scholarly journals Search for 7Be in the outbursts of four recent novae

2020 ◽  
Vol 492 (4) ◽  
pp. 4975-4985 ◽  
Author(s):  
P Molaro ◽  
L Izzo ◽  
P Bonifacio ◽  
M Hernanz ◽  
P Selvelli ◽  
...  
Keyword(s):  
Milky Way ◽  
Theoretical Models ◽  
Small Mass ◽  
Core Material ◽  
Echelle Spectrograph ◽  
Classical Novae ◽  
The Core ◽  
A Value ◽  
Order Of Magnitude ◽  
Thermonuclear Runaway

ABSTRACT Following the recent detection of 7Be ii in the outburst spectra of classical novae, we report the search for this isotope in the outbursts of four recent bright novae by means of high-resolution Ultraviolet and Visual Echelle Spectrograph (UVES) observations. The 7Be ii λλ313.0583, 313.1228 nm doublet resonance lines are detected in the high-velocity components of Nova Mus 2018 and ASASSN-18fv during outbursts. However, 7Be ii is not detected in ASASSN-17hx and possibly not in Nova Cir 2018, which shows that 7Be is not always ejected in the thermonuclear runaway. Taking into account the 7Be decay, we find X(7Be)/X(H) ≈ 1.5 × 10−5 and 2.2 × 10−5 in Nova Mus 2018 and ASASSN-18fv, respectively. A value of 7Be/H ≈ 2 × 10−5 is found in five out of the seven extant measurements, and it can be considered as a typical 7Be yield for novae. However, this value is almost one order of magnitude larger than predicted by current theoretical models. We argue that the variety of high 7Be/H abundances could be the result of a higher than solar content of 3He in the donor star. The cases with 7Be not detected might be related to the small mass of the white dwarf (WD) or to relatively little mixing with the core material of the WD. The 7Be/H, or 7Li/H, abundance is ≈ 4 dex above meteoritic abundance, thus confirming the novae as the main sources of 7Li in the Milky Way.

scholarly journals Theoretically Inferred Masses of the White Dwarf Components of Common Nova Systems

1979 ◽  
Vol 53 ◽  
pp. 469-473
Author(s):  
James W. Truran
Keyword(s):  
Boundary Conditions ◽  
White Dwarf ◽  
Cataclysmic Variables ◽  
Theoretical Models ◽  
Origin And Evolution ◽  
Classical Novae ◽  
The Subject ◽  
Increasing Knowledge ◽  
Thermonuclear Runaway

Questions concerning the origin and evolution of cataclysmic variables continue to be the subject of considerable inquiry and debate. Significant boundary conditions upon theoretical models may be imposed by our increasing knowledge of the characteristics of specific systems. It is the purpose of this contribution to argue that, within the framework of the thermonuclear runaway model, the classical novae are most reasonably interpreted as systems characterized by relatively massive white dwarf components.

The Social Neuroscience of Cooperation

2018 ◽  
Author(s):  
Jay Joseph Van Bavel
Keyword(s):  
Theoretical Models ◽  
Brain Regions ◽  
Review Literature ◽  
Social Neuroscience ◽  
Future Research ◽  
A Value ◽  
Group Cooperation ◽  
Neural Processes ◽  
The Social ◽  
Cooperative Decision Making

We review literature from several fields to describe common experimental tasks used to measure human cooperation as well as the theoretical models that have been used to characterize cooperative decision-making, as well as brain regions implicated in cooperation. Building on work in neuroeconomics, we suggest a value-based account may provide the most powerful understanding the psychology and neuroscience of group cooperation. We also review the role of individual differences and social context in shaping the mental processes that underlie cooperation and consider gaps in the literature and potential directions for future research on the social neuroscience of cooperation. We suggest that this multi-level approach provides a more comprehensive understanding of the mental and neural processes that underlie the decision to cooperate with others.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

scholarly journals Iron Based Core-Shell Structures as Versatile Materials: Magnetic Support and Solid Catalyst

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 72
Author(s):  
Christian Zambrzycki ◽  
Runbang Shao ◽  
Archismita Misra ◽  
Carsten Streb ◽  
Ulrich Herr ◽  
...  
Keyword(s):  
Water Purification ◽  
Functional Materials ◽  
Core Material ◽  
Solid Catalyst ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
The Core ◽  
Shell Nanostructures ◽  
Sio2 Shell ◽  
Iron Based

