Development and Experimental Performance Verification of a Magneto-Aerostatic Bearing for Cartridge of Dental Handpieces

2012 ◽  
Author(s):  
Guan-Chung Ting ◽  
Kuang-Yuh Huang ◽  
Keng-Ning Chang
Keyword(s):  
High Speed ◽  
Ball Bearings ◽  
Aerostatic Bearing ◽  
Operation Conditions ◽  
Air Inlet ◽  
Efficient Performance ◽  
Aerostatic Bearings ◽  
Repulsive Forces ◽  
Radial Loading ◽  
Air Film

Bearings for high-speed rotors are the key component of dental handpieces. The friction induced by conventional ball bearings restricts its speed and reduces its efficiency. In order to significantly improve the efficiency of dental handpieces, a mini-type cartridge that integrates a turbine and a spindle with radial aerostatic bearings and axial passive magnetic bearings has been ingeniously designed and realized. Around the rotating spindle, there is a high-pressured air film built up by a pair of radial aerostatic bearings, and magnet rings are applied to create repulsive forces to axially support the rotating spindle. The high-pressured air film comes from the specifically designed separable orifice restrictors, which can be easily and precisely manufactured. Frictionless bearing effect can be achieved by aerostatic principle, and the magnetic principle is applied to create large repulsive force against the axial working force. A tri-directional air inlet is designed to reduce radial loading force of a spindle during working. The modularized form of the magneto-aerostatic bearing allows it to be easily assembled and replaced in the very compact space of a mini-type cartridge. Through analytical simulations with fluid-dynamics software (CFD) and experiments, the magneto-aerostatic bearing is optimized to bring out efficient performance in its limited space. The experiments have verified that its noise level is 15dB lower than the conventional cartridge with ball bearings, and its startup air pressure is reduced from 0.4 bar to 0.1 bar. Under the same operation conditions, the newly developed cartridge with magneto-aerostatic bearings creates twice higher speed than that of the conventional one.

scholarly journals Mathematical Modeling on Statics and Dynamics of Aerostatic Thrust Bearing with External Combined Throttling and Elastic Orifice Fluid Flow Regulation

Lubricants ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 57 ◽  
Author(s):  
Vladimir Kodnyanko ◽  
Stanislav Shatokhin ◽  
Andrey Kurzakov ◽  
Yuri Pikalov
Keyword(s):  
Mathematical Modeling ◽  
High Speed ◽  
Metal Cutting ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Performance Criteria ◽  
Design Parameters ◽  
Machining Accuracy ◽  
Aerostatic Bearing ◽  
Aerostatic Bearings

As aerostatic bearings are used in high-speed metal-cutting machines to increase machining accuracy, there is the need to improve their characteristics, including compliance, which is usually high. In practical applications, a significant reduction of bearing compliance is often necessary, sometimes down to zero and even negative values, to ensure automatic compensation of the elastic deformation in the machine technological system. A decrease in compliance leads to deterioration in the dynamic performance of the bearing, so it is necessary to develop new designs that meet the above requirements. This article considers an aerostatic bearing, in which decrease in compliance is ensured by the use of air throttling with elastic orifices. To ensure its stability, the principle of combined external throttling was applied, which can substantially improve the dynamics of conventional aerostatic bearings. A mathematical model of the elastic orifice deformation was developed, together with the flow rate performance calculation method. The method ensured full qualitative and satisfactory quantitative agreement with the experimental data. The model was used in the mathematical modeling of the aerostatic bearing movement. The article also proposes a method to calculate the static load capacity and compliance of a bearing, as well as a numerical method for fast computation of its dynamic performance, which allows for real-time multi-parameter optimization by the bearing dynamic performance criteria. The study showed that there is an optimal set of design parameters for which low, zero, and negative static compliance of the bearing is ensured, with the necessary stability margin, high speed, and the non-oscillatory nature of the transient processes.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Dynamic Quality of an Aerostatic Thrust Bearing with a Microgroove and Support Center on Elastic Suspension

