Voice In Ear

2021 ◽  
Vol 5 (1) ◽  
pp. 1-25
Author(s):  
Yang Gao ◽  
Yincheng Jin ◽  
Jagmohan Chauhan ◽  
Seokmin Choi ◽  
Jiyang Li ◽  
...  
Keyword(s):  
User Authentication ◽  
Low Cost ◽  
The Body ◽  
Ear Canal ◽  
Replay Attacks ◽  
Increasing Demand ◽  
The Right ◽  
Sound Conduction ◽  
Enrollment Data ◽  
Secure Authentication

With the rapid growth of wearable computing and increasing demand for mobile authentication scenarios, voiceprint-based authentication has become one of the prevalent technologies and has already presented tremendous potentials to the public. However, it is vulnerable to voice spoofing attacks (e.g., replay attacks and synthetic voice attacks). To address this threat, we propose a new biometric authentication approach, named EarPrint, which aims to extend voiceprint and build a hidden and secure user authentication scheme on earphones. EarPrint builds on the speaking-induced body sound transmission from the throat to the ear canal, i.e., different users will have different body sound conduction patterns on both sides of ears. As the first exploratory study, extensive experiments on 23 subjects show the EarPrint is robust against ambient noises and body motions. EarPrint achieves an Equal Error Rate (EER) of 3.64% with 75 seconds enrollment data. We also evaluate the resilience of EarPrint against replay attacks. A major contribution of EarPrint is that it leverages two-level uniqueness, including the body sound conduction from the throat to the ear canal and the body asymmetry between the left and the right ears, taking advantage of earphones' paring form-factor. Compared with other mobile and wearable biometric modalities, EarPrint is a low-cost, accurate, and secure authentication solution for earphone users.

Computer systems in microscopy: The big, the small and the ugly

1988 ◽  
Vol 46 ◽  
pp. 910-911
Author(s):  
Peter Rez
Keyword(s):  
Secondary Electron ◽  
Low Cost ◽  
Computer Systems ◽  
Bright Field ◽  
X Ray ◽  
Transmission Electron ◽  
Early Computer ◽  
Multichannel Analysis ◽  
Increasing Demand ◽  
The Right

The transmission electron microscope has now reached a stage of maturity such that the differences between different models are in the details rather than the fundamental design. Although the early computer systems in microscopy appeared only as adjuncts to X-ray multichannel analyzers newer, more powerful systems have become available at relatively low cost and there is an increasing demand for image acquisition, processing and analysis. There is still no agreement as to what is the right design for a microscope computer system. The answer depends not only on the planned applications but also on the organization of the microscopy lab.For spectroscopy there is a need to acquire spectra both by multichannel scaling (EELS) and multichannel analysis (EDX) and process the results for quantitative analysis. In imaging the requirement can be for either capture of TV camera images or direct scanning of a focussed probe across the specimen with digitization of an appropriate signal (bright field, secondary electron).

A First Room Temperature Stable and Jetable Solder Joint Encapsulant Adhesive

2011 ◽  
Vol 2011 (1) ◽  
pp. 000509-000515 ◽  
Author(s):  
Mary Liu ◽  
Wusheng Yin
Keyword(s):  
Solder Joint ◽  
High Speed ◽  
Room Temperature ◽  
Low Cost ◽  
White Paper ◽  
Solder Paste ◽  
Fine Pitch ◽  
Increasing Demand ◽  
The Right ◽  
Device Miniaturization

With the increasing demand of device miniaturization, high speed, more memory, more function, low cost, and more flexibility in device design and manufacturing chain, YINCAE has published a white paper on a first individual solder joint encapsulant which can eliminate underfilling process with at least five times solder joint increase and provide more flexibility for fine pitch and high density application. In order to meet the demand of manufacturing of high speed and low cost, YINCAE has invented a room temperature stable and jettable solder joint encapsulant adhesive – SMT 266. The invention of SMT 266 has allowed our customers to have more flexibility in their high-speed production line such as worry free on the work life of adhesive and workable jetting process. After being used in the customer field for a few years, the implementation of SMT266 has been approved improving the process yield, eliminating voids and cracks in solder joint, eliminating head-in-pillow issue for large component during lead free reflow process. The results from thermal cycling test indicated that the first failure cycles using SMT266 is high up to 6000 cycles, at least 4000 – 5000 cycles higher than other processes. The pull strength is 1.5 times higher than using solder paste plus underfilling process. All reliability data implied encapsulating each individual solder joint is the right direction to move toward. The enforcement mechanism will be discussed in our paper.

