scholarly journals Amorphous anion-rich titanium polysulfides for aluminum-ion batteries

2021 ◽  
Vol 7 (35) ◽  
pp. eabg6314
Author(s):  
Zejing Lin ◽  
Minglei Mao ◽  
Chenxing Yang ◽  
Yuxin Tong ◽  
Qinghao Li ◽  
...  
Keyword(s):  
High Performance ◽  
Reversible Capacity ◽  
Single Electron Transfer ◽  
High Concentration ◽  
Coordination Numbers ◽  
Strong Electrostatic Interaction ◽  
Long Duration ◽  
Dynamics Simulations ◽  
And Storage ◽  
Redox Centers

The strong electrostatic interaction between Al3+ and close-packed crystalline structures, and the single-electron transfer ability of traditional cationic redox cathodes, pose challenged for the development of high-performance rechargeable aluminum batteries. Here, to break the confinement of fixed lattice spacing on the diffusion and storage of Al-ion, we developed a previously unexplored family of amorphous anion-rich titanium polysulfides (a-TiSx, x = 2, 3, and 4) (AATPs) with a high concentration of defects and a large number of anionic redox centers. The AATP cathodes, especially a-TiS4, achieved a high reversible capacity of 206 mAh/g with a long duration of 1000 cycles. Further, the spectroscopy and molecular dynamics simulations revealed that sulfur anions in the AATP cathodes act as the main redox centers to reach local electroneutrality. Simultaneously, titanium cations serve as the supporting frameworks, undergoing the evolution of coordination numbers in the local structure.

Quantitation of Δ8-THC, Δ9-THC, Cannabidiol and 10 Other Cannabinoids and Metabolites in Oral Fluid by HPLC–MS-MS

2020 ◽  
Author(s):  
Lin Lin ◽  
Piyadarsha Amaratunga ◽  
Jerome Reed ◽  
Pornkamol Huang ◽  
Bridget Lorenz Lemberg ◽  
...  
Keyword(s):  
Human Subject ◽  
High Performance ◽  
Oral Fluid ◽  
Solid Phase ◽  
Forensic Toxicology ◽  
High Concentration ◽  
Driving Impairment ◽  
Three Samples ◽  
Cannabidiolic Acid ◽  
Liquid Chromatography Tandem Mass

Abstract Quantitative analysis of Δ9-tetrahydrocannabinol (Δ9-THC) in oral fluid has gained increasing interest in clinical and forensic toxicology laboratories. New medicinal and/or recreational cannabinoid products require laboratories to distinguish different patterns of cannabinoid use. This study validated a high-performance liquid chromatography-tandem mass spectrometry method for 13 different cannabinoids, including (-)-trans-Δ8-tetrahydrocannabinol (Δ8-THC), (-)-trans-Δ9-tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD), Δ9-tetrahydrocannabinolic acid-A (Δ9-THCA-A), cannabidiolic acid (CBDA), 11-hydroxy-Δ9-tetrahydrocannabinol (11-OH-Δ9-THC), 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (Δ9-THCCOOH), tetrahydrocannabivarin (THCV), cannabidivarin (CBDV), cannabidiorcol (CBD-C1), cannabichromene (CBC), cannabinol (CBN) and cannabigerol (CBG), in oral fluid. Baseline separation was achieved in the entire quantitation range between Δ9-THC and its isomer Δ8-THC. The quantitation range of Δ9-THC, Δ8-THC and CBD was from 0.1 to 800 ng/mL. Two hundred human subject oral fluid samples were analyzed with this method after solid phase extraction. Among the 200 human subject oral fluid samples, all 13 cannabinoid analytes were confirmed in at least one sample. Δ8-THC was confirmed in 11 samples, with or without the presence of Δ9-THC. A high concentration of 11-OH-Δ9-THC or Δ9-THCCOOH (>400 ng/mL) was confirmed in three samples. CBD, Δ9-THCA-A, THCV, CBN and CBG were confirmed in 74, 39, 44, 107 and 112 of the 179 confirmed Δ9-THC-positive samples, respectively. The quantitation of multiple cannabinoids and metabolites in oral fluid simultaneously provides valuable information for revealing cannabinoid consumption and interpreting cannabinoid-induced driving impairment.

