Design and Development of a Small Scale Ocean Current and Wave Energy Converter

2016 ◽  
Author(s):  
Tyler Johnson ◽  
Benjamin Phillips ◽  
Scott Ringuette ◽  
Mansour Zenouzi ◽  
James McCusker
Keyword(s):  
Wave Energy ◽  
Alternative Energy ◽  
Current Flow ◽  
Inertial Mass ◽  
Wave Energy Converter ◽  
Ocean Current ◽  
Energy Sources ◽  
Small Scale ◽  
Energy Converter ◽  
Mass System

The inability to tie into the electrical power grid drives mariners to search for alternative energy sources. One such alternative energy source is to harness the vast supply of kinetic and potential energies associated with ocean currents and waves. In the Ocean Current and Wave Energy Converter, a tandem system of an underwater turbine and a wave energy buoy is designed to provide power to a standard 12 volt marine battery. Subsurface energy in the form of current flow is harvested by a helical cross-flow Gorlov turbine. Kinetic surface wave energy is harnessed through an inertial mass system. This system utilizes a 360°, bidirectional, rotating mass enclosed in a spherical buoy that converts the pitching motion into rotational motion. Both subsystems are integrated together through the charging circuit. The charging system is designed to integrate multiple energy sources to maximize the total energy harnessed. Through testing and analysis, design improvements are identified and it is determined that the design of a small scale current flow and wave energy conversion system is a feasible solution to providing power from the ocean.

scholarly journals A broadbanded pressure differential wave energy converter based on dielectric elastomer generators

2021 ◽  
Author(s):  
Michele Righi ◽  
Giacomo Moretti ◽  
David Forehand ◽  
Lorenzo Agostini ◽  
Rocco Vertechy ◽  
...  
Keyword(s):  
Wave Energy ◽  
Large Deformations ◽  
Dielectric Elastomer ◽  
Wave Energy Converter ◽  
Pressure Differential ◽  
Design Stage ◽  
Small Scale ◽  
Energy Converter ◽  
Wide Range ◽  
The Waves

AbstractDielectric elastomer generators (DEGs) are a promising option for the implementation of affordable and reliable sea wave energy converters (WECs), as they show considerable promise in replacing expensive and inefficient power take-off systems with cheap direct-drive generators. This paper introduces a concept of a pressure differential wave energy converter, equipped with a DEG power take-off operating in direct contact with sea water. The device consists of a closed submerged air chamber, with a fluid-directing duct and a deformable DEG power take-off mounted on its top surface. The DEG is cyclically deformed by wave-induced pressure, thus acting both as the power take-off and as a deformable interface with the waves. This layout allows the partial balancing of the stiffness due to the DEG’s elasticity with the negative hydrostatic stiffness contribution associated with the displacement of the water column on top of the DEG. This feature makes it possible to design devices in which the DEG exhibits large deformations over a wide range of excitation frequencies, potentially achieving large power capture in a wide range of sea states. We propose a modelling approach for the system that relies on potential-flow theory and electroelasticity theory. This model makes it possible to predict the system dynamic response in different operational conditions and it is computationally efficient to perform iterative and repeated simulations, which are required at the design stage of a new WEC. We performed tests on a small-scale prototype in a wave tank with the aim of investigating the fluid–structure interaction between the DEG membrane and the waves in dynamical conditions and validating the numerical model. The experimental results proved that the device exhibits large deformations of the DEG power take-off over a broad range of monochromatic and panchromatic sea states. The proposed model demonstrates good agreement with the experimental data, hence proving its suitability and effectiveness as a design and prediction tool.

Numerical Verification of the Tuned Inertial Mass Effect of a Wave Energy Converter

2017 ◽  
Author(s):  
Ruriko Haraguchi ◽  
Takehiko Asai
Keyword(s):  
Wave Energy ◽  
Inertial Mass ◽  
Mass Effect ◽  
Dominant Frequency ◽  
Wave Energy Converter ◽  
Numerical Verification ◽  
Energy Converter ◽  
Numerical Studies ◽  
In Series ◽  
Band Limited

This paper introduces the mechanism of a buoy-type wave energy converter (WEC) with a tuned inertial mass (TIM) mechanism. The TIM mechanism consists of a rotational mass and motor connected in series with a tuning spring. While it is common to control the current of the power take-off system, the stiffness of the spring is tuned in addition so that the inertial mass part resonates with the dominant frequency of the wave motion. The method to design the parameters to maximize the power generation capability is introduced and numerical studies for both narrowband and broadband sea states are carried out. It is shown that the proposed device demonstrates better energy harvesting performance compared to the WEC without the TIM mechanism to band-limited stationary random vibration.

