A native-oxide-free process for 4 nm capacitor dielectrics

Author(s):  
M. Nakano ◽  
N. Shinmura ◽  
K. Iguchi ◽  
T. Watanabe ◽  
K. Sakiyama
Keyword(s):  
Author(s):  
C.M. Sung ◽  
M. Levinson ◽  
M. Tabasky ◽  
K. Ostreicher ◽  
B.M. Ditchek

Directionally solidified Si/TaSi2 eutectic composites for the development of electronic devices (e.g. photodiodes and field-emission cathodes) were made using a Czochralski growth technique. High quality epitaxial growth of silicon on the eutectic composite substrates requires a clean silicon substrate surface prior to the growth process. Hence a preepitaxial surface cleaning step is highly desirable. The purpose of this paper is to investigate the effect of surface cleaning methods on the epilayer/substrate interface and the characterization of silicon epilayers grown on Si/TaSi2 substrates by TEM.Wafers were cut normal to the <111> growth axis of the silicon matrix from an approximately 1 cm diameter Si/TaSi2 composite boule. Four pre-treatments were employed to remove native oxide and other contaminants: 1) No treatment, 2) HF only; 3) HC1 only; and 4) both HF and HCl. The cross-sectional specimens for TEM study were prepared by cutting the bulk sample into sheets perpendicular to the TaSi2 fiber axes. The material was then prepared in the usual manner to produce samples having a thickness of 10μm. The final step was ion milling in Ar+ until breakthrough occurred. The TEM samples were then analyzed at 120 keV using the Philips EM400T.


Author(s):  
R. Rajesh ◽  
R. Droopad ◽  
C. H. Kuo ◽  
R. W. Carpenter ◽  
G. N. Maracas

Knowledge of material pseudodielectric functions at MBE growth temperatures is essential for achieving in-situ, real time growth control. This allows us to accurately monitor and control thicknesses of the layers during growth. Undesired effusion cell temperature fluctuations during growth can thus be compensated for in real-time by spectroscopic ellipsometry. The accuracy in determining pseudodielectric functions is increased if one does not require applying a structure model to correct for the presence of an unknown surface layer such as a native oxide. Performing these measurements in an MBE reactor on as-grown material gives us this advantage. Thus, a simple three phase model (vacuum/thin film/substrate) can be used to obtain thin film data without uncertainties arising from a surface oxide layer of unknown composition and temperature dependence.In this study, we obtain the pseudodielectric functions of MBE-grown AlAs from growth temperature (650°C) to room temperature (30°C). The profile of the wavelength-dependent function from the ellipsometry data indicated a rough surface after growth of 0.5 μm of AlAs at a substrate temperature of 600°C, which is typical for MBE-growth of GaAs.


Author(s):  
S. Yegnasubramanian ◽  
V.C. Kannan ◽  
R. Dutto ◽  
P.J. Sakach

Recent developments in the fabrication of high performance GaAs devices impose crucial requirements of low resistance ohmic contacts with excellent contact properties such as, thermal stability, contact resistivity, contact depth, Schottky barrier height etc. The nature of the interface plays an important role in the stability of the contacts due to problems associated with interdiffusion and compound formation at the interface during device fabrication. Contacts of pure metal thin films on GaAs are not desirable due to the presence of the native oxide and surface defects at the interface. Nickel has been used as a contact metal on GaAs and has been found to be reactive at low temperatures. Formation Of Ni2 GaAs at 200 - 350C is reported and is found to grow epitaxially on (001) and on (111) GaAs, but is shown to be unstable at 450C. This paper reports the investigations carried out to understand the microstructure, nature of the interface and composition of sputter deposited and annealed (at different temperatures) Ni-Sb ohmic contacts on GaAs by TEM. Attempts were made to correlate the electrical properties of the films such as the sheet resistance and contact resistance, with the microstructure. The observations are corroborated by Scanning Auger Microprobe (SAM) investigations.


2017 ◽  
Vol 87 (3-4) ◽  
pp. 191-200 ◽  
Author(s):  
Nidhal Soualeh ◽  
Aliçia Stiévenard ◽  
Elie Baudelaire ◽  
Rachid Soulimani ◽  
Jaouad Bouayed

Abstract. In this study, cytoprotective and antioxidant activities of Rosa canina (RC) and Salix alba (SA), medicinal plants, were studied on mouse primary splenocytes by comparing Controlled Differential Sieving process (CDSp), which is a novel green solvent-free process, versus a conventional technique, employing hydroethanolic extraction (HEE). Thus, preventive antioxidant activity of three plant powders of homogeneous particle sizes, 50–100 µm, 100–180 µm and 180–315 µm, dissolved directly in the cellular buffer, were compared to those of hydroethanolic (HE) extract, at 2 concentrations (250 and 500 µg/mL) in H2O2-treated spleen cells. Overall, compared to HE extract, the superfine powders, i. e., fractions < 180 µm, at the lowest concentration, resulted in greater reactive oxygen species (ROS) elimination, increased glutathione peroxidase (GPx) activity and lower malondialdehyde (MDA) production. Better antioxidant and preventive effects in pre-treated cells were found with the superfine powders for SA (i. e., 50–100 µm and 100–180 µm, both p < 0.001), and with the intermediate powder for RC (i. e., 100–180 µm, p < 0.05) versus HE extract. The activity levels of catalase (CAT) and superoxide dismutase (SOD) in pretreated splenocytes exposed to H2O2, albeit reduced, were near to those in unexposed cells, suggesting that pretreatment with the fine powders has relatively restored the normal levels of antioxidant-related enzymes. These findings supported that CDSp improved the biological activities of plants, avoiding the use of organic solvents and thus it could be a good alternative to conventional extraction techniques.