Controllable Synthesis of Ultrathin Layered Transition Metallic Hydroxide/Zeolitic Imidazolate Framework-67 Hybrid Nanosheets for High-Performance Supercapacitors

2021 ◽  
Author(s):  
Chunli Liu ◽  
Yang Bai ◽  
Ji Wang ◽  
Ziming Qiu ◽  
Huan Pang
Keyword(s):  
Charge Transfer ◽  
Energy Conversion ◽  
High Performance ◽  
2D Materials ◽  
Two Dimensional ◽  
Controllable Synthesis ◽  
Zeolitic Imidazolate Framework ◽  
Fast Charge ◽  
Energy Conversion And Storage ◽  
And Storage

Two-dimensional (2D) materials with structures having diverse features are promising for application in energy conversion and storage. A stronger layered orientation can guarantee fast charge transfer along the 2D planes...

scholarly journals Concentration of Bioactive Phenolic Compounds in Olive Mill Wastewater by Direct Contact Membrane Distillation

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1808
Author(s):  
Rosa Tundis ◽  
Carmela Conidi ◽  
Monica R. Loizzo ◽  
Vincenzo Sicari ◽  
Rosa Romeo ◽  
...  
Keyword(s):  
Direct Contact ◽  
High Performance ◽  
Biological Properties ◽  
Membrane Distillation ◽  
Olive Mill Wastewater ◽  
High Concentration ◽  
Direct Contact Membrane Distillation ◽  
Reducing Activity ◽  
Β Carotene ◽  
Olive Mill

Olive mill wastewater (OMW), generated as a by-product of olive oil production, is considered one of the most polluting effluents produced by the agro-food industry, due to its high concentration of organic matter and nutrients. However, OMW is rich in several polyphenols, representing compounds with remarkable biological properties. This study aimed to analyze the chemical profile as well as the antioxidant and anti-obesity properties of concentrated fractions obtained from microfiltered OMW treated by direct contact membrane distillation (DCMD). Ultra-high performance liquid chromatography (UHPLC) analyses were applied to quantify some phenols selected as phytochemical markers. Moreover, α-Amylase, α-glucosidase, and lipase inhibitory activity were investigated together with the antioxidant activity by means of assays, namely β-carotene bleaching, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic) acid (ABTS) diammonium salts, 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, and Ferric Reducing Activity Power (FRAP) tests. MD retentate—which has content of about five times greater of hydroxytyrosol and verbascoside and about 7 times greater of oleuropein than the feed—was more active as an antioxidant in all applied assays. Of interest is the result obtained in the DPPH test (an inhibitory concentration 50% (IC50) of 9.8 μg/mL in comparison to the feed (IC50 of 97.2 μg/mL)) and in the ABTS assay (an IC50 of 0.4 μg/mL in comparison to the feed (IC50 of 1.2 μg/mL)).

scholarly journals Elucidation of the Crystal Growth Characteristics of SnO2 Nanoaggregates Formed by Sequential Low-Temperature Sol-Gel Reaction and Freeze Drying

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1738
Author(s):  
Saeid Vafaei ◽  
Alexander Wolosz ◽  
Catlin Ethridge ◽  
Udo Schnupf ◽  
Nagisa Hattori ◽  
...  
Keyword(s):  
Crystal Growth ◽  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Freeze Drying ◽  
Sno2 Nanoparticles ◽  
Sol Gel ◽  
Functional Materials ◽  
Cost Effective ◽  
High Concentration

