Effect of foaming agent, foam stabilizer and whipping time on drying process of tomato paste under different drying equipment

2017 ◽  
Vol 08 (02) ◽  
pp. 1740004 ◽  
Author(s):  
Adesoji Matthew Olaniyan ◽  
John Adeyemi Adeoti ◽  
Musiliu Olusola Sunmonu
Keyword(s):  
Moisture Content ◽  
Block Design ◽  
Methyl Cellulose ◽  
Microwave Oven ◽  
Drying Rate ◽  
Foaming Agent ◽  
Foam Stabilizer ◽  
Four Levels ◽  
Tomato Powder

Laboratory experiments were conducted to determine the effect of foaming agent (egg white (EW)), foam stabilizer (carboxyl methyl cellulose (CMC)) and whipping time on drying rate and quality of tomato (Lycopersicon esculentus) paste dried under air oven, microwave oven and mechanical dryer. A 43 factorial experiment in Randomized Complete Block Design (RCBD) was used to study the effect of four levels each of foaming agent (5%, 10%, 15% and 20%EW), foam stabilizer (0.15%, 0.30%, 0.45% and 0.60%CMC) and whipping time (3, 5, 7 and 9[Formula: see text]min) on the drying rate and the quality of foam-mat dried tomato powder in the three drying equipment. Each trial was performed in triplicates making a total number of 576 samples that were individually tested and measured. 25[Formula: see text]g sample of the paste was dried to a moisture content of 7.60% (wb) for 8[Formula: see text]h in mechanical dryer and oven dryer at temperatures of 55[Formula: see text]C and 50[Formula: see text]C, respectively, and 10[Formula: see text]min in microwave oven at 540[Formula: see text]W. Data obtained from the experiments were statistically analyzed using the analysis of variance (ANOVA) while the Duncan’s Multiple Range Test was used to compare the means. Results showed that the drying rate increased with increase in foaming agent, foam stabilizer and whipping with minimum values of 9.21[Formula: see text]g/h obtained in mechanical dryer, 9.31[Formula: see text]g/h in air oven and 8.05[Formula: see text]g/h in microwave oven. Increase in foaming agent, foam stabilizer and whipping time did not cause any adverse effect on vitamin C, ash, protein, fat, carbohydrate, crude fiber contents of the samples. Samples reached a stable moisture content of 7.60% (wb) in less than 8[Formula: see text]h in mechanical dryer and air and less than 10[Formula: see text]min in microwave oven. The results of the study showed that EW, CMC and whipping time influenced the drying rate and quality of foam-mat dried tomato powder.

scholarly journals PENGARUH PREPARASI DAN BLANCHING TERHADAP MUTU REBUNG IKAN TERFERMENTASI (LEMEA) [The Effect of Preparation and Blanching to Quality of Fermented Bamboo Shoots and Fish (Lemea)]

2019 ◽  
Vol 24 (1) ◽  
pp. 39
Author(s):  
Ahmad Sapta Zuidar ◽  
Samsul Rizal ◽  
Jessica Puteri Octavia Hadi
Keyword(s):  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Moisture Content ◽  
Block Design ◽  
Sensory Characteristics ◽  
Total Volatile ◽  
Overall Acceptability ◽  
Bamboo Shoots ◽  
Four Levels

Quality is one of the important factors in producing lemea - a fermented bamboo shoots and fish. Objectives of this research were to find out effects of preparation and their interaction to produce the best quality of lamea. This research used randomized complete block design with two factors and three replications. The first factor was preparations (P) consisting of four levels, namely preparation by smoothing and stirring (P1), preparation by cutting and stirring (P2), preparation by smoothing and coating (P3), and preparation by cutting and coating (P4). The second factor was blanching (B) consisting of two levels, namely without blanching (B0) and blanching (B1). In order to determine its quality, lemea was observed for its content of lactic acid bacteria, total volatile nitrogen, moisture content, and protein content as well as its sensory characteristics (color, aroma, texture, and overall acceptability scores). Collected data were analysed for its variances and the results showed that preparation and blanching treatments significantly affected lemea’s total volatile nitrogen and sensory characteristics.  The best lemea quality was obtained from combination treatment of blanching with chopped and stirred preparation (B1P2). The lemea had lactic acid bacteria of 10.1160 log cfu/g, total volatile nitrogen of 43.14 mg/100g, moisture content of 87.99% (b/v), color score of 4.34 (yellowish white), aroma score of 3.78 (rot), texture score of 4.53 (soft) and overall acceptance score of 3.90 (likes).

