Eucalyptus grandis Response to Calcium Fertilization in Colombia

2021 ◽  
Author(s):  
Zach S Grover ◽  
Rachel L Cook ◽  
Marcela Zapata ◽  
J Byron Urrego ◽  
Timothy J Albaugh ◽  
...  
Keyword(s):  
Organic Matter ◽  
South America ◽  
Eucalyptus Grandis ◽  
Application Rate ◽  
Soil Conditions ◽  
Nutrient Deficiencies ◽  
Site Specific ◽  
Application Rates ◽  
Eucalyptus Plantations ◽  
Calcium Source

Abstract Calcium (Ca) is a critical plant nutrient typically applied at the time of planting in intensive Eucalyptus plantations in South America. At two sites in Colombia, we examined (1) calcium source by comparing growth after application of 100 kg ha−1 elemental Ca as lime or as pelletized highly reactive calcium fertilizer (HRCF) compared to a no application control, and (2) Ca rate by applying 0, 100, 200, and 400 kg ha−1 elemental Ca as HRCF with the addition of nitrogen, phosphorus, potassium, sulfur, and boron (NPKSB). We assessed height, diameter, and volume after 12 and 24 months. There were no growth differences from Ca source at the 100 kg ha−1 rate. We found increased volume after 24 months at the “Popayan” site with 200 and 400 kg ha−1 Ca HRCF+NPKSB treatments (112 and 113 m3 ha−1, respectively) compared to control (92 m3 ha−1), a 22% increase. In contrast, volume did not differ after 24 months at the “Darien” site, ranging from 114 m3 ha−1 in the 0 kg ha−1 Ca HRCF+NPKSB treatment to 98 m3 ha−1 in the control. Differences in response are likely due to soil characteristics, such as organic matter, emphasizing the importance of identifying site-specific nutrient deficiencies. Study Implications: Operational applications may be over- or under-applying calcium carbonate in Eucalyptus plantations in South America. In the first two years of a seven-year rotation located in volcanic soils in Colombia, we found that one site with more organic matter at a greater depth did not need Ca additions, whereas the other site required greater than current operational applications to optimize productivity. Ca application rate trials across a gradient of soil conditions could establish critical values and improve recommendations of appropriate Ca application rates and emphasize the importance of understanding site-specific soil conditions to produce effective fertilization regimes.

scholarly journals Agronomic Effects of Tectona grandis Biochar from Wood Residues on the Growth of Young Cedrela odorata Plants in a Nursery

Agronomy ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2079
Author(s):  
Arantxa Rodríguez Solís ◽  
Yorleny Badilla Valverde ◽  
Róger Moya
Keyword(s):  
Tectona Grandis ◽  
Application Rate ◽  
Agroforestry Systems ◽  
Soil Conditions ◽  
Cedrela Odorata ◽  
Alternative Source ◽  
Application Rates ◽  
Wood Residues ◽  
Number Of Leaves ◽  
And Performance

Biochar from agroforestry biomass residues is an alternative source of fertilizers for improving the soil fertility. In Costa Rica, Cedrela odorata is planted in pure plantations and agroforestry systems and different types of substrates are used in the nursery to enhance the growth and performance of the young saplings. The main objective of the present study was to evaluate the growth (in height, diameter, biomass) and distribution of carbon (C), hydrogen (H), and nitrogen (N) for C. odorata plants in a nursery with different application rates of biochar produced from Tectona grandis wood residues. The results showed that the above-measured variables were statistically affected by different application rates of the biochar. The stem diameter, total height, number of leaves, and height increment were statistically significantly higher in the substrate with an application rate of 25–50 tons/ha, in contrast to the 0 and 75 tons/ha application rates, which were statistically the lowest. As for the levels of C, H, and N, there were differences, with the highest values of N and C being in the leaves and stem with the 50 tons/ha application rate and the highest values of H for the 75 tons/ha application rate. The above results showed that applying biochar obtained from T. grandis residues improved soil conditions, resulting in better growth of C. odorata saplings with an application rate of 25 and 50 tons/ha.

