Anatomical characteristics and tissue localization of various flavonoid subclasses in Cotinus coggygria stem and leaf cross-sections

Planta Medica ◽  
2015 ◽  
Vol 81 (16) ◽  
Author(s):  
DS Antal ◽  
F Ardelean ◽  
F Andrica ◽  
C Danciu ◽  
S Avram
Keyword(s):  
Cross Sections ◽  
Tissue Localization ◽  
Anatomical Characteristics ◽  
Cotinus Coggygria

scholarly journals Effect of heavy metals on stem anatomical characteristics of Trapa natans L. from Skadar Lake (Montenegro)

2021 ◽  
Vol 37 ◽  
pp. e37083
Author(s):  
Dragana Petrović ◽  
Slađana Krivokapić ◽  
Goran Anačkov ◽  
Jadranka Luković
Keyword(s):  
Heavy Metals ◽  
Cross Sections ◽  
Significant Negative Correlation ◽  
Cross Sectional ◽  
Minimum Concentration ◽  
Anatomical Characteristics ◽  
Trapa Natans ◽  
Cell Layers ◽  
Mn Content ◽  
Anatomical Parameters

This study aimed to analyze stem anatomical characteristics of Trapa natans from five Skadar Lake locations (L1 - Milovića bay, L2 – inflow of the Morača river, L3 - Kamenik, L4 - Grmožur, L5 - Lipovik) with different concentrations of Cu, Mn, Zn, Co and Pb, during the summer period of the year 2012. Cross sections of stem were made using cryotechnic procedure. For all analyzed quantitative anatomical parameters, the minimum values at the location L2 were recorded, with the presence of maximum content for all investigated metals in stem of Trapa natans. On the other hand, except for cobalt, at the location L4 the minimum concentration for all investigated metals were recorded. Plants collected from this location have the largest average values of the most measured anatomical parameters. The results of Discriminant Analysis showed that plants from different location could be clearly classified into three groups according to their stem quantitative anatomical characteristics which corresponds with heavy metals content. Our research also showed that there is no statistically significant correlation between the content of most investigated metals (Co, Cu, Pb and Zn) and the values of anatomical parameters. Statistically significant negative correlation was found between Mn content in stem and values of two anatomical characters (stem cross-sectional area and Mn content, r = - 0.88; p < 0.05; number of hypodermal cell layers and Mn content, r = - 0.90; p < 0.05).  

scholarly journals Anatomical characteristics of two Ornithogalum L. (Hyacinthaceae) taxa from Serbia and Hungary and their taxonomic implication

2016 ◽  
Vol 75 (1) ◽  
pp. 67-73 ◽  
Author(s):  
Andrijana M. Andrić ◽  
Milica M. Rat ◽  
Lana N. Zorić ◽  
Jadranka Ž. Luković
Keyword(s):  
Light Microscopy ◽  
Cross Sections ◽  
Taxonomic Significance ◽  
Genetic Analyses ◽  
Anatomical Features ◽  
Anatomical Characteristics ◽  
Qualitative And Quantitative ◽  
Taxonomic Implication ◽  
Anatomical Characters ◽  
Anatomical Parameters

Abstract Anatomical characters of two morphologically similar Ornithogalum taxa, O. umbellatum and O. divergens, were investigated. An analysis of leaf and scapus cross-sections was performed on plants from ten populations from Serbia and Hungary, using light microscopy. The aim of this research was to give data about the qualitative and quantitative anatomical characteristics of these taxa, in order to evaluate their taxonomic significance and single out distinctive anatomical features, as well as to contribute to the knowledge of the genus Ornithogalum in the studied region. On the basis of the variability of anatomical characters, similar populations formed two clusters, joining the plants previously determined as O. divergens and O. umbellatum. The two taxa significantly differed for most of the quantitative leaf and scapus characters. Since only quantitative differences were recorded in this research, anatomical characters could not be solely used to separate these two taxa. However, the results of anatomical investigations are consistent with the results of previous morphological and genetic analyses; therefore anatomical parameters could be useful as additional taxonomic characters.

