scholarly journals Highly Selective Synthesis of Chlorophenols under Microwave Irradiation

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Yawen Xiong ◽  
Hongdong Duan ◽  
Xia Meng ◽  
Zhaoyun Ding ◽  
Weichun Feng

Oxychlorination of various phenols is finished in 60 minutes with high efficiency and perfect selectivity under microwave irradiation. These reactions adopt copper(II) chloride (CuCl2) as the catalyst and hydrochloric acid as chlorine source instead of expensive and toxic ones. Oxychlorination of phenols substituted with electron donating groups (methyl, methoxyl, isopropyl, etc.) atortho-andmeta-positions is accomplished with higher conversion rates, lower reaction time, and excellent selectivity. A proposed reaction mechanism is deduced; one electron transfers from CuCl2to phenol followed by the formation of tautomeric radical that can be rapidly captured by chlorine atom and converts intopara-substituted product.

2017 ◽  
Vol 5 (25) ◽  
pp. 6336-6342 ◽  
Author(s):  
Yan Sun ◽  
Jianli Wang ◽  
Mingzhe Chen ◽  
Chunsheng Li ◽  
Zhenpeng Hu ◽  
...  

The morphology-controlled preparation of t-Ba2V2O7 helical-like meso/nanosquares via a high-efficiency microwave radiation-assisted surfactant strategy and their unique magnetic performance as a function of particle size and reaction time were reported.


2020 ◽  
Vol 7 (2) ◽  
pp. 145-156
Author(s):  
Pravinkumar Patil ◽  
Gangadhar Bhopalkar ◽  
Sainath Zangade

Background: The various industrial processes have a diverse effect on the environment through pollution. In view of these observations, some environmentally benign synthetically protocols have developed under green chemistry. For rapid and sustainable synthesis, the microwave irradiation (MI) has gained popularity as a powerful tool compared to conventional synthesis. The present study describes the synthesis of novel substituted 1, 3-diaryl-2-propene-1-one derivative using alumina supported K3PO4-MWI combination. Objective: Chalcones are important compounds which are widely spread in nature like in fruits, vegetables, tea, spices, etc. The 2’-hydroxy derivative of chalcones plays an important role in the synthesis of bioactive compounds. The present communication deals with a convenient and rapid synthesis of 1, 3-diaryl-2-propene-1-one under the support of alumina-tripotassium phosphate and microwave irradiation. Our efforts are focused on the introduction of typical and easier route for the synthesis of title compounds using a microwave. All synthesized chalcones have been screened and evaluated for the antioxidant activity by DPPH and nitric oxide radical scavenging. Some of these compounds are found to be more potent scavengers and may lead to the development of a new class of antioxidants. Methods: The α, β-unsaturated carbonyl functionality contains two electrophilic centers allowing them to undergo addition and cyclization reactions with different nucleophiles. In the literature survey, we found that Chalcones were synthesized using tripotassium phosphate catalyst under refluxing by a conventional method. A novel method for the synthesis of 1, 3-diaryl-2-propene-1-one via Claisen Schmidt has been introduced by reacting substituted 2’- hydroxyl acetonaphthones with substituted aromatic aldehydes under the support of basic alumina –tripotassium phosphate via microwave radiations. Formation of corresponding Chalcones was confirmed by spectral studies followed by their screening for antioxidant activity. The scavenging activity is expressed in terms of % inhibition and IC50 value (μg/ml). Results: The structures of newly synthesized Chalcones were confirmed and in good agreement with obtained spectral analysis such as IR, NMR, Mass and elemental analysis. Commercially available basic alumina and tripotassium phosphate in combination of microwave were utilized and found to be effective, convenient route for the synthesis of 1, 3-diaryl-2-propene-1-one derivatives with desirable yields in short reaction time (5-12 min). The results of antioxidant activity revealed that the IC50 value for compounds 3a, 3d, 3e, 3f, 3g, 3h, 3j, 3l and 3n are lower than that of standard ascorbic acid to scavenge DPPH radical. This indicates that these compounds are more significant scavengers in comparison with standard drug. On the other hand, compounds 3a, 3b, 3c, 3d, 3g, 3l and 3n are more potent scavengers for NO free radical. Conclusion: We have introduced an efficient, ecofriendly, simple and fast microwave assisted method using basic alumina-tripotassium phosphate for the synthesis of 1, 3-diaryl-2-propene-1- one derivatives. Microwave irradiation provides an effective way for the preparation of Chalcones in terms of several advantages as a simple procedure, short reaction time, milder reaction condition, cleaner reaction and excellent yield. The scavenging activity of chalcones against DPPH and NO free radicals showed excellent properties of antioxidants.


Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 877
Author(s):  
Chieh-Kai Chan ◽  
Chien-Yu Lai ◽  
Cheng-Chung Wang

Herein, we report a facile synthetic methodology for the preparation of 2,3-dialkylquinolines from anilines and propionaldehydes. This cyclization involved environmentally friendly Nafion® NR50 as an acidic catalyst with microwave irradiation as the heating source. A series of substituted 2-ethyl-3-methylquinolines were prepared from various anilines and propionaldehyde derivatives through this protocol with good to excellent yields. Some new chemical structures were confirmed by X-ray single-crystal diffraction analysis and the related data were provided. The plausible reaction mechanism studies are also discussed.


Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1732
Author(s):  
Yuanyuan Yu ◽  
Yongjun Sun ◽  
Jun Zhou ◽  
Aowen Chen ◽  
Kinjal J. Shah

In this study, a high-efficiency magnetic heavy metal flocculant MF@AA was prepared based on carboxymethyl chitosan and magnetic Fe3O4. It was characterized by SEM, FTIR, XPS, XRD and VSM, and the Cu(II) removal rate was used as the evaluation basis for the preparation process. The effects of AMPS content, total monomer concentration, photoinitiator concentration and reaction time on the performance of MF@AA flocculation to remove Cu(II) were studied. The characterization results show that MF@AA has been successfully prepared and exhibits good magnetic induction characteristics. The synthesis results show that under the conditions of 10% AMPS content, 35% total monomer concentration, 0.04% photoinitiator concentration, and 1.5 h reaction time, the best yield of MF@AA is 77.69%. The best removal rate is 87.65%. In addition, the response surface optimization of the synthesis process of MF@AA was performed. The optimal synthesis ratio was finally determined as iron content 6.5%, CMFS: 29.5%, AM: 53.9%, AMPS: 10.1%. High-efficiency magnetic heavy metal flocculant MF@AA shows excellent flocculation performance in removing Cu(II). This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove Cu(II) in wastewater.


Author(s):  
Mousumi Chakraborty ◽  
Vaishali Umrigar ◽  
Parimal A. Parikh

The present study aims at assessing the effect of microwave irradiation against thermal heat on the production of N-acetyl-p-anisidine by acetylation of p-anisidine. The acetylation of p-anisidine under microwave irradiation produces N-acetyl-p-anisidine in shorter reaction times, which offers a benefit to the laboratories as well as industries. It also eliminates the use of excess solvent. Effects of operating parameters such as reaction time, feed composition, and microwave energy and reaction temperature on selectivity to the desired product have been investigated. The results indicate as high as a 98% conversion of N-acetyl-p-anisidine can be achieved within 12-15 minutes using acetic acid. The use of acetic acid as an acetylating agent against conventionally used acetic anhydride eliminates the handling of explosive acetic anhydride and also the energy intensive distillation step for separation of acetic acid. Organic solvent like acetic anhydride are not only hazardous to the environment, they are also expensive and flammable.


Teknik ◽  
2013 ◽  
Vol 34 (2) ◽  
pp. 116
Author(s):  
Ardian Dwi Yudhistira ◽  
Istadi Istadi

Biodiesel is one of alternative renewable energy source to substitute diesel fuel. Various biodiesel productionprocesses through transesterification reaction with a variety of catalysts have been developed by previousresearcher. This process still has the disadvantage of a long reaction time, and high energy need. DielectricBarrier Discharge (DBD) plasma electro-catalysis may become a solution to overcome the drawbacks in theconventional transesterification process. This process only needs a short time reaction and low energy process.The purpose of this study was to assess the performance of DBD plasma rector in making biodiesel such as: theeffect of high voltage electric value, electrodes gap, mole ratio of methanol / oil, and reaction time. TheResearch method was using GC-MS (Gas Cromatography-Mass Spectrofotometry) and FTIR (FourierTransform Infrared Spectrofotometry) and then it will be analysed the change of chemical bond betweenreactant and product. So, the reaction mechanism can be predicted. Biodiesel is produced using methanol andpalm oil as reactants and DBD plasma used as reactor in batch system. Then, reactants contacted by highvoltage electric. From the results of this research can be concluded that the reaction mechanism occurs in theprocess is the reaction mechanism of cracking, the higher of electric voltage and the longer of reaction time leadto increasing of product yield. The more of mole ratio of methanol / oil and widening the gap between theelectrodes lead to decreased product yield. From this research, product yield maksimum is 89,8% in the variableof rasio mol metanol/palm oil 3:1, voltage 10 kV, electrode gap 1,5 cm, and reaction time 30 seconds.