scholarly journals Rice husk and melaleuca biochar additions reduce soil CH4 and N2O emissions and increase soil organic matter and nutrient availability

F1000Research ◽  
2021 ◽  
Vol 10 ◽  
pp. 1128
Author(s):  
Nam Tran Sy ◽  
Thao Huynh Van ◽  
Chiem Nguyen Huu ◽  
Cong Nguyen Van ◽  
Tarao Mitsunori
Keyword(s):  
Organic Matter ◽  
Rice Husk ◽  
Mekong Delta ◽  
Application Rate ◽  
N2o Emissions ◽  
Application Rates ◽  
Reduce Emissions ◽  
Local Water ◽  
Ch4 And N2o ◽  
Rice Husk Biochar

Background: Biochar is a promising material in mitigating greenhouse gases (GHGs) emissions from paddy fields due to its remarkable structural properties. Rice husk biochar (RhB) and melaleuca biochar (MB) are amendment materials that could be used to potentially reduce emissions in the Vietnamese Mekong Delta (VMD). However, their effects on CH4 and N2O emissions and soil under local water management and conventional rice cultivation have not been thoroughly investigated. Methods: We conducted a field experiment using biochar additions to the topsoil layer (0-20 cm). Five treatments comprising 0 t ha-1 (CT0); 5 t ha-1 (RhB5) and 10 t ha-1 (RhB10), and 5 t ha-1 (MB5) and 10 t ha-1 (MB10) were designed plot-by-plot (20 m2) in triplicates. Results: The results showed that biochar application from 5 to 10 t ha-1 significantly decreased cumulative CH4 (24.2 – 28.0%, RhB; 22.0 – 14.1%, MB) and N2O (25.6 – 41.0%, RhB; 38.4 – 56.4%, MB) fluxes without a reduction in grain yield. Increasing the biochar application rate further did not decrease significantly total CH4 and N2O fluxes but was seen to significantly reduce the global warming potential (GWP) and yield-scale GWP in the RhB treatments. Biochar application improved soil Eh but had no effects on soil pH. Whereas CH4 flux correlated negatively with soil Eh (P < 0.001; r2 = 0.552, RhB; P < 0.001; r2 = 0.502, MB). The soil physicochemical properties of bulk density, porosity, organic matter, and anaerobically mineralized N were significantly improved in biochar-amended treatments, while available P also slightly increased. Conclusions: Biochar supplementation significantly reduced CH4 and N2O fluxes and improved soil mineralization and physiochemical properties toward beneficial for rice plant. The results suggest that the optimal combination of biochar-application rates and effective water-irrigation techniques for soil types in the MD should be further studied in future works.

scholarly journals Impact of Different Nitrogen forms on Soil Fertility and Cowpea Productivity under Conditions Saline Soil

2021 ◽  
pp. 12-24
Author(s):  
M. H. Abdel Aal ◽  
Enga M. Niel ◽  
A. A. Abd El-Khalek
Keyword(s):  
Ammonium Sulphate ◽  
Soil Salinity ◽  
Saline Soil ◽  
Application Rate ◽  
Nitrogen Fertilizers ◽  
Soil Conditions ◽  
Nitrogen Forms ◽  
Available N ◽  
Application Rates ◽  
Chlorophyll Protein

