Algorithm comparison performance in assessing the quality of university websites

2017 ◽  
Author(s):  
Tenia Wahyuningrum ◽  
Nur Rokhman ◽  
Aina Musdholifah
Keyword(s):  
University Websites ◽  
Algorithm Comparison

scholarly journals TDCA: Improved Optimization Algorithm with Degree Distribution and Communication Traffic for the Deployment of Software Components Base on AUTOSAR Architecture

2021 ◽  
Author(s):  
Kunpeng Zhang ◽  
Yanheng Liu ◽  
Jindong Zhang ◽  
Guanhua Zhang ◽  
Jingyi Jin ◽  
...  
Keyword(s):  
System Architecture ◽  
Electronic Device ◽  
Linear Optimization ◽  
Software Components ◽  
Development Cost ◽  
Automotive Electronic ◽  
Algorithm Comparison ◽  
Communication Traffic ◽  
Quality Of Products

Abstract AUTOSAR (Automotive Open System Architecture), as an open, standardized framework for automotive electronic software development, has gradually become the standard followed by major automotive manufacturers and automotive electronic device suppliers. The electronic software system problem improves the development efficiency and portability of the system by reducing the development cost of automotive electronic software while ensuring the quality of products and services, which is beneficial for subsequent upgrades and updates of the system. In order to improve the reliability of the software component deployment algorithm based on AUTOSAR architecture, we proposed the TDCA algorithm. During the execution of the algorithm, communication volume and communication degree are introduced to improve the accuracy of the deployment plan by optimizing the bus load and ECU balancing. Algorithm comparison experiments show that comparing heuristic and linear optimization algorithms, the TDCA algorithm proposed in this paper has significant advantages in reducing bus load and balancing ECU utilization. The algorithm can reduce the communication between cores and balance ECU load according to the constraints of AUTOSAR architecture.

Improved CTT-SP Algorithm with Critical Path Method for Massive Data Storage in Scientific Workflow Systems

2016 ◽  
Vol 30 (08) ◽  
pp. 1659023 ◽  
Author(s):  
Lei Fan ◽  
Sha Meng ◽  
Xiyang Liu ◽  
Yanfang Liang
Keyword(s):  
Quality Of Service ◽  
Data Storage ◽  
Critical Path ◽  
Scientific Workflow ◽  
Complex Data ◽  
Critical Path Method ◽  
Intermediate Data ◽  
Comparison Results ◽  
Algorithm Comparison

Scientific WorkFlows (SWFs) play significant roles in scientific research and engineering simulation, which are often data intensive and has complex data dependencies. The storage of massive intermediate datasets has great impacts on the performance and the quality of service of a SWF system, which has become a difficult and complex task. Through analyzing the cost transitive tournament shortest path (CTT-SP)-based algorithm proposed for the intermediate data storage in SWF systems, the disadvantage of the CTT-SP algorithm over its sensitivity to the main branches can be found. We proposed an improved CTT-SP algorithm based on the critical path method (CPM), aiming at reducing the sensitivity of the main branch and improving the performance of the algorithm. By adding the generation information of the datasets on the arrows, the data dependency graph of a SWF can be converted to an activity on arrow (AOA) net. Then, the critical path of the AOA net is used to be the main branch of the CTT-SP algorithm, which can reduce the impacts of the main branch and keep the quality of service of the SWF systems. Experiments are designed to test the impacts of the main branches and the performance of the improved CTT-SP algorithms. The results show the significant impacts of the main branches on the performance of the CTT-SP algorithm and the effectiveness of the CPM on improving the performance of the CTT-SP algorithm. Comparison results demonstrate the positiveness and effectiveness of the improved CTT-SP algorithm.

A Checklist Proposal to Evaluate the Quality of University Websites

2021 ◽  
pp. 134-145
Author(s):  
Fátima Veríssimo ◽  
Daniel Raposo ◽  
Vera Barradas ◽  
João Neves ◽  
José Silva ◽  
...  
Keyword(s):  
University Websites

scholarly journals Culture-Bound Web-Based Institutional Academic Texts. The Case of Some Romance Language University Websites in English

Linguaculture ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 113-131
Author(s):  
Ioana-Carmen Păștinaru
Keyword(s):  
Web Based ◽  
Translation Strategies ◽  
Romance Language ◽  
University Websites ◽  
The Past ◽  
Academic Texts ◽  
Study Results ◽  
The Impact

The internationalisation process of European higher education over the past years largely encouraged the translation into English of many university websites. However, the (deliberate or nondeliberate) presence of culture-bound terms on the English version of university websites represents an issue of debate, considering the worldwide provenance of visitors accessing the websites and the purpose of these texts. The main goal of this article is to analyse the appropriateness of translation strategies used for the culture-bound terms on university websites. The practical part of this research uses Aixelá’s classification of translation strategies for the analysis of the culture-bound terms identified on some Romance language university webpages translated into English, allowing a series of suggestions and recommendations in each case. The study results have demonstrated that the strategy of conservation through repetition is used most often. Last but not least, this paper intends to raise awareness as to the translator’s role and the impact of the quality of translations of university webpages into English as a lingua franca.

