A LABORATORY WORK WITH BIOMASS: A CEMENT REPLACEMENT MATERIAL IN CONCRETE MIX

2016 ◽  
Vol 78 (5) ◽  
Author(s):  
Noor Faisal Abas
Keyword(s):  
Waste Management ◽  
Raw Materials ◽  
Biomass Ash ◽  
Biomass Waste ◽  
Great Opportunity ◽  
Cement Production ◽  
Cement Replacement ◽  
Increasing Demand ◽  
Near Future ◽  
Effective Result

The cement production facing the current environmental issue like CO2 emission and scarcity of raw materials, burning of higher amount fossil fuel for production and rapidly increasing demand for cement and concrete can be of a greater problem in the near future. On the other hand there is an ongoing issue of biomass waste management, so there is great opportunity for biomass ash to be used as a cement replacement material as many ongoing researches suggest. This can help to cut down the production of cement and with waste management. The pozzolanic characteristic of several biomass ash can be advantageous, and if the required strength of concrete can be achieved with a certain amount of replacement of cement with biomass ash, then this can be used widely if allowed by structural codes. This report explores the scope of biomass as a cement replacement material in several percentages (5%, 10%, 20%) and shows an effective result with 5 to 10% replacement as the cement with this percentage showed almost same engineering and durability properties like the traditional mix.

Co-Processing Hazardous Waste in the Chinese Cement Industry - Status 2014

2015 ◽  
Vol 768 ◽  
pp. 679-686 ◽  
Author(s):  
Juan Xu ◽  
Shao Feng Sun ◽  
Kårehelge Karstensen ◽  
Da Hai Yan ◽  
Zheng Peng
Keyword(s):  
Waste Management ◽  
Hazardous Waste ◽  
Alternative Fuels ◽  
Raw Materials ◽  
Cement Industry ◽  
Waste Generation ◽  
Cement Production ◽  
Management Capacity ◽  
The World

As China develops its economy, hazardous waste generation is expected to increase rapidly. Recovery and recycling, i.e. co-processing of Alternative Fuels and Raw materials (AFRs) and treatment of hazardous waste in energy-and resource-intensive industries such as the cement industry seems to be an supplementary option to conventional technologies which can increase the overall waste management capacity in China significantly. With the largest cement production in the world, the industry can save significant amounts of non-renewable coal and raw materials by substitution with wastes which needs treatment. However, co-processing requires appropriate regulations and policies to support its development and safe and sound implementation.

scholarly journals Vermicomposting: Tool for Sustainable Ruminant Manure Management

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
A. Nasiru ◽  
N. Ismail ◽  
M. H. Ibrahim
Keyword(s):  
Waste Management ◽  
Physicochemical Properties ◽  
Health Risks ◽  
Agricultural Soils ◽  
Raw Materials ◽  
Biological Properties ◽  
Biochemical Properties ◽  
Manure Management ◽  
Biomass Waste ◽  
Solid Biomass

Ruminants are important sources of meat and milk. Their production is associated with manure excretion. Estimates of over 3,900,000 million metric tonnes of manure are produced daily from ruminants worldwide. Storage and spread of this waste on land pose health risks and environmental problems. Efficient and sustainable way of handling ruminant manure is required. Composting and vermicomposting are considered two of the best techniques for solid biomass waste management. This paper presents vermicomposting as an effective tool for ruminant manure management. Vermicomposting is a mesophilic biooxidation and stabilisation process of organic materials that involves the joint action of earthworm and microorganism. Compared with composting, vermicomposting has higher rate of stabilisation and it is greatly modifying its physical and biochemical properties, with low C : N ratio and homogenous end product. It is also costeffective and ecofriendly waste management. Due to its innate biological, biochemical and physicochemical properties, vermicomposting can be used to promote sustainable ruminant manure management. Vermicomposts are excellent sources of biofertiliser and their addition improves the physiochemical and biological properties of agricultural soils. In addition, earthworms from the vermicomposting can be used as source of protein to fishes and monogastric animals. Vermicompost can also be used as raw materials for bioindustries.

Solid Waste Management on Romanian Households

2018 ◽  
Vol 68 (12) ◽  
pp. 2941-2947
Author(s):  
George Ungureanu ◽  
Gabriela Ignat ◽  
elena Leonte ◽  
Carmen Luiza Costuleanu ◽  
Nicoleta Stanciu ◽  
...  
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Agricultural Development ◽  
Management Practices ◽  
Solid Waste Management ◽  
Raw Materials ◽  
Rapid Development ◽  
Disposal Site ◽  
Solid Waste Disposal ◽  
Factors Affecting

The problem associated with the household behavior on solid waste disposal site in today�s society is complex because of the large quantity and diverse nature of the wastes. Due increase the population, rapid development, global agricultural development has moved rapidly, limitations of financing, emerging limitations of both energy and raw materials and also add to the complexity of any waste management system, large quantities of wastes are being generated in different forms such as solid, liquid and gases. This research explored factors affecting the level of participation in solid waste segregation and recycling of households in Romania, as well as examining current Romania households waste management practices and their knowledge of waste management. This study investigated the solid waste situation and the organization of solid waste management in both urban and rural settings from the perspective of households. Solid waste management is a key component of public services which needs to serve the urban and rural municipalities in an efficient way in order to maintain a decent standard of public health.

