scholarly journals TDCA: Improved Optimization Algorithm with Degree Distribution and Communication Traffic for the Deployment of Software Components Base on AUTOSAR Architecture

2021 ◽  
Author(s):  
Kunpeng Zhang ◽  
Yanheng Liu ◽  
Jindong Zhang ◽  
Guanhua Zhang ◽  
Jingyi Jin ◽  
...  
Keyword(s):  
System Architecture ◽  
Electronic Device ◽  
Linear Optimization ◽  
Software Components ◽  
Development Cost ◽  
Automotive Electronic ◽  
Algorithm Comparison ◽  
Communication Traffic ◽  
Quality Of Products

Abstract AUTOSAR (Automotive Open System Architecture), as an open, standardized framework for automotive electronic software development, has gradually become the standard followed by major automotive manufacturers and automotive electronic device suppliers. The electronic software system problem improves the development efficiency and portability of the system by reducing the development cost of automotive electronic software while ensuring the quality of products and services, which is beneficial for subsequent upgrades and updates of the system. In order to improve the reliability of the software component deployment algorithm based on AUTOSAR architecture, we proposed the TDCA algorithm. During the execution of the algorithm, communication volume and communication degree are introduced to improve the accuracy of the deployment plan by optimizing the bus load and ECU balancing. Algorithm comparison experiments show that comparing heuristic and linear optimization algorithms, the TDCA algorithm proposed in this paper has significant advantages in reducing bus load and balancing ECU utilization. The algorithm can reduce the communication between cores and balance ECU load according to the constraints of AUTOSAR architecture.

scholarly journals Development of E-learning Software Based Multiplatform Components

2017 ◽  
Vol 6 (3) ◽  
pp. 228-234
Author(s):  
Irma Salamah ◽  
M. Aris Ganiardi
Keyword(s):  
Software Development ◽  
Web Applications ◽  
Electronic Device ◽  
Cost Effective ◽  
Software Components ◽  
High Quality ◽  
Information And Communication ◽  
E Learning ◽  
Learning Software

E-learning software is a product of information and communication technology used to help dynamic and flexible learning process between teacher and student. The software technology was first used in the development of e-learning software in the form of web applications. The advantages of this technology because of the ease in the development, installation, and distribution of data. Along with advances in mobile/wireless electronics technology, e-learning software is adapted to this technology known as mobile learning. The ability of this electronic device is the same as a single computer even though it is simpler than a single computer. The problem that arises when e-learning software operates on multiple platforms is that computer programs are made repeatedly depending on the platform being used. This situation will obviously affect the quality of e-learning software. To overcome these problems, in this study developed component-based software that is a modern paradigm for software development that produces reusable software components, high quality, and cost-effective. In software development, software components will be assembled in the software in need. The result of this research is high quality e-learning software based multiplatform component.

Resistance Monitor and Control for Vacuum Evaporation of Metals and Carbon

1976 ◽  
Vol 34 ◽  
pp. 572-573
Author(s):  
Russell L. Steere ◽  
Eric F. Erbe ◽  
J. Michael Moseley
Keyword(s):  
Electronic Device ◽  
Point Sources ◽  
High Contrast ◽  
Variable Resistor ◽  
Quality Of Results ◽  
Low Contrast ◽  
Evaporation Source ◽  
And Control ◽  
At Will

We have designed and built an electronic device which compares the resistance of a defined area of vacuum evaporated material with a variable resistor. When the two resistances are matched, the device automatically disconnects the primary side of the substrate transformer and stops further evaporation.This approach to controlled evaporation in conjunction with the modified guns and evaporation source permits reliably reproducible multiple Pt shadow films from a single Pt wrapped carbon point source. The reproducibility from consecutive C point sources is also reliable. Furthermore, the device we have developed permits us to select a predetermined resistance so that low contrast high-resolution shadows, heavy high contrast shadows, or any grade in between can be selected at will. The reproducibility and quality of results are demonstrated in Figures 1-4 which represent evaporations at various settings of the variable resistor.

CONTROL IN REAL TIME THE DENSITY OF PRODUCT AT VARIOUS STAGES OF THE TECHNOLOGICAL PROCESS OF SUGAR PRODUCTION

2020 ◽  
Author(s):  
S.B. Kudryashev ◽  
◽  
N.S. Assev ◽  
R.D. Belashov ◽  
V.A. Naumenko ◽  
...  
Keyword(s):  
Real Time ◽  
Technological Process ◽  
Sugar Industry ◽  
Sugar Production ◽  
Production Processes ◽  
Quality Of Products

The article is devoted to solving one of the most important problems of the development of the sugar industry in Russia – the modernization of sugar production processes. Today, sugar production is actively being modernized, shifting most of its processes to the path of avomatization and optimization to improve the quality of products. This article describes one of the main ways to obtain information about the concentration of sucrose in syrup in the production of sugar.