Immunoferritin localization of intracellular antigens in positively stained frozen sections

1978 ◽  
Vol 36 (2) ◽  
pp. 168-169
Author(s):  
K. T. Tokuyasu
Keyword(s):  
Surface Tension ◽  
Water Surface ◽  
Thin Layers ◽  
The Other ◽  
Positive Staining ◽  
Frozen Sections ◽  
The Past ◽  
Ultrathin Frozen Sections ◽  
Definition Of

During the past investigations of immunoferritin localization of intracellular antigens in ultrathin frozen sections, we found that the degree of negative staining required to delineate u1trastructural details was often too dense for the recognition of ferritin particles. The quality of positive staining of ultrathin frozen sections, on the other hand, has generally been far inferior to that attainable in conventional plastic embedded sections, particularly in the definition of membranes. As we discussed before, a main cause of this difficulty seemed to be the vulnerability of frozen sections to the damaging effects of air-water surface tension at the time of drying of the sections.Indeed, we found that the quality of positive staining is greatly improved when positively stained frozen sections are protected against the effects of surface tension by embedding them in thin layers of mechanically stable materials at the time of drying (unpublished).

Lithography below 100 nm

1983 ◽  
Vol 41 ◽  
pp. 96-99
Author(s):  
L. D. Jackel
Keyword(s):  
Spatial Distribution ◽  
Electron Beam ◽  
Electron Scattering ◽  
Electron Beam Lithography ◽  
Substrate Material ◽  
Local Electron ◽  
Electron Dose ◽  
Positive Resist ◽  
Exposure Process

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

Convergent Beam Electron Diffraction

1978 ◽  
Vol 36 (3) ◽  
pp. 304-315
Author(s):  
G. Lehmpfuhl
Keyword(s):  
Electron Diffraction ◽  
Diffraction Pattern ◽  
Crystal Surface ◽  
Diffraction Spot ◽  
Crystal Thickness ◽  
Large Area ◽  
Electron Microscopic ◽  
Additional Information ◽  
Microscopic Investigations

Introduction In electron microscopic investigations of crystalline specimens the direct observation of the electron diffraction pattern gives additional information about the specimen. The quality of this information depends on the quality of the crystals or the crystal area contributing to the diffraction pattern. By selected area diffraction in a conventional electron microscope, specimen areas as small as 1 µ in diameter can be investigated. It is well known that crystal areas of that size which must be thin enough (in the order of 1000 Å) for electron microscopic investigations are normally somewhat distorted by bending, or they are not homogeneous. Furthermore, the crystal surface is not well defined over such a large area. These are facts which cause reduction of information in the diffraction pattern. The intensity of a diffraction spot, for example, depends on the crystal thickness. If the thickness is not uniform over the investigated area, one observes an averaged intensity, so that the intensity distribution in the diffraction pattern cannot be used for an analysis unless additional information is available.

Observability of Very Thick Specimen by Using Transmission Scanning Electron Microscope

1971 ◽  
Vol 29 ◽  
pp. 26-27
Author(s):  
K. Shibatomi ◽  
T. Yamanoto ◽  
H. Koike
Keyword(s):  
Electron Microscope ◽  
Image Quality ◽  
Scanning Electron Microscope ◽  
Chromatic Aberration ◽  
Image Contrast ◽  
Objective Lens ◽  
Thick Specimen ◽  
Transmission Electron ◽  
Scanning Electron

In the observation of a thick specimen by means of a transmission electron microscope, the intensity of electrons passing through the objective lens aperture is greatly reduced. So that the image is almost invisible. In addition to this fact, it have been reported that a chromatic aberration causes the deterioration of the image contrast rather than that of the resolution. The scanning electron microscope is, however, capable of electrically amplifying the signal of the decreasing intensity, and also free from a chromatic aberration so that the deterioration of the image contrast due to the aberration can be prevented. The electrical improvement of the image quality can be carried out by using the fascionating features of the SEM, that is, the amplification of a weak in-put signal forming the image and the descriminating action of the heigh level signal of the background. This paper reports some of the experimental results about the thickness dependence of the observability and quality of the image in the case of the transmission SEM.

The Current Situation in Chemical Stabilization of Biological Materials

1972 ◽  
Vol 30 ◽  
pp. 132-133
Author(s):  
John H. Luft
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Osmium Tetroxide ◽  
Molecular Level ◽  
Cross Linking ◽  
Chemical Stabilization ◽  
Specimen Preparation ◽  
Sufficient Condition ◽  
Radio Telescopes

With information processing devices such as radio telescopes, microscopes or hi-fi systems, the quality of the output often is limited by distortion or noise introduced at the input stage of the device. This analogy can be extended usefully to specimen preparation for the electron microscope; fixation, which initiates the processing sequence, is the single most important step and, unfortunately, is the least well understood. Although there is an abundance of fixation mixtures recommended in the light microscopy literature, osmium tetroxide and glutaraldehyde are favored for electron microscopy. These fixatives react vigorously with proteins at the molecular level. There is clear evidence for the cross-linking of proteins both by osmium tetroxide and glutaraldehyde and cross-linking may be a necessary if not sufficient condition to define fixatives as a class.

Sign in / Sign up

Export Citation Format

Share Document