.

scholarly journals Strength and Solidification Mechanism of Silt Solidified by Polyurethane

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Fengyuan Li ◽  
Chaojie Wang ◽  
Yangyang Xia ◽  
Yanjie Hao ◽  
Peng Zhao ◽  
...  
Keyword(s):  
Unconfined Compressive Strength ◽  
Immersion Time ◽  
Mercury Intrusion Porosimetry ◽  
Polymer Content ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Grouting Material ◽  
Permeable Polymer ◽  
Solidification Mechanism

To determine the mechanism and strength characteristics of solidification of silt by a permeable polyurethane grouting material, the effects of polymer content, soil moisture, and immersion time on the unconfined compressive strength (UCS) of the silt have been studied. The results showed that the permeable polymer grouting material can significantly improve the performance of silt: (1) A higher amount of polymer produced a greater strength in the solidified soil. (2) The strength of the solidified soil increased as the immersion time was increased. (3) Moisture in the soil was not conducive to improving the strength of the solidified soil. The X-ray diffraction (XRD) and energy-dispersive spectroscopy (EDS) have proven that polyurethane does not react with the silt, but they could improve the strength of the silt through physical action. Mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) were performed to find that polymers can reduce soil porosity, and the addition of polyurethane improved the strength of the silt mainly through adhesion, wrapping, filling, and bridging.

Carbide slag–activated ground granulated blastfurnace slag for soft clay stabilization

2015 ◽  
Vol 52 (5) ◽  
pp. 656-663 ◽  
Author(s):  
Yaolin Yi ◽  
Liyang Gu ◽  
Songyu Liu ◽  
Anand J. Puppala
Keyword(s):  
Mercury Intrusion Porosimetry ◽  
Soft Clay ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Carbide Slag ◽  
Calcium Silicate Hydrates ◽  
Blastfurnace Slag ◽  
Ucs Test ◽  
Curing Age

This study addresses the use of an industry by-product, carbide slag (CS), to activate another industry by-product, ground granulated blastfurnace slag (GGBS), for soft clay stabilization in comparison to Portland cement (PC). The properties of CS–GGBS stabilized clays were investigated through unconfined compressive strength (UCS) test, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results indicated that the optimum CS content for the CS–GGBS stabilized clay to yield the highest UCS was 4%–6%, varying slightly with curing age and GGBS content. The UCS of the optimum CS-GGBS stabilized clays was more than twice that of the corresponding PC stabilized clays. The main hydration products detected for the CS–GGBS stabilized clays included calcium silicate hydrates (CSH), calcium aluminate hydrates (CAH), and alumino-ferrite monosulfate (AFm).

Effect of Metakaolin Sand on Properties of Cement Composites

2014 ◽  
Vol 897 ◽  
pp. 176-179
Author(s):  
Ľudovít Krajči ◽  
Ivan Janotka ◽  
Marta Kuliffayova ◽  
Peter Uhlik
Keyword(s):  
Portland Cement ◽  
Mercury Intrusion Porosimetry ◽  
Structure Refinement ◽  
Hydrate Formation ◽  
Raw Material ◽  
Cement Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Positive Effect

The Slovak natural raw material kaolin sand containing 36 wt.% of kaolinite from Vyšný Petrovec deposit was thermally transformed at 650 °C for 1 hour to the metakaolin sand with relevant content of metakaolinite. Behaviour of cement composites having replacement of Portland cement with metakaolin sand including 0; 5; 10 and 15 wt.% of metakaolinite and water to solids ratio of 0.5 cured in water for 28 days and 90 days was studied by thermal analysis, X-ray diffraction analysis and mercury intrusion porosimetry analysis. The study concerned calciumsilica hydrate and calcium aluminate hydrate formation, portlandite dehydroxylation and calcite decarbonation. The influence of curing time and metakaolinite content were estimated. The replacement of Portland cement by metakaolin sand led to positive effect on relevant compressive strengths. The changes in microstructure involved especially reduction in portlandite content and pore structure refinement.

