scholarly journals Statistical processing of the obtained data moment of inertia of the chopper soaked soybeans

Author(s):  
V Yu Frolov ◽  
G G Klasner ◽  
A M Spiridonov
1982 ◽  
Author(s):  
Carol Zahner ◽  
M. Stephen Kaminaka

1992 ◽  
Vol 31 (01) ◽  
pp. 18-28 ◽  
Author(s):  
C. Combi ◽  
G. Pozzi ◽  
R. Rossi ◽  
F. Pinciroli

Abstract:Many clinics are interested to use software packages in daily practice, but lack of integration of such packages seriously limits their scope. In practice this often entails switching between programs and interrupting the run of an individual program. A multi-task approach would not solve this problem as it would not eliminate the need to input the same data many times, as often occurs when using separate packages. The construction of a Multi-Service Medical Software package (MSx2) is described, which was also developed as an example of practical integration of some clinically relevant functions. The package runs on a personal computer in an MS-DOS environment and integrates a time-oriented medical record management unit (TOMRU) for data of ambulatory patients, and a drug information management unit (DIMU) concerning posology, content, effects, and possible interactions. Of the possible database configurations allowed by MSx2, the cardiology patient database (MSx2/C) and hypertensive patient database (MSx2/H) were developed and described here. Clinical information to be included in the configurations was obtained after discussion and consensus of clinical practitioners. MSx2/C was distributed to several hundred clinical centers during computerized courses to train future users. MSx2 can easily transfer patient data to statistical processing packages.


Author(s):  
Sergey Kovalenko

The management of surface watercourses is an urgent scientific task. The article presents the results of statistical processing of long-term monthly data of field observations of hydrological and hydrochemical parameters along the Upper Yerga small river in the Vologda region. Sampling estimates of statistical parameters are obtained, autocorrelation and correlation analyzes are performed. The limiting periods from the point of view of pollution for water receivers receiving wastewater from drained agricultural areas are identified.


Author(s):  
Yuriy Spirin ◽  
Vladimir Puntusov

In the Kaliningrad region there are about 70 % of all polder lands in Russia. On these lands with high potential fertility, it is advisable to intensive agriculture. The area for the average moisture year is an area with excessive moisture, which indicates the need to maintain the rate of drainage on agricultural land. Many different factors play a role in ensuring the drainage rate, one of which is pumping stations and pumping equipment installed on them. An important parameter in the use of pump-power equipment is energy consumption, since in this industry it is a considerable expense item. Improving the energy efficiency of pumping stations on polders is a pressing issue today. At the majority of polder pumping stations, domestic power pumping equipment is installed with excess power and head of 4–8 meters, and a new one is selected based on the maximum possible head in a given place. In the Kaliningrad region, the energy efficiency of polder pumping equipment has never been analyzed. In this paper, a statistical processing of the geodesic pressure of water at the polder pumping stations of the Slavsk region for 2000–2002 was carried out. On the basis of these data and data on the hydraulic characteristics of pressure pipelines, the calculated water pressures were determined for the rational selection of pumping equipment. The calculation of the economic efficiency of pumps with optimal power compared with pumps of excess capacity. The results of the study can serve as a justification for the transition to the pumping equipment with less power and pressure, which will lead to a decrease in the cost of money for electricity.


