scholarly journals Geological Mapping of Rates and São Félix of Laúndos Region (Northern Portugal)

2021 ◽  
Vol 906 (1) ◽  
pp. 012120
Author(s):  
Paula Amorim ◽  
Helena Couto
Keyword(s):  
Spatial Planning ◽  
Volcanic Rocks ◽  
Optical Microscope ◽  
Geological Mapping ◽  
Upper Ordovician ◽  
Middle Ordovician ◽  
Northern Portugal ◽  
Lithostratigraphic Units ◽  
First Time ◽  
Stratigraphic Succession

Abstract The Rates and São Félix of Laúndos region is located in the NW extension of the Valongo Anticline (Northern Portugal), comprising Palaeozoic formations with ages ranging from the Cambrian to the Carboniferous, locally overlaid by Plio-Pleistocene beach deposits and dunes. Detailed geological mapping was developed. The fieldwork allowed distinguishing different lithostratigraphic units, some of them fossiliferous. The study under optical microscope and Scanning Electron Microscope (SEM) allowed noting the presence of volcanic rocks along the Palaeozoic succession. A rhyolite in the Cambrian - Ordovician transition, a likely ignimbrite in the Upper Ordovician, and the existence of a porphyry in the Carboniferous, were for the first time identified in this region. The palaeontological study focuses on the samples collected in the field, essentially belonging to the Middle Ordovician (Valongo Formation), but also to Silurian and Carboniferous. The Devonian formations are largely covered by agricultural fields and by urbanization, not allowing the collect of fossils, so the Devonian fossils studied belong to the Stratigraphical and Palaeontological Collection of the Department of Geosciences, Environment and Spatial Planning, Faculty of Sciences, University of Porto. The geological mapping previously developed in this region goes back to the XX century. In the present work a detailed geological mapping at a scale of 1:15 000 was developed, with reinterpretation of the stratigraphic succession.

Oxygen isotope (δ18O) trends measured from Ordovician conodont apatite using secondary ion mass spectrometry (SIMS): Implications for paleo-thermometry studies

2021 ◽  
Author(s):  
Cole T. Edwards ◽  
Clive M. Jones ◽  
Page C. Quinton ◽  
David A. Fike
Keyword(s):  
Mass Spectrometry ◽  
Secondary Ion Mass Spectrometry ◽  
Matrix Effects ◽  
Analytical Techniques ◽  
Upper Ordovician ◽  
Bulk Analysis ◽  
Middle Ordovician ◽  
Ion Mass Spectrometry ◽  
Oxygen Isotopic ◽  
Secondary Ion

The oxygen isotopic compositions (δ18O) of minimally altered phosphate minerals and fossils, such as conodont elements, are used as a proxy for past ocean temperature. Phosphate is thermally stable under low to moderate burial conditions and is ideal for reconstructing seawater temperatures because the P-O bonds are highly resistant to isotopic exchange during diagenesis. Traditional bulk methods used to measure conodont δ18O include multiple conodont elements, which can reflect different environments and potentially yield an aggregate δ18O value derived from a mixture of different water masses. In situ spot analyses of individual elements using micro-analytical techniques, such as secondary ion mass spectrometry (SIMS), can address these issues. Here we present 108 new δ18O values using SIMS from conodont apatite collected from four Lower to Upper Ordovician stratigraphic successions from North America (Nevada, Oklahoma, and the Cincinnati Arch region of Kentucky and Indiana, USA). The available elements measured had a range of thermal alteration regimes that are categorized based on their conodont alteration index (CAI) as either low (CAI = 1−2) or high (CAI = 3−4). Though individual spot analyses of the same element yield δ18O values that vary by several per mil (‰), most form a normal distribution around a mean value. Isotopic variability of individual spots can be minimized by avoiding surficial heterogeneities like cracks, pits, or near the edge of the element and the precision can be improved with multiple (≥4) spot analyses of the same element. Mean δ18O values from multiple conodonts from the same bed range between 0.0 and 4.3‰ (median 1.0‰), regardless of low or high CAI values. Oxygen isotopic values measured using SIMS in this study reproduce values similar to published trends, namely, δ18O values increase during the Early−Middle Ordovician and plateau by the mid Darriwilian (late Middle Ordovician). Twenty-two of the measured conodonts were from ten sampled beds that had been previously measured using bulk analysis. SIMS-based δ18O values from these samples are more positive by an average of 1.7‰ compared to bulk values, consistent with observations by others who attribute the shift to carbonate- and hydroxyl-related SIMS matrix effects. This offset has implications for paleo-temperature model estimates, which indicate that a 4 °C temperature change corresponds to a 1‰ shift in δ18O (‰). Although this uncertainty precludes precise paleo-temperature reconstructions by SIMS, it is valuable for identifying spatial and stratigraphic trends in temperature that might not have been previously possible with bulk approaches.

