Effect of soil pH and crop sequence on the response of wheat (Triticum aestivum) to phosphorus fertiliser

2015 ◽  
Vol 66 (1) ◽  
pp. 23 ◽  
Author(s):  
Craig Scanlan ◽  
Ross Brennan ◽  
Gavin A. Sarre

Changes in soil fertility following long periods of crop production in the south-west of Western Australia (WA) may have implications for phosphorus (P) fertiliser recommendations for wheat production. When the sandy soils of the region were first cleared for agricultural production, they were typically marginally acidic to neutral, with soil extractable-P levels inadequate for crop production. Recent surveys have shown that 87% of soils in south-west WA exceed the critical soil extractable-P level required for 90% of maximum grain yield, and ~70% of soils have a surface-soil pHCa <5.5. There has also been a shift towards a high frequency of wheat in the crop sequence. We conducted a field experiment to begin to quantify the importance of the interactions between soil pH and crop sequence on wheat response to P fertiliser. For grain yield, the magnitude of the response was greatest for rate of P applied, followed by lime treatment and then crop sequence. There were no interactions between these treatments. Our analysis of the grain-yield response to rates of P fertiliser showed no significant difference between the shape of the grain-yield response curve for treatments with and without lime. However, we did find a significant interaction between lime treatment and rate of P fertiliser applied for shoot P concentration and that soil P was more plant-available in the +lime than the –lime treatment. There is justification for making realistic adjustments to yield potential based on soil pH or crop sequence, although further work is required to determine whether the shape of the grain-yield response curve varies with these two factors.

2000 ◽  
Vol 80 (1) ◽  
pp. 205-216 ◽  
Author(s):  
D. Spaner ◽  
D. B. McKenzie ◽  
A. G. Todd ◽  
A. Simms ◽  
M. MacPherson ◽  
...  

Livestock farmers in Newfoundland use most available land for forages. The local production of feed grains is negligible and expensive imported feed accounts for almost one half of farm operating expenses. Here, our objectives were to develop basic agronomic principles of mechanized spring grain production and to demonstrate grain production techniques to the Newfoundland farming community. Barley seeding date trials were conducted at five environments in eastern and western Newfoundland between 1996 and 1998. The relationship between soil pH and barley grain yield was explored through grid soil and yield sampling in two large fields in both 1997 and 1998. Between 1993 and 1998 over 20 livestock farmers throughout Newfoundland cooperated with the Newfoundland Grain Project, growing and comparing varieties of barley (Hordeum vulgare L.), spring wheat (Triticum aestivum L.) and oats (Avena sativa L.) on their farms. Late seeding of barley in the spring/summer resulted in linear grain yield reductions. A levelling off of yield response did not occur at greater cumulated growing degree days, possibly because optimum accumulation for maximum barley yield potential does not occur in Newfoundland. Resistant regression lines, describing the relationship between soil pH and grain yield were developed for two barley varieties, indicated that Sterling reached a yield plateau around a soil pH 6 in 1998, while Chapais reached a yield plateau at soil pH 5.4 in 1997. Barley is well adapted to Newfoundland growing conditions, normally providing a high-yielding, mature grain of good feeding quality. Farmers collaborating with the project were generally impressed with the potential of growing barley for grain and some are now regularly doing so. Key words: Seeding date; barley; wheat; oats; precision farming research


1998 ◽  
Vol 49 (4) ◽  
pp. 649 ◽  
Author(s):  
P. W. Moody ◽  
T. Dickson ◽  
R. L. Aitken

