Mechanical Aspects of the Dynamic Tear Test

1969 ◽  
Vol 91 (3) ◽  
pp. 535-543 ◽  
Author(s):  
G. E. Nash ◽  
E. A. Lange
Keyword(s):  
Crack Initiation ◽  
Bending Moments ◽  
Simple Analysis ◽  
Transverse Beam ◽  
Fracture Characteristics ◽  
Impact Forces ◽  
Impact Problems ◽  
The Impact

The impact forces and specimen bending moments generated during the NRL dynamic tear test are interpreted in terms of the dynamics of the system and the fracture characteristics of the material. It is shown that the impact forces and bending moments up to the time of crack initiation can be predicted using a simple analysis based on Timoshenko’s treatment of transverse beam impact problems. This implies the possibility of using this analysis for dynamic KIc determinations.

Resolving the Unique Invariant Slip-Direction in Rigid Three-Dimensional Multi-Point Impacts at Stick-Slip Transitions

2018 ◽  
Author(s):  
Abhishek Chatterjee ◽  
Alan Bowling
Keyword(s):  
Single Point ◽  
Three Dimensional ◽  
Impact Behavior ◽  
Slip Direction ◽  
Stick Slip ◽  
Impact Forces ◽  
Post Impact ◽  
Impact Problems ◽  
Slip Transition ◽  
The Impact

This work presents a new approach for resolving the unique invariant slip direction at Stick-Slip Transition during impact. The solution method presented in this work is applicable to both single-point and multi-point impact problems. The proposed method utilizes rigid body constraints to resolve the impact forces at all collision points in terms of a single independent impact forces parameter. This work also uses an energetic coefficient of restitution to terminate impact events, thereby yielding energetically consistent post-impact behavior.

scholarly journals Experimental and Numerical Study of Fracture Behavior of Rock-Like Material Specimens with Single Pre-Set Joint under Dynamic Loading

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2690
Author(s):  
Bo Pan ◽  
Xuguang Wang ◽  
Zhenyang Xu ◽  
Lianjun Guo ◽  
Xuesong Wang
Keyword(s):  
Crack Initiation ◽  
Crack Propagation ◽  
Joint Angle ◽  
Simulation Software ◽  
Dissipated Energy ◽  
Energy Structure ◽  
Joint Angles ◽  
Crack Penetration ◽  
Before And After ◽  
The Impact

The Split Hopkinson Pressure Bar (SHPB) is an apparatus for testing the dynamic stress-strain response of the cement mortar specimen with pre-set joints at different angles to explore the influence of joint attitudes of underground rock engineering on the failure characteristics of rock mass structure. The nuclear magnetic resonance (NMR) has also been used to measure the pore distribution and internal cracks of the specimen before and after the testing. In combination with numerical analysis, the paper systematically discusses the influence of joint angles on the failure mode of rock-like materials from three aspects of energy dissipation, microscopic damage, and stress field characteristics. The result indicates that the impact energy structure of the SHPB is greatly affected by the pre-set joint angle of the specimen. With the joint angle increasing, the proportion of reflected energy moves in fluctuation, while the ratio of transmitted energy to dissipated energy varies from one to the other. NMR analysis reveals the structural variation of the pores in those cement specimens before and after the impact. Crack propagation direction is correlated with pre-set joint angles of the specimens. With the increase of the pre-set joint angles, the crack initiation angle decreases gradually. When the joint angles are around 30°–75°, the specimens develop obvious cracks. The crushing process of the specimens is simulated by LS-DYNA software. It is concluded that the stresses at the crack initiation time are concentrated between 20 and 40 MPa. The instantaneous stress curve first increases and then decreases with crack propagation, peaking at different times under various joint angles; but most of them occur when the crack penetration ratio reaches 80–90%. With the increment of joint angles in specimens through the simulation software, the changing trend of peak stress is consistent with the test results.

Considerations Concerning Vehicle Collisions Through Simplified Calculations of the Impact Forces

1996 ◽  
Author(s):  
Helcio Onusic ◽  
José Augusto P. Campos ◽  
Paulo Sergio P. dos Santos
Keyword(s):  
Vehicle Collisions ◽  
Impact Forces ◽  
The Impact

Suppressing Cracking in Resistance Welding AA5754 by Mechanical Means

2000 ◽  
Author(s):  
Hongyan Zhang ◽  
Jacek Senkara ◽  
Xin Wu
Keyword(s):  
Temperature Field ◽  
Crack Initiation ◽  
Spot Welding ◽  
Mechanical Analysis ◽  
Crack Initiation And Propagation ◽  
State Of Stress ◽  
Initiation And Propagation ◽  
Thermal Mechanical Analysis ◽  
The Impact ◽  
Analytical Approaches

Abstract In this paper mechanical aspects of cracking during single- and multi-spot welding of AA5754 was investigated by both experimental and analytical approaches. The impact of mechanical loading on crack initiation and propagation was studied with the consideration of various process parameters including the loading imposed by electrodes, the formation of liquid nugget, and constraining factors during and after welding. Tensile properties of AA5754 and their dependence on the temperature were tested at room and up to solidus temperatures, in order to provide a reference of cracking stress. Thermal-mechanical analysis was conducted based on the temperature field around the nugget and the state of stress encountered during welding. This analysis revealed that tensile stress might build up in the vicinity of the nugget during cooling, thus explained the experimental observation. General guidelines for suppressing cracking were proposed, i.e. to provide sufficient constraint around the weld spot during and after welding.