Mapping faults in an urban environment from borehole data (Oviedo, NW Spain)

2021 ◽  
Author(s):  
Luis Pando ◽  
Carlos López-Fernández ◽  
Germán Flor-Blanco ◽  
Sergio Llana-Fúnez
Keyword(s):  
Site Investigation ◽  
Geological Mapping ◽  
City Centre ◽  
Nw Spain ◽  
Regional Literature ◽  
Borehole Data ◽  
Urban Core ◽  
Structural Relationships ◽  
Geotechnical Database ◽  
Lithostratigraphic Units

<p>The detailed geological mapping in built-up areas presents challenges that arise mainly from the covering of outcrops, and the erase of natural geomorphological features during earthmoving works related to urban development. However, it also benefits from the existence of closely spaced site investigation data, including boreholes, not commonly available outside the cities.</p><p>This contribution explains the procedure carried out to improve the interpretation of faults below the city centre of an urban core located in NW Spain. Oviedo is placed on a basin formed by an alternation of sub-horizontal carbonate and siliciclastic formations of Cretaceous age, over which lies an unconformable cover of Paleogene fluvial-lacustrine deposits mostly composed by clays and marls. The paleorelief over which the Paleogene was deposited results in great lateral changes in the thickness of these sediments. Moreover, the basin was deformed during the Alpine convergence in northern Iberia developing an open syncline oriented East-West. During the shortening, a number of minor faults cutting across the gently dipping Cretaceous and Paleogene deposits affect moderately the cartographic pattern of lithostratigraphic units.</p><p>Therefore, this research was focused on the preferential use of information on the ground provided by hundreds of rotary boreholes managed through a GIS-type geotechnical database. The procedure of semiautomatic identification consisted essentially of investigating the spatial variations of the boundary between two Cretaceous formations, in order to find anomalies attributable to fault displacements. In using this boundary as a strain marker for post-depositional deformation, two scales were approached, one aimed at the identification of large faults, and another with greater detail based on trend-surface analysis for fractures of smaller size and local incidence (vertical offset less than 10 m).</p><p>The research has allowed to discuss faults deduced in previous geological maps, helping to interpret thickenings related to the paleorelief, and also to recognize the existence of structures not described in the regional literature. This study provides also better constrains to the analysis of the structural relationships between the faults affecting the Mesozoic-Palaeogene basin, and the Alpine reactivation of the underlying Palaeozoic basement.</p>

Volcanoes geological mapping and structural geology with UAS High Resolution Digital Terrain Model : the Kuei-Shan Tao case example (Eastern Taiwan).

2021 ◽  
Author(s):  
Benoit Deffontaines ◽  
Kuo-Jen Chang ◽  
Samuel Magalhaes ◽  
Gérardo Fortunato
Keyword(s):  
High Resolution ◽  
Okinawa Trough ◽  
Volcanic Rocks ◽  
Digital Terrain Model ◽  
Structural Features ◽  
Point Of View ◽  
Geological Mapping ◽  
Lava Flows ◽  
Aerial Photographs ◽  
Structural Scheme

<p>Volcanic areas in the World are often difficult to map especially in a structural point of view as (1) fault planes are generally covered and filled by more recent lava flows and (2) volcanic rocks have very few tectonic striations. Kuei-Shan Tao (11km from Ilan Plain – NE Taiwan) is a volcanic island, located at the soutwestern tip of the South Okinawa trough (SWOT). Two incompatible geological maps had been already published both lacking faults and structural features (Hsu, 1963 and Chiu et al., 2010). We propose herein not only to up-date the Kuei-Shan Tao geological map with our high resolution dataset, but also to create the Kuei-Shan Tao structural scheme in order to better understand its geological and tectonic history.</p><p>Consequently, we first acquired aerial photographs from our UAS survey and get our new UAS high resolution DTM (HR UAS-DTM hereafter) with a ground resolution <10cm processed through classical photogrammetric methods. Taking into account common sense geomorphic and structural interpretation and reasoning deduced form our HR UAS-DTM, and the outcropping lithologies situated all along the shoreline, we have up-dated the Kuei-Shan Tao geological mapping and its major structures. To conclude, the lithologies (andesitic lava flows and pyroclastic falls) and the new structural scheme lead us to propose a scenario for both the construction as well as the dismantling of Kuei-Shan Tao which are keys for both geology and geodynamics of the SWOT.</p>