scholarly journals Growth performance and wood quality of white jabon (Neolamarckia cadamba) progeny testing at Parung Panjang, Bogor, Indonesia

2019 ◽  
Vol 20 (8) ◽  
Author(s):  
Nurul Chaerani ◽  
DEDE J SUDRAJAT ◽  
ISKANDAR Z SIREGAR ◽  
ULFAH J SIREGAR
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Growth Performance ◽  
Wood Density ◽  
Block Design ◽  
Wood Quality ◽  
Basic Density ◽  
Progeny Testing ◽  
Pilodyn Penetration

Abstract. Chaerani N, Sudrajat DJ, Siregar IZ, Siregar UJ. 2019. Growth performance and wood quality of white jabon (Neolamarckia cadamba) progeny testing at Parung Panjang, Bogor, Indonesia. Biodiversitas 20: 2295-2301. The aim of this study was to evaluate the genetic parameters of growth and wood quality in white jabon progeny test at 54 months old in Parung Panjang, Bogor. The 105 half-sib families obtained from 12 provenances were evaluated in a randomized complete block design with five replications. Wood quality was assessed both in a non-destructive way using a pilodyn and by destructive method using wood sample taker. Results indicated that the mean value ranged from 5.10 to 10.15 m for height, 6.67 to 15.30 cm for diameter, 2.30 to 3.62 cm for pilodyn penetration, 0.66 to 0.82 g/cm3 for wood density, 0.33 to 0.50 for specific gravity, and 66 to 111 % for moisture content, respectively. There were significant differences among 105 families for all traits except moisture content. The high heritability estimate was found for height (0.4-0.69) and basic density (0.27-0.59). Applying 80% selection intensity on diameter and leaving 84 best families in each block will produce a high total genetic gain. Pilodyn penetration had negative correlation with diameter, wood density, and specific gravity.

scholarly journals Effect of foaming agent concentration and drying temperature on biochemical properties of foam mat dried tomato powder

Food Research ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 291-297
Author(s):  
M.A. Hossain ◽  
S. Mitra ◽  
M. Belal ◽  
W. Zzaman
Keyword(s):  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Titratable Acidity ◽  
Biochemical Properties ◽  
Drying Time ◽  
Foaming Agent ◽  
Egg Albumin ◽  
Foam Stabilizer ◽  
Tomato Powder ◽  
Β Carotene

The purpose of the study was to optimize the effective drying conditions and different foaming agent concentrations on the biochemical properties of foam mat dried tomato powder. Foaming was achieved by using egg albumin as foaming agent and sodium salt of Carboxymethyl Cellulose (CMC) as foam stabilizer with different concentrations. Drying was achieved by using different drying temperatures. The changes in different physicochemical properties of foam mat dried powder viz. total soluble solid (TSS), pH, ascorbic acid, titratable acidity, β-Carotene, DPPH radical scavenging activity were observed. Foams were prepared from different concentrations of egg albumin (3-7% w/w) and sodium salt of Carboxymethyl Cellulose (1%, 0.5%). The drying temperatures were varied from 60°C to 70°C. The drying time changes with different drying temperatures. It was found that the drying time decreased with the increased foaming agent concentrations as well as with higher drying temperature. It takes almost 13 hrs for drying at 70°C. TSS and pH content was increased with the increase of foaming agent concentrations and foam stabilizer’s concentrations but decreased with the increasing temperatures. Ascorbic acid decreased with the increase of foaming agent concentrations and temperatures but increased with CMC concentration. Titratable acidity content of foam mat dried tomato powder was decreased with the increasing foaming agent concentrations but increased with the higher temperatures and decreased CMC concentration. β-Carotene contents increased with the increase of foaming agent concentrations but decreased with the increase of temperatures and foam stabilizer concentration. DPPH free radical scavenging activity increased with the increase of foaming agent, foam stabilizer and temperatures. Based on the maximum retention of physicochemical properties, the optimum treatment of foaming agent was found to be 7% egg white + 1% CMC at 60°C.

