scholarly journals Veterinary and sanitary examination of yak slaughter products in case of invasive diseases in the conditions of the Primorsky Territory

2020 ◽  
Vol 203 ◽  
pp. 01031
Author(s):  
Dmitrii Zamaratskii ◽  
Margarita Simakova ◽  
Guli Koltun ◽  
Viktoriia Podvalova
Keyword(s):  
New Species ◽  
Raw Materials ◽  
Meat Products ◽  
Meat Production ◽  
Parasitic Diseases ◽  
High Quality ◽  
Invasive Diseases ◽  
The Cost ◽  
By Products

Primorsky Territory is a platform for the intensification of the livestock industry in order to provide the population with high-quality meat products. However, the introduction of new species of animals (yaks, camels, highly productive breeds of cattle) to the territory of the region contributes to the emergence and spread of invasions among them. Fascioliasis, dictyocaulosis, piroplasmidosis are natural focal parasitic diseases of animals that are widespread in the Primorsky Territory. They are detected almost every day during the veterinary and sanitary examination of animal slaughter products. Despite the absence of a threat of infection with these diseases for humans through meat and by-products, there remains a risk of deterioration in the quality of such products and the development of defects in meat raw materials, which leads to the impossibility of further sale and consumption. Yaks were brought to the Primorsky Territory in 2010 as an experiment, and in 2015, farmers actively used these animals as beef cattle, since their simplicity in keeping significantly reduced the cost of the meat production process. The conditions of keeping yaks in the Primorsky Territory contributed to their infection with parasitic diseases, the extent of the invasion of which reached 60% and more.

Оrganic Meat Production of Broiler Chickens Hubbard Redbro Cross

2020 ◽  
Keyword(s):  
Broiler Chickens ◽  
Raw Materials ◽  
Animal Health ◽  
Meat Products ◽  
Poultry Meat ◽  
Meat Production ◽  
Significant Difference ◽  
Environmentally Safe ◽  
The Impact

This article presents the results of studying the impact of housing and feeding conditions on broiler chickens of Hubbard RedBro cross, as well as the quality of products obtained when using floor and cage content, in a farm. It established that when receiving a mixed feed of own production using feed raw materials grown on a farm without the use of pesticides, a statistically significant decrease in potentially dangerous substances for animal health is recorded. Compared with factory feed, it has reduced the content of pesticides by 14 times, and mercury and arsenic by 24 times, cadmium by five times, and lead by ten times. The results of the study of economic indicators of growing Hubbard RedBro cross broiler chickens, as well as the chemical composition and quality of carcasses, indicated that there was no significant difference between the floor and cell conditions of keeping. Still, the use of a diet based on eco-feeds contributed to a statistically significant decrease in the concentration of toxic metals in the muscles of the poultry of the experimental groups. As a result, it found that the use of the studied compound feed in the diets of broiler chickens increased the indicators of Biosafety and ensured the production of environmentally safe ("organic") poultry meat products.

scholarly journals Оrganic Meat Production of Broiler Chickens Hubbard Redbro Cross

2021 ◽  
Vol 10 (1) ◽  
pp. 25-30
Keyword(s):  
Broiler Chickens ◽  
Raw Materials ◽  
Animal Health ◽  
Meat Products ◽  
Poultry Meat ◽  
Meat Production ◽  
Significant Difference ◽  
Environmentally Safe ◽  
The Impact

This article presents the results of studying the impact of housing and feeding conditions on broiler chickens of Hubbard RedBro cross, as well as the quality of products obtained when using floor and cage content, in a farm. It established that when receiving a mixed feed of own production using feed raw materials grown on a farm without the use of pesticides, a statistically significant decrease in potentially dangerous substances for animal health is recorded. Compared with factory feed, it has reduced the content of pesticides by 14 times, and mercury and arsenic by 24 times, cadmium by five times, and lead by ten times. The results of the study of economic indicators of growing Hubbard RedBro cross broiler chickens, as well as the chemical composition and quality of carcasses, indicated that there was no significant difference between the floor and cell conditions of keeping. Still, the use of a diet based on eco-feeds contributed to a statistically significant decrease in the concentration of toxic metals in the muscles of the poultry of the experimental groups. As a result, it found that the use of the studied compound feed in the diets of broiler chickens increased the indicators of Biosafety and ensured the production of environmentally safe ("organic") poultry meat products.