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1492
Author(s):  
Vladimir Kodnyanko ◽  
Stanislav Shatokhin ◽  
Andrey Kurzakov ◽  
Lilia Strok ◽  
Yuri Pikalov ◽  
...  
Keyword(s):  
Dynamic Characteristics ◽  
Negative Impact ◽  
Aerostatic Bearing ◽  
Elastic Suspension ◽  
Variable Parameters ◽  
Aerostatic Bearings ◽  
Improved Design ◽  
Dynamic Quality ◽  
Bearing Layer

The disadvantage of aerostatic bearings is their low dynamic quality. The negative impact on the dynamic characteristics of the bearing is exerted by the volume of air contained in the bearing gap, pockets, and microgrooves located at the outlet of the feeding diaphragms. Reducing the volume of air in the flow path is a resource for increasing the dynamic quality of the aerostatic bearing. This article presents an improved design of an axial aerostatic bearing with simple diaphragms, an annular microgroove, and an elastic suspension of the movable center of the supporting disk. A mathematical model is presented and a methodology for calculating the static characteristics of a bearing and dynamic quality indicators is described. The calculations were carried out using dimensionless quantities, which made it possible to reduce the number of variable parameters. A new method for solving linearized and Laplace-transformed boundary value problems for transformants of air pressure dynamic functions in the bearing layer was applied, which made it possible to obtain a numerical solution of problems sufficient for practice accuracy. The optimization of the criteria for the dynamic quality of the bearing was carried out. It is shown that the use of an elastic suspension of the support center improves its dynamic characteristics by reducing the volume of compressed air in the bearing layer and choosing the optimal volume of the microgroove.

Comparative study on the use of acoustic emission and vibration analyses for the bearing fault diagnosis of high-speed trains

2021 ◽  
pp. 147592172110360
Author(s):  
Dongming Hou ◽  
Hongyuan Qi ◽  
Honglin Luo ◽  
Cuiping Wang ◽  
Jiangtian Yang
Keyword(s):  
Acoustic Emission ◽  
Fault Diagnosis ◽  
High Speed ◽  
High Speed Train ◽  
Signal Attenuation ◽  
Transmission Path ◽  
Bearing Fault Diagnosis ◽  
Operation Conditions ◽  
Fault Features ◽  
High Speed Trains

A wheel set bearing is an important supporting component of a high-speed train. Its quality and performance directly determine the overall safety of the train. Therefore, monitoring a wheel set bearing’s conditions for an early fault diagnosis is vital to ensure the safe operation of high-speed trains. However, the collected signals are often contaminated by environmental noise, transmission path, and signal attenuation because of the complexity of high-speed train systems and poor operation conditions, making it difficult to extract the early fault features of the wheel set bearing accurately. Vibration monitoring is most widely used for bearing fault diagnosis, with the acoustic emission (AE) technology emerging as a powerful tool. This article reports a comparison between vibration and AE technology in terms of their applicability for diagnosing naturally degraded wheel set bearings. In addition, a novel fault diagnosis method based on the optimized maximum second-order cyclostationarity blind deconvolution (CYCBD) and chirp Z-transform (CZT) is proposed to diagnose early composite fault defects in a wheel set bearing. The optimization CYCBD is adopted to enhance the fault-induced impact response and eliminate the interference of environmental noise, transmission path, and signal attenuation. CZT is used to improve the frequency resolution and match the fault features accurately under a limited data length condition. Moreover, the efficiency of the proposed method is verified by the simulated bearing signal and the real datasets. The results show that the proposed method is effective in the detection of wheel set bearing faults compared with the minimum entropy deconvolution (MED) and maximum correlated kurtosis deconvolution (MCKD) methods. This research is also the first to compare the effectiveness of applying AE and vibration technologies to diagnose a naturally degraded high-speed train bearing, particularly close to actual line operation conditions.