Age, chemistry, and tectonic setting of Miramichi terrane (Early Paleozoic) volcanic rocks, eastern and east-central Maine, USA

2021 ◽  
Vol 57 ◽  
pp. 239-273
Author(s):  
Allan Ludman ◽  
Christopher McFarlane ◽  
Amber T.H. Whittaker
Keyword(s):  
New Brunswick ◽  
Subduction Zone ◽  
Tectonic Setting ◽  
Volcanic Rocks ◽  
Calc Alkaline ◽  
East Central ◽  
Arc Volcanism ◽  
Middle Ordovician ◽  
Volcanic Suite ◽  
Back Arc

Volcanic rocks in the Miramichi inlier in Maine occur in two areas separated by the Bottle Lake plutonic complex: the Danforth segment (Stetson Mountain Formation) north of the complex and Greenfield segment to the south (Olamon Stream Formation). Both suites are dominantly pyroclastic, with abundant andesite, dacite, and rhyolite tuffs and subordinate lavas, breccias, and agglomerates. Rare basaltic tuffs and a small area of basaltic tuffs, agglomerates, and lavas are restricted to the Greenfield segment. U–Pb zircon geochronology dates Greenfield segment volcanism at ca. 469 Ma, the Floian–Dapingian boundary between the Lower and Middle Ordovician. Chemical analyses reveal a calc-alkaline suite erupted in a continental volcanic arc, either the Meductic or earliest Balmoral phase of Popelogan arc activity. The Maine Miramichi volcanic rocks are most likely correlative with the Meductic Group volcanic suite in west-central New Brunswick. Orogen-parallel lithologic and chemical variations from New Brunswick to east-central Maine may result from eruptions at different volcanic centers. The bimodal Poplar Mountain volcanic suite at the Maine–New Brunswick border is 10–20 myr younger than the Miramichi volcanic rocks and more likely an early phase of back-arc basin rifting than a late-stage Meductic phase event. Coeval calc-alkaline arc volcanism in the Miramichi, Weeksboro–Lunksoos Lake, and Munsungun Cambrian–Ordovician inliers in Maine is not consistent with tectonic models involving northwestward migration of arc volcanism. This >150 km span cannot be explained by a single east-facing subduction zone, suggesting more than one subduction zone/arc complex in the region.

scholarly journals New data on the ecological peculiarities and the distribution in Bulgaria of the vulnerable habitat F3.1d Balkan-Anatolian submontane genistoid scrub from the European Red List of Habitats

Hacquetia ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 271-287
Author(s):  
Georgi Kunev ◽  
Rossen Tzonev
Keyword(s):  
Vegetation Type ◽  
Volcanic Rocks ◽  
Habitat Type ◽  
Life Forms ◽  
Plant Life Forms ◽  
Area Of Occupancy ◽  
Floristic Elements ◽  
First Time ◽  
Floristic Structure ◽  
East Mediterranean Region

Abstract The study presents new data on the habitat dominated by the species complex of Genista lydia/G. rumelica in Bulgaria. It is based on 129 phytocoenological relevés and provides information on the chorology, ecology and floristic structure of these communities. This habitat type occupies substrates composed by different volcanic rocks. The floristic structure is very rich in species. The phytogeographical relationships with the East Mediterranean region are considerable, which is proved by the high occurrence of floristic elements with Mediterranean or sub-Mediterranean origin. The plant life-forms analysis demonstrates that the therophytes, geophytes and chamephytes prevail in their floristic structure, which is also typical for the shrub communities in this region. During the field study this vegetation type has been mapped and its total area of occupancy has been calculated. For a first time it is proposed this habitat to be divided into three habitat sub-types due to the established differences in the environmental factors. Some recommendations have been proposed on the conservation management and also complements on the habitat‘s descriptions in EUNIS habitat classification.

