scholarly journals A New Form of Intraoral Delivery of Antifungal Drugs for the Treatment of Denture-Induced Oral Candidosis

2009 ◽  
Vol 03 (04) ◽  
pp. 257-266 ◽  
Author(s):  
Wala M. Amin ◽  
Muna H. Al-Ali ◽  
Nesreen A. Salim ◽  
Sandra K. Al-Tarawneh
Keyword(s):  
Candida Albicans ◽  
Methyl Methacrylate ◽  
Fungal Infections ◽  
Ultra Violet ◽  
Antifungal Drugs ◽  
Distilled Water ◽  
Clinical Value ◽  
Sustained Drug Release ◽  
Poly Methyl Methacrylate ◽  
Pmma Resin

ABSTRACTObjectives: To monitor the release of the antifungal drugs Fluconazole, Chlorhexidine and a combination of the two from an auto-polymerized poly (methyl methacrylate) (PMMA) denture base resin; and to investigate the effect of the released drugs upon the growth of Candida albicans.Methods: A high performance liquid chromatography-Ultra violet (HPLC-UV) method was used in the analysis of the released drugs into distilled water from PMMA discs doped with the antifungal drugs Fluconazole (10%), Chlorhexidine (10%) and a combination of the two drugs (5% each). The antifungal efficacy of the released drugs was monitored, microbiologically, employing “well” technique on a Saborauds culture medium inoculated with a resistant strain of Candida albicans.Results: It was shown that Fluconazole, Chlorhexidine and the combination of the two drugs can be successfully incorporated with PMMA. It was found that the drugs leach steadily out of the PMMA resin into distilled water at mouth temperature and that sustained drug release continued throughout the 28 days test period. It was also shown that the released drugs demonstrated an antifungal activity against the resistant Candida albicans and this was most remarkable in the combined drugs samples.Conclusions: The findings of this investigation have a clinical value in terms of their significant contribution to the treatment of fungal infections of the oral cavity. The sustained release of antifungal drugs from the PMMA resin clearly constitutes a new dosage form of these drugs via the poly (methyl methacrylate) delivery system. (Eur J Dent 2009;3:257-266)

Detection and Estimation of Monomeric Eluates from Poly(Methyl Methacrylate) Resin of Various Polymerisation Modes

2007 ◽  
Vol 15 (7) ◽  
pp. 553-560
Author(s):  
Wala M. Amin
Keyword(s):  
Methyl Methacrylate ◽  
High Performance ◽  
Soft Tissues ◽  
Artificial Saliva ◽  
Ultra Violet ◽  
Distilled Water ◽  
Elution Profile ◽  
Poly Methyl Methacrylate ◽  
Methacrylate Monomer ◽  
Methyl Methacrylate Monomer

High-performance liquid chromatography coupled to an ultra-violet detector method was used to monitor the elution profile of methyl methacrylate monomer from poly (methyl methacrylate) resin produced by various polymerization modes. Three types of polymer were investigated, one auto-polymerised, one heat-polymerised, and a microwave-polymerised resin type. The study was conducted on five discs from each type in both distilled water and artificial saliva. The results showed that the three resins demonstrated a rapid dumping of their residual methacrylic acid whereas their un-polymerised methyl methacrylate monomer continued to leach out to both artificial saliva and distilled water throughout the five-week test period. It was shown that the three resins differed significantly (p< 0.05) in the elution profile of their methyl methacrylate, with the microwave-polymerised type showing the highest amount of leached out monomer whereas the heat-polymerised type showed the lowest amount of monomer diffusion. The results also showed that the amount of eluates leached out from the investigated polymers into the artificial saliva was larger than into water. The findings of this study warned that the risk of a chemical trauma to the oral soft tissues is significant and imminent immediately after delivery of a newly constructed prosthesis. Such a trauma, however, could be substantially minimised by immersing the oral appliances in water for one week before insertion.