scholarly journals PENGARUH PERBEDAAN BAHAN PENYAMAK TERHADAP KUALITAS KULIT IKAN PARI MONDOL (Himantura gerrardi) TERSAMAK The Effect of Different Tanning Materials towards Leather Quality of Tanned Mondol Stingray (Himantura gerrardi)

2016 ◽  
Vol 11 (2) ◽  
pp. 140
Author(s):  
Tika Kusmaryanti ◽  
Ratna Ibrahim ◽  
Putut Har Riyadi
Keyword(s):  
Tensile Strength ◽  
Moisture Content ◽  
Ph Value ◽  
Block Design ◽  
Shrinkage Temperature ◽  
Quality Requirements ◽  
Tear Strength ◽  
Randomized Block Design ◽  
Significant Difference

ABSTRAK   Usaha penyamakan kulit ikan Pari umumnya dilakukan oleh usaha kecil menengah dan hanya menggunakan metode aldehid dengan bahan samak formalin, Selain itu juga belum diketahui kualitas kulit ikan Pari Mondol tersamak yang menggunakan bahan samak krom. Penelitian ini bertujuan untuk mengetahui pengaruh perbedaan penggunaan jenis bahan penyamak terhadap kualitas fisik dan kimiawi kulit ikan Pari Mondol tersamak. Materi penelitian berupa kulit ikan Pari Mondol (Himantura gerrardi) dan bahan samak. Penelitian dilakukan dengan metode eksperimental laboratoris. Rancangan percobaan yang digunakan adalah Rancangan Acak Kelompok dengan perlakuan bahan samak yang berbeda, yaitu formalin, krom, dan kombinasi. Masing-masing perlakuan diulang tiga kali. Variabel mutu yang diamati adalah kekuatan tarik, kemuluran, kekuatan sobek, ketebalan, suhu kerut, ketahanan bengkuk (bengkok), pH dan kadar air. Data dianalisis menggunakan ANOVA dan perbedaan diantara perlakuan diuji dengan Uji Tukey. Hasil penelitian menunjukkan bahwa perbedaan bahan penyamak menyebabkan pengaruh nyata terhadap nilai kekuatan tarik, kekuatan sobek dan ketebalan tetapi tidak memberikan pengaruh nyata terhadap nilai pH, kadar air dan ketahanan bengkuk. Produk yang terbaik yaitu kulit ikan Pari Mondol yang disamak dengan bahan samak kombinasi antara krom dan mimosa, yang sebagian persyaratan mutunya sudah memenuhi persyaratan mutu kulit ikan Pari tersamak menurut SNI 06-6121-1999.   Kata kunci: Kualitas, kulit Ikan Pari, penyamak     ABSTRACT  Meanwhile the quality of Stingray tanned leather which using chrome tannin materials was not yet known. This research aims to determine the effect of different types used tannin materials towards physical and chemical quality of Stingray leather quality. The materials used in this research isStingray (Himantura gerrardi) skin and tannin materials. The study was conducted with laboratory experimental method. The experiments was designed according to the Randomized Block Design with different tanning materials (formalin, chrome, and chrome-combination). Each treatment was done with in triplicate. The quality variables that measured were tensile strength, elongation, tear strength, thickness, shrinkage temperature, bent resistance, pH and moisture content. Data were analyzed using Analysis of Variance. To find the difference between treatments, the data were tested with Honestly Significant Difference Test . The results showed that various of tannin materials gave significant effects to the values of tensile strength, tear strength and thickness however there was not any significant effect on bent resistance, moisture content and pH value. The best product were Stingray tanned leather with chrome-combination tannin material, which partially quality requirements has been comply with Stingray tanned leather quality requirements according to SNI. Keywords: Quality, stingray skin, tanning

scholarly journals EFFECT OF STORAGE MATERIALS ON THE PROXIMATE COMPOSITION OF TOMATO (Lycopersicon Esculentum) POWDER

