A case study for cost-effective design of relocatable deep dewpoint control gas plant

2017 ◽  
Vol 57 (2) ◽  
pp. 607
Author(s):  
Brian Jung ◽  
Niel Kritzinger ◽  
Steven van Wagensveld ◽  
John Mak
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Time Frame ◽  
Economic Benefits ◽  
Medium Size ◽  
Field Development ◽  
The North ◽  
Market Economic ◽  
Liquid Products ◽  
Recent Project

Australia has significant smaller-capacity gas fields, in relatively remote areas. An economically viable design for the Australian market is a small to mid-size gas plant to produce pipeline-quality gas and recover attractive amounts of liquid products (NGLs) for export by truck. Such a plant has minimal equipment, is highly modularised to be cost-effective for remote locations with high labour costs, can be relocated, and can be implemented in a substantially shorter time frame than conventional projects. For the North and South American markets, we have developed a deep dewpointing process that combines high NGL recovery with simplicity of design, yet is flexible enough to accommodate a range of compositions and flow rates. This design is well suited for standardisation of small to medium-size gas plants where feed gas compositions may vary and capacity increases are not well known. A short implementation schedule provides first-to-market economic benefits. We have developed 3rd Generation ModularisationSM that is proven to significantly reduce a plant’s footprint compared with more traditional modularisation practices. This new approach makes it possible to design a gas processing facility as transportable modules that can be built in the most cost-effective location, are low cost to install and may be relocated in the future. This has been demonstrated in a recent project completed in 2015 for Shell in Canada. This paper presents the solution for the Australian market that combines the benefits of high gas liquids recovery with low investment, delivered in compact relocatable modules that enable very flexible field development strategies.

JOHN BROOKES GAS FIELD DEVELOPMENT

2005 ◽  
Vol 45 (1) ◽  
pp. 13
Author(s):  
A.J. McDiarmid ◽  
P.T. Bingaman ◽  
S.T. Bingham ◽  
B. Kirk-Burnnand ◽  
D.P. Gilbert ◽  
...  
Keyword(s):  
Low Cost ◽  
Time Frame ◽  
Gas Production ◽  
Gas Field ◽  
Initial Development ◽  
North West ◽  
Field Development ◽  
The North ◽  
Production Wells ◽  
Development Approach

The John Brookes gas field was discovered by the drilling of John Brookes–1 in October 1998 and appraisal drilling was completed in 2003. The field is located about 40 km northwest of Barrow Island on the North West Shelf, offshore West Australia. The John Brookes structure is a large (>90 km2) anticline with >100 m closure mapped at the base of the regional seal. Recoverable sales gas in the John Brookes reservoir is about 1 Tcf.Joint venture approval to fast track the development was gained in January 2004 with a target of first gas production in June 2005. The short development time frame required parallel workflows and use of a flexible/low cost development approach proven by Apache in the area.The John Brookes development is sized for off-take rates up to 240 TJ/d of sales gas with the development costing A$229 million. The initial development will consist of three production wells tied into an unmanned, minimal facility wellhead platform. The platform will be connected to the existing East Spar gas processing facilities on Varanus Island by an 18-inch multi-phase trunkline. Increasing the output of the existing East Spar facility and installation of a new gas sweetening facility are required. From Varanus Island, the gas will be exported to the mainland by existing sales gas pipelines. Condensate will be exported from Varanus Island by tanker.

DRIVERS FOR THE DEVELOPMENT OF AN INTEGRATED SUPPLY BASE AND OFFSHORE SUPPLY CHAIN, NORTH WEST SHELF, AUSTRALIA

2004 ◽  
Vol 44 (1) ◽  
pp. 593
Author(s):  
E.D. Graham
Keyword(s):  
Supply Chain ◽  
Critical Mass ◽  
Cost Effective ◽  
Integrated Services ◽  
Economic Benefits ◽  
Security Issue ◽  
North West ◽  
The North ◽  
User Facility ◽  
Integrated Service