Efficacy of Novel Schiff base Derivatives as Antifungal Compounds in Combination with Approved Drugs Against Candida Albicans

2019 ◽  
Vol 15 (6) ◽  
pp. 648-658 ◽  
Author(s):  
Manzoor Ahmad Malik ◽  
Shabir Ahmad Lone ◽  
Parveez Gull ◽  
Ovas Ahmad Dar ◽  
Mohmmad Younus Wani ◽  
...  
Keyword(s):  
Schiff Base ◽  
Candida Albicans ◽  
Antifungal Activity ◽  
Fungal Infections ◽  
Total Sterol ◽  
Antifungal Drugs ◽  
New Drugs ◽  
Ergosterol Biosynthesis ◽  
Dependent Manner ◽  
Schiff Base Derivatives

Background: The increasing incidence of fungal infections, especially caused by Candida albicans, and their increasing drug resistance has drastically increased in recent years. Therefore, not only new drugs but also alternative treatment strategies are promptly required. Methods: We previously reported on the synergistic interaction of some azole and non-azole compounds with fluconazole for combination antifungal therapy. In this study, we synthesized some non-azole Schiff-base derivatives and evaluated their antifungal activity profile alone and in combination with the most commonly used antifungal drugs- fluconazole (FLC) and amphotericin B (AmB) against four drug susceptible, three FLC resistant and three AmB resistant clinically isolated Candida albicans strains. To further analyze the mechanism of antifungal action of these compounds, we quantified total sterol contents in FLC-susceptible and resistant C. albicans isolates. Results: A pyrimidine ring-containing derivative SB5 showed the most potent antifungal activity against all the tested strains. After combining these compounds with FLC and AmB, 76% combinations were either synergistic or additive while as the rest of the combinations were indifferent. Interestingly, none of the combinations was antagonistic, either with FLC or AmB. Results interpreted from fractional inhibitory concentration index (FICI) and isobolograms revealed 4-10-fold reduction in MIC values for synergistic combinations. These compounds also inhibit ergosterol biosynthesis in a concentration-dependent manner, supported by the results from docking studies. Conclusion: The results of the studies conducted advocate the potential of these compounds as new antifungal drugs. However, further studies are required to understand the other mechanisms and in vivo efficacy and toxicity of these compounds.

scholarly journals Design of peptides with strong binding affinity to poly(methyl methacrylate) resin by use of molecular simulation-based materials informatics

2021 ◽  
Author(s):  
Tomio Iwasaki ◽  
Masashi Maruyama ◽  
Tatsuya Niwa ◽  
Toshiki Sawada ◽  
Takeshi Serizawa
Keyword(s):  
Methyl Methacrylate ◽  
Binding Affinity ◽  
Molecular Simulation ◽  
Dynamics Simulation ◽  
Binding Affinities ◽  
Materials Informatics ◽  
Poly Methyl Methacrylate ◽  
Strong Binding ◽  
Experimental Values ◽  
Pmma Resin

AbstractPeptides with strong binding affinities for poly(methyl methacrylate) (PMMA) resin were designed by use of materials informatics technology based on molecular dynamics simulation for the purpose of covering the resin surface with adhesive peptides, which were expected to result in eco-friendly and biocompatible biomaterials. From the results of binding affinity obtained with this molecular simulation, it was confirmed that experimental values could be predicted with errors <10%. By analyzing the simulation data with the response-surface method, we found that three peptides (RWWRPWW, EWWRPWR, and RWWRPWR), which consist of arginine (R), tryptophan (W), and proline (P), have strong binding affinity to the PMMA resin. These amino acids were effective because arginine and tryptophan have strong binding affinities for methoxycarbonyl groups and methyl groups, which are the main constituents of the PMMA resin, and proline stabilizes the flat zigzag structures of the peptides in water. The strong binding affinities of the three peptides were confirmed by experiments (surface plasmon resonance methods).

scholarly journals Effect of Antibacterial Silver-Releasing Filler on the Physicochemical Properties of Poly(Methyl Methacrylate) Denture Base Material

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4146 ◽  
Author(s):  
Grzegorz Chladek ◽  
Katarzyna Pakieła ◽  
Wojciech Pakieła ◽  
Jarosław Żmudzki ◽  
Marcin Adamiak ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flexural Strength ◽  
Methyl Methacrylate ◽  
Flexural Modulus ◽  
Base Material ◽  
Distilled Water ◽  
Denture Base ◽  
Inorganic Particles ◽  
Poly Methyl Methacrylate ◽  
Enhanced Solubility

