MONTE CARLO CODE FOR STUDY OF THE RESPONSE FUNCTION OF Si(Li) DETECTORS FOR X-RAYS

1999 ◽  
Vol 09 (03n04) ◽  
pp. 135-141
Author(s):  
KÁROLY TŐKÉSI ◽  
TAKESHI MUKOYAMA
Keyword(s):  
Monte Carlo ◽  
Present Model ◽  
Monte Carlo Code ◽  
X Rays ◽  
Model Calculations ◽  
X Ray ◽  
Line Shapes ◽  
Calculated Line ◽  
The Individual ◽  
Good Agreement

For more detailed understanding of the line shape of X-ray peaks observed with Si ( Li ) detectors, a new Monte Carlo code was developed and tested in the range of incident X-ray energy less than 5 keV. In our simulation the individual elastic and inelastic processes in the solid and the charge collection probabilities in the different region of detectors are taken into account. The results of our model calculations are compared with experimental data. In general, good agreement is found between the experimental and calculated line shapes. This fact demonstrates the validity of the present model.

scholarly journals Characterization of laser-driven electron and photon beams using the Monte Carlo code FLUKA

2014 ◽  
Vol 32 (2) ◽  
pp. 233-241 ◽  
Author(s):  
F. Fiorini ◽  
D. Neely ◽  
R.J. Clarke ◽  
S. Green
Keyword(s):  
Monte Carlo ◽  
Electron Temperature ◽  
Spectral Characteristics ◽  
Simulation Method ◽  
Target Thickness ◽  
Monte Carlo Code ◽  
X Rays ◽  
Photon Beams ◽  
X Ray ◽  
Plasma Effects

AbstractWe present a new simulation method to predict the maximum possible yield of X-rays produced by electron beams accelerated by petawatt lasers irradiating thick solid targets. The novelty of the method lies in the simulation of the electron refiluxing inside the target implemented with the Monte Carlo code Fluka. The mechanism uses initial theoretical electron spectra, cold targets and refiluxing electrons forced to re-enter the target iteratively. Collective beam plasma effects are not implemented in the simulation. Considering the maximum X-ray yield obtained for a given target thickness and material, the relationship between the irradiated target mass thickness and the initial electron temperature is determined, as well as the effect of the refiluxing on X-ray yield. The presented study helps to understand which electron temperature should be produced in order to generate a particular X-ray beam. Several applications, including medical and security imaging, could benefit from laser generated X-ray beams, so an understanding of the material and the thickness maximizing the yields or producing particular spectral characteristics is necessary. On the other more immediate hand, if this study is experimentally reproduced at the beginning of an experiment in which there is an interest in laser-driven electron and/or photon beams, it can be used to check that the electron temperature is as expected according to the laser parameters.

scholarly journals MoCA: A Monte Carlo code for Comptonisation in Astrophysics

2018 ◽  
Vol 619 ◽  
pp. A105 ◽  
Author(s):  
Francesco Tamborra ◽  
Giorgio Matt ◽  
Stefano Bianchi ◽  
Michal Dovčiak
Keyword(s):  
Monte Carlo ◽  
Optical Thickness ◽  
Thermal Emission ◽  
Single Photon ◽  
Spherical Geometry ◽  
Accretion Disc ◽  
Monte Carlo Code ◽  
X Ray ◽  
First Results ◽  
Good Agreement

We present a new Monte Carlo code for Comptonisation in Astrophysics (MoCA). To our knowledge MoCA is the first code that uses a single photon approach in a full special relativity scenario, and including also Klein–Nishina effects as well as polarisation. In this paper we describe in detail how the code works, and show first results from the case of extended coronae in accreting sources Comptonising the accretion disc thermal emission. We explored both a slab and a spherical geometry, to make comparison with public analytical codes more easy. Our spectra are in good agreement with those from analytical codes for low/moderate optical depths, but differ significantly, as expected, for optical depths larger than a few. Klein–Nishina effects become relevant above 100 keV depending on the optical thickness and thermal energy of the corona. We also calculated the polarisation properties for the two geometries, which show that X-ray polarimetry is a very useful tool to discriminate between them.

