Cellulose Acetate Textile Fiber Filtration System Applied for Pre-Treatment of Surface Water

This study aimed to evaluate a nonwoven (NW) production and performance from cellulose acetate fiber from cigarette butts andapplied to a filtration system for surface water pre-treatment. The system had a surface area of 692 cm³, cellulose acetate from cigarette butt as filter media, was used and was fed with surface water from a pond. In order to evaluate the treatment performance of the filtration system were evaluated in the raw water (RW) and the filtered water (FW) the classical parameter of water quality as turbidity, total suspended solids (TSS), apparent color, true color, and total organic carbon (TOC) and heavy metals (iron, copper, and cadmium). Moreover, the presence of nicotine was investigated in the FW. The results showed a mean removal efficiency in order to 62.01%, 54.42%, 50.36 %, 6.73%, and 5.20% for turbidity, TSS, apparent color, true color, and TOC, respectively. The removal of metals varied in the order of 72.26%, 9.61%, and 2.12% for cadmium, iron, and copper, respectively. The presence of nicotine in RW and FW was not identified. In this way, besides reducing the negative environmental impacts caused by cigarette butts present in the environment, the developed technology showed potential for removing pollutants present in surface waters.

Download Full-text

Inverse Margin Filtration Applied for Surface Water Treatment

Anuário do Instituto de Geociências - UFRJ ◽

10.11137/1982-3908_2021_44_40923 ◽

2021 ◽

Vol 44 ◽

Author(s):

Sergio Luiz Bello ◽

Thyara Campos Martin Nonato ◽

Paulo Belli Filho ◽

Augusto Oliveira Neto ◽

Maurício Luiz Sens

Keyword(s):

Water Treatment ◽

Surface Water ◽

Quality Parameters ◽

Fecal Coliforms ◽

Surface Water Treatment ◽

Treatment Performance ◽

Filtration System ◽

Apparent Color ◽

True Color ◽

The Imf

Technologies to be applied under the context of protection and revitalization of surface water must be developed and improved in order to enhance the quality of aquatic ecosystems. In this way, this study aimed to evaluate the treatment performance of an inverse margin filtration system (IMF) applied in surface water treatment. The IMF was monitored during 1 year through the classic water quality parameters, and thus the treatment performance along the filtration path was identified. The results showed an average removal efficiency of 41% for turbidity, 35% for apparent color, 43% for true color, 26% for total suspended solids and total organic carbon, 53% for nitrogen, 46% for phosphorus, 91% for iron, 8% for manganese, and 100% for fecal coliforms. In this way, the IMF system proved to be a technology that can be applied in the treatment of water in lentic environments.

Download Full-text

Controlling Sediment and Nutrient Losses from Agricultural Lands

Journal of the Northeastern Agricultural Economics Council ◽

10.1017/s0163548400000224 ◽

1972 ◽

Vol 1 (01) ◽

pp. 94-109 ◽

Cited By ~ 1

Author(s):

James J. Jacobs

Keyword(s):

Surface Water ◽

Water Resource ◽

Surface Waters ◽

Phosphorus Content ◽

Nutrient Losses ◽

Agricultural Lands ◽

Nitrogen And Phosphorus ◽

And Performance ◽

Phosphorus Losses

Quality of the environment is measured and evaluated by some criteria, such as composition, and by performance. However, quality, in terms of composition and/or performance, as a factor in environment has no meaning except as it relates to some use of the environment and scale of health, happiness and aspirations of man. For example, an environment is regarded as having a lower quality than 15 years ago because of an increase in the phosphorus contained in surface water and/or a change in the species of fish present in surface waters. In terms of performance, a particular environment (watershed) is not producing enough because the soil and phosphorus losses are twice the acceptable rate. Furthermore, the composition and performance of an environment are related. Measurement of the nitrogen and phosphorus content of water helps to determine if a given water resource can be used (perform) in a particular way.

Download Full-text

Micro-Polluted Surface Water Treated by Yeast-Chitosan Bio-Microcapsules

Materials ◽

10.3390/ma13163519 ◽

2020 ◽

Vol 13 (16) ◽

pp. 3519

Author(s):

Xiao Liu ◽

Lin Wang ◽

Jun Shi

Keyword(s):