Since the commencement of the major developments on the North West Shelf, the offshore resource industry, during both its construction and operational phases, has faced considerable logistical impediments to cost-effective solutions for the offshore supply chain. These impediments have included distance, scant resources, lack of infrastructure both on and offshore and lack of critical mass.Throughout the world, offshore projects have greatly benefitted from the availability of integrated services to cater for the transport of equipment from the point of manufacture or distribution to the offshore location.Within the Australian context the privately controlled Esso Barry Beach and Dampier Woodside facilities are examples of integrated services, but both differ considerably from a public multi-user facility. The model used in the Timor Sea of one vessel or vessels for the use of several operators is another example.The NorthWest Shelf has now reached the critical mass and it became apparent several years ago that the area needed an integrated supply base available to multiple operators. It would need to include a heavy loadout wharf, laydown areas, slipway and engineering facilities and office space to service forthcoming projects, as well as planning and cooperation amongst all players to maximise efficiency and use of scant resources as drivers for economic benefits to offshore operators in the region.Furthermore the fallout from the events of 11 September 2001 and continuing threats of terrorism has meant the security of marine assets has become an important part of each operator’s everyday life. The introduction of new legislation relating to this security issue is planned for mid 2004.In 2000 and 2001 Mermaid Marine Australia Limited undertook a major expansion of its Dampier supply base, and established a world-class facility to meet the growing demands of the region.This complex has for the first time provided the northwest of Australia, particularly the North West Shelf, Carnarvon Basin and the onshore developments on the Burrup Peninsula, with a facility for offloading and loadout of heavy shipments and fabrication and slipway facilities, coupled with the advantages of a large supply base. This facility can also be expanded to meet growth and the emerging requirements related to security.This paper describes the drivers for change commencing with the earliest supply chains and following through to the integrated service now availabe. These drivers meet the requirements of the offshore operators in the region as well as showing the benefits anticipated from this integrated service. The paper also outlines in detail the requirements of the International Maritime Organisation for worldwide changes to port and offshore security.

scholarly journals Energy Market Integration in Northeast Region of India: Efficiencies, Vulnerabilities and Strategic Implications for Asia

2020 ◽  
Vol 2 (1) ◽  
pp. 82-96
Author(s):  
Venkatachalam Anbumozhi ◽  
Ichiro Kutani ◽  
Bhupendra Kumar Singh
Keyword(s):  
Market Integration ◽  
Supply And Demand ◽  
Cost Effective ◽  
Clean Energy ◽  
Economic Benefits ◽  
Energy Market ◽  
Climate Mitigation ◽  
Eastern Region ◽  
The North ◽  
Wide Range

Energy is a common thread that connects multiple economic domains of countries and sub-regions in Asia. In the drive to trigger and consolidate energy market integration, the North Eastern Region (NER) of India offers great potential as electricity trading hub. This article analyses multiple potentials of energy markers of NER with neighbouring countries through cross-border trade. Supply and demand analysis under different connectivity scenarios shows that not only the eight states of NER of India may be able to fully utilise the economic benefits of energy market integration, but also the neighbouring countries like Bangladesh, Bhutan and Myanmar should keep their carbon emissions in check by importing reliable cost effective energy sources. However, lack of infrastructure for the transfer of power to a common transmission system increases the vulnerability of energy market integration. Given the region’s diverse hydro-geography and wide range of clean energy portfolios, energy market integration perspective offers a way forward for strategic energy security planning and climate mitigation strategy for NER and neighbouring Asian countries.

SEM Evaluation of Chemically Finished Nonwoven Fabrics from Recycled Fibers

2000 ◽  
Vol 6 (S2) ◽  
pp. 770-771
Author(s):  
W. R. Goynes ◽  
E. E. Graves ◽  
W. Tao ◽  
G. F. D'Anna ◽  
M. P. Day ◽  
...  
Keyword(s):  
Textile Industry ◽  
Low Cost ◽  
Cost Effective ◽  
Economic Benefits ◽  
Health Care Facilities ◽  
Nonwoven Fabrics ◽  
Care Facilities ◽  
Emergency Housing ◽  
Recycled Fibers

