scholarly journals Experimental Study on the Softening Characteristics of Sandstone and Mudstone in Relation to Moisture Content

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Gui-chen Li ◽  
Chong-chong Qi ◽  
Yuan-tian Sun ◽  
Xiao-lin Tang ◽  
Bao-quan Hou
Keyword(s):  
Moisture Content ◽  
Vertical Displacement ◽  
Surface Porosity ◽  
Shear Tests ◽  
Moisture Contents ◽  
Dynamic Finite Element ◽  
Rock Types ◽  
Underground Roadway ◽  
The Stability ◽  
Kinetics Of

The kinetics of fluid-solid coupling during immersion is an important topic of investigation in rock engineering. Two rock types, sandstone and mudstone, are selected in this work to study the correlation between the softening characteristics of the rocks and moisture content. This is achieved through detailed studies using scanning electron microscopy, shear tests, and evaluation of rock index properties during exposure to different moisture contents. An underground roadway excavation is simulated by dynamic finite element modeling to analyze the effect of moisture content on the stability of the roadway. The results show that moisture content has a significant effect on shear properties reduction of both sandstone and mudstone, which must thus be considered in mining or excavation processes. Specifically, it is found that the number, area, and diameter of micropores, as well as surface porosity, increase with increasing moisture content. Additionally, stress concentration is negatively correlated with moisture content, while the influenced area and vertical displacement are positively correlated with moisture content. These findings may provide useful input for the design of underground roadways.

Experimental Study of the Creep Disturbance Effect and Acoustic Emission Characteristics of Mudstone with Different Moisture Contents

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yongjiang Yu ◽  
Pengbo Wang ◽  
Shipeng Zhang ◽  
Jingjing Liu
Keyword(s):  
Acoustic Emission ◽  
Moisture Content ◽  
Soft Rock ◽  
Clear Understanding ◽  
Creep Failure ◽  
Soft Rocks ◽  
Moisture Contents ◽  
Accelerated Creep ◽  
The Stability ◽  
The Impact

It is important to have a clear understanding of the creep characteristics of water-rich soft rocks under a dynamic load and the evolution of cracks because soft rock roadways in deep mines are very sensitive to disturbances, and instability and damage can easily occur under the impact of disturbances such as mining and blasting. In this study, a self-developed disturbed creep test bench was used to conduct graded loading creep disturbance tests on mudstone specimens with different moisture contents. The results show that an increase in the moisture content leads to a significant increase in the creep failure strain of mudstone, and the accelerated creep rate is greatly accelerated. Moreover, as the moisture content increases, the type of mudstone creep disturbance failure gradually changes from accelerated creep failure to disturbance failure. By analyzing the acoustic emission (AE) characteristics of the mudstone creep disturbance tests, it was found that the increase in the moisture content greatly weakens the AE count and the accumulated energy. In each stage of disturbance, the AE signals jumped, and the stability was restored at the end of the disturbance. As the load increased, the specimen entered the accelerated creep stage, the AE signal increased exponentially, and the internal cracks expanded rapidly until failure occurred. It is of great significance to carry out creep disturbance experiments and to analyze the evolution of the internal cracks in specimens with different moisture contents to maintain the long-term stability of deep soft rocks.

scholarly journals Effects of Clay and Moisture Content on Direct Shear Tests for Clay-Sand Mixtures

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Muawia A. Dafalla
Keyword(s):  
Internal Friction ◽  
Moisture Content ◽  
Direct Shear Test ◽  
Shear Test ◽  
Horizontal Displacement ◽  
Direct Shear ◽  
Shear Tests ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Moisture Contents

The direct shear test using shear box is commonly recommended by practicing geotechnical engineers to obtain the cohesion and angle of internal friction for granular soils. The clay liners involve sand as a main constituent with added clay of variable proportions. This research aims at investigating the reliability of using the direct shear test for different clay contents and different moisture contents using an adequate shearing strain. These factors were found to affect the bilinear trends of shear force versus horizontal displacement profile as well as vertical displacement versus horizontal displacement curves. The cohesion of the mixture was found to increase consistently with the increase of clay content. Increase in moisture content was found to cause a drop in both cohesion and angle of internal friction. These changes are not independent of the density state of clay-sand mixtures. Standard compaction properties for a range of clay-sand mixtures were investigated. This work provides the general trends expected in direct shear tests for clay-sand mixtures of variable clay and moisture contents.