Maize (Zea mays) grain yield responses to rates of lime were measured at 19 sites onseveral soil types in south-east Queensland. At some sites, one rate of gypsum or phosphogypsum was also applied. Relative grain yield (100 mean yield of nil lime treatment/maximum yield) was correlated with each of soil pH (1 : 5 water and 1 : 5 0·01 M CaCl2), soil solution pH, exchangeable (1 M KCl) Al, exchangeable (1 M NH4Cl) Ca, Al saturation of the effective cation exchange capacity (ECEC), Ca saturation of the ECEC, and 0·01 M CaCl2 extractable Mn and Al. Across all soil types, Mitscherlich fits indicated that most of the variation in relative grain yield was accounted for by either Ca saturation (R2 = 0·62) or soil solution pH (R2 = 0·61), although soil pH(water) (R2 =0·53), Al saturation (R2 = 0·46), exchangeable Ca (R2 = 0·42), soil pH(CaCl2) (R2 = 0·40), and CaCl2-extractable Mn (R2 = 0·33) also accounted for significant (P < 0·05) amounts of variation. These results demonstrate that one or both of Al and Mn toxicities were having an impact on yieldat different sites. The contrast between the lack of responses to gypsum/phosphogypsum at mostlime responsive sites and the observation that Ca saturation was well correlated with relative grainyield suggested an ameliorating effect of Ca on Al toxicity. This effect was captured by an index,Al saturation/Ca saturation, which was well correlated with relative grain yield (R2 = 0·66 for a Mitscherlich fit). A step-up regression approach indicated that most variation in relative grain yield (RY) could beaccounted for by the following equation: The assessment of factors likely to limit yield on strongly acidic soils of the region will therefore needto include indices of Al and Mn toxicities as well as Ca status. Soil pH integrated the effects of these factors on yield, and as a single index, was shown to bean effective diagnostic tool. Relative grain yields of 90% were associated with pH values in the soil solution, 1 : 5 water and 1 : 5 0·01 M CaCl2 of 4·5, 5·2, and 4·4, respectively.


Soil Research ◽  
2017 ◽  
Vol 55 (4) ◽  
pp. 341 ◽  
Author(s):  
Craig A. Scanlan ◽  
Ross F. Brennan ◽  
Mario F. D'Antuono ◽  
Gavin A. Sarre

Interactions between soil pH and phosphorus (P) for plant growth have been widely reported; however, most studies have been based on pasture species, and the agronomic importance of this interaction for acid-tolerant wheat in soils with near-sufficient levels of fertility is unclear. We conducted field experiments with wheat at two sites with acid soils where lime treatments that had been applied in the 6 years preceding the experiments caused significant changes to soil pH, extractable aluminium (Al), soil nutrients and exchangeable cations. Soil pH(CaCl2) at 0–10cm was 4.7 without lime and 6.2 with lime at Merredin, and 4.7 without lime and 6.5 with lime at Wongan Hills. A significant lime×P interaction (P<0.05) for grain yield was observed at both sites. At Merredin, this interaction was negative, i.e. the combined effect of soil pH and P was less than their additive effect; the difference between the dose–response curves without lime and with lime was greatest at 0kgPha–1 and the curves converged at 32kgPha–1. At Wongan Hills, the interaction was positive (combined effect greater than the additive effect), and lime application reduced grain yield. The lime×P interactions observed are agronomically important because different fertiliser P levels were required to maximise grain yield. A lime-induced reduction in Al phytotoxicity was the dominant mechanism for this interaction at Merredin. The negative grain yield response to lime at Wongan Hills was attributed to a combination of marginal soil potassium (K) supply and lime-induced reduction in soil K availability.


Soil Research ◽  
2011 ◽  
Vol 49 (7) ◽  
pp. 559 ◽  
Author(s):  
Y. P. Dang ◽  
R. C. Dalal ◽  
M. J. Pringle ◽  
A. J. W. Biggs ◽  
S. Darr ◽  
...  

Salinity, sodicity, acidity, and phytotoxic concentrations of chloride (Cl–) in soil are major constraints to crop production in many soils of north-eastern Australia. Soil constraints vary both spatially across the landscape and vertically within the soil profile. Identification of the spatial variability of these constraints will allow farmers to tune management to the potential of the land, which will, in turn, bring economic benefit. For three cropping fields in Australia’s northern grains region, we used electromagnetic induction with an EM38, which measures apparent electrical conductivity of the soil (ECa) and soil sampling to identify potential management classes. Soil Cl– and soluble Na+ concentrations, EC of the saturated extract (ECse), and soil moisture were the principal determinants of the variation of ECa, measured both at the drained upper limit of moisture (UL) and at the lower limit (LL) of moisture extracted by the crop. Grain yield showed a strong negative relation with ECa at both UL and LL, although it was stronger for the latter. We arrive at a framework to estimate the monetary value of site-specific management options, through: (i) identification of potential management classes formed from ECa at LL; (ii) measurement of soil attributes generally associated with soil constraints in the region; (iii) grain yield monitoring; and (iv) simple on-farm experiments. Simple on-farm experiments suggested that, for constrained areas, matching fertiliser application to realistic yield potential, coupled to gypsum amelioration, could potentially benefit growers by AU$14–46/ha.year (fertiliser) and $207/ha.3 years (gypsum).