Colonization of polymeric dental prosthetic materials by yeast-like fungi and the association of these microorganisms with complications occurring during prosthetic treatment are important clinical problems. In previously presented research, submicron inorganic particles of silver sodium hydrogen zirconium phosphate (S–P) were introduced into poly(methyl methacrylate) (PMMA) denture base material which allowed for obtaining the antimicrobial effect during a 90 day experiment. The aim of the present study was to investigate the flexural strength, impact strength, hardness, wear resistance, sorption, and solubility during three months of storage in distilled water. With increasing S–P concentration after 2 days of conditioning in distilled water, reduced values of flexural strength (107–72 MPa), impact strength (18.4–5.5 MPa) as well as enhanced solubility (0.95–1.49 µg/mm3) were registered, but they were at acceptable levels, and the sorption was stable. Favorable changes included increased hardness (198–238 MPa), flexural modulus (2.9–3.3 GPa), and decreased volume loss during wear test (2.9–0.2 mm3). The percentage changes of the analyzed properties during the 90 days of storage in distilled water were similar for all materials.

scholarly journals The Effects of Tormentic Acid and Extracts from Callistemon citrinus on Candida albicans and Candida tropicalis Growth and Inhibition of Ergosterol Biosynthesis in Candida albicans

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chido Bvumbi ◽  
Godloves Fru Chi ◽  
Marc Y. Stevens ◽  
Molly Mombeshora ◽  
Stanley Mukanganyama
Keyword(s):  
Candida Albicans ◽  
Antifungal Activity ◽  
Candida Tropicalis ◽  
Methanol Extract ◽  
Fungal Infections ◽  
Water Extract ◽  
Antifungal Drugs ◽  
Ergosterol Content ◽  
Broth Microdilution Method ◽  
Tormentic Acid

Candida albicans and Candida tropicalis are the leading causes of human fungal infections worldwide. There is an increase in resistance of Candida pathogens to existing antifungal drugs leading to a need to find new sources of antifungal agents. Tormentic acid has been isolated from different plants including Callistemon citrinus and has been found to possess antimicrobial properties, including antifungal activity. The study aimed to determine the effects of tormentic and extracts from C. citrinus on C. albicans and C. tropicalis and a possible mode of action. The extracts and tormentic acid were screened for antifungal activity using the broth microdilution method. The growth of both species was inhibited by the extracts, and C. albicans was more susceptible to the extract compared to C. tropicalis. The growth of C. albicans was inhibited by 80% at 100 μg/ml of both the DCM: methanol extract and the ethanol: water extract. Tormentic acid reduced the growth of C. albicans by 72% at 100 μg/ml. The effects of the extracts and tormentic acid on ergosterol content in C. albicans were determined using a UV/Vis scanning spectrophotometer. At concentrations of tormentic acid of 25 μg/ml, 50 μg/ml, 100 μg/ml, and 200 μg/ml, the content of ergosterol was decreased by 22%, 36%, 48%, and 78%, respectively. Similarly, the DCM: methanol extract at 100 μg/ml and 200 μg/ml decreased the content by 78% and 88%, respectively. A dose-dependent decrease in ergosterol content was observed in cells exposed to miconazole with a 25 μg/ml concentration causing a 100% decrease in ergosterol content. Therefore, tormentic acid inhibits the synthesis of ergosterol in C. albicans. Modifications of the structure of tormentic acid to increase its antifungal potency may be explored in further studies.

scholarly journals Degradation of ultra-high molecular weight poly(methyl methacrylate-co-butyl acrylate-co-acrylic acid) under ultra violet irradiation

RSC Advances ◽  
2017 ◽  
Vol 7 (1) ◽  
pp. 112-120 ◽  
Author(s):  
R. Shanti ◽  
A. N. Hadi ◽  
Y. S. Salim ◽  
S. Y. Chee ◽  
S. Ramesh ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Acrylic Acid ◽  
Methyl Methacrylate ◽  
High Molecular Weight ◽  
Butyl Acrylate ◽  
Ultra Violet ◽  
Seeded Emulsion Polymerization ◽  
Poly Methyl Methacrylate ◽  
Ultra High Molecular Weight ◽  
High Molecular Weight Poly