Kinetics of Various 99mTc-Sn-Pyrophosphate Compounds in the Rat

1977 ◽  
Vol 16 (04) ◽  
pp. 157-162 ◽  
Author(s):  
C. Schümichen ◽  
B. Mackenbrock ◽  
G. Hoffmann
Keyword(s):  
Normal Saline ◽  
Half Life ◽  
Compound A ◽  
Short Half Life ◽  
Low Concentrations ◽  
The Stability ◽  
Kinetics Of ◽  
In Vitro Stability

SummaryThe bone-seeking 99mTc-Sn-pyrophosphate compound (compound A) was diluted both in vitro and in vivo and proved to be unstable both in vitro and in vivo. However, stability was much better in vivo than in vitro and thus the in vitro stability of compound A after dilution in various mediums could be followed up by a consecutive evaluation of the in vivo distribution in the rat. After dilution in neutral normal saline compound A is metastable and after a short half-life it is transformed into the other 99mTc-Sn-pyrophosphate compound A is metastable and after a short half-life in bone but in the kidneys. After dilution in normal saline of low pH and in buffering solutions the stability of compound A is increased. In human plasma compound A is relatively stable but not in plasma water. When compound B is formed in a buffering solution, uptake in the kidneys and excretion in urine is lowered and blood concentration increased.It is assumed that the association of protons to compound A will increase its stability at low concentrations while that to compound B will lead to a strong protein bond in plasma. It is concluded that compound A will not be stable in vivo because of a lack of stability in the extravascular space, and that the protein bond in plasma will be a measure of its in vivo stability.

The Smoulder Stream of Cigarettes / Zur Kenntnis des Glimmstromes von Cigaretten

1965 ◽  
Vol 3 (2) ◽  
Author(s):  
F. Seehofer ◽  
W. Schulz
Keyword(s):  
Moisture Content ◽  
Spatial Position ◽  
High Yield ◽  
Physical Conditions ◽  
Moisture Contents ◽  
Cigarette Paper ◽  
First Time

AbstractThe phenomenon of the smoulder stream flowing through the cigarette during smouldering and during the puff intervals is demonstrated for the first time and its dependence upon physical conditions is examined. The volume of the smoulder stream can amount up to 180 ml per cigarette. Increasing draw resistance of the cigarette and augmenting moisture content of the tobacco as well as perforation of the cigarette paper have a decreasing effect on volume and velocity of the smoulder stream. The porosity of the cigarette paper has no perceptible influence. The spatial position of the cigarette affects volume and velocity of the smoulder stream. The influence exercised by the smoulder stream on the yields of total condensate, nicotine, phenols, aldehydes, and acroleine when the cigarette tip is open during the puff intervals is determined. When the moisture contents of the tobacco were extremely high, yield decreases reaching 50 % could be observed.

Drying kinetics of processed natural coffee with high moisture content

2017 ◽  
Vol 12 (3) ◽  
pp. 400 ◽  
Author(s):  
Valdiney Cambuy Siqueira ◽  
Flávio Meira Borém ◽  
Guilherme Euripedes Alves ◽  
Eder Pedroza Isquierdo ◽  
Afonso Celso Ferreira Pinto ◽  
...  
Keyword(s):  
Moisture Content ◽  
Drying Kinetics ◽  
High Moisture Content ◽  
High Moisture ◽  
Kinetics Of