scholarly journals Sea Wave Energy. A Review of the Current Technologies and Perspectives

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6604
Author(s):  
Domenico Curto ◽  
Vincenzo Franzitta ◽  
Andrea Guercio
Keyword(s):  
Wave Energy ◽  
Power Plants ◽  
New Technologies ◽  
Morphological Characteristics ◽  
Electrical Energy ◽  
Wave Energy Converter ◽  
Tidal Range ◽  
Ocean Current ◽  
Energy Converter ◽  
Ocean Thermal Energy

The proposal of new technologies capable of producing electrical energy from renewable sources has driven research into seas and oceans. Research finds this field very promising in the future of renewable energies, especially in areas where there are specific climatic and morphological characteristics to exploit large amounts of energy from the sea. In general, this kind of energy is referred to as six energy resources: waves, tidal range, tidal current, ocean current, ocean thermal energy conversion, and saline gradient. This review has the aim to list several wave-energy converter power plants and to analyze their years of operation. In this way, a focus is created to understand how many wave-energy converter plants work on average and whether it is indeed an established technology.

scholarly journals Experimental Analysis of a Novel Adaptively Counter-Rotating Wave Energy Converter for Powering Drifters

2019 ◽  
Vol 7 (6) ◽  
pp. 171 ◽  
Author(s):  
Guoheng Wu ◽  
Zhongyue Lu ◽  
Zirong Luo ◽  
Jianzhong Shang ◽  
Chongfei Sun ◽  
...  
Keyword(s):  
Wave Energy ◽  
Wave Energy Converter ◽  
Irregular Waves ◽  
Surface Velocity ◽  
Small Scale ◽  
Power Constraint ◽  
Energy Converter ◽  
Wave Tank ◽  
Wide Range ◽  
Rotating Wave

Nowadays, drifters are used for a wide range of applications for researching and exploring the sea. However, the power constraint makes it difficult for their sampling intervals to be smaller, meaning that drifters cannot transmit more accurate measurement data to satellites. Furthermore, due to the power constraint, a modern Surface Velocity Program (SVP) drifter lives an average of 400 days before ceasing transmission. To overcome the power constraint of SVP drifters, this article proposes an adaptively counter-rotating wave energy converter (ACWEC) to supply power for drifters. The ACWEC has the advantages of convenient modular integration, simple conversion process, and minimal affection by the crucial sea environment. This article details the design concept and working principle, and the interaction between the wave energy converter (WEC) and wave is presented based on plane wave theory. To verify the feasibility of the WEC, the research team carried out a series of experiments in a wave tank with regular and irregular waves. Through experiments, it was found that the power and efficiency of the ACWEC are greatly influenced by parameters such as wave height and wave frequency. The maximum output power of the small scale WEC in a wave tank is 6.36 W, which allows drifters to detect ocean data more frequently and continuously.

A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter (WRASPA)

2009 ◽  
Author(s):  
Majid A. Bhinder ◽  
Clive G. Mingham ◽  
Derek M. Causon ◽  
Mohammad T. Rahmati ◽  
George A. Aggidis ◽  
...  
Keyword(s):  
Wave Energy ◽  
Informed Choice ◽  
Wave Energy Converter ◽  
Body Motion ◽  
Numerical Dissipation ◽  
Small Scale ◽  
Linear Wave ◽  
Energy Converter ◽  
Non Linear ◽  
Experimental Project

This paper presents the findings from using several commercial computational fluid dynamics codes in a joint numerical and experimental project to simulate WRASPA, a new wave energy converter (WEC) device. A series of fully 3D non-linear simulations of WRASPA are presented. Three commercial codes STAR-CCM, CFX and FLOW-3D are considered for simulating the WRASPA device and final results are presented based on the use of Flow-3D. Results are validated by comparison to experimental data obtained from small scale tank tests undertaken at Lancaster University (LU). The primary aim of the project is to use numerical simulation to optimize the collector geometry for power production over a range of likely wave climates. A secondary aim is to evaluate the ability of commercial codes to simulate rigid body motion in linear and non-linear wave climates in order to choose the optimal code with respect to compute speed and ease of problem setup. Issues relating to the ability of a code in terms of numerical dissipation of waves, wave absorption, wave breaking, grid generation and moving bodies will all be discussed. The findings of this paper serve as a basis for an informed choice of commercial package for such simulations. However the capability of these commercial codes is increasing with every new release.