The field experiment was carried out at the south-west portion of Shall El-Tina region, north Siena Governorate Egypt. The study investigated evaluations of different nitrogen fertilizers sources (ammonium nitrate, ammonium sulphate and urea fertilizers) and rates (100%, 75% and 50% recommended dose of all different nitrogen forms) alone or combined with bio-fertilizer (Rhizobium radiobacter sp.) strain on improve nutrients available and contents in cowpea productivity in newly reclaimed saline soil conditions during two summer seasons 2019 and 2020. The studies treatments were disturbed among the experimental plots in split design. The obtained results showed that using ammonium sulphate fertilizer was more effect on EC, pH, and available N, P, K, Fe, Mn and Zn values by increasing application rates compared with other treatments. Moreover, data recorded the applied ammonium sulphate75% with bio-fertilizer was increase of plant height, weight of 100 seeds, weight of pods (g plant-1), seeds yield (ton fed-1) have been affected by inoculation with bio-fertilizer combined with different nitrogen forms and different application rates than other treatments. The highest values of N, P, K, Fe, Mn and Zn concentrations and uptake in seeds were obtained with ammonium sulphate application combined with bio-fertilizer compared with other treatments. The increase of chlorophyll, protein contents in cowpea plants with decreasing soil salinity, while the increase of proline content was increasing soil salinity. The application of ammonium sulphate at application rate 75% N combined with bio-fertilizer improves soil properties and cowpea productivity under saline soil conditions.

EFFETS À LONG TERME D’APPORTS DE FUMIER SOLIDE DE BOVINS SUR L’ÉVOLUTION DES CARACTERISTIQUES CHIMIQUES DU SOL ET DE LA PRODUCTION DE MAIS-ENSILAGE

1990 ◽  
Vol 70 (3) ◽  
pp. 767-775 ◽  
Author(s):  
ADRIEN N’DAYEGAMIYE
Keyword(s):  
Organic Matter ◽  
Organic Matter Content ◽  
Residual Effect ◽  
Application Rate ◽  
Exchange Capacity ◽  
Matter Content ◽  
Cattle Manure ◽  
Manure Application ◽  
Application Rates ◽  
Percent Recovery

A long-term field experiment was initiated on a Neubois silty loam in 1978 in the county of Levis, Québec to study the changes in soil characteristics and silage corn yields following manure application. Solid beef cattle manure was incorporated without fertilizer every 2 yr in fall, at rates of 0, 20, 40, 60, 80 and 100 t ha−1. Even when significant differences were observed between treatments low corn yields were obtained from 1978 to 1984. These low yields were related to the low N, P and K recoveries from applied manure. For the 20 t ha−1 application rate, N. P and K recoveries from manure in the first year were 28, 7 and 1396, respectively. N, P and K recovery decreased with manure application rates. Corn yields increased progressively, but they achieved their maximum value (10–12 t ha−1 DM) only in 1985 and after three manure applications. This was due to the important residual effect of manure. Highly significant increases in N (7–64%), P (80–300%) and K (37–158%) as well as other nutrients were associated with manure applications. Manure application also significantly increased soil pH, CEC and organic matter. Average yearly increases of organic matter content were 0.06% and 0.16% for 20 to 40 t ha−1, respectively, and varied from 0.20 to 0.30% for the highest application rates (60–100 t ha−1). These improvements of soil properties constitute the "indirect effect" of manure. This study showed that percent recovery of N, P and K from solid cattle manure was generally low. Thus, manure should be mainly considered as an organic amendment.Key words: Solid cattle manure, corn silage, percent recovery, pH, mineral nutrients, cation exchange capacity, organic matter

scholarly journals Increasing Nitrogen Use Efficiency of Corn in Midwestern Cropping Systems

2001 ◽  
Vol 1 ◽  
pp. 682-690 ◽  
Author(s):  
J.L. Hatfield ◽  
J.H. Prueger
Keyword(s):  
Organic Matter ◽  
Water Use ◽  
Application Rate ◽  
Growth Patterns ◽  
N Loss ◽  
Potential Yield ◽  
N Application ◽  
Application Rates ◽  
N Application Rate ◽  
Use Efficiency