Fabrication of Small Size Inner Spiral Ribbed Copper Tube Using Tube Sinking Method

2013 ◽  
Vol 802 ◽  
pp. 37-41 ◽  
Author(s):  
Tanit Tangsri ◽  
Somchai Norasethasopon
Keyword(s):  
Low Cost ◽  
Production Method ◽  
High Heat ◽  
Width Ratio ◽  
Pitch Ratio ◽  
Increasing Demand ◽  
The Right ◽  
Spiral Angle ◽  
Distinguishing Features ◽  
Drawing Method

This research related to the development of ultra-small inner spiral ribbed copper tubes (ISRCT) which has the quality and the efficiency in transferring the high heat. So the demand of using ultra-small tubes in electrical appliances today is very high and will be greater in the future. The technology required must be the technology that can produce ultra-small ISRCT with various distinguishing features such as small size, high quality, high functionality and low cost of productions in order to fulfill the increasing demand. The conventional production method was suitable for large tubes which high draw ability, but unsuitable for the fabrication of long ultra-small tubes because it is difficult to manufacture the devices used as tools such as an ultra-small spiral ribbed mandrel and a floating plug. This research has proposed tube sinking drawing method and presented a comparison of seven parameters, including the drawing stress, wall thickness ratio, ribbed base width ratio, ribbed tip width ratio, ribbed height ratio, ribbed pitch ratio, and ribbed spiral angle ratio. The experiment was found that the tube sinking was possible for making the ultra-small ISRCT. The results showed the sum of a reduction in the right size in the case of ultra-small ISRCT. The most appropriate must not exceed 68.81% and will be reduced after draw formed to the 8th.

Design and Manufacturing of Portable Pressure Sensor for Measuring the Interface Pressure between the Body and (Orthosis or Socket Prosthesis)

2020 ◽  
Vol 45 ◽  
pp. 12-21
Author(s):  
Fahad Mohanad Kadhim ◽  
Salim Fattah Awad ◽  
Muhammad Safa Al-Din Tahir
Keyword(s):  
Measurement System ◽  
Pressure Measurement ◽  
Low Cost ◽  
Force Sensor ◽  
The Body ◽  
Sensor System ◽  
Interface Pressure ◽  
Lateral Instability ◽  
The Right ◽  
Pressure Measurement System

In this study, a sensor system was designed and manufactured to measure the interface pressure between the limbs and the orthosis or between the stump and the socket prosthesis. It is also used to determine the value and location of corrective forces when using orthosis to correct deformities in the limbs or spine. The sensor system consists of a force sensor mat (43.69 x 43.69 mm), Arduino, LCD monitor, and connecting cables. When comparing the device manufactured in this study with other devices, this device is characterized as lightweight, easy to move, low cost and gives instant pressure on the LCD screen. In this study, the interventional pressure measurement system was manufactured and programmed and compared to the F-Socket measurement system. The practical part was tested on a patient suffering from med-lateral instability in the ankle joint at the right leg. The interventional pressure between the leg and orthosis was measured in two ways at the regions (posterior, lateral, medial) .the first method using the pressure measurement system manufactured in this study and the second method by using the F-Socket device. The test results showed that the values ​​of pressure readings using the manufactured system are close to the values ​​of pressure readings obtained when using the F-Socket device. This indicates that the accuracy of the readings of the manufactured system and can be used for research purposes as well as in the process of placing pads in the appropriate place within the orthosis to correct the deformity or help to provide valuable information on the manufacturing, modification and fitting of prosthetic sockets. despite its simple structure and low cost as compared with F-Socket devise.

Our Bodies, Whose Property?

2013 ◽  
Author(s):  
Anne Phillips
Keyword(s):  
Labor Markets ◽  
Personal Autonomy ◽  
The Body ◽  
Body Parts ◽  
Complex Issue ◽  
Human Organs ◽  
Property Owners ◽  
The Common ◽  
The Difference ◽  
The Right

No one wants to be treated like an object, regarded as an item of property, or put up for sale. Yet many people frame personal autonomy in terms of self-ownership, representing themselves as property owners with the right to do as they wish with their bodies. Others do not use the language of property, but are similarly insistent on the rights of free individuals to decide for themselves whether to engage in commercial transactions for sex, reproduction, or organ sales. Drawing on analyses of rape, surrogacy, and markets in human organs, this book challenges notions of freedom based on ownership of our bodies and argues against the normalization of markets in bodily services and parts. The book explores the risks associated with metaphors of property and the reasons why the commodification of the body remains problematic. The book asks what is wrong with thinking of oneself as the owner of one's body? What is wrong with making our bodies available for rent or sale? What, if anything, is the difference between markets in sex, reproduction, or human body parts, and the other markets we commonly applaud? The book contends that body markets occupy the outer edges of a continuum that is, in some way, a feature of all labor markets. But it also emphasizes that we all have bodies, and considers the implications of this otherwise banal fact for equality. Bodies remind us of shared vulnerability, alerting us to the common experience of living as embodied beings in the same world. Examining the complex issue of body exceptionalism, the book demonstrates that treating the body as property makes human equality harder to comprehend.