CHINESE MEAT GOAT BREEDS AND THEIR CROSSES

1995 ◽  
Vol 15 ◽  
pp. 63-73 ◽  
Author(s):  
Jian Ying
Keyword(s):  
Meat Products ◽  
Meat Production ◽  
Natural Environments ◽  
High Quality ◽  
Self Sufficiency ◽  
Meat Goat ◽  
Sheep Production ◽  
Agricultural Regions ◽  
Selection Of

SUMMARYSelection of meat goat breeds and crossing for meat production provides food a nd is a source of self sufficiency for man. The following four goat breeds are examples of meat production of, Manjiang yellow, Matou, Longling and Hual goat breeds. Recently, it was reported that the quantity of meat output was increased and quality of meat was improved of the local goats in some areas by crossing with Nanjing, Matou and Longling. The Huai breed is a very important breed for producing high quality meat and hides' It is also -noted for its high prolificacy. The natural environments of China are well suited for goat production. Most of its harsher environments can be utilized efficiently only by goats. Especially southern agricultural region and northern agricultural regions develop and use the meat goat breeds as genetic resources for adaptation and production of unique and economically important meat products, and as a complement to cattle or sheep production.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Ukraine’s foreign trade in meat and meat products: trends and geographical aspects

2020 ◽  
pp. 48-52
Author(s):  
Olena Lyakhovska
Keyword(s):  
Small Businesses ◽  
Structural Changes ◽  
Raw Materials ◽  
Meat Products ◽  
World Market ◽  
Poultry Meat ◽  
Positive Development ◽  
Meat Production ◽  
Meat Industry ◽  
Geographical Structure

Current trends in meat and meat products exports are considered. The dynamics and structural changes in meat exports by types and degree of processing (beef and veal, pork, poultry, finished meat products) are analyzed. The paper proves that in recent years, only meat and edible poultry by-products have taken a competitive position in the world market. Accordingly, the dynamics of exports of this type of meat is positive, and the share of these products in the structure of exported meat is the largest (86.09%). Possible threats to the growth of import dependence on certain types of meat products, in particular, chilled and frozen beef and veal, pork, are indicated. The rating of the largest countries-importers of meat and meat products (by types) from Ukraine is built, their share in the structure of meat exports is determined. Changes in the geographical structure of exports have been studied, which indicate a low level of diversification of the geography of exports of certain types of meat (pork, beef). At the same time, a positive development of the geographical structure of poultry meat exports (exported to more than 100 countries) was revealed. Problems of the export potential development in the meat industry of Ukraine are revealed. In particular, the problems of livestock development (outdated technologies and production techniques that reduce the efficiency and productivity; inefficiency of the organization of purchase and processing of meat, which leads to reduced breeding in small businesses and households; inefficiency of state incentives, etc.) and industrial meat production (lack of raw materials, obsolescence of fixed assets and production technologies, poorly developed logistics, etc.). The solution of these problems requires: a systematic approach, which will encourage the cooperation of agricultural and industrial production, cooperation with importers of meat products and protection of domestic producers in the domestic and international markets, creating a favorable investment and information environment that will promote the meat industry development.

scholarly journals Stated Preferences for Plant-Based and Cultured Meat: A Choice Experiment Study of Spanish Consumers

2021 ◽  
Vol 13 (15) ◽  
pp. 8235
Author(s):  
Alfredo J. Escribano ◽  
Maria Belen Peña ◽  
Carlos Díaz-Caro ◽  
Ahmed Elghannam ◽  
Eva Crespo-Cebada ◽  
...  
Keyword(s):  
Choice Experiment ◽  
Meat Products ◽  
Meat Production ◽  
Experiment Study ◽  
Negative Effects ◽  
High Quality ◽  
Cultured Meat ◽  
Production And Consumption ◽  
Alternative Sources ◽  
Negative Impacts

