The Lorentz covariant Lee model

A quantum theory of interacting particles with rigorous Lorentz covariance and rigorous conservation laws of Lee type is set up; the process A ↔ B 1 + B 2 is permitted via a point interaction. For simplicity the particles are assumed to be scalars. The complete solution of the lowest `sector ’ of interest is straightforward in configuration space for the case of one space dimension. It is in the case of three space dimensions that the usual difficulties associated with a point interaction arise; it is shown that the use of a cut-off is not a reliable procedure in this context, and a section of the paper is devoted to the development of a device for dealing with these difficulties which differs from the usual renormalization method. It is found that applying this device to the covariant model leads to a theory which is without infinite renormalization of any kind, and which admits a legitimate ‘physical’ in terpretation after certain necessary ‘supplementary conditions’ are applied. The S -states in the lowest sector are fully described in configuration space. Finally, an indication of the variety of different models which may be obtained is given, and it is found that certain models which are at first sight unacceptable on account of their structure in the absence of interaction lead in fact to ‘physical’ consequences which are perfectly satisfactory.

Author(s):  
P. Maißer

This paper presents a differential-geometric approach to the multibody system dynamics regarded as a point dynamics in a n-dimensional configuration space Rn. This configuration space becomes a Riemannian space Vn the metric of which is defined by the kinetic energy of the multibody system (MBS). Hence, all concepts and statements of the Riemannian geometry can be used to study the dynamics of MBS. One of the key points is to set up the non-linear Lagrangian motion equations of tree-like MBS as well as of constrained mechanical systems, the perturbed equations of motion, and the motion equations of hybrid MBS in a derivative-free manner. Based on this approach transformation properties can be investigated for application in real-time simulation, control theory, Hamilton mechanics, the construction of first integrals, stability etc. Finally, a general Lyapunov-stable force control law for underactuated systems is given that demonstrates the power of the approach in high-performance sports applications.


2014 ◽  
Vol 996 ◽  
pp. 598-602
Author(s):  
Frédéric Valiorgue ◽  
Mathieu Girinon ◽  
Eric Feulvarch ◽  
Joël Rech ◽  
Philippe Gilles

Numerical simulation of turning is still one of the best solutions to understand and improve such a process. Since many years, researchers have tried to use several numerical approaches to go round the difficulties and to set up reliable models (Lagrangian, ALE,…). Currently no perfect complete solution is available and it is time to introduce dedicated models prone to simulate partially the phenomena in order to reach specific conditions linked with real industrial problematics. This paper will present a 3D local global method set up to predict surface residual stresses in finish turning. This approach uses two kinds of simulations. A first one that allows reaching thermo mechanical steady state around the cutting edge and the chip area. A second one which sequences the application of the extracted thermo mechanical fields onto the real workpiece surface. The obtained results concerning the residual stresses fields will then be compared with the ones recorded experimentally.


2019 ◽  
Vol 28 (10) ◽  
pp. 1950063
Author(s):  
S. Kim ◽  
V. O. Manturov

We construct a group [Formula: see text] corresponding to the motion of points in [Formula: see text] from the point of view of Delaunay triangulations. We study homomorphisms from pure braids on [Formula: see text] strands to the product of copies of [Formula: see text]. We will also study the group of pure braids in [Formula: see text], which is described by a fundamental group of the restricted configuration space of [Formula: see text], and define the group homomorphism from the group of pure braids in [Formula: see text] to [Formula: see text]. At the end of this paper, we give some comments about relations between the restricted configuration space of [Formula: see text] and triangulations of the 3-dimensional ball and Pachner moves.