2020 ◽  
Author(s):  
Dung Do

<p>Chiral molecules with their defined 3-D structures are of paramount importance for the study of chemical biology and drug discovery. Having rich structural diversity and unique stereoisomerism, chiral molecules offer a large chemical space that can be explored for the design of new therapeutic agents.<sup>1</sup> Practically, chiral architectures are usually prepared from organometallic and organocatalytic processes where a transition metal or an organocatalyst is tailor-made for desired reactions. As a result, developing a method that enables rapid assembly of chiral complex molecules under metal- and organocatalyst-free condition represents a daunting challenge. Here we developed a straightforward route to create a chiral 3-D structure from 2-D structures and an amino acid without any chiral catalyst. The center of this research is the design of a <a>special chiral spiroimidazolidinone cyclohexadienone intermediate</a>, a merger of a chiral reactive substrate with multiple nucleophillic/electrophillic sites and a transient organocatalyst. <a>This unique substrate-catalyst (“subcatalyst”) dual role of the intermediate enhances </a><a>the coordinational proximity of the chiral substrate and catalyst</a> in the key Aza-Michael/Michael cascade resulting in a substantial steric discrimination and an excellent overall diastereoselectivity. Whereas the “subcatalyst” (hidden catalyst) is not present in the reaction’s initial components, which renders a chiral catalyst-free process, it is strategically produced to promote sequential self-catalyzed reactions. The success of this methodology will pave the way for many efficient preparations of chiral complex molecules and aid for the quest to create next generation of therapeutic agents.</p>


Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 628
Author(s):  
Adolfo Benedito ◽  
Eider Acarreta ◽  
Enrique Giménez

The present paper describes a greener sustainable route toward the synthesis of NIPHUs. We report a highly efficient solvent-free process to produce [4,4′-bi(1,3-dioxolane)]-2,2′-dione (BDC), involving CO2, as renewable feedstock, and bis-epoxide (1,3-butadiendiepoxide) using only metal–organic frameworks (MOFs) as catalysts and cetyltrimethyl-ammonium bromide (CTAB) as a co-catalyst. This synthetic procedure is evaluated in the context of reducing global emissions of waste CO2 and converting CO2 into useful chemical feedstocks. The reaction was carried out in a pressurized reactor at pressures of 30 bars and controlled temperatures of around 120–130 °C. This study examines how reaction parameters such as catalyst used, temperature, or reaction time can influence the molar mass, yield, or reactivity of BDC. High BDC reactivity is essential for producing high molar mass linear non-isocyanate polyhydroxyurethane (NIPHU) via melt-phase polyaddition with aliphatic diamines. The optimized Al-OH-fumarate catalyst system described in this paper exhibited a 78% GC-MS conversion for the desired cyclic carbonates, in the absence of a solvent and a 50 wt % chemically fixed CO2. The cycloaddition reaction could also be carried out in the absence of CTAB, although lower cyclic carbonate yields were observed.


Author(s):  
Li Yang ◽  
Huiqing Hou ◽  
Lan Li ◽  
Jin Wang ◽  
Sunying Zhou ◽  
...  

An efficient and practical electrochemical-catalyzed transition metal-free process for the synthesis of substituted quinazolinones from simple and readily available o-aminobenzonitriles and aldehydes in water has been accomplished. I2/base and water...


2021 ◽  
Vol 11 (6) ◽  
pp. 2729
Author(s):  
Chien-Hua Lin ◽  
Ming-Che Lu ◽  
Su-Fen Yang ◽  
Ming-Yung Lee

Automation in the service industry is emerging as a new wave of industrial revolution. Standardization and consistency of service quality is an important part of the automation process. The quality control methods widely used in the manufacturing industry can provide service quality measurement and service process monitoring. In particular, the control chart as an online monitoring technique can be used to quickly detect whether a service process is out of control. However, the control of the service process is more difficult than that of the manufacturing process because the variability of the service process comes from widespread and complex factors. First of all, the distribution of the service process is usually non-normal or unknown. Moreover, the skewness of the process distribution can be time-varying, even if the process is in control. In this study, a Bayesian procedure is applied to construct a Phase II exponential weighted moving average (EWMA) control chart for monitoring the variance of a distribution-free process. We explore the sampling properties of the new monitoring statistic, which is suitable for monitoring the time-varying process distribution. The average run lengths (ARLs) of the proposed Bayesian EWMA variance chart are calculated, and they show that the chart performs well. The simulation studies for a normal process, exponential process, and the mixed process of normal and exponential distribution prove that our chart can quickly detect any shift of a process variance. Finally, a numerical example of bank service time is used to illustrate the application of the proposed Bayesian EWMA variance chart and confirm the performance of the process control.


Sign in / Sign up

Export Citation Format

Share Document