Microstructural and Microanalytical Study on Cementitious Materials Subjected to the Cyclic Sulfate Environment

2014 ◽  
Vol 898 ◽  
pp. 371-374
Author(s):  
Xiao Lu Yuan
Keyword(s):  
Electron Microscope ◽  
Mercury Intrusion Porosimetry ◽  
Cementitious Materials ◽  
Sulfate Attack ◽  
Microstructural Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Lower Porosity ◽  
Scanning Electron

Microstructural properties have been studied in cementitious materials, which were subjected to cyclic sulfate exposure, through x-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and mercury intrusion porosimetry (MIP). Results indicate that portlandite in OPC concrete and OPC-FA concrete is mainly converted to gypsum. Portlandite in OPC-GBFS concrete is mainly converted to gypsum and ettringite. Concrete subjected to the cyclic sulfate attack has a lower porosity and the higher amount of macro-pores than that before exposure. Concretes incorporating FA or GBFS had lower porosity and higher amount of micro-pores than OPC concrete.

scholarly journals Strength and Volume Change Characteristics of Clayey Soils: Performance Evaluation of Enzymes

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 52
Author(s):  
Tanveer Ahmed Khan ◽  
Mohd Raihan Taha ◽  
Mudasser Muneer Khan ◽  
Syyed Adnan Raheel Shah ◽  
Muhammad Asif Aslam ◽  
...  
Keyword(s):  
Volume Change ◽  
Unconfined Compressive Strength ◽  
Optimum Moisture Content ◽  
Soil Samples ◽  
Residual Soil ◽  
Clayey Soils ◽  
X Ray Diffraction ◽  
Treated Soil ◽  
X Ray ◽  
Change Characteristics

This study was conducted to evaluate the strength and volume change characteristics of a sedimentary residual soil mixed with bentonite (S1) when treated with three different enzymes. In addition, three reference clays including bentonite, illite, and kaolinite were also treated with enzymes to study the effect on their strength characteristics. Soil samples prepared at the optimum moisture content (OMC) were sealed and cured for four months. After curing, reference clays were tested for unconfined compressive strength (UCS). For swell tests, the S1 soil samples were placed on porous stones, which were immersed in water to allow capillary soaking of the samples. S1 samples were allowed to dry at ambient temperature for shrinkage test until the rate of reduction in volume became negligible. On completion of swell tests, the samples were tested for UCS to determine the decrease in strength due to saturation. No increase in strength and decrease in volume change were observed for any of the enzymes and dosages. Field Emission Scanning Electron Microscope (FESEM) showed some dense packing of particles for treated samples, whereas X-ray diffraction (XRD) did not reveal any change; in fact, the pattern for untreated and treated soil samples were indistinguishable.

scholarly journals Utilization of Municipal Solid Waste Incineration Bottom Ash as Fine Aggregate of Cement Mortars

2021 ◽  
Vol 13 (16) ◽  
pp. 8832
Author(s):  
Byeong-Hun Woo ◽  
In-Kyu Jeon ◽  
Dong-Ho Yoo ◽  
Seong-Soo Kim ◽  
Jeong-Bae Lee ◽  
...  
Keyword(s):  
Solid Waste ◽  
Mercury Intrusion Porosimetry ◽  
Bottom Ash ◽  
Fine Aggregate ◽  
Cement Composites ◽  
Backscatter Electron ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Scanning Electron

Incineration bottom ash is generated by the incineration of solid waste. Household solid waste is increasing every year and so is incineration bottom ash. This is a problem to treat the incineration bottom ash because the ash has many toxic components. Cement composites can solve this problem and there are many studies for using the bottom ash as fine aggregate. To evaluate the usage of incineration bottom ash, compressive strength, mercury intrusion porosimetry, scanning electron microscopy-backscatter electron, X-ray diffraction, and toxicity characteristic leaching processes were performed. When using incineration bottom ash up to 20% of substitution, the compressive strength in all cases was increased. This study showed how the filler effect appeared well in the cement composites through the scanning electron microscopy-backscatter electron, and mercury intrusion porosimetry. X-ray diffraction indicated the possibility of an alkali-silica reaction of the aggregate with the components of incineration bottom ash. This problem is an obstacle to applying the incineration bottom ash as a fine aggregate. In addition, the toxicity characteristic leaching process was shown to be under the threshold of the Korean standard, however, this should nuanced by the consideration of amorphity. Comprehensively, incineration bottom ash could be used as a fine aggregate of up to 20% of substitution. However, the pre-treatment would need to eliminate or reduce alkali reactive components and heavy metals.

