Voltage control magnetism and ferromagnetic resonance in Fe19Ni81/PMN-PT heterostructure by strain

2021 ◽  
Author(s):  
Jun Ren ◽  
Junming Li ◽  
Sheng Zhang ◽  
Jun Li ◽  
Wenxia Su ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Ferromagnetic Resonance ◽  
Piezoelectric Properties ◽  
Resonance Field ◽  
Voltage Control ◽  
Spintronic Devices ◽  
Magnetic Devices ◽  
Potential Applications ◽  
Different Strains ◽  
Rf Microwave

Abstract Voltage control magnetism have been widely studied due to their potential applications in the next generation of information technology. PMN-PT, as a single crystal ferroelectric substrate, has been widely used in the study of voltage control magnetism because of its excellent piezoelectric properties. However, most of the research based on PMN-PT only studies the influence of a single tensile (or compressive) stress on the magnetic properties due to the asymmetry of strain. In this work, we show the effect of different strains on the magnetic anisotropy of Fe19Ni81/(011) PMN-PT heterojunction. More importantly, the (011) cut PMN-PT has the characteristics of generating non-volatile strain, which provides the advantage for investigating the voltage manipulation of RF/microwave magnetic devices. As a result, a ferromagnetic resonance field tunability of 70 Oe is induced in our sample by the non-volatile strain. Our results provide new possibilities for novel voltage adjustable RF/microwave magnetic devices and spintronic devices.

scholarly journals Orientation Growth and Magnetic Properties of Electrochemical Deposited Nickel Nanowire Arrays

Catalysts ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 152 ◽  
Author(s):  
Yanlong Yu ◽  
Jinpeng Li ◽  
Jun Wang ◽  
Xige Wu ◽  
Cuiyan Yu ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Growth Direction ◽  
Anodic Aluminum Oxide Template ◽  
Nanowire Arrays ◽  
Confined Space ◽  
Spintronic Devices ◽  
Potential Applications ◽  
Parallel Direction ◽  
Nickel Nanowire ◽  
Preparation Strategy

Highly ordered ferromagnetic metal nanowire arrays with preferred growth direction show potential applications in electronic and spintronic devices. In this work, by employing a porous anodic aluminum oxide template-assisted electrodeposition method, we successfully prepared Ni nanowire arrays. Importantly, the growth direction of Ni nanowire arrays can be controlled by varying the current densities. The crystalline and growth orientation of Ni nanowire arrays show effects on magnetic properties. Single-crystallinity Ni nanowires with [110] orientation show the best magnetic properties, including coercivity and squareness, along the parallel direction of the nanowire axis. The current preparation strategy can be used to obtain other nanowire arrays (such as metal, alloy, and semiconductor) with controlled growth direction in confined space, and is therefore of broad interest for different applications.

Magnetic Behaviors of BaTiO3-BaFe12O19 Nanocomposite Prepared by Sol-Gel Process Based on Differences in Volume Fraction

2013 ◽  
Vol 789 ◽  
pp. 118-123 ◽  
Author(s):  
Dwita Suastiyanti ◽  
Bambang Soegijono ◽  
M. Hikam
Keyword(s):  
Magnetic Properties ◽  
Volume Fraction ◽  
Sol Gel ◽  
Barium Hexaferrite ◽  
Multiferroic Material ◽  
Raw Material ◽  
Spintronic Devices ◽  
Phase Study ◽  
Sol Gel Process ◽  
Potential Applications

Barium titanate BaTiO3 (BTO) - barium hexaferrite BaFe12O19 (BHF) nanocomposite could be as a raw material of multiferroic. Multiferroic is a class of materials with coupled electric, magnetic and structural order parameters that yield simultaneous effects of ferroelectric, ferromagnetism and ferroelasticity in the same material. This material has potential applications in such as spintronic devices and sensors. This work was an earlier research towards formation of multiferroic material. Knowing magnetic properties that will lead to a better understanding of magnetoelectric coupling in multiferroic material is the objective of this research.The samples were BTO and BHF prepared by sol-gel and then were mixed in bulk system by a conventional techniques in various of volume fraction between BTO : BHF = 1:1 ; 1:2 and 2:1, then samples were sintered at 925°C for 5, 10 and 15 hours. Composite phase study was carried out using X-Ray Diffraction (XRD). MPS Magnet Physik EP3 Permagraph L was used to characterize magnetic properties. XRD results confirm that composite with volume fraction of BTO : BHF = 1:1 with sintering at 925°C for 5 hours consists only of 2 phases BTO and BHF. There is impurity phase BaFe2O4 beside BTO and BHF phases at samples with volume fraction BTO:BHF = 1:2 and 2:1 for longer sintering. Composite with volume fraction of BTO:BHF = 1:1 for 5 hours sintering has a high value of remanent magnetization 0.081 T and the lowest value of intrinsic coersive 333.6 kA/m leading to good characteristics of multiferroic materials.

