Reuse Potential of Used Textiles for American Industries

2019 ◽  
Author(s):  
Asad Bashir ◽  
Abigail R. Clarke-Sather
Keyword(s):  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Energy Savings ◽  
Product Model ◽  
Co2 Equivalent ◽  
Cotton Textiles ◽  
Materials Recycling ◽  
Negative Impacts ◽  
The U.S

Abstract Increasing the recovery of textiles from municipal solid waste (MSW) is important for improving environmental sustainability. In 2015, over 10.5 million tons of textile waste was landfilled, which is 7.6% of total landfilled MSW according to the U.S. EPA. For all materials, recycling in the U.S. has increased over the past decade to 25.8% of the weight of the waste generated, textile recycling is below this level at 15.3%. This research quantifies the availability of used textiles by material type from Goodwill of Delaware (Goodwill-DE), a thrift store franchise, between 2012 and 2014. It examines the feasibility of recycling this amount of available discarded textiles, specifically cotton, into U.S. industrial subsectors that traditionally use new cotton textiles. A hybrid product model was created using EIO-LCA to compare economic and environmental impacts in the cut and sew apparel, airplane and automotive seating, upholstered furniture, and textile bag manufacturing industrial subsectors. Economic impacts on supply purchases and profits were considered. Environmental impacts in energy use and CO2 equivalent emissions were examined. As a result, utilizing all of Goodwill-DE’s annual discarded cotton textiles by the cut and sew apparel industrial subsectors would have positive impacts in terms of supply purchase and energy savings and reduction in CO2 equivalent emissions, but negative impacts on profits. Supply purchase savings are greater than the profit loss, resulting in a net economic gain for the cut and sew apparel industrial subsectors. Of the seven industrial subsectors considered, the U.S. cut and sew apparel industries would benefit the most from utilizing used cotton textiles.

scholarly journals Residential Land Use Change in the Wissahickon Creek Watershed: Profitability and Sustainability?

2019 ◽  
Vol 11 (21) ◽  
pp. 5933
Author(s):  
John Sorrentino ◽  
Mahbubur Meenar ◽  
Donald Wargo
Keyword(s):  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Water Quality Monitoring ◽  
Suitability Analysis ◽  
Delaware Valley ◽  
Environmental Consequences ◽  
Goods And Services ◽  
Creek Watershed ◽  
Residential Land Use

The Wissahickon Creek Watershed is one of five major watersheds in the Philadelphia metro region. The main objective of the work in this paper was to determine and compare the energy and environmental impacts of placing housing in the Watershed according to profitability and environmental sustainability criteria, respectively, in the context of increasing urbanization. Future population and employment for the Watershed have been projected by the Delaware Valley Regional Planning Commission. Housing requirements for the projected populations in each municipality were computed, and their location was influenced by the local zoning ordinances. Suitability analysis using ArcGIS 10.6 generated areas for development based alternatively on profitability and local sustainability. CommunityViz 5.2 Scenario 360 software was used to place buildings within the appropriately-zoned areas. Using Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET1 2018) software and water quality monitoring information from the Philadelphia Water Department, impacts were directly estimated. The impacts were related to effects on ecosystem functioning, ecosystem goods and services, and broad value estimated for the latter. The effects were used to indicate what might be appropriate policies to reduce the negative environmental consequences of residential development in the watershed. Unexpectedly, the environmental impacts of the profitable and sustainable scenarios were not very different. This suggests that profitability and sustainability need not be mutually exclusive.

scholarly journals Life Cycle Assessment on Different Synthetic Routes of ZIF-8 Nanomaterials

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4998
Author(s):  
Vasileios Ntouros ◽  
Ioannis Kousis ◽  
Dimitra Papadaki ◽  
Anna Laura Pisello ◽  
Margarita Niki Assimakopoulos
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Electricity Consumption ◽  
Research Activity ◽  
Synthetic Routes ◽  
The Impact