2020 ◽  
Vol 4 (2) ◽  
pp. 203-206
Author(s):  
RUKAYAT OLADIPUPO ◽  
K. A. Yusuf ◽  
G. Salawu
Keyword(s):  
Vitamin C ◽  
Moisture Content ◽  
Crude Protein ◽  
Storage Period ◽  
Proximate Analysis ◽  
Aluminium Foil ◽  
Crude Fibre ◽  
Storage Materials ◽  
Tomato Powder

The effect of storage materials on the quality of tomato powder was studied. Fresh, firm and matured red tomatoes were washed, sorted and sliced to a uniform thickness of 5mm. The sliced tomatoes were pre-treated by dipping in 1% calcium chloride (CaCl2) and 0.2% potassium metabislphite (KMS) solution for 10 minutes at room temperature. 200g each of the sample was dried at temperatures of 600C until equilibrium moisture content was attained. The dried tomatoes were ground into powder and stored in Black polyethylene [BPE], White polyethylene [WPE], and Laminated Aluminium Foil [LAF] pouches for 6 weeks. The moisture content, crude protein, crude fibre, fat, total ash, and vitamin C of the tomato powder were determined using the method prescribed by AOAC. The carotene contents were determined by HPLC. The proximate analysis was repeated after 2 weeks, 4 weeks and 6weeks of storage.  There was an increase in moisture content and ash content after 6 weeks of storage while a decrease in value of protein, fat and vitamin C content occurred after the storage period. All the parameters measured were best retained by the laminated aluminium foil (LAF) compared to black polyethylene (BPE) and white polyethylene (WPE) packaging material for the entire period of the study.

scholarly journals Effects of moisture content, loading rate, and grain orientation on fracture resistance of barley grain

2009 ◽  
Vol 55 (No. 3) ◽  
pp. 85-93 ◽  
Author(s):  
H. Tavakoli ◽  
S.S. Mohtasebi ◽  
A. Rajabipour ◽  
M. Tavakoli
Keyword(s):  
Moisture Content ◽  
Fracture Resistance ◽  
Block Design ◽  
Barley Grain ◽  
Deformation Curves ◽  
Horizontal Orientation ◽  
Proper Design ◽  
Four Levels ◽  
Barley Grains ◽  
Agricultural Materials

Force and deformation curves of agricultural materials must be provided for the proper design of harvesting and processing machineries. In this research, the fracture resistance of barley grain was measured in terms of the grain rupture force and energy. In this study, 8 treatments were performed as a randomised complete block design with 10 replications. The barley grains were quasi-statically loaded in horizontal and vertical orientations with the moisture content at four levels: 7.34, 12.11, 16.82, and 21.58% dry basis, and loading rates at two levels: 5 and 10 mm/min. Based on the results obtained, the force required for initiating the grain rupture decreased from 161.97 to 93.94 N, and from 75.37 to 50.16 N, and the energy absorbed at the grain rupture increased from 36.42 to 74.70 mJ and from 27.34 to 62.65 mJ, for horizontal and vertical orientations, respectively, with the increase in the moisture content from 7.34 to 21.58% dry basis. This showed that seeds are more flexible in the horizontal orientation.

scholarly journals Effects of Pre-drying Chemical Treatments on Quality of Cabinet Dried Tomato Powder

2012 ◽  
Vol 5 (1) ◽  
pp. 253-265 ◽  
Author(s):  
NHMR Mozumder ◽  
MA Rahman ◽  
MS Kamal ◽  
AKM Mustafa ◽  
MS Rahman
Keyword(s):  
Vitamin C ◽  
Moisture Content ◽  
Sensory Analysis ◽  
Total Sugar ◽  
Overall Acceptability ◽  
Chemical Treatments ◽  
Potassium Metabisulphite ◽  
Significant Difference ◽  
Tomato Powder