Design and Potential Application of Small Scale Wave Energy Converter

2017 ◽  
Author(s):  
Tunde O. Aderinto ◽  
Francisco Haces-Fernandez ◽  
Hua Li
Keyword(s):  
Wave Energy ◽  
Energy Production ◽  
Energy Resource ◽  
Appropriate Technology ◽  
Wave Energy Converter ◽  
Small Scale ◽  
Ocean Energy ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Wave Properties

Although theoretical available wave energy is higher than most of ocean energy sources, the commercial utilization of wave energy is much slower than other ocean energy sources. The difficulty of integration with the electrical grid system and the challenges of the installation, operation and maintenance of large energy generation and transmission systems are the major reasons. Even though there are successfully tested models of wave energy converters, the fact that wave energy is directly affected by wave height and wave period makes the actual wave energy output with high variation and difficult to be predicted. And most of the previous studies on wave energy and its utilization have focused on the large scale energy production that can be integrated into a power grid system. In this paper, the authors identify and discuss stand-alone wave energy converter systems and facilities that are not connected to the electricity grid with focus on small scale wave energy systems as potential source of energy. For the proper identification, qualification and quantification of wave energy resource potential, wave properties such as wave height and period need to be characterized. This is used to properly determine and predict the probability of the occurrence of these wave properties at particular locations, which enables the choice of product design, installation, operation and maintenance to effectively capture wave energy. Meanwhile, the present technologies available for wave energy converters can be limited by location (offshore, nearshore or shoreline). Therefore, the potential applications of small scale stand-alone wave energy converter are influenced by the demand, location of the need and the appropriate technology to meet the identified needs. The paper discusses the identification of wave energy resource potentials, the location and appropriate technology suitable for small scale wave energy converter. Two simplified wave energy converter designs are created and simulated under real wave condition in order to estimate the energy production of each design.

scholarly journals Influence of a Taut Cable on the Performance of a Point-Absorber Wave Energy Converter

2018 ◽  
Author(s):  
R. Wang ◽  
Y. Wei ◽  
M. van Rooij ◽  
B. Jayawardhana ◽  
A. I. Vakis
Keyword(s):  
Frequency Domain ◽  
Wave Energy ◽  
Alternative Energy ◽  
Frequency Domain Analysis ◽  
Wave Energy Converter ◽  
Domain Model ◽  
Energy Harvest ◽  
Energy Converter ◽  
Point Absorber ◽  
Improved Model

In recent years, wave energy converters (WECs) have received considerable attention as an efficient way to harvest alternative energy sources. Within this class of systems, point-absorbers are popular and have become one of the most widely used renewable energy harvest designs all over the world, at least in the preliminary R&D stage, with many relevant research works having been published as well. However, unlike the single buoy and PTO systems which already have a comprehensive research basis, the connection cable has received little attention. The traditional taut cable analysis approach, initiated from the needs of the oil&gas industry, has been applied for WEC investigations. However, this approach utilizes an essential assumption that the oscillating term (PTO force) is much smaller than the static term of the cable force (pre-tension) and could be neglected, which may not be proper for WEC applications. In this work, a conventional frequency domain model is utilized to test and verify the validity of the previously mentioned assumption by presenting the ratio between two force terms. Then the ratio could be applied in combination with sea state contours to reveal the critical state of the cable. Then, a fully nonlinear time domain method of a numerical solution of the point-absorber wave energy converter is presented. According to the critical states obtained from the frequency domain analysis, an improved model of a slack cable is proposed. Its influence on the energy extraction performance is investigated using the open source code — WEC-Sim. This work provides insight into simulating a proper model of the cable and how the design of the cable influences the WEC performance.

scholarly journals Using Flexible Blades to Improve the Performance of Novel Small-Scale Counter-Rotating Self-Adaptable Wave Energy Converter for Unmanned Marine Equipment