Meat production and consumption have been claimed to have negative impacts on the environment, and even on the consumer’s health. In this sense, alternative sources of protein, mainly meat substitutes and cultured meat, have emerged due to those perceived negative effects. Our paper carries out a choice experiment to analyze the preferences of 444 Spanish consumers and their willingness to pay for plant-based and cultured meats, as compared to conventional meat. Spain was considered of interest for this study due to its significant gastronomic culture, with high-quality meat products that make a great contribution to the economy, meaning that this could be a suitable and also challenging market in which to test alternative sources of protein. The findings show that consumers’ motivations and their interactions with these products are complex. Additionally, a cluster analysis allowed us to identify three types of consumers in terms of preference for these products: price-sensitive millennials, conscious/concerned consumers, and indifferent consumers. Only one group showed some level of acceptance of these alternative products meats.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

Effect of Physico-chemical Characteristics of Raw Muscles from Three Iberian × Duroc Genotypes on Dry-cured Meat Products Quality

2007 ◽  
Vol 13 (6) ◽  
pp. 485-495 ◽  
Author(s):  
M.R. Ramirez ◽  
R. Cava
Keyword(s):  
Sensory Quality ◽  
Meat Products ◽  
Biceps Femoris ◽  
Raw Material ◽  
Meat Production ◽  
Reciprocal Crosses ◽  
Physico Chemical ◽  
Cured Meat ◽  
The Difference

The effect of raw material characteristics (longissimus dorsi and biceps femoris) on dry-cured loin and ham quality from three different Iberian · Duroc genotypes was studied: GEN1: ♂ Iberian · ♀ Duroc1, GEN2: ♂ Duroc1 · ♀ Iberian; GEN3: ♂ Duroc2 · ♀ Iberian. GEN1 and GEN2 are reciprocal crosses, while the difference between GEN2 and GEN3 is the Duroc sire line. The line Duroc1 (DU1) was selected for the manufacture of dry-cured meat products, whereas the line Duroc2 (DU2) was selected for meat production with low carcass fat. Raw material and dry-cured meat products did not differ between reciprocal crosses (GEN1 vs. GEN2). However, the genotype of the Duroc sire line affected the quality of meat and dry-cured meat products. GEN1 and GEN2 had higher adipogenic nature and higher postmortem pH than GEN3, and as a result, these dry-cured meat products had better instrumental and sensory quality than those from GEN3. By contrast, meat from GEN3 had lower pH, fat content, and oxidative stability which decreased the quality of dry-cured meat products. Therefore, there was a close connection between raw material and dry-cured meat products quality as it was affected by characteristics related to the genotype such as the adipogenic character and meat quality traits associated with pH.

scholarly journals The Effectiveness of the Quality of Performance Using the Cost Accounting Information System in the Control of Quality Costs Study in the General Company for Electrical Industries

2019 ◽  
Vol 27 (2) ◽  
pp. 115-132
Author(s):  
Hanan Abdullah Hassan Al-Amar ◽  
Qasim Ali Omran Al-Bayati ◽  
Huda Jabbar Kadhum Al-Haiyali
Keyword(s):  
Information Systems ◽  
Raw Materials ◽  
Accounting Information ◽  
Cost Accounting ◽  
Technical Standards ◽  
Accounting Systems ◽  
Accounting Information Systems ◽  
Quality Costs ◽  
The Cost

The financial operations which carried out by economic unity are proven treatment and documenting and continuous down to makers decision by relevance objective and time and then to reflect on the decision maker in any center of responsibility. That ’s provided by the system accounting information where the source is the basis for producing important accounting information, And the cost accounting information systems of the most important information systems that deal with data processing and conversion to information of relative importance to the beneficiaries. Which is consist with The objective of the research that emphasize the importance of accounting systems in general and systems cost in particular to achieve the highest c The research has led to a number of results, the most important of which is the difficulty in controlling quality costs as well as the waste of economic resources in the company. The researchers recommended adherence to the technical standards to achieve the quality of performance as well as conducting a thorough examination of samples and focusing on the quality of raw materials and testing before use to reduce the proportion Damage.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

Sign in / Sign up

Export Citation Format

Share Document