ANALISIS YURIDIS NORMATIF PUTUSAN PERKARA MAHKAMAH AGUNG KONSTITUSI RI No. 004/PUU-II/2004

2013 ◽  
Vol 7 (1) ◽  
pp. 7
Author(s):  
Doni Budiono
Keyword(s):  
The Body ◽  
Supreme Courts ◽  
Military Justice ◽  
State Administration ◽  
The Supreme Court ◽  
Directorate General ◽  
The Government ◽  
Government Rules ◽  
The Right ◽  
Tax Court

The  authority  of justice in Indonesia  is executed by  the Supreme Courts and  the  justice  boards/body under the Supreme Courts, including  the general  justice, religious affairs justice, military justice,  state administration  justice,  and  the Constitution Court. According to  certainty in  the Act of  Tax Court, Article1, clause  (5),  tax  dispute   refers to the legal dispute arising in the  taxation  affairs between the  tax payer or the  body  responsible for the  tax with   the government   executives  ( Directorate General of Tax) as the consequence of   the issue of  the decree for the  appeal  to the Tax  Court in accordance with the  tax Act, including the  charge  against the  execution of collection   in accordance with the  Act of Tax Collection by force. The  formation of Tax Court is  designed by  the Executives, in this case, the  Department of Finance, specifically  the Directorate   General  of Tax  which has the right to issue  law  more technical about  tax accord to Article 14,  letter A,  President Decree  no. 44  year 1974,  concerning the  basic  organization of the Department.  Based on  it,  it  is clear that  in addition to execute the government  rules and policy,  this body  has to execute judicial   rules and policy. This is against the  principles of  Judicative  Power/Authority in Indonesia,  which   clearly states that this body  should be under the Supreme Court.   Therefore. It is suggested that   the Act  No UU no.14 Year 2012 concerning  Tax Court   be revised  in accordance with the system of  Power Division  of Justice  as  stated in 45 Constitutions.

Ayurveda dietary guidelines during Covid-19 Pandemic

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 1477-1481
Author(s):  
Ishwari Gaikwad ◽  
Priyanka Shelotkar
Keyword(s):  
Dietary Habits ◽  
Relevant Literature ◽  
Dietary Guidelines ◽  
The Body ◽  
Daily Regimen ◽  
Web Page ◽  
Healthy State ◽  
Health Disorders ◽  
The Individual ◽  
The Right

The current world situation is both frightening and alarming due to the massive disruption caused by the Covid-19 pandemic. The next few days are censorious as we need to be very precautious in our daily regimen as well as dietary habits. Ayurveda offers knowledge about food based on certain reasoning. Indecent food custom is the chief cause for the rising development of health disorders in the current era. In classical texts of Ayurveda, the concept of diet explained well, ranging from their natural sources, properties and specific utility in pathological as well as physiological manner. In this work, the review of the relevant literature of Ahara (Diet) was carried out from Charak Samhita and other texts, newspapers, articles, web page related to the same.  Every human being is unique with respect to his Prakriti (Physical and mental temperament), Agni (Digestive capacity), Koshtha  (Nature of bowel) etc. For that reason, the specificity of the individual should be kept in mind. Ahara, when consumed in the appropriate amount at the right moment following all Niyamas (Guidelines) given in Ayurveda texts, gives immunity and keeps the body in a healthy state during pandemics such as Covid-19. Ultimately, this will help the human body to maintain its strength for life. This article reviews the concept of diet viz. combination of foods, their quantity and quality, methods of preparation and processing, which are to be followed during pandemics and are essential in maintenance and endorsement of health and preclusion of diseases.

Immunity boosting diet during Covid 19

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 832-838
Author(s):  
Roshna Sukheoji Bhutada ◽  
Renu Rathi ◽  
Devyani Dasar
Keyword(s):  
Immune System ◽  
Food Studies ◽  
Egg Yolk ◽  
The Body ◽  
Leafy Vegetables ◽  
Green Leafy Vegetables ◽  
Custard Apple ◽  
The Right ◽  
Daily Physical Activities ◽  
Physiological Reactions

WHO declared Covid 19 /SARS -COV-2 as a global pandemic.Till date, there is no medicine for COVID-19. If the Infection arises in the body then the defence mechanism activated against infection. A recent study suggests that temporarily augmenting the body's immune system in the early stages of COVID-19 can help patient to avoid severe symptoms as it is rightly said prevention is better than cure. Ayurveda approaches to develop physiological reactions to facilitate immunity. Planning of diet is most important to boost immunity.As per many researches to provide supplementary food which contains Zinc, Vitamin C,Vitamin D and immunity boosting foodsuch as citrus natural products, custard apple, apple, papaya is among the Fruits. Vegetables include broccoli, onion, garlic and green leafy vegetables. Nuts, ginger, turmeric, pepper, egg yolk, shellfish, mushroom. The need of the hour is a quick boost to immune system to keep it fit, fighting. One should get the right amount of nutrients from the diet, supplementation regimen to boost immune system.In this review, there are few common supplements and super food studies have been included. It might be a torch bearer as sample menu and their alternatives are given for a normal adult. Needy may change contemplated according to age, sex, body mass index and daily physical activities.