Objetivou-se, com o presente trabalho, propor um novo método de processamento e secagem, assim como avaliar o comportamento dos grãos submetidos a este processo, por meio da taxa de redução de água e do ajuste de diferentes modelos matemáticos aos dados experimentais da secagem. Os frutos colhidos no estágio maduro foram divididos em três lotes. O primeiro foi seco continuamente à temperatura de 40±1 °C. O segundo consiste na secagem do café natural até os teores de água de 0,56±0,02, 0,41±0,02, 0,28±0,02 e 0,20±0,02 decimal (base seca, b.s.), seguido de beneficiamento e secagem contínua nas temperaturas de 35±1 ºC e 40±1 ºC. O terceiro lote correspondeu à secagem contínua do café descascado e desmucilado na temperatura de 40±1 °C. Em todos os lotes, a secagem foi encerrada quando os grãos atingiram o teor de água de 0,12±0,05 (b.s.). Aos dados experimentais da secagem foram ajustados dez modelos matemáticos utilizados para representação da secagem dos produtos agrícolas. Além da representação da cinética de secagem foi avaliada a taxa de redução de água dos grãos. Conclui-se que a taxa de redução de água é maior para a temperatura de secagem de 40±1 °C, especialmente para maiores teores de água. O tempo total de secagem do café beneficiado com alto teor de água é expressivamente reduzido, quando comparado ao tempo de secagem completa do café natural. O modelo de Midilli descreve satisfatoriamente a cinética de secagem do café beneficiado.

Modeling of sorption kinetics of U(VI) micro-quantities nanostructured materials with anatase mesoporous structures

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Veniamin Zheleznov ◽  
Aleksey Golikov ◽  
Tatiana Sokolnitskaya ◽  
Sergey Ivannikov
Keyword(s):  
Nanostructured Materials ◽  
Sorption Kinetics ◽  
Uranyl Ion ◽  
Competitive Sorption ◽  
Hydroxyl Groups ◽  
Complex Ions ◽  
The Stability ◽  
Kinetics Of ◽  
Mesoporous Structures ◽  
Ionic Forms

Abstract The sorption kinetics of uranyl ions micro-quantities from fluoride solutions by nanostructured materials with anatase mesoporous structures has been studied. Using the model of competitive sorption of ions and positively charged complexes of uranyl ion on deprotonated hydroxyl groups of an anatase, kinetic curves of changes in the ratio of ionic forms of uranium in solution were calculated. Modeling was carried out under the assumption of a two-stage mechanism of uranium complex ions sorption. The modeling considered the influence of the uranyl ion carbonate complexes formation. The shift in equilibrium among ionic forms of uranyl correlates with the stability of the complexes in solution.

Developing a Linearization Method to Determine Optimum Blending for Surimi with Varied Moisture Contents Using Linear Programming

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Hyeon W. Park ◽  
Jae W. Park ◽  
Won B. Yoon
Keyword(s):  
Linear Programming ◽  
Moisture Content ◽  
Standard Procedure ◽  
Unit Cost ◽  
Linearization Method ◽  
Model Parameters ◽  
Additional Information ◽  
Moisture Contents ◽  
Design Variables ◽  
Critical Moisture

AbstractNovel algorithm to determine the least cost formulation of a surimi blend was developed using linear programming (LP). Texture properties and the unit cost of surimi blend at the target moisture content were used as constraint functions and the objective function, respectively. The mathematical models to describe the moisture content dependence of the ring tensile properties were developed using critical moisture content, and the model parameters were used for the least cost LP (LCLP) model. The LCLP model successfully predicted the quality of surimi blend. Sensitivity analysis was used to obtain an additional information when the perturbations of design variables are provided. A standard procedure to determine the least cost formulation for blending surimi with varied moisture contents was systematically developed.

Adhesion of Fine Particles at Solid/Solution Interfaces

MRS Bulletin ◽  
1990 ◽  
Vol 15 (1) ◽  
pp. 41-47 ◽  
Author(s):  
Nikola Kallay
Keyword(s):  
Fine Particles ◽  
Plane Surface ◽  
Solid Surfaces ◽  
Liquid Media ◽  
Latex Dispersions ◽  
Colloid Particles ◽  
The Subject ◽  
Kinetic Investigations ◽  
The Stability ◽  
Kinetics Of

