Nano-node tri-gate FinFET devices have been developed after integrating a 14 Å nitrided gate oxide upon the silicon-on-insulator (SOI) wafers established on an advanced CMOS logic platform. These vertical double gate (FinFET) devices with ultra-thin silicon fin (Si-fin) widths ranging from 27 nm to 17 nm and gate length down to 30 nm have been successfully developed with a 193 nm scanner lithography tool. Combining the cobalt fully silicidation and the CESL strain technology beneficial for PMOS FinFETs was incorporated into this work. Detailed analyses of [Formula: see text]–[Formula: see text] characteristics, threshold voltage [Formula: see text], and drain-induced barrier lowering (DIBL) illustrate that the thinnest 17 nm Si-fin width FinFET exhibits the best gate controllability due to its better suppression of short channel effect (SCE). However, higher source/drain resistance [Formula: see text], channel mobility degradation due to dry etch steps, or “current crowding effect” will slightly limit its transconductance [Formula: see text] and drive current.
Design and Analysis of Logic Gates using GaN based Double Gate MOSFET (DG-MOS)