scholarly journals AN ENDEMIC PLANT GROWING IN KAZDAĞI IMPORTANCE AND USAGE AREAS OF Euphorbia anacampseros Boiss. var. anacampseros TAXON

2020 ◽  
Vol 4 (4) ◽  
pp. 281-288
Author(s):  
Gizem TUTGUN ◽  
Ahmet GÖNÜZ
Keyword(s):  
Cross Sections ◽  
National Park ◽  
Morphological Characteristics ◽  
Endemic Plant ◽  
Anatomical Features ◽  
Anatomical Characteristics

Morphological and anatomical characteristics of Euphorbia anacampseros Boiss. var. anacampseros taxa which is an endemic member of Euphorbiaceae family were investigated. Morphological characteristics and dimentions of these specimens were collected from Kazdagı National Park. Anatomical features (like cross-sections of the root and stem, cross and superficial sections of the leaf) of taxon were investigated.

Analysis of STEM micrographs of thick objects

1978 ◽  
Vol 36 (2) ◽  
pp. 106-107
Author(s):  
S. Golladay
Keyword(s):  
Inelastic Scattering ◽  
Multiple Scattering ◽  
Mass Distribution ◽  
Cross Sections ◽  
Phase Contrast ◽  
Image Point ◽  
Contrast Effects ◽  
Total Cross Sections ◽  
Elastic And Inelastic Scattering

The theory of multiple scattering has been worked out by Groves and comparisons have been made between predicted and observed signals for thick specimens observed in a STEM under conditions where phase contrast effects are unimportant. Independent measurements of the collection efficiencies of the two STEM detectors, calculations of the ratio σe/σi = R, where σe, σi are the total cross sections for elastic and inelastic scattering respectively, and a model of the unknown mass distribution are needed for these comparisons. In this paper an extension of this work will be described which allows the determination of the required efficiencies, R, and the unknown mass distribution from the data without additional measurements or models. Essential to the analysis is the fact that in a STEM two or more signal measurements can be made simultaneously at each image point.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

An Analysis of Dissociation of Molecules in a High Resolution Electron Microscope

1973 ◽  
Vol 31 ◽  
pp. 486-487
Author(s):  
Mihir Parikh
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Cross Sections ◽  
Resolving Power ◽  
Peak Intensity ◽  
Molecular Film ◽  
Resolution Electron ◽  
Dissociation Cross Section ◽  
High Resolution Electron Microscope ◽  
The Stability

It is well known that the resolution of bio-molecules in a high resolution electron microscope depends not just on the physical resolving power of the instrument, but also on the stability of these molecules under the electron beam. Experimentally, the damage to the bio-molecules is commo ly monitored by the decrease in the intensity of the diffraction pattern, or more quantitatively by the decrease in the peaks of an energy loss spectrum. In the latter case the exposure, EC, to decrease the peak intensity from IO to I’O can be related to the molecular dissociation cross-section, σD, by EC = ℓn(IO /I’O) /ℓD. Qu ntitative data on damage cross-sections are just being reported, However, the microscopist needs to know the explicit dependence of damage on: (1) the molecular properties, (2) the density and characteristics of the molecular film and that of the support film, if any, (3) the temperature of the molecular film and (4) certain characteristics of the electron microscope used

Surface ultrastructure of danazol treated rat endometrium: A SEM study

1983 ◽  
Vol 41 ◽  
pp. 556-557
Author(s):  
R.P. Apkarian ◽  
J.S. Sanfilippo
Keyword(s):  
Cross Sections ◽  
Reproductive Tract ◽  
Preliminary Investigation ◽  
Breast Disease ◽  
Distal Segment ◽  
Uterine Horn ◽  
Female Reproductive Tract ◽  
Ultrastructural Changes ◽  
Cycle Phase ◽  
Sprague Dawley