scholarly journals Remote predictive geological mapping as a tool for the reconstruction of the complex geodynamic evolution of Melanesia

2020 ◽  
Author(s):  
Philipp Brandl ◽  
Anna Kraetschell ◽  
Justin Emberley ◽  
Mark Hannington ◽  
Margaret Stewart ◽  
...  
Keyword(s):  
Large Scale ◽  
Solomon Islands ◽  
Sedimentary Cover ◽  
Complete Information ◽  
Geological Mapping ◽  
Geophysical Data ◽  
Geodynamic Evolution ◽  
Predictive Mapping ◽  
Lithostratigraphic Units ◽  
Geological Map

<p>The offshore regions of Eastern Papua New Guinea and the Solomon Islands include several active and remnant arc and backarc systems that formed in response to complex plate tectonic adjustments following subduction initiation in the Eocene. Although there has been extensive exploration for offshore petroleum resources, and more than 54 research cruises have investigated or transited the region since 1993, a comprehensive regional geological map, including the deep marine areas, has not been available at a scale that permits quantitative analysis of the basin history. We present the first map that depicts interpreted assemblage- and formation-level lithostratigraphic units correlated across the marine basins and adjacent land masses. The mapped assemblages and large-scale formations are based on a compilation of land-based geological maps, marine geophysical data (hydroacoustics, magnetics, and gravity) integrated with the results of geological sampling, ocean drilling, seismic surveys, and seabed observations.</p><p>More than 400,000 km<sup>2 </sup>of the map area covered by ship-based multibeam and other geophysical data were inspected to derive the offshore geological units. In areas with limited data, the units were extrapolated from well-documented formations in adjacent regions with more complete information, including on land. This approach follows closely the techniques used for remote predictive mapping in other regions of the Earth where geological information is sparse. Geological boundaries were constrained by ship-based multibeam data reprocessed at 35-m to 50-m resolution and integrated with the Global Multi-Resolution Topography (GMRT) gridded at 100 m. Lithotectonic assemblages were assigned on the basis of plate structure, crustal type and thickness, age, composition, and sedimentary cover and further refined by bathymetric and geophysical data from the literature and cruise reports. The final compilation is generalized and presented here at 1:1 М. Our new approach integrates conventional mapping on land with remote predictive mapping of the ocean floor.</p><p>The newly compiled geological map illustrates the diversity of assemblages in the region and its complex geodynamic evolution. The resolution of our map allows to perform quantitative analyses of area-age relationships and thus crustal growth. Further geoscientific analyses may allow to estimate the regional mineral potential and to delineate permissive areas as future exploration targets.</p>

scholarly journals Geochemical features and formation conditions of Early-Devonian cherty-argillaceous shales and the underlying basalts in the Ishkildino section (eastern slope of the Southern Urals)

LITOSFERA ◽  
2019 ◽  
pp. 30-47
Author(s):  
A. M. Fazliakhmetov
Keyword(s):  
Volcanic Rocks ◽  
Southern Urals ◽  
Geochemical Data ◽  
Upper Ordovician ◽  
The Southern Urals ◽  
Geochemical Composition ◽  
Early Devonian ◽  
Ocean Ridges ◽  
Clay Shales ◽  
Conodont Zone

Research subject.The West Magnitogorsk zone of the Southern Urals in the vicinity of the Ishkildino village features a subaerially exposed basaltic sequence superposed by cherts and siliceous-clay shales. The basalts and the overlying shales are assumed to have formed during the Ordovician and Silurian (?)–Early Devonian (up to the conodont zone excavates inclusive) periods, respectively. The aim of this research was to reconstruct, using geochemical data, the conditions under which the rocks present in this geological location were formed.Materials and methods. Five samples of the basalts (XRD and ICP-MS methods), 27 samples of the siliceous-clay shales and 10 samples of the cherts (XRD and ICP-AES methods) were analyzed.Results.According to the ratio of SiO2, Na2O and K2O, the volcanic rocks from the lower part of the section are represented by basalts and trachybasalts. Their geochemical composition corresponds to the N-MORB and is established to be similar to that of the basalts in the Polyakovskaya formation (the Middle–Upper Ordovician). In terms of main elements, the shales under study consist of quartz and illite with a slight admixture of organic matter, goethite, quartzfeldspar fragments, etc. The degree of the sedimentary material weathering according to the CIA, CIW and ICV index values is shown to be moderate. The values of Strakhov’s and Boström’s moduli correspond to sediments without the admixture of underwater hydrothermal vent products. The values of Cr/Al, V/Al and Zr/Al correspond to those characteristic of deposits in deep-water zones remote from the coasts of passive and active continental margins, basalt islands and areas adjacent to mid-ocean ridges. For most samples, the values of Ni/Co, V/Cr, Mo/Mn are typical of deposits formed under oxidative conditions. However, several samples from the upper part of the section, which is comparable to the kitabicus and excavatus conodont zones, demonstrate the Ni/Co, V/Cr, and Mo/Mn values corresponding to deposits formed under reducing atmospheres. An assumption is made that the existence of these deposits can be associated with the Bazal Zlichov event.Conclusion.The investigated pre-Emsian shales have shown no signs of volcanic activity in the adjacent areas. The studied deposits are established to correspond to the central part of the Ural Paleoocean.