Pendayagunaan Sampah Menjadi Produk Kerajinan

2017 ◽  
Vol 17 (1) ◽  
pp. 83
Author(s):  
Nur Fatoni ◽  
Rinaldy Imanuddin ◽  
Ahmad Ridho Darmawan
Keyword(s):  
Waste Management ◽  
Raw Materials ◽  
Economic Value ◽  
Waste Materials ◽  
Waste Collection ◽  
Garbage Disposal ◽  
Waste Separation ◽  
And Training

Waste management is still defined as limited to collection, transportation and garbage disposal. The follow-up of the meaning is the provision of facilities such as garbage bins, garbage trucks and waste collection land. Waste management has not included waste separation. Segregation of waste can minimize the amount of waste that must be discharged to the final place. Segregation of waste can supply recyclable raw materials and handicrafts made from garbage. The manufacture of handicraft products from garbage is still local and requires socialization and training. It is needed to increase the number of craftsmen and garbage absorption on the crafters. Through careful socialization and training, citizens' awareness of waste management becomes advanced by making handicrafts of economic value from waste materials.

scholarly journals Tenebrio molitor in the circular economy: a novel approach for plastic valorisation and PHA biological recovery

2021 ◽  
Author(s):  
Paola Sangiorgio ◽  
Alessandra Verardi ◽  
Salvatore Dimatteo ◽  
Anna Spagnoletta ◽  
Stefania Moliterni ◽  
...  
Keyword(s):  
Circular Economy ◽  
Raw Materials ◽  
Economic Value ◽  
Tenebrio Molitor ◽  
World Population ◽  
Plastic Pollution ◽  
Biological Recovery ◽  
Great Opportunity ◽  
Novel Approach ◽  
The One

AbstractThe increase in the world population leads to rising demand and consumption of plastic raw materials; only a small percentage of plastics is recovered and recycled, increasing the quantity of waste released into the environment and losing its economic value. The plastics represent a great opportunity in the circular perspective of their reuse and recycling. Research is moving, on the one hand, to implement sustainable systems for plastic waste management and on the other to find new non-fossil-based plastics such as polyhydroxyalkanoates (PHAs). In this review, we focus our attention on Tenebrio molitor (TM) as a valuable solution for plastic biodegradation and biological recovery of new biopolymers (e.g. PHA) from plastic-producing microorganisms, exploiting its highly diversified gut microbiota. TM’s use for plastic pollution management is controversial. However, TM microbiota is recognised as a source of plastic-degrading microorganisms. TM-based plastic degradation is improved by co-feeding with food loss and waste as a dietary energy source, thus valorising these low-value substrates in a circular economy perspective. TM as a bioreactor is a valid alternative to traditional PHA recovery systems with the advantage of obtaining, in addition to highly pure PHA, protein biomass and rearing waste from which to produce fertilisers, chitin/chitosan, biochar and biodiesel. Finally, we describe the critical aspects of these TM-based approaches, mainly related to TM mass production, eventual food safety problems, possible release of microplastics and lack of dedicated legislation.

scholarly journals How Far Away Are World Economies from Circularity: Assessing the Capacity of Circular Economy Policy Packages in the Operation of Raw Materials and Industrial Wastes

2021 ◽  
Vol 13 (8) ◽  
pp. 4394
Author(s):  
Margarita Ignatyeva ◽  
Vera Yurak ◽  
Alexey Dushin ◽  
Vladimir Strovsky ◽  
Sergey Zavyalov ◽  
...  
Keyword(s):  
The Netherlands ◽  
Waste Management ◽  
South Korea ◽  
Circular Economy ◽  
Raw Materials ◽  
Industrial Wastes ◽  
New Guidelines ◽  
The 1960S ◽  
Degree Level ◽  
The Eu

Nowadays, circular economy (CE) is on the agenda, however, this concept of closed supply chains originated in the 1960s. The current growing quantity of studies in this area accounts for different discourses except the holistic one, which mixes both approaches—contextual and operating (contextual approach utilizes the thorough examination of the CE theory, stricture of the policy, etc.; the operating one uses any kind of statistical data)—to assess the capacity of circular economy regulatory policy packages (CERPP) in operating raw materials and industrial wastes. This article demonstrates new guidelines for assessing the degree level of capacity (DLC) of CERPPs in the operation of raw materials and industrial wastes by utilizing the apparatus of the fuzzy set theory. It scrupulously surveys current CERPPs in three regions: the EU overall, Finland and Russia; and assesses for eight regions—the EU overall, Finland, Russia, China, Greece, France, the Netherlands and South Korea—the DLC of CERPPs in operating raw materials and industrial wastes. The results show that EU is the best in CE policy and its CERPP is 3R. The following are South Korea and China with the same type of CERPP. Finland, France and the Netherlands have worse results than EU with the type of CERPP called “integrated waste management” because of the absence of a waste hierarchy (reduce, recover, recycle). Russia closes the list with the type of CERPP “basic waste management”.