X-Ray Diffuse Scattering from Misfit Dislocation at Buried Interface

2001 ◽  
Vol 673 ◽  
Author(s):  
Kaile Li ◽  
Paul F. Miceli ◽  
Christian Lavoie ◽  
Tom Tiedje ◽  
Karen L. Kavanagh
Keyword(s):  
Diffuse Scattering ◽  
Present Model ◽  
Misfit Dislocations ◽  
Model Calculations ◽  
X Ray ◽  
High Q ◽  
X Ray Scattering ◽  
Low Dislocation Density ◽  
Good Agreement ◽  
Ray Scattering

ABSTRACTMotivated by x-ray scattering experiments on heteroepitaxially grown thin films, we present model calculations of the diffuse x-ray scattering arising from misfit dislocations. The model is based on the elastic displacements from dislocations whose positions are spatially uncorrelated. These numerical results give support to a phenomenological model [Phys. Rev. B 51, 5506 (1995)] that predicts the scaling of diffuse scattering intensity with perpendicular wavevector, Qz. At low Qz the diffuse width scales inversely with the defect size, which is given by the film thickness due to the effect of the elastic image field, whereas at high Qz the diffuse width is mosaic-like, scaling with Qz. New experimental results for InxGa1−xAs/GaAs are also presented and compared to the model. The calculations are in good agreement with these experiments, as well as other measurements in the literature for high and low dislocation density.

scholarly journals Monte Carlo derivation of filtered tungsten anode X-ray spectra for dose computation in digital mammography

2015 ◽  
Vol 48 (6) ◽  
pp. 363-367 ◽  
Author(s):  
Lucas Paixão ◽  
Bruno Beraldo Oliveira ◽  
Carolina Viloria ◽  
Marcio Alves de Oliveira ◽  
Maria Helena Araújo Teixeira ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Digital Mammography ◽  
Relative Difference ◽  
Monte Carlo Code ◽  
Solid State Detector ◽  
X Ray ◽  
Direct Radiography ◽  
State Detector ◽  
Tungsten Anode ◽  
Good Agreement

Abstract Objective: Derive filtered tungsten X-ray spectra used in digital mammography systems by means of Monte Carlo simulations. Materials and Methods: Filtered spectra for rhodium filter were obtained for tube potentials between 26 and 32 kV. The half-value layer (HVL) of simulated filtered spectra were compared with those obtained experimentally with a solid state detector Unfors model 8202031-H Xi R/F & MAM Detector Platinum and 8201023-C Xi Base unit Platinum Plus w mAs in a Hologic Selenia Dimensions system using a direct radiography mode. Results: Calculated HVL values showed good agreement as compared with those obtained experimentally. The greatest relative difference between the Monte Carlo calculated HVL values and experimental HVL values was 4%. Conclusion: The results show that the filtered tungsten anode X-ray spectra and the EGSnrc Monte Carlo code can be used for mean glandular dose determination in mammography.

Experimental measurements and Monte Carlo modelling of the XSTRAHL 150 superficial X-ray therapy unit

2014 ◽  
Vol 14 (1) ◽  
pp. 43-55
Author(s):  
Fayez H. H. Al-Ghorabie
Keyword(s):  
Monte Carlo ◽  
Theoretical Calculations ◽  
Beam Quality ◽  
Patient Treatment ◽  
Experimental Measurements ◽  
Monte Carlo Code ◽  
X Ray ◽  
Percentage Depth Dose ◽  
Depth Dose ◽  
Good Agreement

AbstractBackgroundSuperficial X-ray therapy units are used for the treatment of certain types of skin cancer and some severe dermatological conditions. The performance assessment and beam characteristics of the superficial unit are very important to ensure accurate dose delivery during patient treatment. Both experimental measurements and Monte Carlo calculations can be used for this purpose.PurposeThis study aims to investigate whether it is possible to reproduce experimentally measured data for the XSTRAHL 150 superficial X-ray unit with simulations using the BEAMnrc Monte Carlo code.Materials and MethodsThe experimental procedure applied in this study included the following: experimental measurements of different X-ray spectra, half-value layers, percentage depth dose and beam profiles. Monte Carlo modelling of the XSTRAHL 150 unit was performed with the BEAMnrc code. The validity of the model was checked by comparing the theoretical calculations with experimental measurements.ResultsThere was good agreement (∼1%) between experimentally measured and simulated X-ray spectra. Results of half-value layers obtained from simulated and measured spectra showed that there was a maximum of 3·6% difference between BEAMnrc and measurements and a minimum of 2·3%. In addition, simulated percentage depth dose and profile curves have been compared against experimental measurements and show good agreement (within 2% for the depth dose curves and 3–5% for beam profile curves, depending on the applicator size).ConclusionThe results of this study provide information about particles’ interaction in different kilovoltage and filter combinations. This information is useful for X-ray tube design and development of new target/filter combinations to improve beam quality in superficial X-ray radiotherapy. The data presented here may provide a base for comparison and a reference for other or potential new users of the XSTRAHL 150 X-ray unit.

scholarly journals Physical and chemical imaging of adhesive interfaces with soft X-rays