Maturation thermique et histoire de l'enfouissement et de la génération des hydrocarbures du bassin de l'archipel de Mingan et de l'île d'Anticosti, Canada

1990 ◽  
Vol 27 (6) ◽  
pp. 731-741 ◽  
Author(s):  
Rudolf Bertrand
Keyword(s):  
Carbonate Platform ◽  
Burial History ◽  
Upper Ordovician ◽  
Southeastern Part ◽  
Middle Ordovician ◽  
Oil Generation ◽  
Wide Range ◽  
History Of ◽  
Anticosti Island ◽  
Depth Of Burial

Carbonate platform sequences of Anticosti Island and the Mingan Archipelago are Early Ordovician to Early Silurian in age. With the exception of the Macasty Formation, the sequences are impoverished in dispersed organic matter, which is chiefly composed of zooclasts. Zooclast reflectances suggest that the Upper Ordovician and Silurian sequences outcropping on Anticosti Island are entirely in the oil window but that the Lower to Middle Ordovician beds of the Mingan Archipelago and their stratigraphic equivalents in the subsurface of most of Anticosti Island belong to the condensate zone. Only the deeper sequences of the southwestern sector of Anticosti Island are in the diagenetic dry-gas zone. The maximum depth of burial of sequences below now-eroded Silurian to Devonian strata increases from 2.3 km on southwestern Anticosti Island to 4.5 km in the Mingan Archipelago. A late upwarp of the Precambrian basement likely allowed deeper erosion of the Paleozoic strata in the vicinity of the Mingan Archipelago than on Anticosti Island. Differential erosion resulted in a southwestern tilting of equal maturation surfaces. The Macasty Formation, the only source rock of the basin (total organic carbon generally > 3.5%, shows a wide range of thermal maturation levels (potential oil window to diagenetic dry gas). It can be inferred from the burial history of Anticosti Island sequences that oil generation began later but continued for a longer period of geologic time in the northeastern part than in the southeastern part of the island. Oil generation was entirely pre-Acadian in the southern and western parts of Anticosti Island, but pre- and post-Acadian in the northern and eastern parts.

Shear zone development and structurally-controlled skarn ore mineralization in the Rosas district, SW Sardinia.

2021 ◽  
Author(s):  
Matteo Luca Deidda ◽  
Antonio Attardi ◽  
Fabrizio Cocco ◽  
Dario Fancello ◽  
Antonio Funedda ◽  
...  
Keyword(s):  
Shear Zone ◽  
Large Scale ◽  
Ore Deposits ◽  
Axial Plane ◽  
Contact Metamorphism ◽  
Upper Ordovician ◽  
Fold And Thrust Belt ◽  
Ore Mineralization ◽  
Map Scale ◽  
Stratigraphic Succession