2019 ◽  
Vol 85 (7) ◽  
pp. 73-82
Author(s):  
Vladimir O. Tolcheev

The issues of organizing an expert survey and carrying out statistical processing and analysis of the results are considered. The experts are the fifth-year students undergoing training at the Department of Management and Informatics «Moscow Power Engineering Institute» of the National Research University. The goal of the survey is revealing the disciplines that are most useful for employment in their specialty. We discuss the special features of the survey and a concept of «work in the specialty», with due regard for statistical reliability of the results. Data of written questionnaire gained in 2018 were processed and analyzed using cluster analysis (construction of dendrograms and application of the K-means method) and non-parametric statistical criteria (Friedman and Mann – Whitney – Wilcoxon). Data processing is implemented in the program STATISTICA. The analysis is carried out to reveal significant differences between the educational courses and assess the degree of consistency of the respondents to divide them into clusters that unite the students with similar judgments. Data analysis revealed that experts’ estimates in 2018 are in fairly good agreement with the estimates of previous studies; among the respondents there are three coalitions corresponding to the training modules «Software», «Management Theory», «Data Analysis»; the overall consistency of students in the two groups is very low (and, on the contrary, high in the identified clusters); grades are homogeneous and do not depend on training groups (and employment – unemployment of the respondents). The obtained results allow us to address a number of important questions regarding the ways of improving the educational process, e.g., to optimize yearly course hours for different educational modules.


2016 ◽  
Vol 52 ◽  
pp. 128-133
Author(s):  
I. V. Khatko ◽  
A. O. Onyshchenko ◽  
V. O. Vovk ◽  
T. M. Konks

The modern state of social-economic processes development demands increasing the level of food safety of the state, especially providing population by the high quality foods of domestic production, specifically by pork. One of criteria for estimating pigs' meatness is determining the fat thickness in different points of a trunk. The informative content of measuring in different parts of a trunk is different and it needs detailed study. The fat thickness is the most common as trait for pigs' meatness in the practice of pig breeding because it has high correlation with meat yield in carcasses. The aim of our research was the comparative study of fat deposition regularities in different parts of a trunk of Large White and Mirgorod pigs in different age periods. For conducting researches 24 pigs of both breeds with average live weight about 40 kg and at age not more 4 months were selected. The fat thickness was measured at live animals using ultrasonic device Draminski in such points: on withers, the level of the 6-7th thoracic vertebra, the level of the 1st-2nd loins vertebra and sacrum. Measuring the fat thickness was carried out at the age of 4, 5, 6, 7 and 8 months. During researches it was carried out the statistical processing of obtained material. Reliability of obtained indexes of productivity was determined. Regularities of formatting fat thickness and fat deposition rate depending on the age were studied. For the results of researches it has been studied and compared economically valuable traits of the most spread domestic pigs of Large White and Mirgorod breeds. By comparative study of growth and development of young pigs of experimental and control groups it has been found that animals of Large White breed differed by lesser fat deposits in all points of measuring. Thus, at 6-months’ age they had lesser thickness of fat in all parts of a trunk. More expressed tendency was at withers and the level of the 6-7th thoracic vertebra, at that in the first case the difference between groups was reliable (p < 0.01). The fat deposition rate in young pigs of both breeds was not the same in different points of measuring along a trunk. Above mentioned tendencies were intensified with the age. Purebred animals of intrabreed type LW-1 at 7-months’ age had reliable less thickness of fat in comparison with the control group: on withers (p < 0.01), at the level of the 6-7th thoracic vertebra, the level of the 1st-2nd loins vertebra (p < 0.05) and on sacrum (p < 0.01). In future, according to economic and scientific expediency, the animals of Mirgorod breed were excluded from the experiment. Concerning Large White breed, the researches were finished when animals were at 8 months’ age. The process of fat deposition in Large White pigs was less intensive in comparison to Mirgorod breed. The highest relative rate of fat thickness increase in both breeds was observed at the level of the 1st-2nd loins vertebra. By statistical processing of the obtained materials it has been found that the difference of average arithmetical indexes (as absolute and relative) between the experimental and control groups during growth and development had distinct tendency to increasing in all points of measuring. The reliability of the difference between the averages in groups with the age of animals increased. A higher reliability of data was obtained at measuring of the front parts of a trunk of pigs at the level of the 6th-7th thoracic vertebra and on withers. The carried out researches at all points of measuring give the reason to confirm that the fat deposits of Large White pigs are less comparing to Mirgorod breed. Conclusions. 1. Carcasses of animals of intrabreed type ULW-1 are comparatively more technologically suitable and economically beneficial for agricultural proceeding industry. 2. Animals of intrabreed type ULW-1 at 7-months’ age had reliable less thickness of fat in comparison with the control group: on withers, at the level of the 6-7th thoracic vertebra, the level of the 1st-2nd loins vertebra and on sacrum. 3. The process of fat deposition in Large White pigs was less intensive in comparison to Mirgorod breed.