Physical and Chemical State of the Concrete Piers of the Former Franz Joseph Bridge Built in 1891

2016 ◽  
Vol 691 ◽  
pp. 297-308
Author(s):  
Ivan Janotka ◽  
Peter Paulík ◽  
Patrik Ševčík ◽  
Michal Bačuvčík
Keyword(s):  
Mercury Intrusion Porosimetry ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Elasticity Module ◽  
European Standards ◽  
Physical And Chemical ◽  
And Chemical Properties

This article discusses the properties of concrete within the piers of the Old Bridge in Bratislava (former Franz Joseph Bridge). It was the first permanent bridge across the river Danube in Bratislava as well as within the present territory of Slovakia. Mechanical, physical and chemical properties were verified on core drills, some of them being almost 23 m long. The concretes were tested for dynamic and Young’s elasticity module and compressive strengths. Subsequently the fines of concrete specimens were studied by the X-ray diffraction, TG-DTA and mercury intrusion porosimetry techniques and also by chemical analyses and SEM observations. The piers were made from 5 different concrete kinds. The concrete in the caissons and in the piers does not fulfil the criteria for structural concrete defined in the present European standards. This finding seriously suggests that carrying capacity of the piers after the reconstruction of the bridge, without any strengthening would become questionable.

scholarly journals Influences of Ultrafine Slag Slurry Prepared by Wet Ball Milling on the Properties of Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Yubo Li ◽  
Shaobin Dai ◽  
Xingyang He ◽  
Ying Su
Keyword(s):  
Environmental Sustainability ◽  
Blast Furnace Slag ◽  
Ball Mill ◽  
High Performance ◽  
Mercury Intrusion Porosimetry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mercury Intrusion ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

The application of ultrafine ground-granulated blast-furnace slag (GGBFS) in concrete becomes widely used for high performance and environmental sustainability. The form of ultrafine slag (UFS) used in concrete is powder for convenience of transport and store. Drying-grinding-drying processes are needed before the application for wet emission. This paper aims at exploring the performances of concrete blended with GGBFS in form of slurry. The ultrafine slag slurry (UFSS) was obtained by the process of grinding the original slag in a wet ball mill, which was mixed in concrete directly. The durations of grinding were 20 min, 40 min, and 60 min which were used to replace Portland cement with different percentages, namely, 20, 35, and 50, and were designed to compare cement with original slag concrete. The workability was investigated in terms of fluidity. Microstructure and pore structure were evaluated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP). The fluidity of concrete mixed with UFSS is deteriorated slightly. The microstructure and early strength were obviously improved with the grind duration extended.

Effect of Curing Time on the Pore Structure of the Portland Cement Concrete

2010 ◽  
Vol 44-47 ◽  
pp. 2592-2596
Author(s):  
Wei Lun Wang ◽  
Peng Liu
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Pore Structure ◽  
Mercury Intrusion Porosimetry ◽  
Curing Time ◽  
Hydration Products ◽  
Portland Cement Concrete ◽  
X Ray Diffraction ◽  
Cement Concrete ◽  
X Ray

In this paper, the influence of curing time on the compressive strength and pore structure of the Portland cement concrete was investigated. The phase composition and morphology of hydration products of Portland cement were analyzed with X-ray diffraction (XRD). In addition, the porosity and pore distribution of the concrete were also researched using mercury intrusion porosimetry (MIP), surface area and porosity analyzer (BET). The results show that the influence of curing time on the compressive strength and pore structure of the concrete is obvious. With curing time increasing, the compressive strength of the concrete increased and the porosity decreased. The corresponding fractal dimension of the pore and the microstructure were changed, as well. With time increasing, more hydration products were produced.

Sign in / Sign up

Export Citation Format

Share Document