The focus of this research was to analyze the yield, physico-chemical and nutritional quality of a cabinet dried tomato powder as affected by three (3) chemical treatments (KMS, CaCl2 and both). Dehydration process was carried out using a cabinet dryer at a constant air flow velocity of 0.7 m/s and air temperature in the range of 60-65oC based on preliminary tests by dipping in 0.2% (w/w) potassium metabisulphite (T1) and 1% (w/w) calcium chloride (T2) independently and 1% (w/w) calcium chloride (CaCl2) along with 0.2% (w/w) potassium metabisulphite (KMS) in water solution (T3) for 10 minutes. The effect of 3 pre-drying treatments on quality of cabinet dried tomato powder was analyzed by determining moisture content, rehydration ratio, total sugar, total acidity, fat, protein, ash, crude fiber, pH, total caroteniods, vitamin-C, minerals (calcium, iron, phosphorus) and sensory analysis. The results expressed that the treatment T3 achieved the highest yield of tomato powder (4.6 g/100 g). The control sample showed highest moisture content (6.9 g/100 g) and dipping in 1% CaCl2 along with 0.2% KMS presented the lowest moisture content (5.9 g/100 g). Sample T3 showed highest total sugar content (49.1 g/100 g). The study also depicted that the total carotenoids content in tomato powder was 0.21 mg/100 g which was lower than that of fresh tomato (2.1 mg/100 g). Micronutrients such as vitamin-C, Calcium, phosphorus and iron were found to be 35.30 mg/100 g, 336.72 mg/100 g, 105 mg/100g and 12.23 mg/100 g, respectively in case for T3 sample. Sensory analysis (color, texture, flavor and overall acceptability) of tomato powder was carried out by trained and untrained panelists and their interpretation was done by using statistical ANOVA Test. There was no significant difference between control and treated samples regarding to their texture, flavor and overall acceptability but significant difference was observed in case of color. DOI: http://dx.doi.org/10.3329/jesnr.v5i1.11590 J. Environ. Sci. & Natural Resources, 5(1): 253-265, 2012

scholarly journals Effect of Fermentation Time and Cassava Varieties on Water Content and the Yield of Starch from Modified Cassava Flour (MOCAF)

2018 ◽  
Vol 5 (2) ◽  
pp. 71 ◽  
Author(s):  
Nurud Diniyah ◽  
Achmad Subagio ◽  
Riri Nur Lutfian Sari ◽  
Pradiska Gita Vindy ◽  
Alif Ainur Rofiah
Keyword(s):  
Moisture Content ◽  
Block Design ◽  
Food Product ◽  
Average Moisture Content ◽  
Fermentation Time ◽  
Cassava Flour ◽  
Randomized Block Design ◽  
Cassava Varieties

MOCAF (modified cassava flour) is a high potential food product. This product can be used to replace wheat flour in the manufacture of various food products. However, there is no characterization of starch properties of MOCAF. The efforts to improve the quality of starch from cassava starch by fermentation process using a combination of enzymes and microbes  from Lactic acid bacteria.The purpose of this research is to determine the influence of fermentation time to yield and moisture content. Single factor randomized block design with 3 (three) levels i.e fermentation time (0, 12, and 24 hours) with two group namely varieties of cassava Cimanggu and Kaspro. Cimanggu and Kaspro cassava varieties were used to compare the properties of starch due to different fermentation time (0, 12 and 24 hours) with triplicate. The results showed the yield and moisture content were affected by fermentation time. Average moisture content ranged from 13.3 to 13.8% with the starch yield is 38-59%. Application of starch MOCAF can be used for food, cosmetics, and medicines industry.Keywords : modified starch, cassava, fermentation, yield

scholarly journals STUDI PEMBUATAN PERMEN JELLY DARI KOMBINASI NANAS (Ananas comosus L.) DAN JERUK SAMBAL (Citrus microcarpa)

Pro Food ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 749
Author(s):  
Eva Mayasari ◽  
Tri Rahayuni ◽  
Nurul Erfiana
Keyword(s):  
Vitamin C ◽  
Moisture Content ◽  
Block Design ◽  
Food Product ◽  
Ash Content ◽  
National Standard ◽  
Ananas Comosus ◽  
Average Score ◽  
Randomized Block Design