1998 ◽  
Vol 13 (31) ◽  
pp. 5279-5372 ◽  
Author(s):  
FRANK WILCZEK

The lectures that follow were originally given in 1992, and written up only slightly later. Since then there have been dramatic developments in the quantum theory of black holes, especially in the context of string theory. None of these are reflected here. The concept of quantum hair, which is discussed at length in the lectures, is certainly of permanent interest, and I continue to believe that in some generalized form it will prove central to the whole question of how information is stored in black holes. The discussion of scattering and emission modes from various classes of black holes could be substantially simplified using modern techniques, and from currently popular perspectives the choice of examples might look eccentric. On the other hand fashions have changed rapidly in the field, and the big questions as stated and addressed here, especially as formulated for "real" black holes (nonextremal, in four-dimensional, asymptotically flat space–time, with supersymmetry broken), remain pertinent even as the tools to address them may evolve. The four lectures I gave at the school were based on two lengthy papers that have now been published, "Black Holes as Elementary Particles," Nuclear PhysicsB380, 447 (1992) and "Quantum Hair on Black Holes," Nuclear PhysicsB378, 175 (1992). The unifying theme of this work is to help make plausible the possibility that black holes, although they are certainly unusual and extreme states of matter, may be susceptible to a description using concepts that are not fundamentally different from those we use in describing other sorts of quantum-mechanical matter. In the first two lectures I discussed dilaton black holes. The fact that apparently innocuous changes in the "matter" action can drastically change the properties of a black hole is already very significant: it indicates that the physical properties of small black holes cannot be discussed reliably in the abstract, but must be considered with due regard to the rest of physics. (The macroscopic properties of large black holes, in particular those of astrophysical interest, are presumably well described by the familiar Einstein–Maxwell action which governs the massless fields. Heavy fields will at most provide Yukawa tails to the field surrounding the hole.) I will show how perturbations may be set up and analyzed completely, and why doing this is crucial for understanding the semiclassical physics of the hole including the Hawking radiation quantitatively. It will emerge that there is a class of dilaton black holes which behave as rather straightforward elementary particles. In the other two lectures I discussed the issue of hair on black holes, in particular the existence of hair associated with discrete gauge charges and its physical consequences. This hair is particularly interesting to analyze because it is invisible classically and to all order in ℏ. Its existence shows that black holes can have some "internal" quantum numbers in addition to their traditional classification by mass, charge, and angular momentum. The text that follows, follows the original papers closely.


2015 ◽  
Vol 24 (02) ◽  
pp. 1550013 ◽  
Author(s):  
Prabir Rudra

In this paper, we address the well-known cosmic coincidence problem in the framework of the f(G) gravity. In order to achieve this, an interaction between dark energy and dark matter is considered. A set-up is designed and a constraint equation is obtained, which generates the f(G) models that do not suffer from the coincidence problem. Due to the absence of a universally accepted interaction term introduced by a fundamental theory, the study is conducted over three different forms of logically chosen interaction terms. To illustrate the set-up three widely known models of f(G) gravity are taken into consideration and the problem is studied under the designed set-up. The study reveals that the popular f(G) gravity models do not approve of a satisfactory solution of the long standing coincidence problem, thus proving to be a major setback for them as successful models of universe. Finally, two nonconventional models of f(G) gravity have been proposed and studied in the framework of the designed set-up. It is seen that a complete solution of the coincidence problem is achieved for these models. The study also reveals that the b-interaction term is much more preferable compared to the other interactions, due to its greater compliance with the recent observational data.


Author(s):  
T. G. Naymik

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.


Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.


Author(s):  
O.L. Krivanek ◽  
J. TaftØ

It is well known that a standing electron wavefield can be set up in a crystal such that its intensity peaks at the atomic sites or between the sites or in the case of more complex crystal, at one or another type of a site. The effect is usually referred to as channelling but this term is not entirely appropriate; by analogy with the more established particle channelling, electrons would have to be described as channelling either through the channels or through the channel walls, depending on the diffraction conditions.


Author(s):  
David C. Joy ◽  
Dennis M. Maher

High-resolution images of the surface topography of solid specimens can be obtained using the low-loss technique of Wells. If the specimen is placed inside a lens of the condenser/objective type, then it has been shown that the lens itself can be used to collect and filter the low-loss electrons. Since the probeforming lenses in TEM instruments fitted with scanning attachments are of this type, low-loss imaging should be possible.High-resolution, low-loss images have been obtained in a JEOL JEM 100B fitted with a scanning attachment and a thermal, fieldemission gun. No modifications were made to the instrument, but a wedge-shaped, specimen holder was made to fit the side-entry, goniometer stage. Thus the specimen is oriented initially at a glancing angle of about 30° to the beam direction. The instrument is set up in the conventional manner for STEM operation with all the lenses, including the projector, excited.


Sign in / Sign up

Export Citation Format

Share Document