Agronomy ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 230 ◽  
Author(s):  
Kristina Toderich ◽  
Elena Shuyskaya ◽  
Zulfira Rakhmankulova ◽  
Roman Bukarev ◽  
Temur Khujanazarov ◽  
...  

With continued population growth, increasing staple crop production is necessary. However, in dryland areas, this is negatively affected by various abiotic stresses, such as drought and salinity. The field screening of 10 improved genetic lines of pear millet originating from African dryland areas was conducted based on a set of agrobiological traits (i.e., germination rate, plant density, plant maturity rate, forage, and grain yields) in order to understand plant growth and its yield potential responses under saline environments. Our findings demonstrated that genotype had a significant impact on the accumulation of green biomass (64.4% based on two-way ANOVA), while salinity caused reduction in grain yield value. HHVBC Tall and IP 19586 were selected as the best-performing and high-yielding genotypes. HHVBC Tall is a dual purpose (i.e., forage and grain) line which produced high grain yields on marginal lands, with soil salinization up to electrical conductivity (EC) 6–8 dS m−1 (approximately 60–80 mM NaCl). Meanwhile, IP 19586, grown under similar conditions, showed a rapid accumulation of green biomass with a significant decrease in grain yield. Both lines were tolerant to drought and sensitive to high salinity (above 200 mM NaCl). The threshold salinity of HHVBC Tall calculated at the seedling stage was lower than that of IP 19586. Seedling viability of these lines was affected by oxidative stress and membrane peroxidation, and they had decreased chlorophyll and carotenoid biosynthesis. This study demonstrated that ionic stress is more detrimental for the accumulation of green and dry biomass, in combination with increasing the proline and malonic dialdehyde (MDA) contents of both best-performing pearl millet lines, as compared with osmotic stress.


2015 ◽  
Vol 66 (4) ◽  
pp. 332 ◽  
Author(s):  
Lindsay W. Bell ◽  
Julianne M. Lilley ◽  
James R. Hunt ◽  
John A. Kirkegaard

Interest is growing in the potential to expand cropping into Australia’s high-rainfall zone (HRZ). Dual-purpose crops are suited to the longer growing seasons in these environments to provide both early grazing for livestock and later regrow to produce grain. Grain yield and grazing potential of wheats of four different maturity types were simulated over 50 years at 13 locations across Australia’s HRZ, and sowing date, nitrogen (N) availability and crop density effects were explored. Potential grazing days on wheat were obtained by simulating sheep grazing crops to Zadoks growth stage Z30 at 25 dry sheep equivalents (DSE)/ha. Optimal sowing dates for each maturity type at each location were matched to the flowering window during which risk of frost and heat stress was lowest. Overall, we found significant national potential for dual-purpose use of winter wheat cultivars across Australia’s HRZ, with opportunities identified in all regions. Simulated mean wheat yields exceeded 6 t/ha at most locations, with highest mean grain yields (8–10 t/ha) in southern Victoria, and lower yields (5–7 t/ha) in the south-west of Western Australia (WA) and central and northern New South Wales (NSW). Highest grazing days were from winter cultivars sown early (March–mid-April), which could provide 1700–3000 DSE-days/ha of grazing across HRZ locations; this was 2–3 times higher than could be obtained from grazing spring cultivars (200–800 DSE-days/ha). Sowing date was critical to maximise both grazing and grain yield potential from winter cultivars; each 1-week delay in sowing after 8 March reduced grazing by 200–250 DSE-days/ha and grain yield by 0.45 t/ha. However, in Mediterranean climates, a lower frequency of early sowing opportunities before mid-April (<30% of years) is likely to limit the potential to use winter cultivars. Prospects to graze shorter season spring cultivars that fit later sowing windows require further examination in south-west WA, the slopes of NSW and southern Queensland.


2019 ◽  
Vol 56 (2) ◽  
pp. 239-252 ◽  
Author(s):  
Adriana Derejko ◽  
Marcin Studnicki

SummaryTriticale (Triticosecale Wittmack) is obtained through the crossing of wheat (Triticum ssp.) and rye (Secale cereale L.) and is characterized by high yield potential, good health and grain value, and high tolerance to biotic and abiotic stress. Poland is a very important region for progress in triticale breeding, since it is home to most cultivars, and numerous genetic studies on triticale have been carried out. Despite the tremendous interest in triticale among both breeders and researchers, there are no studies assessing the adaptation of cultivars to environmental conditions across growing seasons. This study was conducted to investigate the influence of cultivar, management, location and growing season on grain yield. At the same time, this approach provides a new way to determine whether there is any dependency between the eight seasons, and to find the cause of the yield response to environmental conditions in a given growing season.