The Effects of Upstream Flexible Barrier on the Debris Flow Entrainment and Impact Dynamics on a Terminal Barrier

2021 ◽  
Author(s):  
Hervé Vicari ◽  
C.W.W. Ng ◽  
Steinar Nordal ◽  
Vikas Thakur ◽  
W.A. Roanga K. De Silva ◽  
...  
Keyword(s):  
Debris Flow ◽  
Debris Flows ◽  
Impact Force ◽  
Dynamic Pressure ◽  
Pressure Coefficient ◽  
Flexible Barrier ◽  
Impact Forces ◽  
Flexible Barriers ◽  
The Impact ◽  
Bed Entrainment

The destructive nature of debris flows is mainly caused by flow bulking from entrainment of an erodible channel bed. To arrest these flows, multiple flexible barriers are commonly installed along the predicted flow path. Despite the importance of an erodible bed, its effects are generally ignored when designing barriers. In this study, three unique experiments were carried out in a 28 m-long flume to investigate the impact of a debris flow on both single and dual flexible barriers installed in a channel with a 6 m-long erodible soil bed. Initial debris volumes of 2.5 m<sup>3</sup> and 6 m<sup>3</sup> were modelled. For the test setting adopted, a small upstream flexible barrier before the erodible bed separates the flow into several surges via overflow. The smaller surges reduce bed entrainment by 70% and impact force on the terminal barrier by 94% compared to the case without an upstream flexible barrier. However, debris overflowing the deformed flexible upstream barrier induces a centrifugal force that results in a dynamic pressure coefficient that is up to 2.2 times higher than those recommended in guidelines. This suggests that although compact upstream flexible barriers can be effective for controlling bed entrainment, they should be carefully designed to withstand higher impact forces.

scholarly journals Evolution of mantis shrimp telson armour and its role in ritualized fighting

2019 ◽  
Vol 16 (157) ◽  
pp. 20190203 ◽  
Author(s):  
Jennifer R. A. Taylor ◽  
Nina I. Scott ◽  
Greg W. Rouse
Keyword(s):  
Comparative Analysis ◽  
Impact Resistance ◽  
High Impact ◽  
Mantis Shrimp ◽  
Impact Forces ◽  
Drop Tests ◽  
Impact Parameters ◽  
Ritualized Combat ◽  
Stiff Spring ◽  
The Impact

Mantis shrimp possess both formidable weapons and impact-resistant armour that clash during ritualized combat. The telson is one of few biological structures known to withstand the repeated high impact forces of smashing mantis shrimp strikes, and it is hypothesized that this pairing of armour and weapon is associated with the evolution of telson sparring. We carried out a comparative analysis of telson impact mechanics across 15 mantis shrimp species to assess if the telsons of sparring species (i) are consistently specialized for impact-resistance, (ii) are more impact-resistant than those of non-sparring species, and (iii) have impact parameters that correlate with body size, and thereby useful for assessment. Our data from ball drop tests show that the telsons of all species function like a stiff spring that dissipates most of the impact energy, but none of the measured impact parameters are correlated with the occurrence of sparring behaviour. Impact parameters were correlated with body mass for only some species, suggesting that it is not broadly useful for size assessment during ritualized fighting. Contrary to expectation, sparring mantis shrimp do not appear to have coevolved telson armour that is more robust to impact than non-sparring species. Rather, telson structure is inherently impact-resistant.

scholarly journals Comparison of branded rugby headguards on their effectiveness in reducing impact on the head

2018 ◽  
Vol 4 (1) ◽  
pp. e000361 ◽  
Author(s):  
Erin R A Frizzell ◽  
Graham P Arnold ◽  
Weijie Wang ◽  
Rami J Abboud ◽  
Tim S Drew
Keyword(s):  
Impact Force ◽  
Linear Acceleration ◽  
Baseline Measurement ◽  
Peak Acceleration ◽  
Impact Forces ◽  
Impact Attenuation ◽  
The Mean ◽  
Force Reduction ◽  
The Right ◽  
The Impact