Ferromagnetic Resonance Biosensor for Homogeneous and Volumetric Detection of DNA

2017 ◽  
Author(s):  
Bo Tian ◽  
Peter Svedlindh ◽  
Mattias Strömberg ◽  
Erik Wetterskog
Keyword(s):  
Magnetic Nanoparticles ◽  
Ferromagnetic Resonance ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Rolling Circle Amplification ◽  
Resonance Field ◽  
Isothermal Amplification ◽  
Detection Sensitivity ◽  
Serum Samples ◽  
Rolling Circle

In this work, we demonstrate for the first time, a ferromagnetic resonance (FMR) based homogeneous and volumetric biosensor for magnetic label detection. Two different isothermal amplification methods, <i>i.e.</i>, rolling circle amplification (RCA) and loop-mediated isothermal amplification (LAMP) are adopted and combined with a standard electron paramagnetic resonance (EPR) spectrometer for FMR biosensing. For RCA-based FMR biosensor, binding of RCA products of a synthetic Vibrio cholerae target DNA sequence gives rise to the formation of aggregates of magnetic nanoparticles. Immobilization of nanoparticles within the aggregates leads to a decrease of the net anisotropy of the system and a concomitant increase of the resonance field. A limit of detection of 1 pM is obtained with an average coefficient of variation of 0.16%, which is superior to the performance of other reported RCA-based magnetic biosensors. For LAMP-based sensing, a synthetic Zika virus target oligonucleotide is amplified and detected in 20% serum samples. Immobilization of magnetic nanoparticles is induced by their co-precipitation with Mg<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (a by-product of LAMP) and provides a detection sensitivity of 100 aM. The fast measurement, high sensitivity and miniaturization potential of the proposed FMR biosensing technology makes it a promising candidate for designing future point-of-care devices.<br>

Effect of Thickness on Mechanically Tunable Magnetic Anisotropy of FeGa Thin Films Deposited on Flexible Substrates

2015 ◽  
Vol 815 ◽  
pp. 227-232 ◽  
Author(s):  
Ying Yu ◽  
Shu Hong Xie ◽  
Qing Feng Zhan
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Magnetic Anisotropy ◽  
Effective Strain ◽  
Anisotropy Field ◽  
Saturation Field ◽  
Effective Anisotropy ◽  
Magnetostriction Constant ◽  
The Difference ◽  
Different Strains

A practical way to manipulate the magnetic anisotropy of magnetostrictive FeGa thin films grown on flexible polyethylene terephthalate (PET) substrates is introduced in this study. The effect of film thickness on magnetic properties and magnetostriction constant of polycrystalline FeGa thin films was investigated. The anisotropy field Hk of flexible FeGa films, i.e., the saturation field determined by fitting the hysteresis curves measured along the hard axis, was enhanced with increasing the tensile strain applied along the easy axis of the thin films, but this enhancement via strain became unconspicuous with increasing the thickness of FeGa films. In order to study the magnetic sensitivity of thin films responding to the external stress, we applied different strains on these films and measure the corresponding anisotropy field. Moreover, the effective magnetostriction constant of FeGa films was calculated from the changes of both anisotropy field and external strain based on the Villari effect. A Neel’s phenomenological model was developed to illustrate that the effective anisotropy field of FeGa thin films was contributed from both the constant volume term and the inverse thickness dependent surface term. Therefore, the magnetic properties for the volume and surface of FeGa thin films were different, which has been verified in this work by using vibrating sample magnetometer (VSM) and magneto-optic Kerr effect (MOKE) system. The anisotropy field contributed by the surface of FeGa film and obtained by MOKE is smaller than that contributed by the film volume and measured by VSM. We ascribed the difference in Hk to the relaxation of the effective strain applied on the films with increasing the thickness of films.

Intriguing Strain-Governed Magnetic Phase Transitions in 2D Vanadium Porphyrin Sheet

2022 ◽  
Author(s):  
Qi Wang ◽  
Zhilu Zhang ◽  
Hai-Cai Huang ◽  
Xinyu song ◽  
Yuxiang Bu
Keyword(s):  
Magnetic Properties ◽  
Phase Transitions ◽  
Magnetic Phase ◽  
2D Materials ◽  
Magnetic Phase Transitions ◽  
Strain Effect ◽  
Magnetic Response ◽  
Two Dimensional ◽  
Spintronic Devices ◽  
Electronic And Magnetic Properties

The strain effect on the magnetic response of the 2D materials as spintronic devices are always important in actual applications. Due to the intriguing electronic and magnetic properties of two-dimensional...

scholarly journals Ferromagnetic resonance, transverse bias initial inverse susceptibility and torque studies of magnetic properties of Co2MnSi thin films

2013 ◽  
Vol 40 ◽  
pp. 18001
Author(s):  
M. Belmeguenai ◽  
H. Tuzcuoglu ◽  
D. Berling ◽  
S.M. Chérif ◽  
Y. Roussigné ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Ferromagnetic Resonance ◽  
Inverse Susceptibility