ABSTRACT   Jelly candy from combination of pineapple (Ananas comosus L.) and calamansi (Citrus microcarpa) is an alternative food product. The aim this study is to provide the best quality of jelly candy from the combination of pineapple and calamansi juices. This study used Randomized Block Design with one factor was combination of pineapple : calamansi consisting of 6 levels are 100:0%, 90:10%, 80:20%, 70:30%, 60:40%, 50:50%. Each treatment replicated 4 times therefore obtained  24 samples combination. The combination of 80% pineapple and 20% calamansi is the best treatment with a mean of moisture content 19,34%, ash content 0,30%, vitamin C 15,97mg/100G, total dissolved solids 24,500brix, pH 3,29, hardness level 0,05 kG force, the average score of the panelists preference the taste, appearance, and aroma has like (5,04), like (5,28), like (5,12), respectively. Moisture and ash content are in the levels of jelly candy qualify according to National Standard of Indonesia (SNI: 02-3547-2008), i.e., maximum moisture content of 20,0% and a maximum ash content of 3,0%.   Keywords: pineapple, calamansi, combination, jelly candy, fruit juice.   ABSTRAK   Permen jelly dari penambahan kombinasi nanas (Ananas comosus L.) dan jeruk sambal (Citrus microcarpa) merupakan salah satu alternatif produk pangan. Penelitian ini bertujuan untuk mendapatkan karakteristik terbaik permen jelly dari kombinasi sari buah nanas dan jeruk sambal. Penelitian ini menggunakan Rancangan Acak Kelompok (RAK) dengan 1 faktor perlakuan terdiri dari 6 taraf yaitu kombinasi sari buah nanas dan jeruk sambal terdiri dari 100:0%, 90:10%, 80:20%, 70:30%, 60:40%, 50:50%. Setiap perlakuan diulang sebanyak 4 kali sehingga diperoleh 24 sampel kombinasi. Kombinasi 80% nanas dan 20% jeruk sambal merupakan perlakuan terbaik berdasakan kadar air sebesar 19,34%, kadar abu sebesar 0,30%, vitamin C sebesar 15,97 mG/100G, total padatan terlarut sebesar 24,500brix, pH sebesar 3,29, tingkat kekerasan sebesar 0,05 kG force. Rerata skor kesukaan panelis terhadap rasa, warna, dan aroma berturut-turut adalah menyukai (5,04), menyukai (5,28), menyukai (5,12). Kadar air dan kadar abu permen jelly yang dihasilkan memenuhi syarat mutu SNI 02-3547-2008, yaitu kadar air maksimal 20,0% dan kadar abu maksimal 3,0%.   Kata Kunci : nanas, jeruk sambal, kombinasi, permen jelly, sari buah.

scholarly journals Potential of microwave drying technology for increase drying rate and physical quality of kaffir lime (Citrus hystrix DC) leaves

2021 ◽  
Vol 924 (1) ◽  
pp. 012045
Author(s):  
F Su’aidah ◽  
I Taruna
Keyword(s):  
Moisture Content ◽  
Power Level ◽  
Preference Test ◽  
Color Difference ◽  
Microwave Drying ◽  
Drying Rate ◽  
Physical Quality ◽  
Oven Drying ◽  
Drying Rates

Abstract The effects of microwave power on microwave drying rates and the physical quality of kaffir lime leaves were studied. Three power levels were used in this study, high (723 watts), medium (537 watts), and low (420 watts). The moisture content, drying rate, color (L, a, b), and organoleptic parameters of each power level will be compared with the oven drying method (60°C). The result shows that the final moisture content of the high, medium, and low power of microwave drying are 6.06, 4.26%, and 6.16%db respectively, which is lower than oven drying, 16.62%db. Besides, the drying rate of microwave drying is 26.39-48.71%db/minute, higher than oven drying 0.32%db/minute. Dried kaffir lime leaves with medium level power (537 watt) has the lowest color difference (ΔE = 1.0 ± 0.29) compared to fresh leaves. While, the color and aromatic preference test dried kaffir lime leaves by microwave drying was preferable than oven drying.

Sign in / Sign up

Export Citation Format

Share Document