Nitrogen (N) loss from agricultural systems raises concerns about the potential impact of farming practices on environmental quality. N is a critical input to agricultural production. However, there is little understanding of the interactions among crop water use, N application rates, and soil types. This study was designed to quantify these interactions in corn (Zea mays L.) grown in production-size fields in central Iowa on the Clarion-Nicollet-Webster soil association. Seasonal water use varied by soil type and N application rate. Yield varied with N application rate, with the highest average yield obtained at 100 kg ha-1. N use efficiency (NUE) decreased with increasing N application rates, having values around 50%. Water use efficiency (WUE) decreased as N fertilizer rates increased. Analysis of plant growth patterns showed that in the low organic matter soils (lower water-holding capacities), potential yield was not achieved because of water deficits during the grain-filling period. Using precipitation data coupled with daily water use throughout the season, lower organic matter soils showed these soils began to drain earlier in the spring and continued to drain more water throughout the season. The low NUE in these soils together with increased drainage lead to greater N loss from these soils. Improved management decisions have shown that it is possible to couple water use patterns with N application to increase both WUE and NUE.

scholarly journals Determining the effect of exogenous organic materials on spatial distribution of maize yield

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Bogusław Usowicz ◽  
Jerzy Lipiec
Keyword(s):  
Spatial Distribution ◽  
Management Practices ◽  
Organic Materials ◽  
Weather Conditions ◽  
Maize Yield ◽  
Application Rate ◽  
Soil Conditions ◽  
Mineral N ◽  
Application Rates ◽  
Linear Regressions

AbstractKnowledge on spatial distribution of crop yield in relation to fixed soil fertilisation with exogenous organic materials is essential for improving precise crop and soil management practices within a field. This study assessed the effect of various application rates and types of exogenous (recycled) organic materials (EOMs) containing different organic matter and nitrogen contents vs. mineral nitrogen on the yield of maize by means of linear regressions (trends), spatial kriging-interpolated maps, and Bland-Altman statistics. The experiments were conducted in 2013 and 2014 on two soils, i.e. loam silt in Braszowice (Poland) and clay silt loam in Pusté Jakartice (Czech Republic) under a cross-border cooperation project. The organic materials included compost from manure, slurry, and straw (Ag), industrial organic compost from sewage sludge (Ra), animal meal from animal by-products (Mb), and digestate from a biogas fries factory (Dg). The following 3 application rates of each EOM were adjusted according to the reference 100% = 200 kg N ha−1: 50 (50% N from EOM and 50% mineral N), 75 (75% N from EOM and 25% mineral N), and 100 (100% N from EOM). 100% mineral N was applied on control plots. All treatments were carried out in 4 replicates. The linear regressions between the EOM application rates and the maize yield were in general ascending in the Braszowice soil and descending in the more productive Pusté Jakartice soil. The spatial kriging-interpolated maps allowed separating zones of lower and higher yields with EOMs compared to the control. They were attributed in part to the different EOM application rates and soil water contents. The Bland-Altaman statistics showed that addition of 50% of N from EOMs in 2013 caused a decrease and an increase in the maize grain yield in Braszowice and Pusté Jakartice, respectively, whereas the inverse was true with the 75 and 100% EOM additions. In 2014, the yield of maize for silage increased with the increasing EOM application rate in Braszowice and decreased in Pusté Jakartice, but it was smaller on all EOM-amended plots than in the control. As shown by the limits of agreement lines, the maize yields were more even in Pusté Jakartice than Braszowice. These results provide helpful information for selection of the most yield-producing EOM rates depending on the site soil conditions and prevalent weather conditions.

scholarly journals Effect of different soil and weather conditions on efficacy, selectivity and dissipation of herbicides in sunflower

2020 ◽  
Vol 66 (No. 9) ◽  
pp. 468-476
Author(s):  
Miroslav Jursík ◽  
Martin Kočárek ◽  
Michaela Kolářová ◽  
Lukáš Tichý
Keyword(s):  
Cation Exchange Capacity ◽  
Chenopodium Album ◽  
Soil Layer ◽  
Weather Conditions ◽  
Growing Season ◽  
Application Rate ◽  
Exchange Capacity ◽  
Vertical Transport ◽  
Application Rates ◽  
High Precipitation