Magnetization switching by magnon-mediated spin torque through an antiferromagnetic insulator

Science ◽  
2019 ◽  
Vol 366 (6469) ◽  
pp. 1125-1128 ◽  
Author(s):  
Yi Wang ◽  
Dapeng Zhu ◽  
Yumeng Yang ◽  
Kyusup Lee ◽  
Rahul Mishra ◽  
...  
Keyword(s):  
Spin Transfer Torque ◽  
Spin Transfer ◽  
Spin Torque ◽  
Local Magnetization ◽  
Magnetization Switching ◽  
Spintronic Devices ◽  
Magnetic Devices ◽  
Alternative Approach ◽  
Efficient Control ◽  
Electrical Spin

Widespread applications of magnetic devices require an efficient means to manipulate the local magnetization. One mechanism is the electrical spin-transfer torque associated with electron-mediated spin currents; however, this suffers from substantial energy dissipation caused by Joule heating. We experimentally demonstrated an alternative approach based on magnon currents and achieved magnon-torque–induced magnetization switching in Bi2Se3/antiferromagnetic insulator NiO/ferromagnet devices at room temperature. The magnon currents carry spin angular momentum efficiently without involving moving electrons through a 25-nanometer-thick NiO layer. The magnon torque is sufficient to control the magnetization, which is comparable with previously observed electrical spin torque ratios. This research, which is relevant to the energy-efficient control of spintronic devices, will invigorate magnon-based memory and logic devices.

Synthesis and Magnetic Properties of Nanocrystalline Co-Ni Alloys: A Review

2012 ◽  
Vol 736 ◽  
pp. 229-240 ◽  
Author(s):  
Sudhakar Panday ◽  
P. Jeevanandam ◽  
B.S. Sunder Daniel
Keyword(s):  
Magnetic Properties ◽  
Binary Alloys ◽  
Synthesis Method ◽  
Surface Oxidation ◽  
Alloy Nanoparticles ◽  
Ni Alloys ◽  
Alloy Particles ◽  
Ni Alloy ◽  
Co Concentration ◽  
Potential Applications

This review article deals with the synthesis, characterization and magnetic properties of Co-Ni nanoalloys. The various physical and chemical methods for the synthesis of Co-Ni alloy nanoparticles are discussed. Co-Ni alloy nanoparticles with different size and shape such as spherical, rods, wires chain-like assembly are found to depend on the synthesis method and experimental condition. The structure of Co-Ni alloys is eitherfcc,hcpor mixedfccandhcpphase and found to depends on size, shape and concentration of Co in the Co-Ni alloys. Sodium hydroxide (NaOH) concentration and Co to Ni ratio influence the shape of bimetallic Co-Ni nanoparticles. Pt nucleating agents produced smaller size of Co-Ni alloy particles compared to Ru and Ag. Higher Co concentration in the Co-Ni alloys also influences the size alloy particles. The magnetic properties of Co-Ni nanoalloys depend on the size, shape and composition of the binary alloys. Surface oxidation of Co-Ni alloy nanoparticles decrease the saturation magnetization and increases with Co concentration in the alloys. The shape of Co-Ni alloy nanoparticles has an influence on coercivity. The microwave absorption properties of the Co-Ni alloys found to depend on the shape, size and composition of the binary alloys. The absorbance peaks shifts to higher frequency with decrease in size of the alloy particles. Potential applications of Co-Ni alloys in various fields are highlighted.

scholarly journals Ab-Initio Study of the Electronic and Magnetic Properties of Boron- and Nitrogen-Doped Penta-Graphene

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 816 ◽  
Author(s):  
Chao Zhang ◽  
Yu Cao ◽  
Xing Dai ◽  
Xian-Yong Ding ◽  
Leilei Chen ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Charge Transfer ◽  
First Principles ◽  
Magnetic Moments ◽  
First Principles Calculations ◽  
Electronic Band ◽  
Magnetic Devices ◽  
Spin Polarized ◽  
Electronic Band Gap ◽  
Transfer Mechanisms

First-principles calculations were performed to investigate the effects of boron/nitrogen dopant on the geometry, electronic structure and magnetic properties of the penta-graphene system. It was found that the electronic band gap of penta-graphene could be tuned and varied between 1.88 and 2.12 eV depending on the type and location of the substitution. Moreover, the introduction of dopant could cause spin polarization and lead to the emergence of local magnetic moments. The main origin of the magnetic moment was analyzed and discussed by the examination of the spin-polarized charge density. Furthermore, the direction of charge transfer between the dopant and host atoms could be attributed to the competition between the charge polarization and the atomic electronegativity. Two charge-transfer mechanisms worked together to determine which atoms obtained electrons. These results provide the possibility of modifying penta-graphene by doping, making it suitable for future applications in the field of optoelectronic and magnetic devices.

Sign in / Sign up

Export Citation Format

Share Document