The synthetic androgen danazol, is an isoxazol derivative of ethisterone. It is utilized in the treatment of endometriosis, fibrocystic breast disease, and has a potential use as a contraceptive. A study was designed to evaluate the ultrastructural changes associated with danazol therapy in a rat model. The preliminary investigation of the distal segment of the rat uterine horn was undertaken as part of a larger study intended to elucidate the effects of danazol on the female reproductive tract.Cross-sections (2-3 mm in length) of the distal segment of the uterine horn from sixteen Sprague-Dawley rats were prepared for SEM. Ten rats in estrus served as controls and six danazol treated rats were noted to have alterations of the estrus cycle i.e. a lag in cycle phase or noncycling patterns. Specimens were fixed in 3% glutaraldehyde in 0.05M phosphate buffer containing CaCl2 at pH 7.0-7.4 and chilled to 4°C. After a brief wash in distilled water, specimens were passed through a graded series of ethanol, critical point dryed in CO2 from absolute ethanol, and coated with 6nm Au. Observations were made with an IS1-40 SEM operated at 15kV.

Electron Irradiation Effects in Polyoxymethylene Crystals Grown Inside Trioxane Crystals

1971 ◽  
Vol 29 ◽  
pp. 78-79
Author(s):  
J. P. Colson ◽  
D. H. Reneker
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Detailed Examination ◽  
The Other ◽  
Electron Micrograph ◽  
Irradiation Effects ◽  
Threefold Axis ◽  
Typical Sample ◽  
Polymer Crystals ◽  
Chain Axis

Polyoxymethylene (POM) crystals grow inside trioxane crystals which have been irradiated and heated to a temperature slightly below their melting point. Figure 1 shows a low magnification electron micrograph of a group of such POM crystals. Detailed examination at higher magnification showed that three distinct types of POM crystals grew in a typical sample. The three types of POM crystals were distinguished by the direction that the polymer chain axis in each crystal made with respect to the threefold axis of the trioxane crystal. These polyoxymethylene crystals were described previously.At low magnifications the three types of polymer crystals appeared as slender rods. One type had a hexagonal cross section and the other two types had rectangular cross sections, that is, they were ribbonlike.

A quantitative approach to inner shell losses

1978 ◽  
Vol 36 (1) ◽  
pp. 526-527 ◽  
Author(s):  
R.D. Leapman ◽  
P. Rez ◽  
D.F. Mayers
Keyword(s):  
Energy Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Accurate Determination ◽  
Background Intensity ◽  
Core Excitation ◽  
Quantitative Basis ◽  
Cross Section Differential ◽  
Bound Electrons

Microanalysis by EELS has been developing rapidly and though the general form of the spectrum is now understood there is a need to put the technique on a more quantitative basis (1,2). Certain aspects important for microanalysis include: (i) accurate determination of the partial cross sections, σx(α,ΔE) for core excitation when scattering lies inside collection angle a and energy range ΔE above the edge, (ii) behavior of the background intensity due to excitation of less strongly bound electrons, necessary for extrapolation beneath the signal of interest, (iii) departures from the simple hydrogenic K-edge seen in L and M losses, effecting σx and complicating microanalysis. Such problems might be approached empirically but here we describe how computation can elucidate the spectrum shape.The inelastic cross section differential with respect to energy transfer E and momentum transfer q for electrons of energy E0 and velocity v can be written as

Oxygen K near edge structures studied with multiple scattering calculations

1988 ◽  
Vol 46 ◽  
pp. 504-505
Author(s):  
Xudong Weng ◽  
Peter Rez
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Partial Cross Section ◽  
Energy Window ◽  
Edge Structure ◽  
Fine Structures ◽  
Hydrogenic Model ◽  
Electron Energy Loss ◽  
Quantitative Chemical

In electron energy loss spectroscopy, quantitative chemical microanalysis is performed by comparison of the intensity under a specific inner shell edge with the corresponding partial cross section. There are two commonly used models for calculations of atomic partial cross sections, the hydrogenic model and the Hartree-Slater model. Partial cross sections could also be measured from standards of known compositions. These partial cross sections are complicated by variations in the edge shapes, such as the near edge structure (ELNES) and extended fine structures (ELEXFS). The role of these solid state effects in the partial cross sections, and the transferability of the partial cross sections from material to material, has yet to be fully explored. In this work, we consider the oxygen K edge in several oxides as oxygen is present in many materials. Since the energy window of interest is in the range of 20-100 eV, we limit ourselves to the near edge structures.

Sign in / Sign up

Export Citation Format

Share Document