MOLECULAR BEAM EPITAXY OF Fe/Cu MULTILAYERED FILMS AND ITS MAGNETOOPTICAL PROPERTIES

1993 ◽  
Vol 07 (01n03) ◽  
pp. 466-469
Author(s):  
V. P. KONONOV ◽  
S. G. OVCHINNIKOV ◽  
E. P. VASILYEVA ◽  
V. N. ZABLUDA ◽  
V. M. POPEL ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Spectral Dependence ◽  
Faraday Effect ◽  
Molecular Beam ◽  
Auger Spectroscopy ◽  
Multilayered Structure ◽  
Multilayered Structures ◽  
Multilayered Films ◽  
X Ray ◽  
Composition And Structure

Multilayered structures of 10 Fe layers (25 Å each) and 9 layers of Cu (50 Å) have been obtained by MBE technique using a 3-chambers MBE installation "Angara". For comparison Fe film with the thickness d = 250 Å have been prepared. The chemical composition and structure of the films were controlled by X-ray fluorescent analysis, Auger spectroscopy and electron microscopy measurements. Field dependencies of the magnetooptical Faraday effect were measured at different geometries. Spectral dependence of the Faraday effect revealed a maximum at 700 nm wavelength for this multilayered structure.

scholarly journals Structure and Characterization of TiC/GLC Multilayered Films with Various Bilayers Periods

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 787
Author(s):  
Weiqi Wang ◽  
Xiaoming Ling ◽  
Rui Wang ◽  
Wenhao Nie ◽  
Li Ji ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Chemical Compositions ◽  
Closed Field ◽  
Multilayered Structures ◽  
Multilayered Films ◽  
Sputtering Deposition ◽  
X Ray ◽  
Mechanical And Tribological Properties ◽  
Self Organizing

The spontaneously self-organizing multilayered graphite-like carbon (denoted as GLC) /TiC films with various bilayer periods in the range of 13.3–17.5 nm were deposited on silicon and 1Cr18Mn8Ni5N stainless steel substrates using closed field magnetron sputtering deposition facility. The microstructures and chemical compositions of the prepared multilayered films were characterized by scanning electron microscopy, high resolution transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy respectively. The self-organizing multilayered structures in all of the films consisted of titanium carbide layers and sp2-rich carbon layers periodically alternate arrangement. The TiC contents and bilayer periods of the multilayered films can be controlled by means of adjusting of sputtering current of graphite target. Furthermore, the mechanical and tribological performances of the prepared films were appraised by nano-indentor, scratch measures, and ball-on-plate tribometer respectively. The results indicated that multilayer structure endowed the as-deposited TiC/GLC films outstanding mechanical and tribological properties, especially the multilayer film with 15.9 nm bilayer period deposited at 10 A sputtering current showed the excellent adhesion strength and hardness; Simultaneously it also exhibited the lowest average friction coefficient in the humid environment owing to its high content of sp2 hybrid carbon.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

scholarly journals The use of scanning electron microscopy to the study of the painting from the Church in Radcze

2013 ◽  
Vol 12 (4) ◽  
pp. 095-105
Author(s):  
Beata Klimek
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Historic Buildings ◽  
X Ray ◽  
Composition And Structure ◽  
The Church ◽  
Diagnosis Technique ◽  
Scanning Electron

One of the main tasks in the study of historic buildings is the need to identify the original materials and extensions, which often have historic character. The next task concerns the determination of the composition and structure of the historical, diagnosis technique to develop original paint. The article presents the preliminary results of paintings. Methods were used with the scanning electron microscope was equipped with an energy dispersive X-ray spectrometer (SEM-EDS).