The adhesion of particles at solid surfaces in liquid media has attracted the attention of scientists because of its various applications as well as the theoretical significance of the processes involved. Early studies were characterized either by poorly defined systems or limited by the properties of a few morphologically well-defined model colloids, such as latex dispersions. Consequently, results were either of semiquantitative nature or were related to some specific cases, which eluded general conclusions. New methods for preparing uniform particles of different compositions, shapes, and sizes make it possible to approach the problem in a more comprehensive manner. For example, to demonstrate difficulties caused by polydispersity, it is sufficient to mention that the electrostatic interaction energy between a plane surface and a particle is approximately proportional to the particle radius, yet the rate of deposition depends exponentially on the height of the energy barrier.In principle, static and dynamic approaches may be employed in the study of particle adhesion. The static method yields the force required to detach an adhered particle, while kinetic investigations of attachment and detachment give the rates of the respective processes. Both methods offer information on the stability of the system in terms of the bond strength of adhered solids. For small colloid particles, which are the subject of thermal random Brownian motion, the dynamic approach is more appropriate. This article emphasizes the kinetics of deposition and detachment of small colloid particles in liquid media.

Effect of Bromus inermis Leyss Planting on Dynamic Changes of Soil Moisture Contents on the Bare Slope

2013 ◽  
Vol 807-809 ◽  
pp. 1648-1652
Author(s):  
Tie Jun Sun ◽  
Baderihu Tajilake
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Regulatory Mechanism ◽  
Dynamic Balance ◽  
Bromus Inermis ◽  
Dynamic Changes ◽  
Moisture Contents ◽  
Biological Characters ◽  
Underground Biomass

Experiment was executed to plant eco-grass of Bromus inermis Leyss on 15°bare slopes, and study effect of biological characters on dynamics of soil moisture contents. The results indicated that vegetation restored quickly on the bare slope after the eco-grass planted. There were 2473.4 kg/hm2 of overground biomass and 1744.1kg/hm2 of underground biomass, and 70% of underground biomass was in 0-10cm layer of soil. Meanwhile, there was a regulatory mechanism of soil moisture content for Bromus inermis Leyss. When rainfall was enough, soil moisture content in 0-80 cm layer could reach to the most of 26.83% quickly this year. Next it could decline near to the first value of 19.81% after rainfall stopped, and keep a dynamic balance between 19.48% and 19.96%. Moreover, the regulatory mechanism realized though underground biomass, and was clearer with underground biomass increasing, especially in the 0-40cm layer of soil.

Assessment of Moisture Content in Sandy Beach Environments from Multispectral Satellite Imagery

2021 ◽  
Author(s):  
Julie Paprocki ◽  
Nina Stark ◽  
Hans C Graber ◽  
Heidi Wadman ◽  
Jesse E McNinch
Keyword(s):  
Moisture Content ◽  
Laboratory Data ◽  
Field Measurements ◽  
Weather Conditions ◽  
Sandy Beaches ◽  
Percent Error ◽  
Moisture Contents ◽  
Multispectral Satellite Imagery ◽  
Factor C

A framework for estimating moisture content from satellite-based multispectral imagery of sandy beaches was tested under various site conditions and sensors. It utilizes the reflectance of dry soil and an empirical factor c relating reflectance and moisture content for specific sediment. Here, c was derived two ways: first, from in-situ measurements of moisture content and average NIR image reflectance; and second, from laboratory-based measurements of moisture content and spectrometer reflectance. The proposed method was tested at four sandy beaches: Duck, North Carolina, and Cannon Beach, Ocean Cape, and Point Carrew, Yakutat, Alaska. Both measured and estimated moisture content profiles were impacted by site geomorphology. For profiles with uniform slopes, moisture contents ranged from 3.0%-8.0% (Zone 1) and from 8.0%-23.0% (Zone 2). Compared to field measurements, the moisture contents estimated using c calibrated from in-situ and laboratory data resulted in percent error of 3.6%-44.7% and 2.7%-58.6%, respectively. The highest percent error occurred at the transition from Zone 1 to Zone 2. Generally, moisture contents were overestimated in Zone 1 and underestimated in Zone 2, but followed the expected trends based on field measurements. When estimated moisture contents in Zone 1 exceeded 10%, surface roughness, debris, geomorphology, and weather conditions were considered.

Sign in / Sign up

Export Citation Format

Share Document