Core-shell materials are promising functional materials for fundamental research and industrial application, as their properties can be adapted for specific applications. In particular, particles featuring iron or iron oxide as core material are relevant since they combine magnetic and catalytic properties. The addition of an SiO2 shell around the core particles introduces additional design aspects, such as a pore structure and surface functionalization. Herein, we describe the synthesis and application of iron-based core-shell nanoparticles for two different fields of research that is heterogeneous catalysis and water purification. The iron-based core shell materials were characterized by transmission electron microscopy, as well as N2-physisorption, X-ray diffraction, and vibrating-sample magnetometer measurements in order to correlate their properties with the performance in the target applications. Investigations of these materials in CO2 hydrogenation and water purification show their versatility and applicability in different fields of research and application, after suitable individual functionalization of the core-shell precursor. For design and application of magnetically separable particles, the SiO2 shell is surface-functionalized with an ionic liquid in order to bind water pollutants selectively. The core requires no functionalization, as it provides suitable magnetic properties in the as-made state. For catalytic application in synthesis gas reactions, the SiO2-stabilized core nanoparticles are reductively functionalized to provide the catalytically active metallic iron sites. Therefore, Fe@SiO2 core-shell nanostructures are shown to provide platform materials for various fields of application, after a specific functionalization.

scholarly journals nanocrystals (0 ≤ x ≤ 1): growth, size control and shell formation on β-NaCeF4:Tb core particles

CrystEngComm ◽  
2020 ◽  
Vol 22 (46) ◽  
pp. 8036-8044
Author(s):  
Jannis Wehmeier ◽  
Markus Haase
Keyword(s):  
Size Control ◽  
Lattice Parameters ◽  
Core Material ◽  
Shell Formation ◽  
Shell Material ◽  
Strontium Content ◽  
The Core ◽  
Lighter Lanthanides ◽  
Core Particles

is an interesting shell material for β-NaREF4 particles of the lighter lanthanides (RE = Ce, Pr, Nd), as variation of its strontium content x allows to vary its lattice parameters and match those of the core material.

scholarly journals Dynamical Evolution of Globular Clusters After Core Collapse

1985 ◽  
Vol 113 ◽  
pp. 139-160 ◽  
Author(s):  
Douglas C. Heggie
Keyword(s):  
Surface Density ◽  
Globular Clusters ◽  
Stellar System ◽  
Dynamical Evolution ◽  
Theoretical Models ◽  
Numerical Calculations ◽  
Core Collapse ◽  
Density Profiles ◽  
The Core ◽  
Fokker Planck

This review describes work on the evolution of a stellar system during the phase which starts at the end of core collapse. It begins with an account of the models of Hénon, Goodman, and Inagaki and Lynden-Bell, as well as evaporative models, and modifications to these models which are needed in the core. Next, these models are related to more detailed numerical calculations of gaseous models, Fokker-Planck models, N-body calculations, etc., and some problems for further work in these directions are outlined. The review concludes with a discussion of the relation between theoretical models and observations of the surface density profiles and statistics of actual globular clusters.

SHELL MATERIAL'S PERFORMANCE OF THE MICROCAPSULE FOR ELECTROLYTIC CO-DEPOSITION

2010 ◽  
Vol 24 (15n16) ◽  
pp. 3124-3130 ◽  
Author(s):  
HUI CONG LIU ◽  
XIU QING XU ◽  
WEI PING LI ◽  
YAN HONG GUO ◽  
LI-QUN ZHU
Keyword(s):  
Composite Coating ◽  
Methyl Cellulose ◽  
Water Vapor Permeability ◽  
Core Material ◽  
Vapor Permeability ◽  
Shell Material ◽  
The Core ◽  
Surface Performance ◽  
The Stability ◽  
Positive Effect

The shell material of microcapsules has an important effect on the electrolytic co-deposition behavior, the release of core material and the surface performance of composite coating. This paper discussed the tensile property and the stability of three shell materials including polyvinyl alcohol (PVA), gelatin and methyl cellulose (MC). It is found that these three shell materials have good mechanical strength and flexibility which are favorable to electrolytic co-deposition and stability of microcapsules in composite coating and that MC has well permeability and porosity which has a positive effect on the release of the core material in composite coating. Moreover, the study of the thermal properties and water vapor permeability of the three shell materials showed that their permeability improved with increase of temperature and humidity. In addition, the composite copper coating containing microcapsules with PVA, gelatin or MC as shell material was prepared respectively.