In the last twenty years, research activity around the environmental applications of metal–organic frameworks has bloomed due to their CO2 capture ability, tunable properties, porosity, and well-defined crystalline structure. Thus, hundreds of MOFs have been developed. However, the impact of their production on the environment has not been investigated as thoroughly as their potential applications. In this work, the environmental performance of various synthetic routes of MOF nanoparticles, in particular ZIF-8, is assessed through a life cycle assessment. For this purpose, five representative synthesis routes were considered, and synthesis data were obtained based on available literature. The synthesis included different solvents (de-ionized water, methanol, dimethylformamide) as well as different synthetic steps (i.e., hours of drying, stirring, precursor). The findings revealed that the main environmental weak points identified during production were: (a) the use of dimethylformamide (DMF) and methanol (MeOH) as substances impacting environmental sustainability, which accounted for more than 85% of the overall environmental impacts in those synthetic routes where they were utilized as solvents and as cleaning agents at the same time; (b) the electricity consumption, especially due to the Greek energy mix which is fossil-fuel dependent, and accounted for up to 13% of the overall environmental impacts in some synthetic routes. Nonetheless, for the optimization of the impacts provided by the energy use, suggestions are made based on the use of alternative, cleaner renewable energy sources, which (for the case of wind energy) will decrease the impacts by up to 2%.

Energy use in Canada: environmental impacts and opportunities in relationship to infrastructure systems

2005 ◽  
Vol 32 (1) ◽  
pp. 1-15 ◽  
Author(s):  
John Cuddihy ◽  
Christopher Kennedy ◽  
Philip Byer
Keyword(s):  
Waste Water ◽  
Energy Consumption ◽  
Environmental Impacts ◽  
Urban Form ◽  
Alternative Energy ◽  
Energy Use ◽  
Energy Savings ◽  
Building Design ◽  
Petroleum Products ◽  
Per Capita

Canada exhibits high per capita energy consumption. This paper examines energy use in Canada by region and sector, focusing on four sectors most relevant to civil engineering activities: residential, commercial–institutional, construction, and transportation. Environmental impacts associated with major energy sources including coal, petroleum products, natural gas and electricity are reviewed. The relationships between energy consumption and infrastructure design are analysed. Opportunities for reductions are identified in building design, water and waste-water systems, urban form, and transportation. Large improvements in commercial and residential energy efficiency can be achieved through the implementation of existing technologies in building upgrades, retrofits, and rebuilds. Increasing surface albedos and more extensive use of vegetative shading and consideration of the geometric properties of urban canyons and their microclimatic effects also allow for considerable energy savings. The incorporation of mixed-modal transit, walking and cycling paths, and community-scale design as elements of long-term transportation planning and the development of alternative transportation technologies have the potential to considerably reduce per capita energy use. The development and implementation of alternative energy supply technologies include energy recovery from waste-water treatment.Key words: energy, infrastructure, urban, sustainability, sustainable development.

scholarly journals Environmental Sustainability of Digitalization in Manufacturing: A Review

2020 ◽  
Vol 12 (24) ◽  
pp. 10298
Author(s):  
Xiaoxia Chen ◽  
Mélanie Despeisse ◽  
Björn Johansson
Keyword(s):  
Customer Service ◽  
Environmental Sustainability ◽  
Energy Use ◽  
Rapid Development ◽  
Literature Study ◽  
Information Efficiency ◽  
Design Production ◽  
Negative Environmental Impact ◽  
Negative Impacts ◽  
Technology Lifecycle

The rapid development and implementation of digitalization in manufacturing has enormous impact on the environment. It is still unclear whether digitalization has positive or negative environmental impact from applications in manufacturing. Therefore, this study aims to discuss the overall implications of digitalization on environmental sustainability through a literature study, within the scope of manufacturing (product design, production, transportation, and customer service). The analysis and categorization of selected articles resulted in two main findings: (1) Digitalization in manufacturing contributes positively to environmental sustainability by increasing resource and information efficiency as a result of applying Industry 4.0 technologies throughout the product lifecycle; (2) the negative environmental burden of digitalization is primarily due to increased resource and energy use, as well as waste and emissions from manufacturing, use, and disposal of the hardware (the technology lifecycle). Based on these findings, a lifecycle perspective is proposed, considering the environmental impacts from both the product and technology lifecycles. This study identified key implications of digitalization on environmental sustainability in manufacturing to increase awareness of both the positive and negative impacts of digitalization and thereby support decision making to invest in new digital technologies.

scholarly journals Environmental impacts for polyurethane panels

2019 ◽  
Vol 111 ◽  
pp. 03063
Author(s):  
Erika Guolo ◽  
Francesca Cappelletti ◽  
Piercarlo Romagnoni ◽  
Fabio Raggiotto
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impacts ◽  
Thermal Insulation ◽  
Environmental Sustainability ◽  
Energy Savings ◽  
Cell Structure ◽  
Product Category ◽  
Environment Impact ◽  
Support Tool