Агрономическая эффективность промышленной (голландской) технологии возделывания картофеля

2018 ◽  
Author(s):  
C. Coy ◽  
A.V. Shuravilin ◽  
O.A. Zakharova
Keyword(s):  
Heavy Metals ◽  
Regression Analysis ◽  
Positive Response ◽  
Growth Yield ◽  
Correlation And Regression Analysis ◽  
Yield And Quality ◽  
Quality Of Products ◽  
High Degree ◽  
The Impact

Приведены результаты исследований по изучению влияния промышленной технологии возделывания картофеля на развитие, урожайность и качество продукции. Выявлена положительная реакция растений на подкормку K2SO4 в период посадки. Корреляционно-регрессионный анализ урожайности и качества клубней выявил высокую степень достоверности результатов опыта. Содержание нитратов и тяжелых металлов в клубнях было ниже допустимых величин.The results of studies on the impact of industrial technology of potato cultivation on growth, yield and quality of products. There was a positive response of plants to fertilizer K2SO4 in the period of planting. Correlation and regression analysis of yield and quality of tubers revealed a high degree of reliability of the results of experience. The contents of nitrates and heavy metals in tubers was below the permissible values.

PENGARUH HARGA DAN KUALITAS PRODUK TERHADAP LOYALITAS PELANGGAN ALUMUNIUM

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Widodo Widodo ◽  
Marshelly Chandra Kumala
Keyword(s):  
Data Collection ◽  
Product Quality ◽  
Customer Loyalty ◽  
Significant Influence ◽  
Secondary Data ◽  
Primary Data ◽  
Research Results ◽  
Is Research ◽  
Quality Of Products

<em>The objective of this is research was conducted to find out how the influence of the price and quality of products against customer loyalty at PT. Alakasa Extrusindo Jakarta. This research was conducted in Alakasa Extrusindo PT by doing data collection, through the primary data and secondary data.  The research results showed that the simultaneous price variables  and product quality  has a positive and significant effect against the variable customer loyalty. partially showed that price variables has a positive and significant influence towards customer loyalty. And partially showed that product quality variables  has a positive and significant influence towards customer loyalty</em>

Bactericidal activity of drugs from Juglans Regia to the microflora of livestock premises in organic pig breeding

2020 ◽  
pp. 113-122
Author(s):  
Serhii Zinoviev ◽  
Andrii Kurman ◽  
Dmytro Bindiug ◽  
Pavlo Grubich ◽  
Liubov Lepeta
Keyword(s):  
Bactericidal Activity ◽  
Juglans Regia ◽  
Herbal Remedies ◽  
Potential Efficacy ◽  
Internal Structures ◽  
Bactericidal Properties ◽  
Experimental Base ◽  
Quality Of Products ◽  
Gram Positive Cocci

The introduction of the newest technologies of organic pig breeding has the basic principle of minimizing the use in pigs of chemicals, trace amounts of which in pig production adversely affect the quality of products and the health of consumers. The transition to herbal remedies, the maximum possible rejection of chemical synthesis products, is inhibited, in the main, by the relatively small spectrum of plant compounds with the investigated activity. According to the results of previous studies, six working solutions of Juglans regia L phytosupply extracts - potential phytosine disinfectants were developed: To investigate the bactericidal activity of the experimental preparations of Juglans regia, flushes were made from the internal structures and technological equipment of the housing of the pig stock of the experimental base v. Takhtaulove. Obtained samples of typical banal microflora of the pig complex were mixed to obtain a bacterial-containing suspension averaged over the concentration of microbial bodies and the spectrum of types of microflora in the microbiota. When cultured on nutrient media, with the superficial sowing of a suspension of banal microflora of a pig in the presence of a potential phytodisinfectant, processes of development of individual colonies of the microflora are observed. The amount and intensity of their development, the degree of inhibition of life, assess the level of bactericidal activity of the extracts. The highest bactericidal and fungicidal activity, and consequently, the potential efficacy as a possible disinfectant in the technology of organic pig breeding was revealed by the extracts of phytosupply Juglans regia L No. 2 (extractant - acetic acid to 5 %, nut of wax ripeness) and 4 (extractant, alcohol 20 % nutrient wax ripeness (proven after obtaining the primary extract of up to 5 % alcohol), which have bactericidal properties against gram-positive cocci and gram-negative sticks, but have a weak effect on the spore-forming bacilli. Key words: organic pig breeding, bactericidal activity, phyto-disinfectant, commonplace typical microflora of a pig complex, phyto row materials, walnut extract.