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Hiroyuki Yamane ◽  
Masaki Oura ◽  
Osamu Takahashi ◽  
Tomoko Ishihara ◽  
Noriko Yamazaki ◽  
...  
Keyword(s):  
Molecular Level ◽  
Covalent Bond ◽  
Chemical Imaging ◽  
Diglycidyl Ether ◽  
X Rays ◽  
X Ray ◽  
Covalent Bond Formation ◽  
Chemical States ◽  
The Individual ◽  
Physical And Chemical

AbstractAdhesion is an interfacial phenomenon that is critical for assembling carbon structural composites for next-generation aircraft and automobiles. However, there is limited understanding of adhesion on the molecular level because of the difficulty in revealing the individual bonding factors. Here, using soft X-ray spectromicroscopy we show the physical and chemical states of an adhesive interface composed of a thermosetting polymer of 4,4’-diaminodiphenylsulfone-cured bisphenol A diglycidyl ether adhered to a thermoplastic polymer of plasma-treated polyetheretherketone. We observe multiscale phenomena in the adhesion mechanisms, including sub-mm complex interface structure, sub-μm distribution of the functional groups, and molecular-level covalent-bond formation. These results provide a benchmark for further research to examine how physical and chemical states correlate with adhesion, and demonstrate that soft X-ray imaging is a promising approach for visualizing the physical and chemical states at adhesive interfaces from the sub-mm level to the molecular level.

Development of Standard X-Ray Beams for Calibration of Radiobiology Cabinet and Conformal Irradiators

2021 ◽  
Author(s):  
Emily J. King ◽  
Natalie N. Viscariello ◽  
Larry A. DeWerd
Keyword(s):  
Monte Carlo Code ◽  
X Rays ◽  
Energy Agency ◽  
X Ray ◽  
Measurement Models ◽  
Dose Determination ◽  
University Of Wisconsin ◽  
Free Air ◽  
Accurate Dose ◽  
The University

This work seeks to develop standard X-ray beams that are matched to radiobiology X-ray irradiators. The calibration of detectors used for dose determination of these irradiators is performed with a set of standard X rays that are more heavily filtered and/or lower energy, which leads to a higher uncertainty in the dose measurement. Models of the XRad320, SARRP, and the X-ray tube at the University of Wisconsin Medical Radiation Research Center (UWMRRC) were created using the BEAMnrc user code of the EGSnrc Monte Carlo code system. These models were validated against measurements, and the resultant modeled spectra were used to determine the amount of added filtration needed to match the X-ray beams at the UWMRRC to those of the XRad320 and SARRP. The depth profiles and half-value layer (HVL) simulations performed using BEAMnrc agreed to measurements within 3% and 3.6%, respectively. A primary measurement device, a free-air chamber, was developed to measure air kerma in the medium energy range of X rays. The resultant spectra of the matched beams had HVL's that matched the HVL's of the radiobiology irradiators well within the 3% criteria recommended by the International Atomic Energy Agency (IAEA) and the average energies agreed within 2.4%. In conclusion, three standard X-ray beams were developed at the UWMRRC with spectra that more closely match the spectra of the XRad320 and SARRP radiobiology irradiators, which will aid in a more accurate dose determination during calibration of these irradiators.

scholarly journals A comprehensive Monte Carlo study to design a novel multi-nanoparticle loaded nanocomposites for augmentation of attenuation coefficient in the energy range of diagnostic X-rays

2021 ◽  
Vol 27 (4) ◽  
pp. 279-289
Author(s):  
Elahe Sayyadi ◽  
Asghar Mesbahi ◽  
Reza Eghdam Zamiri ◽  
Farshad Seyyed Nejad
Keyword(s):  
Monte Carlo ◽  
Energy Range ◽  
Radiation Protection ◽  
Experimental Studies ◽  
Rubber Matrix ◽  
Photon Flux ◽  
Monte Carlo Code ◽  
X Rays ◽  
Wide Range ◽  
Shielding Properties

Abstract Introduction: The present study aimed to investigate the radiation protection properties of silicon-based composites doped with nano-sized Bi2O3, PbO, Sm2O3, Gd2O3, WO3, and IrO2 particles. Radiation shielding properties of Sm2O3 and IrO2 nanoparticles were investigated for the first time in the current study. Material and methods: The MCNPX (2.7.0) Monte Carlo code was utilized to calculate the linear attenuation coefficients of single and multi-nano structured composites over the X-ray energy range of 10–140 keV. Homogenous distribution of spherical nanoparticles with a diameter of 100 nm in a silicon rubber matrix was simulated. The narrow beam geometry was used to calculate the photon flux after attenuation by designed nanocomposites. Results: Based on results obtained for single nanoparticle composites, three combinations of different nano-sized fillers Sm2O3+WO3+Bi2O3, Gd2O3+WO3+Bi2O3, and Sm2O3+WO3+PbO were selected, and their shielding properties were estimated. In the energy range of 20-60 keV Sm2O3 and Gd2O3 nanoparticles, in 70-100 keV energy range WO3 and for photons energy higher than 90 keV, PbO and Bi2O3 nanoparticles showed higher attenuation. Despite its higher density, IrO2 had lower attenuation compared to other nanocomposites. The results showed that the nanocomposite containing Sm2O3, WO3, and Bi2O3 nanoparticles provided better shielding among the studied samples. Conclusions: All studied multi-nanoparticle nanocomposites provided optimum shielding properties and almost 8% higher attenuation relative to single nano-based composites over a wide range of photon energy used in diagnostic radiology. Application of these new composites is recommended in radiation protection. Further experimental studies are suggested to validate our findings.