Rough Air-Soft Elastohydrodynamic Lubrication

2013 ◽  
Vol 420 ◽  
pp. 30-35
Author(s):  
Khanittha Wongseedakaew ◽  
Jesda Panichakorn
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Modulus Of Elasticity ◽  
Contact Region ◽  
Elastohydrodynamic Lubrication ◽  
Multilevel Methods ◽  
Inlet Temperature ◽  
Film Pressure ◽  
Air Inlet ◽  
Air Film

This paper presents the effects of rough surface air-soft elastohydrodynamic lubrication (EHL) of rollers for soft material under the effect of air molecular slip. The time independent modified Reynolds equation and elasticity equation were solved numerically using finite different method, Newton-Raphson method and multigrid multilevel methods were used to obtain the film pressure profiles and film thickness in the contact region. The effects of amplitude of surface roughness, modulus of elasticity and air inlet temperature are examined. The simulation results showed surface roughness has effect on film thickness but it little effect to air film pressure. When the amplitude of surface roughness and modulus of elasticity increased, the air film thickness decreased but air film pressure increased. However, the air inlet temperature increased when the air film thickness increased.

scholarly journals Analysis of the dynamic characteristics of downsized aerostatic thrust bearings with different pressure equalizing grooves at high or ultra-high speed

2021 ◽  
Vol 13 (5) ◽  
pp. 168781402110180
Author(s):  
Ruzhong Yan ◽  
Haojie Zhang
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Rotation Speed ◽  
Dynamic Stiffness ◽  
Simulation Method ◽  
Perturbation Amplitude ◽  
Thrust Bearings ◽  
Supply Pressure ◽  
Ultra High Speed ◽  
Air Film

This study adopts the DMT(dynamic mesh technology) and UDF(user defined functions) co-simulation method to study the dynamic characteristics of aerostatic thrust bearings with equalizing grooves and compare with the bearing without equalizing groove under high speed or ultra high speed for the first time. The effects of air film thicness, supply pressure, rotation speed, perturbation amplitude, perturbation frequency, and cross section of the groove on performance characteristics of aerostatic thrust bearing are thoroughly investigated. The results show that the dynamic stiffiness and damping coefficient of the bearing with triangular or trapezoidal groove have obvious advantages by comparing with that of the bearing without groove or with rectangular groove for the most range of air film thickness, supply pressure, rotation speed, perturbation amplitude, especially in the case of high frequency, which may be due to the superposition of secondary throttling effect and air compressible effect. While the growth range of dynamic stiffness decreases in the case of high or ultra-high rotation speed, which may be because the Bernoulli effect started to appear. The perturbation amplitude only has little influence on the dynamic characteristic when it is small, but with the increase of perturbation amplitude, the influence becomes more obvious and complex, especially for downsized aerostatic bearing.

An improved model on forecasting temperature rise of high-speed angular contact ball bearings considering structural constraints

2018 ◽  
Vol 70 (1) ◽  
pp. 15-22 ◽  
Author(s):  
De-xing Zheng ◽  
Weifang Chen ◽  
Miaomiao Li
Keyword(s):  
Heat Generation ◽  
Temperature Rise ◽  
High Speed ◽  
Structural Constraints ◽  
Ball Bearings ◽  
Content Type ◽  
Grid Model ◽  
Simulation Results ◽  
Operation Parameters ◽  
Improved Model

Purpose Thermal performances are key factors impacting the operation of angular contact ball bearings. Heat generation and transfer about angular contact ball bearings, however, have not been addressed thoroughly. So far, most researchers only considered the convection effect between bearing housings and air, whereas the cooling/lubrication operation parameters and configuration effect were not taken into account when analyzing the thermal behaviors of bearings. This paper aims to analyze the structural constraints of high-speed spindle, structural features of bearing, heat conduction and convection to study the heat generation and transfer of high-speed angular contact ball bearings. Design/methodology/approach Based on the generalized Ohm’s law, the thermal grid model of angular contact ball bearing of high-speed spindle was first established. Next Gauss–Seidel method was used to solve the equations group by Matlab, and the nodes temperature was calculated. Finally, the bearing temperature rise was tested, and the comparative analysis was made with the simulation results. Findings The results indicate that the simulation results of bearing temperature rise for the proposed model are in better agreement with the test values. So, the thermal grid model established is verified. Originality/value This paper shows an improved model on forecasting temperature rise of high-speed angular contact ball bearings. In modeling, the cooling/lubrication operation parameters and structural constraints are integrated. As a result, the bearing temperature variation can be forecasted more accurately, which may be beneficial to improve bearing operating accuracy and bearing service life.

