Study on the body temperature distribution characteristics of near-space hypersonic vehicles

Author(s):  
Jisong Tan ◽  
Tianyu Chen ◽  
Xiaojing Wang ◽  
Feng Ding ◽  
Zunyang Liu
Author(s):  
P. Hanafizadeh ◽  
B. Sajadi ◽  
M. H. Saidi ◽  
H. Khalkhali ◽  
M. Taherraftar

Automotive industry frequently needs to test new products, according to different production parameters, in order to determine the actual thermal behavior of bodies before mass production is implemented. Numerical simulation of these processes can reduce the very expensive and time consuming experimental procedures. For the drying and hardening process of the top paint applied in the coating process, the body temperature must be raised according to the paint manufacturer regulations. Consequently, prediction of temperature distribution of the car body during various zones of ovens is very vital in the design and performance analysis of the paint dryers. In this research, a novel semi-analytical approach has been used to predict the body temperature variation during the curing process. Considering the energy balance for the body, a set of differential equation has been extracted, depending on the oven zone. These equations can be solved numerically to find the transient temperature profile of the car body. Some parameters in these equations have been achieved by experimental procedure. The results show that the present model predictions are in a good agreement with the experimental data. Therefore, the developed model has a reasonable accuracy and can be used as an efficient robust approach to distinguish overall thermal behavior of the body. These techniques can be used to optimize the design of curing paint oven.


2013 ◽  
Vol 561 ◽  
pp. 542-546
Author(s):  
Zhi Min Fan ◽  
Liang Gao ◽  
Hui Min Li ◽  
Ru Cheng Liu

Solid models of the involute gear, the gear with meshed medium belt and the medium belt were built with the PROE software. Then the steady-sate temperature field of the solid model was analyzed with ANSYS software. The result showed that the body temperature distribution on the tooth face was not effected by the medium belt. Different duty parameters were selected to analyze the highest temperature of the medium belt. So theory basis for choose of the medium belt and the duty parameters was provided.


2020 ◽  
Vol 16 (1) ◽  
pp. 4-12
Author(s):  
Vandana Garg ◽  
Rohit Dutt

Background: Fever, is known as pyrexia, may occur due to infection, inflammation, or any tissue damage and disease states. Normally, the infected or damaged tissue initiates the enhanced formation of pro-inflammatory mediators like cytokines which further increases the synthesis of prostaglandin E2 (PgE2) near the hypothalamic area and thereby trigger the hypothalamus to elevate the body temperature. Objective: Antipyretics are the agents which reduce the elevated body temperature. The most commonly used antipyretic agent, paracetamol, may be fatal due to its side effects. Methods: In this review paper, Chemical Abstracts, Google Scholar, PubMed, and Science Direct were the sources for the published article to collect information regarding antipyretic activity. Results: This review compiles the antipyretic plants that may be useful to treat fever due to various diseases. Conclusion: These medicinal plants could be good alternatives for traditional allopathic antipyretics.


Author(s):  
Dr.Saurabh Parauha ◽  
Hullur M. A. ◽  
Prashanth A. S.

In Ayurveda, Jwara is not merely the concept of raised body temperature, but as is said in Charaka Samhita, 'Deha- Indriya- Manah- Santap' is the cardinal symptoms of Jwara. This can be defined as the state where the body, mind as well as sense oragans suffer due to the high temperature. Vishamajwara is a type of fever, which is described in all Ayurvedic texts. Charaka mentioned Vishamajwara and Chakrapani have commented on Vishamajwara as Bhutanubanda, Susruta affirmed that Aagantuchhanubhandohi praysho Vishamajware. Madhavakara has also recognised Vishamajwara as Bhutabhishangajanya (infected by microorganism). Vishamajwara is irregular (inconsistent) in it's Arambha (nature of onset commitment), Kriya (action production of symptoms) and Kala (time of appearance) and possesses Anushanga (persistence for long periods). The treatment of this disease depends upon Vegavastha and Avegavastha of Jwara. Various Shodhana and Shamana procedures are mentioned in classics to treat Visham Jwara.


1967 ◽  
Vol 45 (3) ◽  
pp. 321-327 ◽  
Author(s):  
David M. Ogilvie

The effects, on the body temperature of white mice, of repeated short exposures to cold were investigated using two methods of restraint. Animals held in a flattened posture became hypothermic at room temperature, cooled more than five times as fast at −10 °C as mice that could adopt a heat-conserving posture, and continued to cool for some time after they were removed from the cold. With repeated tests, cooling at room temperature decreased, and an improvement in re warming ability was observed. In addition, with lightly restrained mice, the fall in rectal temperature during cold exposure showed a progressive decrease, a phenomenon not observed with severely restrained animals.


Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2316
Author(s):  
Daniel Mota-Rojas ◽  
Dehua Wang ◽  
Cristiane Gonçalves Titto ◽  
Jocelyn Gómez-Prado ◽  
Verónica Carvajal-de la Fuente ◽  
...  

Body-temperature elevations are multifactorial in origin and classified as hyperthermia as a rise in temperature due to alterations in the thermoregulation mechanism; the body loses the ability to control or regulate body temperature. In contrast, fever is a controlled state, since the body adjusts its stable temperature range to increase body temperature without losing the thermoregulation capacity. Fever refers to an acute phase response that confers a survival benefit on the body, raising core body temperature during infection or systemic inflammation processes to reduce the survival and proliferation of infectious pathogens by altering temperature, restriction of essential nutrients, and the activation of an immune reaction. However, once the infection resolves, the febrile response must be tightly regulated to avoid excessive tissue damage. During fever, neurological, endocrine, immunological, and metabolic changes occur that cause an increase in the stable temperature range, which allows the core body temperature to be considerably increased to stop the invasion of the offending agent and restrict the damage to the organism. There are different metabolic mechanisms of thermoregulation in the febrile response at the central and peripheral levels and cellular events. In response to cold or heat, the brain triggers thermoregulatory responses to coping with changes in body temperature, including autonomic effectors, such as thermogenesis, vasodilation, sweating, and behavioral mechanisms, that trigger flexible, goal-oriented actions, such as seeking heat or cold, nest building, and postural extension. Infrared thermography (IRT) has proven to be a reliable method for the early detection of pathologies affecting animal health and welfare that represent economic losses for farmers. However, the standardization of protocols for IRT use is still needed. Together with the complete understanding of the physiological and behavioral responses involved in the febrile process, it is possible to have timely solutions to serious problem situations. For this reason, the present review aims to analyze the new findings in pathophysiological mechanisms of the febrile process, the heat-loss mechanisms in an animal with fever, thermoregulation, the adverse effects of fever, and recent scientific findings related to different pathologies in farm animals through the use of IRT.


Author(s):  
Anna Lubkowska ◽  
Monika Chudecka

Thermography is widely used in the medical field, including in the detection of breast disorders. The aim of the research was to characterize the range of breast surface temperature values, taking into account the entire area of the mammary gland and, independently, the nipple, in healthy women. An additional aim was to assess the symmetry of the breast temperature distribution (using an IR camera) and the correlation of temperatures with the content of adipose tissue. Thermograms were made for the right and left breasts, each time delineating the area of the entire breast and a separate area of the nipple, chest, and abdomen. Analyzing the intergroup differences in temperature of selected body areas (Tmean), it was shown that, in all cases, they were significantly higher in younger women. Statistical analysis showed no significant differences between breast and nipple temperatures in relation to the body sides. The highest temperatures within the mammary gland were recorded for the nipple area. The use of the high-resolution digital infrared thermal imaging method in early and screening preventive diagnoses of changes in the mammary gland requires individual interpretation of the results, taking into account the assessment of the physiological pattern of temperature distribution in both breasts.


Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 698
Author(s):  
Kateryna Kostyk ◽  
Michal Hatala ◽  
Viktoriia Kostyk ◽  
Vitalii Ivanov ◽  
Ivan Pavlenko ◽  
...  

To solve a number of technological issues, it is advisable to use mathematical modeling, which will allow us to obtain the dependences of the influence of the technological parameters of chemical and thermal treatment processes on forming the depth of the diffusion layers of steels and alloys. The paper presents mathematical modeling of diffusion processes based on the existing chemical and thermal treatment of steel parts. Mathematical modeling is considered on the example of 38Cr2MoAl steel after gas nitriding. The gas nitriding technology was carried out at different temperatures for a duration of 20, 50, and 80 h in the SSHAM-12.12/7 electric furnace. When modeling the diffusion processes of surface hardening of parts in general, providing a specifically given distribution of nitrogen concentration over the diffusion layer’s depth from the product’s surface was solved. The model of the diffusion stage is used under the following assumptions: The diffusion coefficient of the saturating element primarily depends on temperature changes; the metal surface is instantly saturated to equilibrium concentrations with the saturating atmosphere; the surface layer and the entire product are heated unevenly, that is, the product temperature is a function of time and coordinates. Having satisfied the limit, initial, and boundary conditions, the temperature distribution equations over the diffusion layer’s depth were obtained. The final determination of the temperature was solved by an iterative method. Mathematical modeling allowed us to get functional dependencies for calculating the temperature distribution over the depth of the layer and studying the influence of various factors on the body’s temperature state of the body.


Sign in / Sign up

Export Citation Format

Share Document