Surface Water ◽

Surface Waters ◽

Removal Rate ◽

Ammonia Nitrogen ◽

Temporary Increase ◽

Engineering Applications ◽

Preparation Conditions ◽

Pre Treatment ◽

Excessive Accumulation

Ammonia nitrogen and natural organic matter (NOM) seriously degrade the quality of surface waters. In this study, the optimum preparation conditions of a yeast-chitosan bio-microcapsule of the Candida tropicalis strain, used to treat micro-polluted surface water, were investigated. Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize the bio-microcapsules. A continuous laboratory-scale reaction apparatus was built to evaluate the engineering applications of the bio-microcapsules and their treatment efficiency for major pollutants in micro-polluted raw water. The yeast-chitosan bio-microcapsules were found to rapidly and effectively remove suspended solids and ammonia nitrogen. Moreover, the bio-microcapsule pre-treatment process was capable of resisting impact loads and fluctuations in water quality. Even at low temperatures (12 °C), the removal rate of ammonia nitrogen still reached 79%. The treatment did not lead to a temporary increase in nitrite concentration, nor to the excessive accumulation of nitrogen. The application of bio-microcapsules is simple; it only requires aeration and certain nutrient substrates, and can be adapted to treat raw drinking water with a poor nutrient substrate, therefore showing promise for future use in engineering applications.

Download Full-text

Natural Organic Matter Removal from Raw Surface Water: Benchmarking Performance of Chemical Coagulants through Excitation-Emission Fluorescence Matrix Spectroscopy Analysis

Water ◽

10.3390/w13020146 ◽

2021 ◽

Vol 13 (2) ◽

pp. 146

Author(s):

Raymond John C. Go ◽

Hui-Ling Yang ◽

Chi-Chuan Kan ◽

Dennis C. Ong ◽

Sergi Garcia-Segura ◽

...

Keyword(s):

Organic Matter ◽

Surface Water ◽

Natural Organic Matter ◽

Surface Waters ◽

Polyaluminum Chloride ◽

Coagulant Dosage ◽

Initial Ph ◽

Pre Treatment ◽

By Products ◽

Chemical Disinfection

Chemical disinfection of surface waters has been proven effective in minimizing the risk of contamination by water-borne pathogens. However, surface waters contain natural organic matter (NOM) which, upon chemical disinfection, is readily converted into hazardous disinfection-by-products. Hence, NOM removal from these waters is critical. Chemical coagulation is a readily implementable technology to minimize these undesired side-effects by NOM removal. Herein, capabilities of ferric chloride (FeCl3) and polyaluminum chloride (PACl) as pre-treatment for NOM abatement from natural raw surface water have been benchmarked. Excitation-emission fluorescence matrix (EEM) spectroscopy characterization of NOM fractions demonstrated high removal efficiency. A two-level full factorial design was employed to analyze the effects of coagulant dosage and initial pH on the removal of turbidity, humic acid-like substances and fulvic acid-like substances from the raw water. Higher removal of ~77% NOM was attained with PACl than with FeCl3 (~72%). Optimization through response surface methodology showed that the initial pH—coagulant dosage interaction was significant in removing NOM and turbidity for both PACl and FeCl3. These results identify the opportunity for coagulation technologies to prevent and minimize disinfection-by-products formation through NOM removal.

Download Full-text

Low-pressure membrane filtration with unconventional coagulation regimes

Water Science & Technology Water Supply ◽

10.2166/ws.2005.0032 ◽

2005 ◽

Vol 5 (5) ◽

pp. 1-8 ◽

Cited By ~ 1

Author(s):

K.Y. Choi ◽

B.A. Dempsey

Keyword(s):

Activated Carbon ◽

Membrane Filtration ◽

Membrane Surface ◽

Cross Flow ◽

Chemical Cleaning ◽

Sand Filters ◽

Charge Neutralization ◽

Floc Size ◽

Filtration System ◽

Pre Treatment

The objective of the research was to evaluate in-line coagulation to improve performance during ultrafiltration (UF). In-line coagulation means use of coagulants without removal of coagulated solids prior to UF. Performance was evaluated by removal of contaminants (water quality) and by resistance to filtration and recovery of flux after hydraulic or chemical cleaning (water production). We hypothesized that coagulation conditions inappropriate for conventional treatment, in particular under-dosing conditions that produce particles that neither settle nor are removed in rapid sand filters, would be effective for in-line coagulation prior to UF. A variety of pre-treatment processes for UF have been investigated including coagulation, powdered activated carbon (PAC) or granular activated carbon (GAC), adsorption on iron oxides or other pre-formed settleable solid phases, or ozonation. Coagulation pre-treatment is often used for removal of fouling substances prior to NF or RO. It has been reported that effective conventional coagulation conditions produced larger particles and this reduced fouling during membrane filtration by reducing adsorption in membrane pores, increasing cake porosity, and increasing transport of foulants away from the membrane surface. However, aggregates produced under sweep floc conditions were more compressible than for charge neutralization conditions, resulting in compaction when the membrane filtration system was pressurized. It was known that the coagulated suspension under either charge-neutralization or sweep floc condition showed similar steady-state flux under the cross-flow microfiltration mode. Another report on the concept of critical floc size suggested that flocs need to reach a certain critical size before MF, otherwise membranes can be irreversibly clogged by the coagulant solids. The authors were motivated to study the effect of various coagulation conditions on the performance of a membrane filtration system.

