Fractal nature analysis in porous structured bio-ceramics

2021 ◽  
pp. 2150318
Author(s):  
Vojislav V. Mitić ◽  
Po-Yu Chen ◽  
Yueh-Ying Chou ◽  
Ivana D. Ilić ◽  
Bojana Marković ◽  
...  
Keyword(s):  
Crack Formation ◽  
Fractal Dimensions ◽  
Ice Nucleation ◽  
Sem Analysis ◽  
Freeze Casting ◽  
Fractal Nature ◽  
Hydroxyapatite Scaffold ◽  
First Time ◽  
Ice Sublimation

Hydroxyapatite scaffold is a type of bio-ceramic. Its cellular design has similarities with the morphologies in nature. Therefore, it is very important to control the structure, especially the porosity, as one of the main features for bio-ceramics applications. According to some literature, freeze casting can form the shape of dendrites and remain a foam structure after ice sublimation. Ice nucleation became more heterogeneous with the aid of printing materials during freeze casting. This procedure can even improve the issue of crack formation. In this paper, we studied the mechanical properties of hydroxyapatite scaffold. We also analyzed the porosity by fractal nature characterization, and successfully reconstructed pore shape, which is important for predicting ceramic morphology. We applied SEM analysis on bio-ceramic samples, at four different magnifications for the same pore structure. This is important for fractal analysis and pores reconstruction. We calculated the fractal dimensions based on measurements. In this way, we completed the fractal characterization of porosity and confirmed possibilities for successful porous shapes reconstruction. In this paper, we confirmed, for the first time, that fractal nature can be successfully applied in the area of porous bio-ceramics.

scholarly journals Characterization of the Pyrolytic Products of Pine Nut Shells

2019 ◽  
Vol 11 (2) ◽  
pp. 37
Author(s):  
S. Batbileg ◽  
B. Purevsuren ◽  
M. Battsetseg ◽  
A. Ankhtuya ◽  
D. Batkhishig
Keyword(s):  
Chemical Composition ◽  
Elemental Composition ◽  
Chemical Elements ◽  
Heating Temperature ◽  
Sem Analysis ◽  
Pine Nut ◽  
Pyrolysis Tar ◽  
Phosphorus Iron ◽  
First Time

Have been determined the technical characteristics and elemental composition of shells. The elemental composition of the shell was determined by a microanalytical method such as 5Е С2000 model CNH-analyzer. The pyrolysis of shells investigated by using a standard quartz retort (tube) at different heating temperatures and determined the yields of pyrolysis products such as hard residue, tar, pyrolytic water, and gas. As a result of these experiments have been determined that 30% hard residue, higher yield 13% of tar, can be obtained at heating temperature 500oC. Thermogravimetric analysis of shells carried out in TG/DTA7200, Hitachi, Japan model equipment. The shells’ ash chemical composition was first time determined by the X-ray diffractions powder, that it consists of significantly higher 40% these chemical elements including manganese, nickel, little zinc, sulfur, aluminum, phosphorus, iron, magnesium, and calcium. The solubility of purified pyrolysis tar of shells in hexane, benzene and dichloromethane were investigated by using silicagel column and the chemical composition of each fraction determined by using of GC/MS chromatography system. The FTIR spectra of shell and pyrolysis tar determined by using of a Nicolet 20-PC spectrometer. The porosity structure of activated pyrolysis hard residue determined by the SEM analysis.

Eggshell MembraneBased Turmeric Extract Loaded Orally Disintegrating Films

2021 ◽  
Vol 18 ◽  
Author(s):  
Merve Deniz Köse ◽  
Nazlı Ungun ◽  
Oguz Bayraktar
Keyword(s):  
Drug Delivery ◽  
Sem Analysis ◽  
Eggshell Membrane ◽  
Casting Method ◽  
Drug Candidates ◽  
Turmeric Extract ◽  
Novel Drug ◽  
First Time ◽  
Low Solubility