Beta-Cyclodextrin-triggered fabrication of broccoli-like ZnO nanoaggregates with enhanced photocatalytic capability

2020 ◽  
Vol 13 (02) ◽  
pp. 2051004
Author(s):  
Jinyan Xiong ◽  
Wei Li ◽  
Kai Zhao ◽  
Weijie Li ◽  
Gang Cheng
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Separation Efficiency ◽  
Nitrogen Adsorption ◽  
Electrochemical Measurement ◽  
X Ray ◽  
Recombination Efficiency ◽  
Beta Cyclodextrin ◽  
Composition And Structure ◽  
Pollution Removal

Nanocrystallite aggregates have great potential in semiconductor-based photocatalysis toward environmental pollution removal. In this work, we reported the fabrication of broccoli-like zinc oxide nanoaggregates in the presence of beta-cyclodextrin in ethylene glycol-H2O medium. The composition and structure of the as-obtained ZnO nanoaggregates were characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption. It was observed that the beta-cyclodextrin played an important role in the fabrication of such broccoli-like structure. A plausible formation mechanism was discussed on the basis of the controllable experiments. The photocatalytic performance of the products was studied through the photodegradation of rhodamine B under simulated sunlight irradiation. Compared to the spherical ZnO nanoaggregates and ZnO broken spheres, the broccoli-like ZnO exhibited superior photocatalytic efficiency. Based on the photocurrent and electrochemical measurement results, the higher separation efficiency of the photogenerated carriers and lower recombination efficiency of the photoinduced electron–hole pairs over the broccoli-like ZnO nanoaggregates contributed to their remarkable photocatalytic activity.

Oxidation Behavior of Steel and Pure Copper at 500-700°C

2013 ◽  
Vol 421 ◽  
pp. 401-405
Author(s):  
Sang An Ha ◽  
Jei Pil Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Oxidation Behavior ◽  
Pure Copper ◽  
Thermal Gravimetric ◽  
X Ray Diffraction ◽  
X Ray ◽  
Composition And Structure ◽  
Gravimetric Apparatus ◽  
Scanning Electron

The oxidation behavior of steel and pure copper has been investigated in the temperature range of 500-700°C at various oxygen pressures. The rate of oxidation was measured using thermal gravimetric apparatus (TGA). The morphology, composition and structure of the oxide scale were determined by scanning electron microscopy (SEM) and X-ray diffraction (XRD).

scholarly journals Structural Properties and Oxidation Resistance of ZrN/SiNx, CrN/SiNx and AlN/SiNx Multilayered Films Deposited by Magnetron Sputtering Technique

Coatings ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 149 ◽  
Author(s):  
Ihar Saladukhin ◽  
Gregory Abadias ◽  
Vladimir Uglov ◽  
Sergey Zlotski ◽  
Arno Janse van Vuuren ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Magnetron Sputtering ◽  
Oxidation Resistance ◽  
Nanocrystalline Structure ◽  
Xrd Analysis ◽  
Multilayered Films ◽  
Temperature Oxidation ◽  
X Ray ◽  
Si Substrates ◽  
In Situ Xrd

In the present work, the structure, stress state and phase composition of MeN/SiNx (Me = Zr, Cr, Al) multilayered films with the thickness of elementary layers in nanoscale range, as well as their stability to high temperature oxidation, were studied. Monolithic (reference) and multilayered films were deposited on Si substrates at the temperatures of 300 °C (ZrN/SiNx and AlN/SiNx systems) or 450 °C (CrN/SiNx) by reactive magnetron sputtering. The thickness ratios of MeN to SiNx were 5 nm/2 nm, 5 nm/5 nm, 5 nm/10 nm and 2 nm/5 nm. Transmission electron microscopy (TEM), X-ray Reflectivity (XRR) and X-ray Diffraction (XRD) testified to the uniform alternation of MeN and SiNx layers with sharp interlayer boundaries. It was observed that MeN sublayers have a nanocrystalline structure with (001) preferred orientation at 5 nm, but are X-ray amorphous at 2 nm, while SiNx sublayers are always X-ray amorphous. The stability of the coatings to oxidation was investigated by in situ XRD analysis (at the temperature range of 400–950 °C) along with the methods of wavelength-dispersive X-ray spectroscopy (WDS) and scanning electron microscopy (SEM) after air annealing procedure. Reference ZrN and CrN films started to oxidize at the temperatures of 550 and 700 °C, respectively, while the AlN reference film was thermally stable up to 950 °C. Compared to reference monolithic films, MeN/SiNx multilayers have an improved oxidation resistance (onset of oxidation is shifted by more than 200 °C), and the performance is enhanced with increasing fraction of SiNx layer thickness. Overall, CrN/SiNx and AlN/SiNx multilayered films are characterized by noticeably higher resistance to oxidation as compared to ZrN/SiNx multilayers, the best performance being obtained for CrN/SiNx and AlN/SiNx with 5 nm/5 nm and 5 nm/10 nm periods, which remain stable at least up to 950 °C.