The textile industry produces large quantities of waste and scrap materials. Most of this waste requires disposal. Both environmental and economic benefits could be derived by developing commercial products to use these materials. Environmentally acceptable textile products include those that utilize recycled materials, or materials that have not been chemically processed. Such products are often not economically profitable because of the added expense necessary for environmental protection. Development of such a cost-effective textile product requires use of low-cost materials, minimal cost production processes, and finishes that have already been developed and tested.The objective of this research was to develop a semi-disposable, economical, light-weight, comfortable thermal blanket that would be both flame-resistant and antibacterial through a limited number of laundry cycles. Targeted uses would be in medical and health care facilities, disaster relief centers, short term and emergency housing needs, recreational areas such as camping, and in military maneuvers where environmental conditions could be harmful to long-term products.

scholarly journals Economic evaluation of the anti-stigma social marketing campaign in England 2009-2011

2013 ◽  
Vol 202 (s55) ◽  
pp. s95-s101 ◽  
Author(s):  
Sara Evans-Lacko ◽  
Claire Henderson ◽  
Graham Thornicroft ◽  
Paul McCrone
Keyword(s):  
Economic Impact ◽  
Social Marketing ◽  
Mental Health Problems ◽  
Low Cost ◽  
Cost Effective ◽  
Economic Benefits ◽  
Health Improvement ◽  
Marketing Campaign ◽  
Social Marketing Campaign ◽  
The Impact

BackgroundEvidence on the economic impact of social marketing antistigma campaigns in relation to people with mental illness is limited.AimsTo describe the economic impact of the Time to Change (TTC) anti-stigma social marketing campaign, including the potential effects on the wider economy.MethodData collected for the evaluation of TTC were combined with the social marketing campaign expenditure data to investigate differences in knowledge, attitudes and behaviour in relation to campaign awareness. To evaluate the return on investment, we applied a decision model that estimated the impact on employment for people with depression.ResultsBased on average national social marketing campaign costs, the economic benefits outweighed costs even if the campaign resulted in only 1% more people with depression accessing services and gaining employment if they experienced a health improvement The cost per person with improved intended behaviour was at most £4 if we assume the campaign was responsible for 50% of the change. Costs associated with improved knowledge and attitudes, however, were more variable.ConclusionsThe findings suggest that the TTC anti-stigma social marketing campaign is a potentially cost-effective and low-cost intervention for reducing the impact of stigma on people with mental health problems.

ASSESSMENT OF THE PLATELET COUNT IN THE PREGNANT WOMEN IN IGIMS, PATNA, BIHAR

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Tanwi Singh ◽  
Anshuman Sinha
Keyword(s):  
Platelet Count ◽  
Pregnant Women ◽  
Screening Test ◽  
Low Cost ◽  
Medical Science ◽  
Cost Effective ◽  
Platelet Indices ◽  
Increased Risk ◽  
Low Platelet Count ◽  
Severity Of The Disease

The major risk associated with low platelet count in pregnancy is the increased risk of bleeding during the childbirth or post that. There is an increased blood supply to the uterus during pregnancy and the surgical procedure requires cutting of major blood vessels. Women with thrombocytopenia are at increased risk of losing excessive blood. The risk is more in case of caesarean delivery as compared to vaginal delivery. Hence based on above findings the present study was planned for Assessment of the Platelet Count in the Pregnant Women in IGIMS, Patna, Bihar. The present study was planned in Department of Pathology, Indira Gandhi Institute of Medical Science, Patna, Bihar, India. The present study was planned from duration of January 2019 to June 2019. In the present study 200 pregnant females samples received for the platelet estimation were enrolled in the present study. Clinically platelet indices can be a useful screening test for early identification of preeclampsia and eclampsia. Also platelet indices can assess the prognosis of this disease in pregnant women and can be used as an effective prognostic marker because it correlates with severity of the disease. Platelet count is a simple, low cost, and rapid routine screening test. Hence the data generated from the present study concludes that platelet count can be used as a simple and cost effective tool to monitor the progression of preeclampsia, thereby preventing complications to develop during the gestational period. Keywords: Platelet Count, Pregnant Women, IGIMS, Patna, Bihar, etc.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

scholarly journals Microgrid as a Cost-Effective Alternative to Rural Network Underground Cabling for Adequate Reliability