Background: The increasing interest in using natural bioactive compounds as new drug candidates and their low solubility led to designing and developing novel drug delivery systems. Out of those, orally disintegrating films (ODFs) are a very eminent drug delivery system among pediatrics and geriatrics. Objective: In our study, the solvent casting method was used to prepare eggshell membrane-based and turmeric extract loaded orally disintegrating films. Method: Characterization of the prepared films was done with FTIR, AFM, and SEM analysis. The release profile of the turmeric extract was determined and fitted to the mathematical models. Results: AFM results showed that the best interaction between components was achieved in Film-2. The highest cumulative release percentage was obtained for the film with 7.5 % (w/w) turmeric extract (Film-2) as 41.98% based on the HPLC measurements. The Higuchi model was the best-fitted model for Film-2. Conclusion: In this study, SEP and CMCH were used for the first time as biopolymers to prepare the orally disintegrating film. Turmeric extract was successfully integrated into films prepared from SEP and CMCH.

scholarly journals Comprehensive Profiling of Microbiologically Induced CaCO3 Precipitation by Ureolytic Bacillus Isolates from Alkaline Soils

2021 ◽  
Vol 9 (8) ◽  
pp. 1691
Author(s):  
Olja Šovljanski ◽  
Lato Pezo ◽  
Jovana Stanojev ◽  
Branimir Bajac ◽  
Sabina Kovač ◽  
...  
Keyword(s):  
Selection Procedure ◽  
Kinetic Studies ◽  
Sem Analysis ◽  
Ion Concentration ◽  
Process Efficiency ◽  
Alkaline Soils ◽  
Score Analysis ◽  
Calcium Ion Concentration ◽  
First Time

Microbiologically induced CaCO3 precipitation (MICP) is a well-known bio-based solution with application in environmental, geotechnical, and civil engineering. The significance of the MICP has increased explorations of process efficiency and specificity via natural bacterial isolates. In this study, comprehensive profiling of five soil ureolytic Bacillus strains was performed through a newly formed procedure that involved six steps from selection and identification, through kinetic study, to the characterization of the obtained precipitates, for the first time. To shorten the whole selection procedure of 43 bioagents with the MICP potential, Standard Score Analysis was performed and five selected bacteria were identified as Bacillus muralis, B. lentus, B. simplex, B. firmus, and B. licheniformis by the MALDI-TOF mass spectrometry. Despite following the targeted activity, kinetic studies were included important aspects of ureolysis and the MICP such as cell concentration, pH profiling, and reduction in calcium ion concentration. At the final step, characterization of the obtained precipitates was performed using FTIR, XRD, Raman, DTA/TGA, and SEM analysis. Although all tested strains showed significant potential in terms of precipitation of calcite or calcite and vaterite phase, the main differences in the MICP behavior can be observed at the bacterial strain level. B. licheniformis showed favorable behavior compared to the reference Sporosarcina pasteurii DSM 33.

TBE in Sweden

2020 ◽  
Keyword(s):  
Genetic Characterization ◽  
Immunoglobulin M ◽  
Enzyme Linked Immunosorbent Assay ◽  
Second Phase ◽  
Serum Samples ◽  
Tick Borne Encephalitis ◽  
Specific Immunoglobulin ◽  
Tick Borne Encephalitis Virus ◽  
First Time

Tick-borne encephalitis virus (TBEV) was isolated for the first time in Sweden in 1958 (from ticks and from 1 tick-borne encephalitis [TBE] patient).1 In 2003, Haglund and colleagues reported the isolation and antigenic and genetic characterization of 14 TBEV strains from Swedish patients (samples collected 1991–1994).2 The first serum sample, from which TBEV was isolated, was obtained 2–10 days after onset of disease and found to be negative for anti-TBEV immunoglobulin M (IgM) by enzyme-linked immunosorbent assay (ELISA), whereas TBEV-specific IgM (and TBEV-specific immunoglobulin G/cerebrospinal fluid [IgG/CSF] activity) was demonstrated in later serum samples taken during the second phase of the disease.

Chemical Constituents and Antibacterial Activity of Cissus Aralioides.