scholarly journals A hydroxyapatite phantom material for the calibration of in vivo x-ray fluorescence systems of bone strontium and lead quantification

2021 ◽  
Author(s):  
Eric Da Silva
Keyword(s):  
Monte Carlo ◽  
Soft Tissue ◽  
Monte Carlo Simulations ◽  
Calibration Procedure ◽  
X Rays ◽  
X Ray ◽  
Total Phosphate Concentration ◽  
High Concentrations ◽  
Phantom Material

A hydroxyaptite [HAp; Ca5(PO4)3OH] phantom material was developed with the goal of improving the calibration protocol of the 125I-induced in vivo X-ray fluorescence (IVXRF) system of bone strontium quantification with further application to other IVXRF bone metal quantification systems, particulary those associated with bone lead quantification. It was found that calcium can be prepared pure of inherent contamination from strontium (and other elements) through a hydroxide precipitation producing pure Ca(OH)2, thereby, allowing for the production of a blank phantom which has not been available previously. The pure Ca(OH)2 can then be used for the preparation of pure CaHPO4 ⋅ 2H2O. A solid state pure HAp phantom can then be prepared by reaction of Ca(OH)2 and CaHPO4 ⋅ 2H2O mixed as to produce a Ca/P mole ratio of 1.67, that in HAp and the mineral phase of bone, in the presence of a setting solution prepared as to raise the total phosphate concentration of the solution by increasing the solubility CaHPO4 ⋅ 2H2O and thereby precipitating HAp. The procedure can only be used to prepare phantoms in which doping with the analyte does not disturb the Ca/P ratio substantially. In cases in which phantoms are to be prepared with high concentrations of strontium, the cement mixture can be modified as to introduce strontium in the form of Sr(OH)2 ⋅ 8H2O as to maintain a (Ca + Sr)/P ratio of 1.67. It was found by both X-ray diffraction spectrometry and Raman spectroscopy studies that strontium substitutes for calcium as in bone when preparing phantoms by this route. The necessity for the blank bone phantoms was assessed through the first blank bone phantom measurement and Monte Carlo simulations. It was found that for the 125I-induced IVXRF system of bone strontium quantification, the source, 125I brachytherapy seeds may be contributing coherently and incoherently scattered zirconium X-rays to the measured spectra, thereby requiring the use of the blank bone phantom as a means of improving the overall quantification methodology. Monte Carlo simulations were employed to evaluate any improvement by the introduction of HAp phantoms into the coherent normalization-based calibration procedure. It was found that HAp phantoms remove the need for a coherent conversion factor (CCF) thereby potentially increasing accuracy of the quantification. Further, it was found that in order for soft tissue attenuation corrections to be possible using spectroscopic information alone, HAp along with a suitable soft tissue surrogate material need to be employed. The HAp phantom material was used for the evaluations of portable X-ray analyzer systems for their potential for IVXRF quantification of lead and strontium with a focus on a comparison between tungsten, silver and rhodium target systems. Silver and rhodium target X-ray tube systems were found to be comparable for this quantification.

scholarly journals Experimentally obtained and computer-simulated X-ray non-coplanar 18-beam pinhole topographs for a silicon crystal

2019 ◽  
Vol 75 (3) ◽  
pp. 483-488 ◽  
Author(s):  
Kouhei Okitsu ◽  
Yasuhiko Imai ◽  
Yoshitaka Yoda
Keyword(s):  
Silicon Crystal ◽  
Dynamical Theory ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Good Agreement

Non-coplanar 18-beam X-ray pinhole topographs for a silicon crystal were computer simulated by fast Fourier transforming the X-ray rocking amplitudes that were obtained by solving the n-beam (n = 18) Ewald–Laue dynamical theory (E-L&FFT method). They were in good agreement with the experimentally obtained images captured using synchrotron X-rays. From this result and further consideration based on it, it has been clarified that the X-ray diffraction intensities when n X-ray waves are simultaneously strong in the crystal can be computed for any n by using the E-L&FFT method.

Sign in / Sign up

Export Citation Format

Share Document