A new acrylic terpolymer, poly(methyl methacrylate-co-butyl acrylate-co-acrylic acid) [P(MMA-co-BA-co-AA)] of ultra-high molecular weight (UHMW) was synthesizedviaseeded emulsion polymerization.

scholarly journals Novel Dental Poly (Methyl Methacrylate) Containing Phytoncide for Antifungal Effect and Inhibition of Oral Multispecies Biofilm

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 371 ◽  
Author(s):  
Myung-Jin Lee ◽  
Min-Ji Kim ◽  
Sang-Hwan Oh ◽  
Jae-Sung Kwon
Keyword(s):  
Candida Albicans ◽  
Flexural Strength ◽  
Methyl Methacrylate ◽  
Cell Viability ◽  
Mtt Assay ◽  
Biological Properties ◽  
Basic Material ◽  
Pathogenic Yeast ◽  
Poly Methyl Methacrylate ◽  
Biofilm Thickness

Despite the many advantages of poly (methyl methacrylate) (PMMA) as a dental polymer, its antifungal and antibacterial effects remain limited. Here, phytoncide was incorporated into PMMA to inhibit fungal and biofilm accumulation without impairing the basic and biological properties of PMMA. A variable amount of phytoncide (0 wt % to 5 wt %) was incorporated into PMMA, and the basic material properties of microhardness, flexural strength and gloss were evaluated. In addition, cell viability was confirmed by MTT assay. This MTT assay measures cell viability via metabolic activity, and the color intensity of the formazan correlates viable cells. The fungal adhesion and viability on the PMMA surfaces were evaluated using Candida albicans (a pathogenic yeast). Finally, the thickness of saliva-derived biofilm was estimated. The flexural strength of PMMA decreased with increasing phytoncide contents, whereas there were no significant differences in the microhardness and gloss (p > 0.05) and the cell viability (p > 0.05) between the control and the phytoncide-incorporated PMMA samples. The amounts of adherent Candida albicans colony-forming unit (CFU) counts, and saliva-derived biofilm thickness were significantly lower in the phytoncide-incorporated PMMA compared to the control (p < 0.05). Hence, it was concluded that the incorporation of appropriate amounts of phytoncide in PMMA demonstrated antifungal effects while maintaining the properties, which could be a possible use in dentistry application such as denture base resin.

scholarly journals Effects ofMentha suaveolensEssential Oil Alone or in Combination with Other Drugs inCandida albicans

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Annarita Stringaro ◽  
Elisabetta Vavala ◽  
Marisa Colone ◽  
Federico Pepi ◽  
Giuseppina Mignogna ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Candida Albicans ◽  
Fungal Infections ◽  
Antifungal Drugs ◽  
Yeast Cells ◽  
Cellular Damage ◽  
Prolonged Treatment ◽  
Microbial Biofilms ◽  
Transmission Electron ◽  
Morphological Differences

Candidosis is the most important cause of fungal infections in humans. The yeastCandida albicanscan form biofilms, and it is known that microbial biofilms play an important role in human diseases and are very difficult to treat. The prolonged treatment with drugs has often resulted in failure and resistance. Due to the emergence of multidrug resistance, alternatives to conventional antimicrobial therapy are needed. This study aims to analyse the effects induced by essential oil ofMentha suaveolensEhrh (EOMS) onCandida albicansand its potential synergism when used in combination with conventional drugs. Morphological differences between control and EOMS treated yeast cells or biofilms were observed by scanning electron microscopy and transmission electron microscopy (SEM and TEM resp.,). In order to reveal the presence of cell cycle alterations, flow cytometry analysis was carried out as well. The synergic action of EOMS was studied with the checkerboard method, and the cellular damage induced by different treatments was analysed by TEM. The results obtained have demonstrated both the effects of EOMS onC. albicansyeast cells and biofilms and the synergism of EOMS when used in combination with conventional antifungal drugs as fluconazole (FLC) and micafungin (MCFG), and therefore we can hypothesize on its potential use in therapy. Further studies are necessary to know its mechanism of action.