Prediction of Ball Motion in High-Speed Thrust-Loaded Ball Bearings

1976 ◽  
Vol 98 (3) ◽  
pp. 463-469 ◽  
Author(s):  
C. R. Gentle ◽  
R. J. Boness
Keyword(s):  
Computer Program ◽  
High Speed ◽  
Ball Bearing ◽  
Viscoelastic Behavior ◽  
Specific Situation ◽  
Fluid Models ◽  
Ball Bearings ◽  
Theoretical Predictions ◽  
Ball Motion

This paper describes the development of a computer program used to analyze completely the motion of a ball in a high-speed, thrust-loaded ball bearing. Particular emphasis is paid to the role of the lubricant in governing the forces and moments acting on each ball. Expressions for these forces due to the rolling and sliding of the ball are derived in the light of the latest fluid models, and estimates are also made of the cage forces applicable in this specific situation. It is found that only when lubricant viscoelastic behavior is considered do the theoretical predictions agree with existing experimental evidence.

On the dynamic stability of high-speed gas bearings: stability study and experimental validation

2011 ◽  
Vol 2 (2) ◽  
pp. 342-351
Author(s):  
T. Waumans ◽  
J. Peirs ◽  
J. Reynaerts ◽  
F. Al-Bender
Keyword(s):  
Dynamic Stability ◽  
Stability Problem ◽  
High Speed ◽  
Experimental Validation ◽  
Stability Study ◽  
Gas Bearings ◽  
Aerostatic Bearings ◽  
Bearing Dynamics ◽  
Wide Operating ◽  
Operating Temperature Range

For high-speed applications, gas lubricated bearings offer very specific advantages over other,more conventional bearing technologies: a clean and oil-free solution, virtually wear-free operation, lowfrictional losses, wide operating temperature range, etc. However, the principal drawback involved in theapplication of high-speed gas bearings concerns the dynamic stability problem. Successful applicationtherefore requires control of the rotor-bearing dynamics so as to avoid instabilities.After a detailed study of the dynamic stability problem and the formulation of a convenient stability criterium,a brief overview is given of the currently existing bearing types and configurations for improving the stability.In addition, three strategies are introduced: (i) optimal design of plain aerostatic bearings; (ii) modification ofthe bearing geometry to counteract the destabilising effects in the gas film; and (iii) introduction of dampingexternal to the gas film as to compensate for the destabilising effects.These strategies are worked out into detail leading to the formulation of a series of design rules. Theireffectiveness is validated experimentally at a miniature scale. In recent experiments a rotational speed of1.2 million rpm has been achieved with a 6 mm rotor on aerodynamic journal bearings, leading to a recordDN-number of 7.2 million.

Theoretische Analyse eines neuen Loslagerkonzepts*/Theoretical analysis of a new floating bearing - The simulated operational behavior of FRB bearings in comparison to reference bearings

2015 ◽  
Vol 105 (05) ◽  
pp. 285-290
Author(s):  
C. Brecher ◽  
M. Fey ◽  
J. Falker
Keyword(s):  
Experimental Investigation ◽  
Theoretical Analysis ◽  
High Speed ◽  
Contact Point ◽  
Ball Bearings ◽  
Roller Bearings ◽  
Cylindrical Roller ◽  
Bearing System

Das Floating-Roller-Ball (FRB)-Lager ist ein Konzept für Radiallager als Loslager für Hochgeschwindigkeits-Motorspindeln, das die Vorteile von Zylinderrollenlagern und angestellten Mehrpunktlagern in einer neuen Wälzkörpergeometrie kombiniert. Zur Auslegung des ersten Prototyps wurde mithilfe eines Berechnungstools das theoretische Betriebsverhalten untersucht. Die Berechnungsergebnisse liefern Randbedingungen als Grundlage zur experimentellen Untersuchung des Lagerkonzepts.   Floating roller ball bearings provide a new floating bearing system for high-speed motor spindles, combining the advantages of both cylindrical roller bearings and elastically mounted multi-contact point bearings in a new roller geometry. To design the first prototype, the operational behavior of the bearing system was analyzed theoretically by a new calculation tool. The results provide the basis for the experimental investigation of the bearing concept.

Sign in / Sign up

Export Citation Format

Share Document