SnO2 nanoparticles are regarded as attractive, functional materials because of their versatile applications. SnO2 nanoaggregates with single-nanometer-scale lumpy surfaces provide opportunities to enhance hetero-material interfacial areas, leading to the performance improvement of materials and devices. For the first time, we demonstrate that SnO2 nanoaggregates with oxygen vacancies can be produced by a simple, low-temperature sol-gel approach combined with freeze-drying. We characterize the initiation of the low-temperature crystal growth of the obtained SnO2 nanoaggregates using high-resolution transmission electron microscopy (HRTEM). The results indicate that Sn (II) hydroxide precursors are converted into submicrometer-scale nanoaggregates consisting of uniform SnO2 spherical nanocrystals (2~5 nm in size). As the sol-gel reaction time increases, further crystallization is observed through the neighboring particles in a confined part of the aggregates, while the specific surface areas of the SnO2 samples increase concomitantly. In addition, X-ray photoelectron spectroscopy (XPS) measurements suggest that Sn (II) ions exist in the SnO2 samples when the reactions are stopped after a short time or when a relatively high concentration of Sn (II) is involved in the corresponding sol-gel reactions. Understanding this low-temperature growth of 3D SnO2 will provide new avenues for developing and producing high-performance, photofunctional nanomaterials via a cost-effective and scalable method.

scholarly journals Changes in Optical Properties upon Dye–Clay Interaction: Experimental Evaluation and Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 197
Author(s):  
Giorgia Giovannini ◽  
René M. Rossi ◽  
Luciano F. Boesel
Keyword(s):  
Optical Properties ◽  
Hybrid Materials ◽  
High Performance ◽  
Fluorescent Properties ◽  
Chemical Mechanisms ◽  
Strong Electrostatic Interaction ◽  
Potential Applications ◽  
Photochemical Properties ◽  
Physical And Chemical ◽  
The Relationship

The development of hybrid materials with unique optical properties has been a challenge for the creation of high-performance composites. The improved photophysical and photochemical properties observed when fluorophores interact with clay minerals, as well as the accessibility and easy handling of such natural materials, make these nanocomposites attractive for designing novel optical hybrid materials. Here, we present a method of promoting this interaction by conjugating dyes with chitosan. The fluorescent properties of conjugated dye–montmorillonite (MMT) hybrids were similar to those of free dye–MMT hybrids. Moreover, we analyzed the relationship between the changes in optical properties of the dye interacting with clay and its structure and defined the physical and chemical mechanisms that take place upon dye–MMT interactions leading to the optical changes. Conjugation to chitosan additionally ensures stable adsorption on clay nanoplatelets due to the strong electrostatic interaction between chitosan and clay. This work thus provides a method to facilitate the design of solid-state hybrid nanomaterials relevant for potential applications in bioimaging, sensing and optical purposes.

scholarly journals Transport and storage of serotonin by thrombin-treated platelets.

1975 ◽  
Vol 65 (2) ◽  
pp. 359-372 ◽  
Author(s):  
H J Reimers ◽  
D J Allen ◽  
I A Feuerstein ◽  
J F Mustard
Keyword(s):  
Storage Capacity ◽  
Platelet Membrane ◽  
Transport Rate ◽  
Primary Reason ◽  
High Concentration ◽  
Serotonin Content ◽  
Amine Storage ◽  
Storage Granules ◽  
And Storage ◽  
Amine Storage Granules

Repeated thrombin treatment of washed platelets prepared from rabbits can decrease the serotonin content of the platelets by about 80%. When these platelets are deaggregated they reaccumulate serotonin but their storage capacity for serotonin is reduced by about 60%. If thrombin-pretreated platelets are allowed to equilibrate with a high concentration of serotonin (123 mu M), they release a smaller percentage of their total serotonin upon further thrombin treatment, in comparison with the percentage of serotonin released from control platelets equilibrated with the same concentration of serotonin calculations indicate that in thrombin-treated platelets reequilibrated with serotonin, two-thirds of the serotonin is in the granule compartment and one-third is in the extragranular compartment, presumably the cytoplasm. Analysis of the exchange of serotonin between the suspending fluid and the platelets showed that thrombin treatment does not alter the transport rate of serotonin across the platelet membrane and does not cause increased diffusion of serotonin from the platelets into the suspending fluid. The primary reason for the reduced serotonin accumulation by the thrombin-treated platelets appears to be loss of amine storage granules or of the storage capacity within the granules.