scholarly journals Visible Lights Combined with Photosensitizing Compounds Are Effective against Candida albicans Biofilms

2021 ◽  
Vol 9 (3) ◽  
pp. 500 ◽  
Author(s):  
Priyanka Bapat ◽  
Gurbinder Singh ◽  
Clarissa J. Nobile
Keyword(s):  
Candida Albicans ◽  
Photodynamic Therapy ◽  
Biofilm Formation ◽  
Fungal Pathogens ◽  
Fungal Infections ◽  
Therapeutic Strategies ◽  
Antifungal Drugs ◽  
Clinical Settings ◽  
Drug Resistant ◽  
Candida Albicans Biofilms

Fungal infections are increasing in prevalence worldwide, especially in immunocompromised individuals. Given the emergence of drug-resistant fungi and the fact that there are only three major classes of antifungal drugs available to treat invasive fungal infections, there is a need to develop alternative therapeutic strategies effective against fungal infections. Candida albicans is a commensal of the human microbiota that is also one of the most common fungal pathogens isolated from clinical settings. C. albicans possesses several virulence traits that contribute to its pathogenicity, including the ability to form drug-resistant biofilms, which can make C. albicans infections particularly challenging to treat. Here, we explored red, green, and blue visible lights alone and in combination with common photosensitizing compounds for their efficacies at inhibiting and disrupting C. albicans biofilms. We found that blue light inhibited biofilm formation and disrupted mature biofilms on its own and that the addition of photosensitizing compounds improved its antibiofilm potential. Red and green lights, however, inhibited biofilm formation only in combination with photosensitizing compounds but had no effects on disrupting mature biofilms. Taken together, these results suggest that photodynamic therapy may be an effective non-drug treatment for fungal biofilm infections that is worthy of further exploration.

scholarly journals Candida albicans hyphal expansion causes phagosomal membrane damage and luminal alkalinization

2018 ◽  
Author(s):  
Johannes Westman ◽  
Gary Moran ◽  
Selene Mogavero ◽  
Bernhard Hube ◽  
Sergio Grinstein
Keyword(s):  
Candida Albicans ◽  
Fungal Infections ◽  
Membrane Damage ◽  
Hyphal Growth ◽  
Antifungal Drugs ◽  
Apparent Paradox ◽  
Opportunistic Fungi ◽  
Life Threatening ◽  
Proton Leakage ◽  
Phagosomal Membrane

ABSTRACTMacrophages rely on phagosomal acidity to destroy engulfed microorganisms. To survive this hostile response, opportunistic fungi such as Candida albicans developed strategies to evade the acidic environment. C. albicans is polymorphic, able to convert from yeast to hyphae, and this transition is required to subvert the microbicidal activity of the phagosome. However, the phagosomal lumen, which is acidic and nutrient-deprived, inhibits yeast-to-hypha transition. To account for this apparent paradox, it was recently proposed that C. albicans produces ammonia that alkalinizes the phagosome, thus facilitating yeast-to-hypha transformation. We re-examined the mechanism underlying phagosomal alkalinization by applying dual-wavelength ratiometric pH measurements. The phagosomal membrane was found to be highly permeable to ammonia, which is therefore unlikely to account for the pH elevation. Instead, we find that yeast-to-hypha transition begins within acidic phagosomes, and that alkalinization is a consequence of proton leakage induced by excessive membrane distension caused by the expanding hypha.IMPORTANCEC. albicans is the most common nosocomial fungal infection, and over three million people acquire life-threatening invasive fungal infections every year. Even if antifungal drugs exist, almost half of these patients will die. Despite this, fungi remain underestimated as pathogens. Our study uses quantitative biophysical approaches to demonstrate that the yeast-to-hypha transition occurs within the nutrient deprived, acidic phagosome and that alkalinization is a consequence, as opposed to the cause of hyphal growth.

Sign in / Sign up

Export Citation Format

Share Document