Six sunflower herbicides were tested at two application rates (1N and 2N) on three locations (with different soil types) within three years (2015–2017). Efficacy of the tested herbicides on Chenopodium album increased with an increasing cation exchange capacity (CEC) of the soil. Efficacy of pendimethalin was 95%, flurochloridone and aclonifen 94%, dimethenamid-P 72%, pethoxamid 49% and S-metolachlor 47%. All tested herbicides injured sunflower on sandy soil (Regosol) which had the lowest CEC, especially in wet conditions (phytotoxicity 27% after 1N application rate). The highest phytotoxicity was recorded after the application of dimethenamid-P (19% at 1N and 45% at 2N application rate). Main symptoms of phytotoxicity were leaf deformations and necroses and the damage of growing tips, which led to destruction of some plants. Aclonifen, pethoxamid and S-metolachlor at 1N did not injure sunflower on the soil with the highest CEC (Chernozem) in any of the experimental years. Persistence of tested herbicides was significantly longer in Fluvisol (medium CEC) compared to Regosol and Chernozem. Dimethenamid-P showed the shortest persistence in Regosol and Chernozem. The majority of herbicides was detected in the soil layer 0–5 cm in all tested soils. Vertical transport of herbicides in soil was affected by the herbicide used, soil type and weather conditions. The highest vertical transport was recorded for dimethenamid-P and pethoxamid (4, resp. 6% of applied rate) in Regosol in the growing season with high precipitation.  

scholarly journals Checking the site categorization criteria and amplification factors of the 2021 draft of Eurocode 8 Part 1–1

2021 ◽  
Author(s):  
Roberto Paolucci ◽  
Mauro Aimar ◽  
Andrea Ciancimino ◽  
Marco Dotti ◽  
Sebastiano Foti ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Shear Wave ◽  
Ground Motion ◽  
Shear Wave Velocity ◽  
Soft Soil ◽  
Site Amplification ◽  
Soil Conditions ◽  
Eurocode 8 ◽  
Site Specific ◽  
Amplification Factors

AbstractIn this paper the site categorization criteria and the corresponding site amplification factors proposed in the 2021 draft of Part 1 of Eurocode 8 (2021-draft, CEN/TC250/SC8 Working Draft N1017) are first introduced and compared with the current version of Eurocode 8, as well as with site amplification factors from recent empirical ground motion prediction equations. Afterwards, these values are checked by two approaches. First, a wide dataset of strong motion records is built, where recording stations are classified according to 2021-draft, and the spectral amplifications are empirically estimated computing the site-to-site residuals from regional and global ground motion models for reference rock conditions. Second, a comprehensive parametric numerical study of one-dimensional (1D) site amplification is carried out, based on randomly generated shear-wave velocity profiles, classified according to the new criteria. A reasonably good agreement is found by both approaches. The most relevant discrepancies occur for the shallow soft soil conditions (soil category E) that, owing to the complex interaction of shear wave velocity, soil deposit thickness and frequency range of the excitation, show the largest scatter both in terms of records and of 1D numerical simulations. Furthermore, 1D numerical simulations for soft soil conditions tend to provide lower site amplification factors than 2021-draft, as well as lower than the corresponding site-to-site residuals from records, because of higher impact of non-linear (NL) site effects in the simulations. A site-specific study on NL effects at three KiK-net stations with a significantly large amount of high-intensity recorded ground motions gives support to the 2021-draft NL reduction factors, although the very limited number of recording stations allowing such analysis prevents deriving more general implications. In the presence of such controversial arguments, it is reasonable that a standard should adopt a prudent solution, with a limited reduction of the site amplification factors to account for NL soil response, while leaving the possibility to carry out site-specific estimations of such factors when sufficient information is available to model the ground strain dependency of local soil properties.