Cross-Sectional TEM Study Of Phase Separation In Reaction Of Ni-Ta Films With GaAs

1985 ◽  
Vol 54 ◽  
Author(s):  
A. Lahav ◽  
M. Eizenberg ◽  
Y. Komem
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Transmission Electron Microscopy ◽  
Phase Separation ◽  
Gaas Substrate ◽  
Auger Spectroscopy ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Transmission Electron

ABSTRACTThe reaction between Ni60Ta40 amorphous alloy and (001) GaAs was studied by cross-sectional transmission electron microscopy, Auger spectroscopy, and x-ray diffraction. At 400°C formation of Ni GaAs at the interface with GaAs was observed. After heat treatment at 600°C in vacuum a layered structure of TaAs/NiGa/GaAs has been formed. The NiGa layer has epitaxial relations to the GaAs substrate. The vertical phase separation can be explained by opposite diffusion directions of nickel and arsenic atoms.

Double Periodicity Formation in EuTe/PbTe Superlattices

1995 ◽  
Vol 399 ◽  
Author(s):  
M. Shima ◽  
L. Salamanca-Riba ◽  
G. Springholz ◽  
G. Bauer
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Short Period ◽  
Short Period Superlattices

ABSTRACTMolecular beam epitaxy was used to grow EuTe(x)/PbTe(y) short period superlattices with x=1-4 EuTe(111) monolayers alternating with y≈3x PbTe monolayers. The superlattices were characterized by transmission electron microscopy and high resolution x-ray diffraction. Regions with double periodicity were observed coexisting with areas of nominal periodicity. The sample with x=3.5 and y=9, for example, contains regions with double periodicity of x=7 and y=17. X-ray diffraction measurements confirm the formation of the double periodicity in these samples by the appearance of weak satellites in between the satellites of the nominal periodicity. The double periodicity in the superlattice is believed to result from interdiffusion during the growth. A model for this process is presented.

scholarly journals PREPARATION AND PHYSICAL PROPERTIES OF OPAL MATRICES WITH NANOPARTICLES OF TITANIUM AND IRON OXIDES

2016 ◽  
Vol 11 (6) ◽  
pp. 91-97
Author(s):  
M. I. Samoylovich ◽  
А. F. Belyanin ◽  
A. S. Bagdasaryan
Keyword(s):  
Electron Microscopy ◽  
Raman Spectroscopy ◽  
Hysteresis Loops ◽  
X Ray Diffraction ◽  
Iron Compounds ◽  
Dielectric Characteristics ◽  
X Ray ◽  
Composition And Structure ◽  
Synthesized Materials ◽  
Frequency Dependences

The article considers specific features of the formation of nanocomposites based on the lattice packing of SiO2 nanospheres (opal matrices) with clusters of titanium and iron compounds (FeTiO3, FeTi2O5, TiO2, Fe2O3) embedded into nanopores between spheres. For the formation of the nanocomposites samples of opal matrices with the sizes of single-domain regions > 0.1 mm3 were used. The diameter of the SiO2 nanospheres was ~260 nm. Nanocomposites with the volume > 1 cm3 and 10-15% of interspherical nanospacing filled by crystallites of titanium and iron compounds were obtained. The composition and structure of the nanocomposites were studied by electron microscopy, X-ray diffraction and Raman spectroscopy. The dependence of the composition of the synthesized materials on the conditions of their preparation is shown. Results of measurements of the frequency dependences (within the range 1 MHz - 3 GHz) of the magnetic and dielectric characteristics of the obtained nanostructures are presented. Hysteresis loops were studied for the obtained samples.

Sign in / Sign up

Export Citation Format

Share Document