Damage behavior of potting materials in sandwich composites with pinned joints

2015 ◽  
Vol 22 (5) ◽  
Author(s):  
Cesim Atas ◽  
Alper Basmaci
Keyword(s):  
Core Material ◽  
Sandwich Composite ◽  
Composite Panels ◽  
Sandwich Composites ◽  
Resin Infusion ◽  
Damage Behavior ◽  
Mechanical Joints ◽  
The Core ◽  
Bottom Face ◽  
Infusion Technique

AbstractThe damage behavior of the potting materials around a pinhole, being used in the mechanical joints of sandwich composites, is investigated experimentally. The sandwich composite panels used in the tests were manufactured by the vacuum-assisted resin infusion technique. Each of the top and bottom face sheets of the panels consisted of two woven E-glass/epoxy layers. As the core material, PVC foam (AIREX

Berechnung kinetischer Isotopeneffekte für die Reaktion von Methyljodid mit Cyanid-Ion

1966 ◽  
Vol 21 (9) ◽  
pp. 1377-1384
Author(s):  
A. V. Willi
Keyword(s):  
Transition State ◽  
Secular Equation ◽  
Isotope Effects ◽  
Force Constants ◽  
Bond Breaking ◽  
Bending Force ◽  
A Value ◽  
Order Of Magnitude ◽  
Deuterium Isotope Effects ◽  
The Difference

Kinetic carbon-13 and deuterium isotope effects are calculated for the SN2 reaction of CH3I with CN-. The normal vibrational frequencies of CH3I, the transition state I · · · CH3 · · · CN, and the corresponding isotope substituted reactants and transition states are evaluated from the force constants by solving the secular equation on an IBM 7094 computer.Values for 7 force constants of the planar CH3 moiety in the transition state (with an sp2 C atom) are obtained by comparison with suitable stable molecules. The stretching force constants related to the bonds being broken or newly formed (fCC, fCC and the interaction between these two stretches, /12) are chosen in such a way that either a zero or imaginary value for νʟ≠ will result. Agreement between calculated and experimental methyl-C13 isotope effects (k12/ k13) can be obtained only in sample calculations with sufficiently large values of f12 which lead to imaginary νʟ≠ values. Furthermore, the difference between fCI and fCC must be small (in the order of 1 mdyn/Å). The bending force constants, fHCI and fHCC, exert relatively little influence on k12/k13. They are important for the D isotope effect, however. As soon as experimental data on kH/kD are available it will be possible to derive a value for fHCC in the transition state if fHCI is kept constant at 0.205 mdynA, and if fCI, fCC and f12 are held in a reasonable order of magnitude. There is no agreement between experimental and calculated cyanide-C13 isotope effects. Possible explanations are discussed. — Since fCI and fCC cannot differ much it must be concluded that the transition state is relatively “symmetric”, with approximately equal amounts of bond making and bond breaking.

Release Profile of a Model Protein Drug Depending on the Stability of Microspheres Based on Polyelectrolyte Complex

2007 ◽  
Vol 342-343 ◽  
pp. 505-508
Author(s):  
Sung Won Kim ◽  
Yun Sik Nam ◽  
Yeon Jin Min ◽  
Jong Ho Kim ◽  
Kwang Meyong Kim ◽  
...  
Keyword(s):  
Polyelectrolyte Complex ◽  
Coating Layer ◽  
Great Influence ◽  
Release Profile ◽  
Core Material ◽  
Glycol Chitosan ◽  
The Core ◽  
Key Factor ◽  
Model Protein ◽  
The Stability

Stability and disintegration of natural polyelectrolyte complex microspheres for protein drugs delivery have been extensively investigated because of their great influence on the drug release patterns. In this study, we tested stability of microspheres with alginate (Alg) core layered by either chitosan (Chi) or glycol chitosan (GChi) by examining release profiles of fluorophorelabeled bovine serum albumin (BSA) and lysozyme (Lys) from the microspheres. While GChi shell was disintegrated quickly, Chi-shell microspheres showed good stability in PBS. Disintegration of the coated layer induced the core material instable. The results indicated that while the charges of the shell material provided additional diffusion barrier against the protein release, the key factor to hold the proteins inside the microspheres was the integrity of the outer coating layer.

Sign in / Sign up

Export Citation Format

Share Document