scholarly journals Assessment of quality of products from polymer materials for machine-building purposes

2020 ◽  
Vol 1614 ◽  
pp. 012044
Author(s):  
D Gramakov ◽  
A Larchenko ◽  
N Filippenko ◽  
A Livshits ◽  
D Bakanin ◽  
...  
Keyword(s):  
Machine Building ◽  
Polymer Materials ◽  
Quality Of Products

scholarly journals Quality Classification of Injection-Molded Components by Using Quality Indices, Grading, and Machine Learning

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 353
Author(s):  
Kun-Cheng Ke ◽  
Ming-Shyan Huang
Keyword(s):  
Machine Learning ◽  
Integrated Circuit ◽  
Quality Indices ◽  
Statistical Process ◽  
Suitable Alternative ◽  
Quality Grading ◽  
Quality Of Products ◽  
The Cost ◽  
Mlp Model

Conventional methods for assessing the quality of components mass produced using injection molding are expensive and time-consuming or involve imprecise statistical process control parameters. A suitable alternative would be to employ machine learning to classify the quality of parts by using quality indices and quality grading. In this study, we used a multilayer perceptron (MLP) neural network along with a few quality indices to accurately predict the quality of “qualified” and “unqualified” geometric shapes of a finished product. These quality indices, which exhibited a strong correlation with part quality, were extracted from pressure curves and input into the MLP model for learning and prediction. By filtering outliers from the input data and converting the measured quality into quality grades used as output data, we increased the prediction accuracy of the MLP model and classified the quality of finished parts into various quality levels. The MLP model may misjudge datapoints in the “to-be-confirmed” area, which is located between the “qualified” and “unqualified” areas. We classified the “to-be-confirmed” area, and only the quality of products in this area were evaluated further, which reduced the cost of quality control considerably. An integrated circuit tray was manufactured to experimentally demonstrate the feasibility of the proposed method.

scholarly journals Optimisation of Shrinkage and Strength on Thick Plate Part Using Recycled LDPE Materials

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1795
Author(s):  
Norshahira Roslan ◽  
Shayfull Zamree Abd Rahim ◽  
Abdellah El-hadj Abdellah ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Katarzyna Błoch ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Thick Plate ◽  
Processing Parameters ◽  
Processing Parameter ◽  
Plastic Injection Moulding ◽  
Optimal Setting ◽  
Quality Of Products ◽  
Validation Tests ◽  
Plastic Injection

Achieving good quality of products from plastic injection moulding processes is very challenging, since the process comprises many affecting parameters. Common defects such as warpage are hard to avoid, and the defective parts will eventually go to waste, leading to unnecessary costs to the manufacturer. The use of recycled material from postindustrial waste has been studied by a few researchers. However, the application of an optimisation method by which to optimise processing parameters to mould parts using recycled materials remains lacking. In this study, Response Surface Methodology (RSM) and Particle Swarm Optimisation (PSO) methods were conducted on thick plate parts moulded using virgin and recycled low-density polyethylene (LDPE) materials (100:0, 70:30, 60:40 and 50:50; virgin to recycle material ratios) to find the optimal input parameters for each of the material ratios. Shrinkage in the x and y directions increased in correlation with the recycled ratio, compared to virgin material. Meanwhile, the tensile strength of the thick plate part continued to decrease when the recycled ratio increased. R30 (70:30) had the optimum shrinkage in the x direction with respect to R0 (100:0) material where the shrinkage increased by 24.49% (RSM) and 33.20% (PSO). On the other hand, the shrinkage in the y direction for R30 material increased by 4.48% (RSM) and decreased by 2.67% (PSO), while the tensile strength of R30 (70:30) material decreased by 0.51% (RSM) and 2.68% (PSO) as compared to R0 (100:0) material. Validation tests indicated that the optimal setting of processing parameter suggested by PSO and RSM for R0 (100:0), R30 (70:30), R40 (60:40) and R50 (50:50) was less than 10%.

Sign in / Sign up

Export Citation Format

Share Document