2014 ◽  
Vol 554 ◽  
pp. 500-504 ◽  
Author(s):  
Farid Nasir Ani ◽  
Ahmed Bakheit Elhameed

This paper investigated the three critical reaction parameters including catalyst concentration, microwave exit power and reaction time for the transesterification process of jatropha curcas oil using microwave irradiation. The work is an attempt to reduce the production cost of biodiesel. Similar quantities of methanol to oil molar ratio 6:1 and calcium oxide as a heterogeneous catalyst were used. The results showed that the best yield percentage 96% was obtained using 300W microwave exit power, 8 %wt CaO and 7 min. The methyl ester FAME obtained was within the standard of biodiesel fuel.


2018 ◽  
Vol 78 (6) ◽  
pp. 1260-1267 ◽  
Author(s):  
Mohammad Malakootian ◽  
Mohammad Reza Heidari

Abstract Phenol and its derivatives are available in various industries such as refineries, coking plants, steel mills, drugs, pesticides, paints, plastics, explosives and herbicides industries. This substance is carcinogenic and highly toxic to humans. The purpose of the study was to investigate the removal of phenol from wastewater of the steel industry using the electrocoagulation–photo-Fenton (EC-PF) process. Phenol and chemical oxygen demand (COD) removal efficiency were investigated using the parameters pH, Fe2+/H2O2, reaction time and current density. The highest removal efficiency rates of phenol and COD were 100 and 98%, respectively, for real wastewater under optimal conditions of pH = 4, current density = 1.5 mA/cm2, Fe2+/H2O2 = 1.5 and reaction time of 25 min. Combination of the two effective methods for the removal of phenol and COD, photocatalytic electrocoagulation photo-Fenton process is a suitable alternative for the removal of organic pollutants in industry wastewater because of the low consumption of chemicals, absence of sludge and other side products, and its high efficiency.


2016 ◽  
Vol 11 (1) ◽  
Author(s):  
Saprini Hamdiani ◽  
Jannatin Arduha ◽  
Agus Abhi Purwoko ◽  
Saprizal Hadisaputra

Abstrak. Sifat inhibitor korosi senyawa turunan thiaamida-pirazolindol (TP) telah dikaji menggunakan teori fungsional kerapatan pada tingkatan teori B3LYP/6-31G(d). Pengaruh gugus substitusi pendonor dan penarik elektron (NH2, SH, CHCH2, CH3, OH, CHO, COOH, F, NO2) terhadap efisiensi anti korosi senyawa thiaamida-pirazolindol juga dihitung. Parameter kuantum untuk senyawa anti korosi seperti energi orbital (EHOMO dan ELUMO), potensial ionisasi (I), afinitas elektron (A) dan elektronegativitas (χ) memiliki hubungan yang linier dengan efisiensi anti korosi (IE%) senyawa turunan thiaamida-pirazolindol. Gugus pendonor elektron meningkatkan nilai IE%. Urutan kenaikan IE% adalah NO2 < CHO < COOH < F < CHCH2 < OH < CH3 < NH2. Penambahan gugus pendonor elektron amina (NH2) meningkatkan IE% hingga 98,76 % dibandingkan IE% thiaamida-pirazolindol murni 90,80 %. Penambahan gugus penarik elektron menurunkan IE% hingga mencapai 82,82 %. Kajian teoritis ini akan berkontribusi besar dalam mendesain dan sintesis senyawa inhibitor organik dengan efisiensi inhibitor tinggi.Kata kunci: inhibitor korosi, teori fungsional kerapatan, thiaamida-pirazolindolAbstract. Corrosion inhibitor properties of thiamide pyrazolindole and its derivatives has been elucidated by means of density functional theory (DFT) at B3LYP/6-31G(d) level of theory. Effect of electron donating and withdrawing groups such as NH2, SH, CHCH2, CH3, OH, CHO, COOH, F and NO2 on the corrosion inhibitor of thiamide pyrazolindole derivatives also have been studied. The quantum chemical parameters such as the frontier orbital energies (EHOMO), ionization potential (I), electron affinity (A) and electronegativity (χ) are closely related to the corrosion inhibition efficiency (IE%) of thiamide pyrazolindole derivatives. The presence of electron donating groups increases IE% values meanwhile electron withdrawing groups reduce IE% values. The enhancement of IE% follows NO2 < CHO < COOH < SH < F < CH3 < CHCH2 < OH < NH2. Electron donating NH2 group gives 98,76 % of IE%, pure thiamide pyrazolindol IE% = 90,80 %. In contrast, electron withdrawing NO2 group gives IE% only 82,82 %. This theoretical study would have a significant contribution in designing high-efficiency organic corrosion inhibitors.Keywords: corrosion inhibitors, density functional theory, thiamide pyrazolindol


Sign in / Sign up

Export Citation Format

Share Document