Author(s):  
Anastasiya G. Khotuleva ◽  
Mariya S. Kozyreva

Introduction. The most susceptible to lead is the hematopoietic system of hematopoietic organs due to lead inhibition of heme and globin synthesis and cytotoxic effect on the membrane of Mature red blood cells. The aim of study was to evaluate the informative value of the study of erythrocyte and reticulocyte parameters determined on modern hematological analyzers in patients working in contact with lead during medical and biological monitoring. Materials and methods. 45 employees of the lead battery processing plant and 30 persons of control group were examined. The level of lead in the blood was determined by atomic absorption spectrometry, δ-ALA in the urine-by the reaction of pyrol formation with acetylacetone in terms of gram of creatinine, the study of hematological parameters was performed on a Sysmex HT-2000i analyzer. Statistical processing of the results was performed using the program STATISTICA 10.0. Results. Significant changes in erythrocytic (RDW) and reticulocytic (RET, IRF, LFR, MFR, HFR, RET-He) parameters, erythropoietin in workers in contact with lead compared to the control group, changes in MCV, MCH, RDW, RET indicators in the group working in dynamics after 2 years were revealed. Associations of hematological parameters with biomarkers of exposure and effect (lead level in blood and ALA in urine) were revealed. Conclusions. Assessment of erythrocyte (MCV, MCH, RDW) and reticulocyte parameters (RET% and their distribution by maturity) in dynamics during periodic medical examinations of workers in contact with lead allows us to detect the development of hematological disorders at early stages.


2020 ◽  
pp. 64-75
Author(s):  
E. Burleva ◽  
O. Smirnov ◽  
S. Tyurin

The purpose of the study was to conduct a comparative assessment of the course of the postoperative period after phlebectomy and thermal ablation in patients with varicose veins of the lower extremities in the system of the great saphenous vein (GSV) with class C2 of chronic venous insufficiency (CVI) — CEAP class C2. Materials and methods: 455 patients (455 limbs) with CEAP class C2. Group 1 (n = 154) received stripping + minimally invasive phlebectomy; Group 2 — endovenous laser ablation (EVLA) of GSV trunk + sclerotherapy of varicose veins; 3 group (n = 150) — radiofrequency ablation (RFA) of the GSV + sclerotherapy. All patients were united by a single tactical solution — the elimination of pathological vertical reflux in GSV. In each group, patients were with similar hemodynamic profile were selected (Group 1 = 63; Group 2 = 61; Group 3 = 61). The course of the postoperative period (from 2 days to 2 months) was compared for pain (visual analog scale — VAS), clinical symptoms of chronic venous insufficiency, degree of satisfaction (Darvall questionnaire), and duration of disability. Statistical processing was carried out using Excel programs for Windows XP, MedCalc® (version 11.4.2.0., Mariakerke, Belgium). Results: Postoperative pain is more pronounced (during day 1 for Group 1–4.0, Group 2–3.0, Group 3–2.0) and more prolonged (up to 4 days) after open surgeries (p < 0.05). The dynamics of the clinical symptoms of CVI (including varicose syndrome and use of compression therapy) could not be fully evaluated in connection with the ongoing sclerotherapy procedures for patients of Groups 2 and 3. Satisfaction of patients with aesthetic aspects was higher than expected in all groups. Reliable statistical differences proved decrease in days of disability (Group 1–14; Group 2–4; Group 3–3) and earlier return to physical activities and work in patients after thermal ablation in comparison with phlebectomy. Conclusion: The study shows that all three methods for eliminating vertical reflux in the GSV can be proposed for a large category of patients with CEAP of class C3 and C2. Medical and social rehabilitation of patients using endovascular thermal ablation technologies proceeds faster, which is beneficial both for the patients and for society.


Sign in / Sign up

Export Citation Format

Share Document