2009 ◽  
Vol 55 (No. 12) ◽  
pp. 519-527 ◽  
Author(s):  
J. Potarzycki ◽  
W. Grzebisz

Actual yields of maize harvested by farmers are at level much below attainable yield potential of currently cultivated varieties. Among many growth factors zinc was recognized as one of main limiting factors of maize crop growth and yielding. This hypothesis has been verified within a three-year field study, where zinc fertilizer was applied to maize plants at the 5<sup>th</sup> leaf stage. Maize crop responded significantly to zinc foliar application in two of three years of study. The optimal rate of zinc foliar spray for achieving significant grain yield response was in the range from 1.0 to 1.5 kg Zn/ha. Grain yield increase was circa 18% (mean of three years) as compared to the treatment fertilized only with NPK. Plants fertilized with 1.0 kg Zn/ha significantly increased both total N uptake and grain yield. Yield forming effect of zinc fertilizer revealed via improvement of yield structure elements. The number of kernels per plant showed the highest response (+17.8% as compared to the NPK plot) and simultaneously the highest dependence on N uptake (<i>R</i><sup>2</sup> = 0.79). For this particular zinc treatment, however, the length of cob can also be applied as a component of yield structure significantly shaping the final grain yield.


2019 ◽  
Vol 70 (4) ◽  
pp. 295 ◽  
Author(s):  
Geoffrey Anderson ◽  
Richard Bell

Soil acidity, or more specifically aluminium (Al) toxicity, is a major soil limitation to growing wheat (Triticum aestivum L.) in the south of Western Australia (SWA). Application of calcium carbonate (lime) is used to correct Al toxicity by increasing soil pH and decreasing soluble soil Al3+. Soil testing using a 0.01 m calcium chloride (CaCl2) solution can measure both soil pH (pHCaCl2) and soil Al (AlCaCl2) for recommending rates of lime application. This study aimed to determine which combination of soil pHCaCl2 or soil AlCaCl2 and sampling depth best explains the wheat grain-yield increase (response) when lime is applied. A database of 31 historical lime experiments was compiled with wheat as the indicator crop. Wheat response to lime application was presented as relative yield percentage (grain yield for the no-lime treatment divided by the highest grain yield achieved for lime treatments × 100). Soil sampling depths were 0–10, 10–20 and 20–30 cm and various combinations of these depths. For evidence that lime application had altered soil pHCaCl2, we selected the change in the lowest pHCaCl2 value of the three soil layers to a depth of 30 cm as a result of the highest lime application (ΔpHmin). When ΔpHmin &lt;0.3, the lack of grain-yield response to lime suggested that insufficient lime had leached into the 10–30 cm soil layer to remove the soil Al limitation for these observations. Also, under high fallow-season rainfall (228 and 320 mm) and low growing-season rainfall (GSR) (&lt;140 mm), relative yield was lower for the measured level of soil AlCaCl2 than in the other observations. Hence, after excluding observations with ΔpHmin &lt;0.3 or GSR &lt;140 mm (n = 19), soil AlCaCl2 provided a better definition of the relationship between soil test and wheat response (r2 range 0.48–0.74) than did soil pHCaCl2 (highest r2 0.38). The critical value (defined at relative yield = 90%) ranged from 2.5 mg Al kg–1 (for soil Al calculated according to root distribution by depth within the 0–30 cm layer) to 4.5 mg Al kg–1 (calculated from the highest AlCaCl2 value from the three soil layers to 30 cm depth). We conclude that 0.01 m CaCl2 extractable Al in the 0–30 cm layer will give the more accurate definition of the relationship between soil test and wheat response in SWA.


2017 ◽  
Vol 64 (7) ◽  
pp. 953-966 ◽  
Author(s):  
Rebecca Oiza Enesi ◽  
Stefan Hauser ◽  
Antonio Lopez-Montez ◽  
Oluwole Osonubi

Sign in / Sign up

Export Citation Format

Share Document