<p>The Rosas Shear Zone (RSZ) is a 1 km thick brittle-ductile shear zone that outcrops in the Variscan fold and thrust belt foreland of SW Sardinia, where several important ore deposits were mined in the last century. The RSZ lies in the footwall and strikes parallel to the NE-dipping regional thrust that separates the Variscan foreland from the nappe zone. Two thrusts that developed along the limbs of two km-scale overturned antiforms, with NE-dipping axial plane, bound the RSZ. The folds show a SW-facing direction and a well-developed axial plane cleavage, and affect a lower Cambrian-upper Ordovician stratigraphic succession mainly made, from bottom to top, by a sequence about 200 m thick of dolostones and massive limestone followed by 50 m of marly limestones overlain by about 150 m of sandstones, pelites and siltstones, finally unconformable capped by conglomerates and siltstones, ranging in thickness from a few to 200 m. Differently, within the RSZ the bedding is completely transposed along the cleavage and its internal structure is characterized by anastomosing thrusts that affect the stratigraphic succession defining map-scale slices mainly consisting of dolostones and limestones embedded into the siliciclastic formations. It is noteworthy the occurrence of a NE-dipping, up to 100 m thick gabbro-dyke that postdates the deformation phases and that can be related to the exhumation of the chain during late Carboniferous-Permian times.</p><p>In the whole area, contact metamorphic and metasomatic processes selectively affected the Cambrian carbonate tectonic slices, originating several skarn-type orebodies. Mineralized rocks display the mineralogical assemblages and textures of Fe-Cu-Zn skarns, with relicts of anhydrous calcic phases related to the prograde metamorphic stage (garnet, clinopyroxene, wollastonite), frequently enclosed in a mass of hydrous silicates (actinolitic amphibole, epidote) and magnetite related to the retrograde metasomatic stage, in turn followed by chlorite, sulfides, quartz and calcite associated to the hydrothermal stage. Metasomatic reactions also involved mafic rocks, producing a mineral association marked by clinopyroxene, amphibole, epidote, prehnite and Ba-rich K-feldspar. Sulfide ores are made of prevailing sphalerite, chalcopyrite and galena, with abundant pyrite and pyrrhotite and minor tetrahedrite and Ag-sulfosalts. Garnets are andraditic/grossularitic, distinctly zoned and optically anisotropic. Field surveys pointed out the tight structural controls on skarn and ore formation. On a local scale, the gabbro emplacement along high- to low-angle NNW-SSE structures bordering the carbonate tectonic slices accentuate the effects of contact metamorphism, and metric to decametric mineralogical zonation (garnet→pyroxene→wollastonite) are recognized. On a larger scale, extensive hydrothermal fluid circulations involved the structures of the RSZ. Infilling of metasomatic fluids in carbonate tectonic slices is fault-controlled and aided by the increase in permeability due to the alteration of prograde silicates. The causative intrusion related to skarn ores belongs to the early Permian (289±1 Ma) ilmenite-series, ferroan granite suite which intrudes the RSZ about 3 km east from the studied area. The Fe-Cu-Zn skarn ores of Rosas are best interpreted as distal, structurally-controlled orebodies, connected to large-scale circulation of granite-related fluids in the km-sized plumbing system represented by the RSZ.</p>

Flexible crinoids from the Upper Ordovician Maquoketa Formation of the northern midcontinent and the evolution of early flexible crinoids

2001 ◽  
Vol 75 (2) ◽  
pp. 370-382 ◽  
Author(s):  
James C. Brower
Keyword(s):  
New Species ◽  
North America ◽  
Late Ordovician ◽  
Upper Ordovician ◽  
Middle Ordovician

Three flexible crinoids occur in the Upper Ordovician Maquoketa Formation of Illinois, Iowa, and Minnesota:Protaxocrinus girvanensisRamsbottom, 1961,Clidochirus anebosnew species, andProanisocrinus oswegoensis(Miller and Gurley, 1894).Protaxocrinus girvanensisis also found in the Upper Ordovician of Scotland which indicates that the ocean was narrow enough to allow at least one crinoid species to cross the barrier. The Upper Ordovician of North America and Scotland also share many common crinoid genera. Both phenetic and cladistic methods result in similar phylogenies of flexible crinoids.Protaxocrinuswas derived from a cupulocrinid ancestor during the Middle Ordovician.Clidochirusevolved fromProtaxocrinusor its ancestral stock prior to the Richmondian of the Late Ordovician. The RichmondianProanisocrinusand later anisocrinids are most closely related toClidochirusor its immediate predecessor. Thus, three major lineages of flexible crinoids,Protaxocrinus(taxocrinid group),Clidochirus(icthyocrinid), andProanisocrinus(anisocrinids and homalocrinids), appeared during the Ordovician. Despite their rarity during the Ordovician, all three flexible lineages survived the Latest Ordovician extinction, whereas their more abundant and successful cupulocrinid ancestors were eliminated.

Sign in / Sign up

Export Citation Format

Share Document