According to the European targets for 2030, for managing a policy of improving the environmental sustainability of buildings it is essential to assess the buildings and building components impacts both in the construction and in the utilization phases. The use of building is essential on the environmental impacts (equal to about 90%) as consequence the commitment must be aimed at reducing energy consumption and CO2 emissions of buildings during their lifetime, through correct design and proper selection of materials and technologies; above all, the use of thermal insulation materials is fundamental. A useful support tool for manufacturers and designers for the eco-design innovation of products and production processes is the LCA - Life Cycle Assessment: the assessment allows to identify and to quantify energy, consumed materials and residues released as environment impact during the processes. Comparison of the environmental impact data of the different products it is possible by adopting the EPD - Environmental Product Declarations approach, which envisages, for each group of products, the elaboration of a specific technique, the PRC - Product Category Rules. In the building sector, among the thermal insulating materials currently in use, the rigid expanded polyurethane (thermoset polymeric insulation products with a substantially closed cell structure including both polymer types based on PIR and PUR), allows to obtain excellent characteristics of very low density masses, resulting in a reduction in energy consumption deriving from transport, installation and disposal or recycling at the end of life. Numerous studies on environmental impacts during the polyurethane life cycle have shown that the amount of resources consumed for the production of polyurethane foam is amortized in the use phase of buildings thanks to the energy savings determined by thermal insulation. Very important features of polyurethane is the high durability in time (higher or equal to the life of the building). This is demonstrated following some tests of physical characterization and verification of durability of rigid polyurethane insulation panels used in different types of building and construction, without maintenance: according to the determination of thermal conductivity and of the compressive strength is proven as the values are unchanged despite the years of use (over 40 years). The paper presents the LCA evaluation of a polyurethane panel; the durability of thermal properties has been verified by experimental tests.

Vignettes

2018 ◽  
Author(s):  
Marc J. Stern
Keyword(s):  
Real World ◽  
Environmental Sustainability ◽  
National Park ◽  
Public Involvement ◽  
Energy Savings ◽  
Rapid Development ◽  
Environmental Problems ◽  
Persuasive Communications ◽  
For Profit ◽  
The Face

Chapter 9 contains five vignettes, each based on real world cases. In each, a character is faced with a problem and uses multiple theories within the book to help him or her develop and execute a plan of action. The vignettes provide concrete examples of how to apply the theories in the book to solving environmental problems and working toward environmental sustainability in a variety of contexts, including managing visitors in a national park, developing persuasive communications, designing more collaborative public involvement processes, starting up an energy savings program within a for-profit corporation, and promoting conservation in the face of rapid development.

scholarly journals Energy and Greenhouse Gas Savings for LEED-Certified U.S. Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 749
Author(s):  
John H. Scofield ◽  
Susannah Brodnitz ◽  
Jakob Cornell ◽  
Tian Liang ◽  
Thomas Scofield
Keyword(s):  
Greenhouse Gas ◽  
Energy Use ◽  
Energy Savings ◽  
Electric Energy ◽  
Building Energy ◽  
Energy Performance ◽  
Office Buildings ◽  
Ghg Emission ◽  
Site Energy ◽  
New Construction

In this work, we present results from the largest study of measured, whole-building energy performance for commercial LEED-certified buildings, using 2016 energy use data that were obtained for 4417 commercial office buildings (114 million m2) from municipal energy benchmarking disclosures for 10 major U.S. cities. The properties included 551 buildings (31 million m2) that we identified as LEED-certified. Annual energy use and greenhouse gas (GHG) emission were compared between LEED and non-LEED offices on a city-by-city basis and in aggregate. In aggregate, LEED offices demonstrated 11% site energy savings but only 7% savings in source energy and GHG emission. LEED offices saved 26% in non-electric energy but demonstrated no significant savings in electric energy. LEED savings in GHG and source energy increased to 10% when compared with newer, non-LEED offices. We also compared the measured energy savings for individual buildings with their projected savings, as determined by LEED points awarded for energy optimization. This analysis uncovered minimal correlation, i.e., an R2 < 1% for New Construction (NC) and Core and Shell (CS), and 8% for Existing Euildings (EB). The total measured site energy savings for LEED-NC and LEED-CS was 11% lower than projected while the total measured source energy savings for LEED-EB was 81% lower than projected. Only LEED offices certified at the gold level demonstrated statistically significant savings in source energy and greenhouse gas emissions as compared with non-LEED offices.

scholarly journals Impacts on Indoor Thermal Comfort and Heating Energy Use in Hellenic Dwellings from Occupant Behavioral Reactions