AimTo compare the available brands of rugby headguards and evaluate their impact attenuation properties at various locations on the cranium, with regard to concussion prevention.MethodsSeven different branded headguards were fitted onto a rigid headform and drop-tested in three different positions. An accelerometer measured the linear acceleration the headform experienced on impact with the ground. Each test involved dropping the headform from a height that generated 103.8 g on average when bare, which is the closest acceleration to the upper limit of the concussion threshold of 100 g. A mean peak acceleration for each drop position was calculated and compared with the bare baseline measurement.ResultsEach headguard demonstrated a significant decrease in the mean peak acceleration from the baseline value (all p≤0.01). Overall the Canterbury Ventilator was the most effective headguard, decreasing the impact force on average by 47%. The least effective was the XBlades Elite headguard, averaging a force reduction of 27%. In five of the seven headguards, the right side of the headwear was the most effective at reducing impact force.ConclusionOverall, the results indicate that it would be beneficial to wear a headguard during rugby in order to reduce the impact forces involved in head collisions. There was also a clear difference in performance between the tested brands, establishing the Canterbury headguard as the most effective. However, only one model of headguard from each brand was tested, so further research evaluating all other models should be considered.

scholarly journals A REVIEW ON THE IMPACT OF THE COVID-19 PANDEMIC ON THE HEALTH CARE SECTOR

2021 ◽  
pp. 1-6
Author(s):  
PRAJITHA BIJU ◽  
PALLAVI K. ◽  
VAGEESH REVADIGAR ◽  
SONAL DSOUZA ◽  
MOHAMMED ASIF IQBAL ◽  
...  
Keyword(s):  
Health Care ◽  
Initial Period ◽  
Health Care Sector ◽  
Healthcare Sector ◽  
Future Challenges ◽  
Artificial Intelligence Technology ◽  
Pharmaceutical Industries ◽  
Impact Problems ◽  
The One ◽  
The Impact

The global crisis of the present era, the COVID-19 pandemic, has changed given new normal ways in many of the sectors. The present review highlights the impact, problems, and challenges faced by major areas of the health care sector due to pandemics and also addresses some of the aspects of upcoming approaches. The healthcare sector is the one sector that is on-demand since this COVID-19 pandemic raised. During the initial period, there was disruption of various services provided by the health care sector due to supply chain management issues and reduction in demand by consumers, quarantine, and lockdown period. The healthcare workers also confronted a huge challenge due to the increased number of cases and shortage of amenities and safety measures. This significantly affected even COVID-19 patients and the general public suffering from other diseases. To fight this issue, research and development (RandD) in pharmaceutical industries with great efforts to explore molecules and save many lives. Gradually innovative ways to strengthen and combat pandemics started emerging. Numeral ways and rules were adopted to prevent, diagnose and cure the disease. Artificial intelligence technology has emerged as one of the boons to address many of the unresolved or time-consuming mysteries. All the divisions of health care sectors have started working more efficiently with adopted new strategies to face future challenges.

scholarly journals STUDY ON IMPACT FORCES OF THE UNDERWATER CAVITY PROJECTILE

2016 ◽  
Vol 54 (6) ◽  
pp. 797
Author(s):  
Nguyen Thai Dung ◽  
Nguyen Duc Thuyen
Keyword(s):  
Drag Force ◽  
Impact Force ◽  
Center Of Mass ◽  
Forward Direction ◽  
Cavity Wall ◽  
Impact Point ◽  
Impact Forces ◽  
Underwater Projectile ◽  
The Impact ◽  
Cavity Effect

The motion of the underwater projectile with cavity effect including two motions: the projectile moves in the forward direction, center of mass of the projectile rotation around its nose makes tail of the projectile impacts on the cavity wall. According to, the impact forces occur, they include the drag force at its none, the impact force at impact point. The paper studies the forces occur on during motion of the underwater cavity projectile. Added, this paper considers the effect of the length and distributive projectile to the magnitude of impact force and the drag force of the underwater cavity projectile.

Predicting the Impact Response of a Nonlinear Single-Degree-of-Freedom Shock-Absorbing System From the Measured Step Response

1997 ◽  
Vol 119 (3) ◽  
pp. 221-227 ◽  
Author(s):  
S. N. Robinovitch ◽  
W. C. Hayes ◽  
T. A. McMahon
Keyword(s):  
High Energy ◽  
Degree Of Freedom ◽  
Step Response ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Impact Forces ◽  
Standard Linear Solid ◽  
Standard Linear ◽  
The Impact ◽  
Measured Response

We measured the step response of a surrogate human pelvis/impact pendulum system at force levels between 50 and 350 N. We then fit measured response curves with four different single-degree-of-freedom models, each possessing a single mass, and supports of the following types: standard linear solid, Voigt, Maxwell, and spring. We then compared model predictions of impact force during high-energy collisions (pendulum impact velocity ranging from 1.16 to 2.58 m/s) to force traces from actual impacts to the surrogate pelvis. We found that measured peak impact forces, which ranged from 1700 to 5600 N, were best predicted by the mass-spring, Maxwell, and standard linear solid models, each of which had average errors less than 3 percent. Reduced accuracy was observed for the commonly used Voigt model, which exhibited an average error of 10 percent. Considering that the surrogate pelvis system used in this study exhibited nonlinear stiffness and damping similar to that observed in simulated fall impact experiments with human volunteers, our results suggest that these simple models allow impact forces in potentially traumatic falls to be predicted to within reasonable accuracy from the measured response of the body in safe, simulated collisions.

Sign in / Sign up

Export Citation Format

Share Document