2020 ◽  
Vol 17 ◽  
Author(s):  
Balogun Olaoye Solomon ◽  
Ajayi Olukayode Solomon ◽  
Owolabi Temitayo Abidemi ◽  
Oladimeji Abdulkarbir Oladele ◽  
Liu Zhiqiang
Keyword(s):  
Plant Extract ◽  
Chemical Constituents ◽  
Ethyl Acetate Fraction ◽  
Antibacterial Activities ◽  
Sub Saharan Africa ◽  
Chromatographic Purification ◽  
Whole Plant ◽  
Sub Saharan ◽  
First Time

: Cissus aralioides is a medicinal plant used in sub-Saharan Africa for treatment of infectious diseases; however the chemical constituents of the plant have not been investigated. Thus, in this study, attempt was made at identifying predominant phytochemical constituents of the plant through chromatographic purification and silylation of the plant extract, and subsequent characterization using spectroscopic and GC-MS techniques. The minimum inhibitory concentration (MICs) for the antibacterial activities of the plant extract, chromatographic fractions and isolated compounds were also examined. Chromatographic purification of the ethyl acetate fraction from the whole plant afforded three compounds: β-sitosterol (1), stigmasterol (2) and friedelin (3). The phytosterols (1 and 2) were obtained together as a mixture. The GC-MS analysis of silylated extract indicated alcohols, fatty acids and sugars as predominant classes, with composition of 24.62, 36.90 and 26.52% respectively. Results of MICs indicated that friedelin and other chromatographic fractions had values (0.0626-1.0 mg/mL) comparable with the standard antibiotics used. Characterization of natural products from C. aralioides is being reported for the first time in this study.

Green Synthesis and Spectroscopic Studies of Ag-rGO Nanocomposites for Highly Selective Mercury (II) Sensing

2018 ◽  
Vol 9 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Shubhangi J. Mane-Gavade ◽  
Sandip R. Sabale ◽  
Xiao-Ying Yu ◽  
Gurunath H. Nikam ◽  
Bhaskar V. Tamhankar
Keyword(s):  
Green Synthesis ◽  
Color Change ◽  
Limit Of Detection ◽  
Aqueous Media ◽  
Suitable Condition ◽  
Cost Effective ◽  
Spectroscopic Studies ◽  
Calibration Plot ◽  
First Time

Introduction: Herein we report the green synthesis and characterization of silverreduced graphene oxide nanocomposites (Ag-rGO) using Acacia nilotica gum for the first time. Experimental: We demonstrate the Hg2+ ions sensing ability of the Ag-rGO nanocomposites form aqueous medium. The developed colorimetric sensor method is simple, fast and selective for the detection of Hg2+ ions in aqueous media in presence of other associated ions. A significant color change was noticed with naked eye upon Hg2+ addition. The color change was not observed for cations including Sr2+, Ni2+, Cd2+, Pb2+, Mg2+, Ca2+, Fe2+, Ba2+ and Mn2+indicating that only Hg2+ shows a strong interaction with Ag-rGO nanocomposites. Under the most suitable condition, the calibration plot (A0-A) against concentration of Hg2+ was linear in the range of 0.1-1.0 ppm with a correlation coefficient (R2) value 0.9998. Results & Conclusion The concentration of Hg2+ was quantitatively determined with the Limit of Detection (LOD) of 0.85 ppm. Also, this method shows excellent selectivity towards Hg2+ over nine other cations tested. Moreover, the method offers a new cost effective, rapid and simple approach for the detection of Hg2+ in water samples.

scholarly journals Waste-Based One-Part Alkali Activated Materials

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2911
Author(s):  
Margarida Gonçalves ◽  
Inês Silveirinha Vilarinho ◽  
Marinélia Capela ◽  
Ana Caetano ◽  
Rui Miguel Novais ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Microstructural Analysis ◽  
Construction Materials ◽  
Sodium Metasilicate ◽  
High Compressive Strength ◽  
Hardened State ◽  
First Time ◽  
Furnace Slag ◽  
Alkali Activated