2021 ◽  
Vol 11 (14) ◽  
pp. 6254
Author(s):  
Elena G. Dascalaki ◽  
Constantinos A. Balaras
Keyword(s):  
Thermal Comfort ◽  
Energy Use ◽  
Energy Savings ◽  
Local Heating ◽  
Economic Recession ◽  
Heating System ◽  
Building Stock ◽  
Heating Systems ◽  
Indoor Thermal Comfort ◽  
Energy Audits

In an effort to reduce the operational cost of their dwellings, occupants may even have to sacrifice their indoor thermal comfort conditions. Following the economic recession in Greece over recent years, homeowners have been forced to adapt their practices by shortening heating hours, lowering the indoor thermostat settings, isolating spaces that are not heated or even turning off their central heating system and using alternative local heating systems. This paper presents the results from over 100 occupant surveys using questionnaires and walk-through energy audits in Hellenic households that documented how occupants operated the heating systems in their dwellings and the resulting indoor thermal comfort conditions and actual energy use. The results indicate that the perceived winter thermal comfort conditions were satisfactory in only half of the dwellings, since the actual operating space heating periods averaged only 5 h (compared with the assumed 18 h in standard conditions), while less than half heated their entire dwellings and only a fifth maintained an indoor setpoint temperature of 20 °C, corresponding to standard comfort conditions. Mainstream energy conservation measures include system maintenance, switching to more efficient systems, reducing heat losses and installing controls. This information is then used to derive empirical adaptation factors for bridging the gap between the calculated and actual energy use, making more realistic estimates of the expected energy savings following building renovations, setting prudent targets for energy efficiency and developing effective plans toward a decarbonized building stock.

scholarly journals Introducing a Degrowth Approach to the Circular Economy Policies of Food Production, and Food Loss and Waste Management: Towards a Circular Bioeconomy

2021 ◽  
Vol 13 (6) ◽  
pp. 3379 ◽  
Author(s):  
Daniel Hoehn ◽  
Jara Laso ◽  
María Margallo ◽  
Israel Ruiz-Salmón ◽  
Francisco José Amo-Setién ◽  
...  
Keyword(s):  
Waste Management ◽  
Environmental Impacts ◽  
Environmental Sustainability ◽  
Circular Economy ◽  
Food Production ◽  
The Sustainable Development ◽  
Food Loss ◽  
Use Of Resources ◽  
Assessment Approach ◽  
New Policies

There is a growing debate surrounding the contradiction between an unremitting increase in the use of resources and the search for environmental sustainability. Therefore, the concept of sustainable degrowth is emerging aiming to introduce in our societies new social values and new policies, capable of satisfying human requirements whilst reducing environmental impacts and consumption of resources. In this framework, circular economy strategies for food production and food loss and waste management systems, following the Sustainable Development Goals agenda, are being developed based on a search for circularity, but without setting limits to the continual increase in environmental impacts and resource use. This work presents a methodology for determining the percentage of degrowth needed in any food supply chain, by analyzing four scenarios in a life cycle assessment approach over time between 2020 and 2040. Results for the Spanish case study suggested a degrowth need of 26.8% in 2015 and 58.9% in 2040 in order to achieve compliance with the Paris Agreement targets, highlighting the reduction of meat and fish and seafood consumption as the most useful path.

scholarly journals Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3876
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Aiman Albatayneh ◽  
Patrick Dutournie ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Models ◽  
Water Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Cooling Loads

Since buildings are one of the major contributors to global warming, efforts should be intensified to make them more energy-efficient, particularly existing buildings. This research intends to analyze the energy savings from a suggested retrofitting program using energy simulation for typical existing residential buildings. For the assessment of the energy retrofitting program using computer simulation, the most commonly utilized residential building types were selected. The energy consumption of those selected residential buildings was assessed, and a baseline for evaluating energy retrofitting was established. Three levels of retrofitting programs were implemented. These levels were ordered by cost, with the first level being the least costly and the third level is the most expensive. The simulation models were created for two different types of buildings in three different climatic zones in Palestine. The findings suggest that water heating, space heating, space cooling, and electric lighting are the highest energy consumers in ordinary houses. Level one measures resulted in a 19–24 percent decrease in energy consumption due to reduced heating and cooling loads. The use of a combination of levels one and two resulted in a decrease of energy consumption for heating, cooling, and lighting by 50–57%. The use of the three levels resulted in a decrease of 71–80% in total energy usage for heating, cooling, lighting, water heating, and air conditioning.

Sign in / Sign up

Export Citation Format

Share Document