Download Full-text

Groundwater protection and diffuse nitrogen emissions to surface waters – which catchment areas have to be considered?

Water Science & Technology Water Supply ◽

10.2166/ws.2007.072 ◽

2007 ◽

Vol 7 (3) ◽

pp. 103-110

Author(s):

C. Schilling ◽

M. Zessner ◽

A.P. Blaschke ◽

D. Gutknecht ◽

H. Kroiss

Keyword(s):

Surface Water ◽

Total Nitrogen ◽

Surface Waters ◽

Flow Path ◽

Emission Model ◽

Catchment Scale ◽

Danube Basin ◽

Nitrogen Emissions ◽

Nitrogen Levels ◽

Catchment Areas

Two Austrian case study regions within the Danube basin have been selected for detailed investigations of groundwater and surface water quality at the catchment scale. Water balance calculations have been performed using the conceptual continuous time SWAT 2000 model to characterise catchment hydrology and to identify individual runoff components contributing to river discharge. Nitrogen emission calculations have been performed using the empirical emission model MONERIS to relate individual runoff components to specific nitrogen emissions and for the quantification of total nitrogen emissions to surface waters. Calculated total nitrogen emissions to surface waters using the MONERIS model were significantly influenced by hydrological conditions. For both catchments the groundwater could be identified as major emission pathway of nitrogen emissions to the surface waters. Since most of the nitrogen is emitted by groundwater to the surface water, denitrification in groundwater is of considerable importance reducing nitrogen levels in groundwater along the flow path towards the surface water. An approach was adopted for the grid-oriented estimation of diffuse nitrogen emissions based on calculated groundwater residence time distributions. Denitrification in groundwater was considered using a half life time approach. It could be shown that more than 90% of the total diffuse nitrogen emissions were contributed by areas with low groundwater residence times and short distances to the surface water. Thus, managing diffuse nitrogen emissions the location of catchment areas has to be considered as well as hydrological and hydrogeological conditions, which significantly influence denitrification in the groundwater and reduce nitrogen levels in groundwater on the flow path towards the surface water.

Download Full-text

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

Foods ◽

10.3390/foods10071437 ◽

2021 ◽

Vol 10 (7) ◽

pp. 1437

Author(s):

Jing Yi Ong ◽

Andrew Pike ◽

Ling Ling Tan

Keyword(s):

Quantitative Analysis ◽

Animal Feed ◽

Cost Effective ◽

Preventive Action ◽

High Affinity ◽

Recent Advances ◽

Recognition Elements ◽

Key Features ◽

Pre Treatment ◽

And Performance

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

Download Full-text

Microplastics distribution in the Eurasian Arctic is affected by Atlantic waters and Siberian rivers

Communications Earth & Environment ◽

10.1038/s43247-021-00091-0 ◽

2021 ◽

Vol 2 (1) ◽

Cited By ~ 1

Author(s):

Evgeniy Yakushev ◽

Anna Gebruk ◽

Alexander Osadchiev ◽

Svetlana Pakhomova ◽

Amy Lusher ◽

...

Keyword(s):

Surface Water ◽

Surface Waters ◽

Water Masses ◽

The Arctic ◽

Plastic Pollution ◽

Siberian River ◽

Highest Weight ◽

Surface Samples ◽

Atlantic Origin ◽

Type Size

AbstractPlastic pollution is globally recognised as a threat to marine ecosystems, habitats, and wildlife, and it has now reached remote locations such as the Arctic Ocean. Nevertheless, the distribution of microplastics in the Eurasian Arctic is particularly underreported. Here we present analyses of 60 subsurface pump water samples and 48 surface neuston net samples from the Eurasian Arctic with the goal to quantify and classify microplastics in relation to oceanographic conditions. In our study area, we found on average 0.004 items of microplastics per m3 in the surface samples, and 0.8 items per m3 in the subsurface samples. Microplastic characteristics differ significantly between Atlantic surface water, Polar surface water and discharge plumes of the Great Siberian Rivers, allowing identification of two sources of microplastic pollution (p < 0.05 for surface area, morphology, and polymer types). The highest weight concentration of microplastics was observed within surface waters of Atlantic origin. Siberian river discharge was identified as the second largest source. We conclude that these water masses govern the distribution of microplastics in the Eurasian Arctic. The microplastics properties (i.e. abundance, polymer type, size, weight concentrations) can be used for identification of the water masses.

Download Full-text