scholarly journals Novel core–shell structured Si/S-doped-carbon composite with buffering voids as high performance anode for Li-ion batteries

RSC Advances ◽  
2017 ◽  
Vol 7 (5) ◽  
pp. 2407-2414 ◽  
Author(s):  
Dan Shao ◽  
Inna Smolianova ◽  
Daoping Tang ◽  
Lingzhi Zhang
Keyword(s):  
Hydrothermal Method ◽  
High Performance ◽  
Reversible Capacity ◽  
Carbon Composite ◽  
Core Shell ◽  
Li Ion Batteries ◽  
Li Ion

Novel core–shell structured Si/S-doped carbon composite with buffering voids prepared by hydrothermal method and followed by carbonization and removal of template layer, exhibiting a reversible capacity of 664 mA h g−1 over 300 cycles.

scholarly journals Effective ion pathways and 3D conductive carbon networks in bentonite host enable stable and high-rate lithium–sulfur batteries

2021 ◽  
Vol 10 (1) ◽  
pp. 20-33
Author(s):  
Lian Wu ◽  
Yongqiang Dai ◽  
Wei Zeng ◽  
Jintao Huang ◽  
Bing Liao ◽  
...  
Keyword(s):  
Network Architecture ◽  
High Performance ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
High Rate ◽  
Lithium Sulfur Batteries ◽  
Carbon Networks ◽  
Carbon Coated ◽  
Lithium Sulfur ◽  
Initial Capacity

Abstract Fast charge transfer and lithium-ion transport in the electrodes are necessary for high performance Li–S batteries. Herein, a N-doped carbon-coated intercalated-bentonite (Bent@C) with interlamellar ion path and 3D conductive network architecture is designed to improve the performance of Li–S batteries by expediting ion/electron transport in the cathode. The interlamellar ion pathways are constructed through inorganic/organic intercalation of bentonite. The 3D conductive networks consist of N-doped carbon, both in the interlayer and on the surface of the modified bentonite. Benefiting from the unique structure of the Bent@C, the S/Bent@C cathode exhibits a high initial capacity of 1,361 mA h g−1 at 0.2C and achieves a high reversible capacity of 618.1 m Ah g−1 at 2C after 500 cycles with a sulfur loading of 2 mg cm−2. Moreover, with a higher sulfur loading of 3.0 mg cm−2, the cathode still delivers a reversible capacity of 560.2 mA h g−1 at 0.1C after 100 cycles.

Communication Principle of Literature Database Based on Spatial and Temporal Segmentation Technology

2014 ◽  
Vol 543-547 ◽  
pp. 2418-2421
Author(s):  
Yong Wang
Keyword(s):  
High Performance ◽  
Database System ◽  
Lake Area ◽  
Temporal Segmentation ◽  
New Town ◽  
Database Construction ◽  
Poyang Lake Area ◽  
The Mathematical Model ◽  
And Storage ◽  
Computer Resources

In this paper we introduce cross tree and block mathematical principles into the design of database system, divide the time sequence and storage space of computer database system, establish the mathematical model and algorithm of computer resources database system, and design the test database system. In this paper, we use high performance interface of Display Port, by way of coupling to communicate on two port control, and use RHEL 6.2 Linux virtual machine to do simulation experiment on process of database system. Through the simulation we find the API which is called by Read, Close, Mmap, Stat, Fstat is similar. It is consistent with the actual situation, and verifies the reliability of the program. Finally, we apply the database system to the network database construction of sports literature resources in the new town of Poyang Lake area. It reaches the effect that sport resources are shared by all. It provides technical support for the application of computer database system.

Sign in / Sign up

Export Citation Format

Share Document