2019 ◽  
Vol 7 (7) ◽  
pp. 223 ◽  
Author(s):  
Sun ◽  
Shang ◽  
Luo ◽  
Lu ◽  
Wu ◽  
...  
Keyword(s):  
Output Power ◽  
Wave Energy ◽  
Power Supply ◽  
Simulation Analysis ◽  
Average Power ◽  
Wave Energy Converter ◽  
Small Scale ◽  
Energy Converter ◽  
Experimental Conditions ◽  
Blade Thickness

Unmanned marine equipment has been increasingly developed for open seas. The lack of efficient and reliable power supply is currently one of the bottlenecks restricting the practical application of these devices. In order to provide a viable power supply method for unmanned marine equipment, such as sonic buoys and sea robots, we originally propose a novel small-scale flexible blade wave energy converter (WEC) based on self-adaptable counter-rotating operation mechanism. The flexible blade WEC is designed on the basis of the rigid blade WEC with the caging device. This paper identifies the key factors affecting WEC performance through theoretical analysis. According to the numerical simulation analysis, the output mechanical power of the double-layer absorber is 12.8 W, and the hydraulic efficiency is 36.3%. The results of the verification experiment show that the peak power of WEC is 5.8 W and the average power is 3.2 W. The WEC with 65Mn flexible blade under most experimental conditions has the best performance when the blade thickness is 0.10 mm. The study shows that the new generation WEC can effectively overcome the excessive fluctuation of the output power of the previous generation WEC. The output power curve of the novel WEC is relatively smooth, which is conducive to its smooth operation and subsequent utilization and storage of electrical energy.

Comparison of Mooring Loads in Survivability Mode on the Wave Dragon Wave Energy Converter Obtained by a Numerical Model and Experimental Data

2012 ◽  
Author(s):  
Stefano Parmeggiani ◽  
Made Jaya Muliawan ◽  
Zhen Gao ◽  
Torgeir Moan ◽  
Erik Friis-Madsen
Keyword(s):  
Numerical Model ◽  
Wave Energy ◽  
Complex Geometry ◽  
Wave Energy Converter ◽  
Scale Model ◽  
Coupled Analysis ◽  
Small Scale ◽  
Energy Converter ◽  
Numerical Predictions ◽  
Small Scale Model

The Wave Dragon Wave Energy Converter is ready to be up-scaled to commercial size. The design and feasibility analysis of a 1.5 MW pre-commercial unit to be deployed at the DanWEC test center in Hanstholm, Denmark, is currently ongoing. With regard to the mooring system, the design has to be carried out numerically, through coupled analyses of alternative solutions. The present study deals with the preliminary hydrodynamic characterization of Wave Dragon needed in order to calibrate the numerical model to be used for the mooring design. A hydrodynamic analysis of the small scale model in the frequency domain is performed by the software HydroD, which uses WAMIT as core software. The quadratic damping term, accounting for the viscous effect, is determined through an iterative procedure aimed at matching numerical predictions on the mooring tension, derived through time domain coupled analysis, with experimental results derived from tank tests of a small scale model. Due to the complex geometry of the device, a sensitivity analysis is performed to discuss the influence of the mean position on the quality of the numerical predictions. Good correspondence is achieved between the experimental and numerical model. The numerical model is hence considered reliable for future design applications.

scholarly journals Unlimited Energy Source: A Review of Ocean Wave Energy Utilization and Its Impact on the Environment

2021 ◽  
Vol 6 (1) ◽  
pp. 1-16
Author(s):  
Muhammad Satriawan ◽  
L Liliasari ◽  
Wawan Setiawan ◽  
Ade Gafar Abdullah
Keyword(s):  
Wave Energy ◽  
Alternative Energy ◽  
Wave Energy Converter ◽  
Energy Utilization ◽  
Ocean Wave ◽  
Energy Industry ◽  
Energy Converter ◽  
Ocean Wave Energy ◽  
The Government ◽  
The Impact

This paper aims to review the potential of wave energy in several countries, the wave energy converter technology that has been developed, and the impact of the installation of wave energy converter technology devices on the environment. In addition, it discusses the theoretical formulations and challenges in the development of energy converter technology in the future. Based on the detail analysis, the potential of ocean wave energy for alternative energy is very large but cannot be used optimally because the technology of wave energy converter that has been developed is still on a prototype scale. In addition, the impact of the use of ocean wave converters on the environment is insignificant compared with conventional energy. Finally, this study informs and recommends the government and the private sector to start investing in the ocean wave energy industry optimally in order to achieve a sustainable future.

Sign in / Sign up

Export Citation Format

Share Document