scholarly journals Effects of two wood-based biochars on the fate of added fertilizer nitrogen—a 15N tracing study

2021 ◽  
Author(s):  
Subin Kalu ◽  
Gboyega Nathaniel Oyekoya ◽  
Per Ambus ◽  
Priit Tammeorg ◽  
Asko Simojoki ◽  
...  
Keyword(s):  
Plant Uptake ◽  
Plant Biomass ◽  
Application Rate ◽  
Control Treatment ◽  
Organic N ◽  
N Leaching ◽  
Soil N ◽  
Mineral N ◽  
Total N ◽  
Application Rates

AbstractA 15N tracing pot experiment was conducted using two types of wood-based biochars: a regular biochar and a Kon-Tiki-produced nutrient-enriched biochar, at two application rates (1% and 5% (w/w)), in addition to a fertilizer only and a control treatment. Ryegrass was sown in pots, all of which except controls received 15N-labelled fertilizer as either 15NH4NO3 or NH415NO3. We quantified the effect of biochar application on soil N2O emissions, as well as the fate of fertilizer-derived ammonium (NH4+) and nitrate (NO3−) in terms of their leaching from the soil, uptake into plant biomass, and recovery in the soil. We found that application of biochars reduced soil mineral N leaching and N2O emissions. Similarly, the higher biochar application rate of 5% significantly increased aboveground ryegrass biomass yield. However, no differences in N2O emissions and ryegrass biomass yields were observed between regular and nutrient-enriched biochar treatments, although mineral N leaching tended to be lower in the nutrient-enriched biochar treatment than in the regular biochar treatment. The 15N analysis revealed that biochar application increased the plant uptake of added nitrate, but reduced the plant uptake of added ammonium compared to the fertilizer only treatment. Thus, the uptake of total N derived from added NH4NO3 fertilizer was not affected by the biochar addition, and cannot explain the increase in plant biomass in biochar treatments. Instead, the increased plant biomass at the higher biochar application rate was attributed to the enhanced uptake of N derived from soil. This suggests that the interactions between biochar and native soil organic N may be important determinants of the availability of soil N to plant growth.

scholarly journals Evaluation of the Regional-Scale Optimal K Rate Based on Sustainable Apple Yield and High-Efficiency K Use in Loess Plateau and Bohai Bay of China: A Meta-Analysis

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1368
Author(s):  
Wenzheng Tang ◽  
Wene Wang ◽  
Dianyu Chen ◽  
Ningbo Cui ◽  
Haosheng Yang ◽  
...  
Keyword(s):  
Loess Plateau ◽  
High Efficiency ◽  
Meta Analysis ◽  
Regional Scale ◽  
Fertilizer Application ◽  
Application Rate ◽  
Bohai Bay ◽  
The Loess Plateau ◽  
Application Rates ◽  
Relationship Model

In order to meet the growing food demand of the global population and maintain sustainable soil fertility, there is an urgent need to optimize fertilizer application amount in agricultural production practices. Most of the existing studies on the optimal K rates for apple orchards were based on case studies and lack information on optimizing K-fertilizer management on a regional scale. Here, we used the method of combining meta-analysis with the K application rate-yield relationship model to quantify and summarize the optimal K rates of the Loess Plateau and Bohai Bay regions in China. We built a dataset based on 159 observations obtained from 18 peer-reviewed literature studies distributed in 15 different research sites and evaluated the regional-scale optimal K rates for apple production. The results showed that the linear plus platform model was more suitable for estimating the regional-scale optimal K rates, which were 208.33 and 176.61 kg K ha−1 for the Loess Plateau and Bohai Bay regions of China, respectively. Compared with high K application rates, the optimal K rates increased K use efficiency by 45.88–68.57%, with almost no yield losses. The optimal K rates also enhanced the yield by 6.30% compared with the low K application rates.

Sign in / Sign up

Export Citation Format

Share Document