Ordinary Portland Cement is the most widely used binder in the construction sector; however, a very high carbon footprint is associated with its production process. Consequently, more sustainable alternative construction materials are being investigated, namely, one-part alkali activated materials (AAMs). In this work, waste-based one-part AAMs binders were developed using only a blast furnace slag, as the solid precursor, and sodium metasilicate, as the solid activator. For the first time, mortars in which the commercial sand was replaced by two exhausted sands from biomass boilers (CA and CT) were developed. Firstly, the characterization of the slag and sands (aggregates) was performed. After, the AAMs fresh and hardened state properties were evaluated, being the characterization complemented by FTIR and microstructural analysis. The binder and the mortars prepared with commercial sand presented high compressive strength values after 28 days of curing-56 MPa and 79 MPa, respectively. The mortars developed with exhausted sands exhibit outstanding compressive strength values, 86 and 70 MPa for CT and CA, respectively, and the other material’s properties were not affected. Consequently, this work proved that high compressive strength waste-based one-part AAMs mortars can be produced and that it is feasible to use another waste as aggregate in the mortar’s formulations: the exhausted sands from biomass boilers.

scholarly journals Isolation and characterization of a new cold-active protease from psychrotrophic bacteria of Western Himalayan glacial soil

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Saleem Farooq ◽  
Ruqeya Nazir ◽  
Shabir Ahmad Ganai ◽  
Bashir Ahmad Ganai
Keyword(s):  
Specific Activity ◽  
Temperature Range ◽  
Psychrotrophic Bacteria ◽  
Isolation And Characterization ◽  
Cold Active ◽  
Active Protease ◽  
Quantitative Screening ◽  
First Time ◽  
Low K

AbstractAs an approach to the exploration of cold-active enzymes, in this study, we isolated a cold-active protease produced by psychrotrophic bacteria from glacial soils of Thajwas Glacier, Himalayas. The isolated strain BO1, identified as Bacillus pumilus, grew well within a temperature range of 4–30 °C. After its qualitative and quantitative screening, the cold-active protease (Apr-BO1) was purified. The Apr-BO1 had a molecular mass of 38 kDa and showed maximum (37.02 U/mg) specific activity at 20 °C, with casein as substrate. It was stable and active between the temperature range of 5–35 °C and pH 6.0–12.0, with an optimum temperature of 20 °C at pH 9.0. The Apr-BO1 had low Km value of 1.0 mg/ml and Vmax 10.0 µmol/ml/min. Moreover, it displayed better tolerance to organic solvents, surfactants, metal ions and reducing agents than most alkaline proteases. The results exhibited that it effectively removed the stains even in a cold wash and could be considered a decent detergent additive. Furthermore, through protein modelling, the structure of this protease was generated from template, subtilisin E of Bacillus subtilis (PDB ID: 3WHI), and different methods checked its quality. For the first time, this study reported the protein sequence for psychrotrophic Apr-BO1 and brought forth its novelty among other cold-active proteases.

scholarly journals Synthesis and Characterization of Exopolysaccharide Encapsulated PCL/Gelatin Skin Substitute for Full-Thickness Wound Regeneration

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 854
Author(s):  
Ahmad Hivechi ◽  
Peiman Brouki Milan ◽  
Khashayar Modabberi ◽  
Moein Amoupour ◽  
Kaveh Ebrahimzadeh ◽  
...  
Keyword(s):  
Cell Activity ◽  
Average Diameter ◽  
Skin Substitute ◽  
Full Thickness ◽  
Skin Integrity ◽  
Hematoxylin And Eosin ◽  
First Time ◽  
Full Thickness Wound

Loss of skin integrity can lead to serious problems and even death. In this study, for the first time, the effect of exopolysaccharide (EPS) produced by cold-adapted yeast R. mucilaginosa sp. GUMS16 on a full-thickness wound in rats was evaluated. The GUMS16 strain’s EPS was precipitated by adding cold ethanol and then lyophilized. Afterward, the EPS with polycaprolactone (PCL) and gelatin was fabricated into nanofibers with two single-needle and double-needle procedures. The rats’ full-thickness wounds were treated with nanofibers and Hematoxylin and eosin (H&E) and Masson’s Trichrome staining was done for studying the wound healing in rats. Obtained results from SEM, DLS, FTIR, and TGA showed that EPS has a carbohydrate chemical structure with an average diameter of 40 nm. Cell viability assessments showed that the 2% EPS loaded sample exhibits the highest cell activity. Moreover, in vivo implantation of nanofiber webs on the full-thickness wound on rat models displayed a faster healing rate when EPS was loaded into a nanofiber. These results suggest that the produced EPS can be used for skin tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document