scholarly journals Global Warming Potential of a New Waterjet-Based Recycling Process for Cathode Materials of Lithium-Ion Batteries

Batteries ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 29
Author(s):  
Leonard Kurz ◽  
Mojtaba Faryadras ◽  
Ines Klugius ◽  
Frederik Reichert ◽  
Andreas Scheibe ◽  
...  
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Waste Treatment ◽  
Raw Materials ◽  
Lithium Ion ◽  
Primary Data ◽  
Recycling Process ◽  
Use Of Resources ◽  
Mechanical Removal ◽  
Increasing Demand

Due to the increasing demand for battery electric vehicles (BEVs), the need for vehicle battery raw materials is increasing. The traction battery (TB) of an electric vehicle, usually a lithium-ion battery (LIB), represents the largest share of a BEV’s CO2 footprint. To reduce this carbon footprint sustainably and to keep the raw materials within a closed loop economy, suitable and efficient recycling processes are essential. In this life cycle assessment (LCA), the ecological performance of a waterjet-based direct recycling process with minimal use of resources and energy is evaluated; only the recycling process is considered, waste treatment and credits for by-products are not part of the analysis. Primary data from a performing recycling company were mainly used for the modelling. The study concludes that the recycling of 1 kg of TB is associated with a global warming potential (GWP) of 158 g CO2 equivalents (CO2e). Mechanical removal using a water jet was identified as the main driver of the recycling process, followed by an air purification system. Compared to conventional hydro- or pyrometallurgical processes, this waterjet-based recycling process could be attributed an 8 to 26 times lower GWP. With 10% and 20% reuse of recyclate in new cells, the GWP of TBs could be reduced by 4% and 8%, respectively. It has been shown that this recycling approach can be classified as environmentally friendly.

Reduce, Reuse, Recycle and Recovery in Sustainable Construction Waste Management

2012 ◽  
Vol 446-449 ◽  
pp. 937-944 ◽  
Author(s):  
M.A Kazerooni Sadi ◽  
Arham Abdullah ◽  
Masoud Navazandeh Sajoudi ◽  
M.F.M. Kamal ◽  
Fatemeh Torshizi ◽  
...  
Keyword(s):  
Waste Management ◽  
Construction Industry ◽  
Raw Materials ◽  
Waste Minimization ◽  
Sustainable Construction ◽  
Construction Waste ◽  
Management Processes ◽  
Waste Minimisation ◽  
Minimization Technique ◽  
Local Construction

The construction industry consumes a substantial amount of raw materials in its processes and the output is obviously the product and most importantly the waste material. Other than that, the construction industry is well known as one of the worst environmental polluters. This study is to determine the use of waste minimisation technique in creating sustainable waste management in order to identify the technique which has the most capabilities to reduce on-site waste. The objective of this study is to assess the waste minimization techniques taken from the 4R concept (which includes reduce, reuse, recycle and recovery techniques) in minimizing the waste in construction waste management. The most used waste minimization technique found in the 4R concept would be waste reduction. This shows that the local construction industry has the knowledge necessary to plan out the waste management processes but the implementation is still far from satisfying. Additionally, the findings reveal that because the industry is profit-driven, construction practitioners are motivated by profit to adapt to this techniques.

scholarly journals Extraction and Characterization of Gelatin from Skin By-Products of Seabream, Seabass and Rainbow Trout Reared in Aquaculture

2021 ◽  
Vol 22 (22) ◽  
pp. 12104
Author(s):  
Jesus Valcarcel ◽  
Carolina Hermida-Merino ◽  
Manuel M. Piñeiro ◽  
Daniel Hermida-Merino ◽  
José Antonio Vázquez
Keyword(s):  
Molecular Weight ◽  
Rainbow Trout ◽  
Raw Materials ◽  
Gel Strength ◽  
Current Trends ◽  
First Case ◽  
Imino Acids ◽  
Increasing Demand ◽  
A Minor ◽  
By Products

The expansion of fish filleting, driven by the increasing demand for convenience food, concomitantly generates a rising amount of skinning by-products. Current trends point to a growing share of aquaculture in fish production, so we have chosen three established aquaculture species to study the properties of gelatin extracted from their skin: rainbow trout, commonly filleted; and seabass and seabream, marketed whole until very recently. In the first case, trout skin yields only 1.6% gelatin accompanied by the lowest gel strength (96 g bloom), while yield for the other two species exceeds 6%, and gel strength reaches 181 and 229 g bloom for seabass and seabream, respectively. These results are in line with the proportion of total imino acids analyzed in the gelatin samples. Molecular weight profiling shows similarities among gelatins, but seabass and seabream gelatins appear more structured, with higher proportion of β-chains and high molecular weight aggregates, which may influence the rheological properties observed. These results present skin by-products of seabream, and to a minor extent seabass, as suitable raw materials to produce gelatin through valorization processes.

Sign in / Sign up

Export Citation Format

Share Document