Harnessing clay nano-particles for stem-cell driven tissue regeneration, EPSRC

Impact ◽  
2018 ◽  
Vol 2018 (3) ◽  
pp. 26-28
Author(s):  
Jonathan Dawson ◽  
Richard Oreffo
Keyword(s):  
Stem Cells ◽  
Stem Cell ◽  
Blood Vessels ◽  
The Body ◽  
Biological Molecules ◽  
Nano Particles ◽  
Clay Particles ◽  
Clay Nanoparticles ◽  
Signalling Molecules ◽  
The Right

Gels made from clay could provide an environment able to stimulate stem-cells due to their ability to bind biological molecules. That molecules stick to clay has been known by scientists since the 1960s. Doctors observed that absorption into the blood stream of certain drugs was severely reduced when patients were also receiving clay-based antacid or anti-diarrhoeal treatments. This curious phenomenon was realized to be due to binding of the drugs by clay particles. This interaction is now routinely harnessed in the design of tablets to carefully control the release and action of a drug. Dr Dawson now proposes to use this property of clay to create micro-environments that could stimulate stem cells to regenerate damaged tissues such as bone, cartilage or skin. The rich electrostatic properties of nano (1 millionth of a millimetre) -scale clay particles which mediate these interactions could allow two hurdles facing the development of stem-cell based regenerative therapies to be overcome simultaneously. The first challenge - to deliver and hold stem cells at the right location in the body - is met by the ability of clays to self-organise into gels via the electrostatic interactions of the particles with each other. Cells mixed with a low concentration (less than 4%) of clay particles can be injected into the body and held in the right place by the gel, eliminating, in many situations, the need for surgery. Clay particles can also interact with large structural molecules (polymers) which are frequently used in the development of materials (or 'scaffolds'), designed to host stem cells. These interactions can greatly improve the strength of such structures and could be applied to preserve their stability at the site of injury until regeneration is complete. While several gels and scaffold materials have been designed to deliver and hold stem cells at the site of regeneration, the ability of clay nanoparticles to overcome a second critical hurdle facing stem-cell therapy is what makes them especially exciting. Essential to directing the activity of stem-cells is the carefully controlled provision of key biological signalling molecules. However, the open structures of conventional scaffolds or gels, while essential for the diffusion of nutrients to the cells, means their ability to hold the signalling molecules in the same location as the cells is limited. The ability of clay nano-particles to bind biological molecules presents a unique opportunity to create local environments at a site of injury or disease that can stimulate and control stem-cell driven repair. Dr Dawson's early studies investigated the ability of clay gels to stimulate the growth of new blood vessels by incorporating a key molecular signal that stimulates this process, vascular endothelial growth factor (VEGF). In a manner reminiscent of the observations made in the 60s, Dr Dawson and colleagues observed that adding a drop of clay gel to a solution containing VEGF caused, after a few hours, the disappearance of VEGF from the solution as it became bound to the gel. When placed in an experimental injury model, the gel-bound VEGF stimulated a cluster of new blood vessels to form. These exciting results indicate the potential of clay nanoparticles to create tailor-made micro-environments to foster stem cell regeneration. Dr Dawson is developing this approach as a means of first exploring the biological signals necessary to successfully control stem cell behaviour for regeneration and then, using the same approach, to provide stem cells with these signals to stimulate regeneration in the body. The project will seek to test this approach to regenerate bone lost to cancer or hip replacement failure. If successful the same technology may be applied to harness stem cells for the treatment of a whole host of different scenarios, from burn victims to those suffering with diabetes or Parkinson's.

scholarly journals Synthesis, Structure and Diffusion Pathways of Fast Lithium-Ion Conductors in the Polymorphs α- and β-Li8SnP4

2021 ◽  
Author(s):  
Thomas F Fässler ◽  
Stefan Strangmüller ◽  
Henrik Eickkhoff ◽  
Wilhelm Klein ◽  
Gabriele Raudaschl-Sieber ◽  
...  
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Lithium Ion ◽  
Conducting Materials ◽  
Increasing Demand ◽  
Battery Technology ◽  
Lithium Ion Conductors ◽  
And Diffusion ◽  
Ion Conductors

The increasing demand for a high-performance and low-cost battery technology promotes the search for Li+-conducting materials. Recently, phosphidotetrelates and aluminates were introduced as an innovative class of phosphide-based Li+-conducting materials...

Sign in / Sign up

Export Citation Format

Share Document