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1978 ◽  
Author(s):  
Sanna Uski ◽  
Erkka Rinne ◽  
Janne Sarsama
Keyword(s):  
Case Studies ◽  
Power Supply ◽  
Dairy Farm ◽  
Cost Effective ◽  
Distribution Networks ◽  
Comparison Method ◽  
Economic Benefits ◽  
Economic Feasibility ◽  
Cost Calculation ◽  
Islanded Operation

Microgrids can be used for securing the supply of power during network outages. Underground cabling of distribution networks is another effective but conventional and expensive alternative to enhance the reliability of the power supply. This paper first presents an analysis method for the determination of microgrid power supply adequacy during islanded operation and, second, presents a comparison method for the overall cost calculation of microgrids versus underground cabling. The microgrid power adequacy during a rather long network outage is required in order to indicate high level of reliability of the supply. The overall cost calculation considers the economic benefits and costs incurred, combined for both the distribution network company and the consumer. Whereas the microgrid setup determines the islanded-operation power adequacy and thus the reliability of the supply, the economic feasibility results from the normal operations and services. The methods are illustrated by two typical, and even critical, case studies in rural distribution networks: an electric-heated detached house and a dairy farm. These case studies show that even in the case of a single consumer, a microgrid option could be more economical than network renovation by underground cabling of a branch in order to increase the reliability.

Azo (Hydrazone) pigments: general principles

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Christie
Keyword(s):  
High Performance ◽  
Metal Salt ◽  
Low Cost ◽  
Cost Effective ◽  
Precipitation Process ◽  
Ambient Temperatures ◽  
Technical Performance ◽  
Chemical Structures ◽  
General Chemical ◽  
Physical Form

Abstract This paper presents an overview of the general chemical principles underlying the structures, synthesis and technical performance of azo pigments, the dominant chemical class of industrial organic pigments in the yellow, orange, and red shade areas, both numerically and in terms of tonnage manufactured. A description of the most significant historical features in this group of pigments is provided, starting from the discovery of the chemistry on which azo colorants are based by Griess in the mid-nineteenth century, through the commercial introduction of the most important classical azo pigments in the early twentieth century, including products known as the Hansa Yellows, β-naphthol reds, including metal salt pigments, and the diarylide yellows and oranges, to the development in the 1950s and 1960s of two classes of azo pigments that exhibit high performance, disazo condensation pigments and benzimidazolone-based azo pigments. A feature that complicates the description of the chemical structures of azo pigments is that they exist in the solid state as the ketohydrazone rather than the hydroxyazo form, in which they have been traditionally been illustrated. Numerous structural studies conducted over the years on an extensive range of azo pigments have demonstrated this feature. In this text, they are referred to throughout as azo (hydrazone) pigments. Since a common synthetic procedure is used in the manufacture of virtually all azo (hydrazone) pigments, this is discussed in some detail, including practical aspects. The procedure brings together two organic components as the fundamental starting materials, a diazo component and a coupling component. An important reason for the dominance of azo (hydrazone) pigments is that they are highly cost-effective. The syntheses generally involve low cost, commodity organic starting materials and are carried out in water as the reaction solvent, which offers obvious economic and environmental advantages. The versatility of the approach means that an immense number of products may be prepared, so that they have been adapted structurally to meet the requirements of many applications. On an industrial scale, the processes are straightforward, making use of simple, multi-purpose chemical plant. Azo pigments may be produced in virtually quantitative yields and the processes are carried out at or below ambient temperatures, thus presenting low energy requirements. Finally, provided that careful control of the reaction conditions is maintained, azo pigments may be prepared directly by an aqueous precipitation process that can optimise physical form, with control of particle size distribution, crystalline structure, and surface character. The applications of azo pigments are outlined, with more detail reserved for subsequent papers on individual products.

Sign in / Sign up

Export Citation Format

Share Document