scholarly journals Study on Cracking Resistance of Basalt Fiber-Reinforced Microbond Asphalt Macadam

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Xin Yan ◽  
Ronghua Ying ◽  
Jian Jin ◽  
Yuntai Zhang
Keyword(s):  
Dynamic Stability ◽  
Resilient Modulus ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Asphalt Pavements ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Cracking Resistance ◽  
Bending Tests ◽  
Semicircular Bending

The aim of the present study was to explore the effect of basalt fibers on the cracking resistance of microbond asphalt macadam and reduce the occurrence of cracks in asphalt pavements with semirigid base. To this end, compressive resilient modulus tests, rutting tests, and semicircular bending tests were conducted on microbond asphalt macadam with different fiber contents, and the change trends of the compressive resilient modulus, dynamic stability, and flexibility index (FI) with fiber content were revealed. According to the results of this study, the addition of basalt fibers affected the compressive resilient modulus, dynamic stability, and FI of microbond asphalt macadam significantly. With the increase of fiber content, the compressive resilient modulus, dynamic stability, and FI presented a uniform trend of increasing first and decreasing afterwards. When the fiber content was 0.4%, various indices reached their maximum values, suggesting that the cracking resistance of the basalt fiber-reinforced microbond asphalt macadam was optimal under this content. This study is of great significance for the application and promotion of basalt fiber-reinforced microbond asphalt macadam.

Investigation on mechanical properties and failure mechanisms of basalt fiber reinforced aluminum matrix composites under different loading conditions

2017 ◽  
Vol 52 (14) ◽  
pp. 1907-1914 ◽  
Author(s):  
Yang Zhiming ◽  
Liu Jinxu ◽  
Feng Xinya ◽  
Li Shukui ◽  
Xu Yuxin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Failure Mechanisms ◽  
Basalt Fiber ◽  
Aluminum Matrix ◽  
Fiber Content ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Static Compression

Basalt fiber reinforced aluminum matrix composites with different fiber contents (i.e. 0 wt%, 10 wt%, 30 wt% and 50 wt%) were prepared by hot-press sintering. Microstructure analysis indicates that basalt fibers are uniformly distributed in 10% basalt fiber reinforced aluminum matrix composite. The interfacial bonding between basalt fibers and aluminum matrix is good, and there is no interface reaction between basalt fiber and aluminum matrix. Quasi-static tensile, quasi-static compression and dynamic compression properties of basalt fiber reinforced aluminum composites were studied, and the influences of basalt fiber content on mechanical properties were discussed. Meanwhile, the failure mechanisms of basalt fiber reinforced aluminum matrix composites with different fiber content were analyzed.

scholarly journals Experimental studies on the dynamic viscoelastic properties of basalt fiber-reinforced asphalt mixtures

2021 ◽  
Vol 28 (1) ◽  
pp. 489-498
Author(s):  
Yongjun Zhang ◽  
Wenbo Luo ◽  
Xiu Liu
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Rutting Resistance ◽  
Dynamic Modulus Test ◽  
Temperature Dynamic

Abstract To study the influence of basalt fibers on the viscoelastic mechanical properties of asphalt concrete (AC) mixtures, unconfined compressive dynamic modulus tests were performed on styrene–butadiene–styrene (SBS)-modified AC mixtures reinforced with various contents of basalt fibers ranging from 0.2 to 0.5% by weight at five temperatures and six load frequencies, and the dynamic moduli and phase angles of the mixtures were measured. Compared with the test results of the control mixture (with no basalt fibers), the data show that the high-temperature dynamic modulus of the mixtures initially increases and subsequently decreases with increasing fiber content and reaches its maximum value when the basalt fiber content is 0.3%, while the low-temperature dynamic modulus decreases monotonically with increasing fiber content. Furthermore, the phase angle of the mixtures initially decreases and later increases with increasing fiber content and reaches its minimum value when the basalt fiber content is 0.3%. These behaviors indicate that the addition of basalt fiber improves the high-temperature rutting resistance and low-temperature cracking resistance of the SBS-modified AC mixtures. In addition, the results of the wheel rut test exhibit a good correlation with the results of the dynamic modulus test, revealing the reliability of the dynamic modulus test for evaluating the high-temperature rutting resistance of basalt-fiber-reinforced AC mixtures.

scholarly journals Improvement of Performance Profile of Acrylic Based Polyester Bio-Composites by Bast/Basalt Fibers Hybridization for Automotive Applications

2021 ◽  
Vol 5 (4) ◽  
pp. 100
Author(s):  
Anjum Saleem ◽  
Luisa Medina ◽  
Mikael Skrifvars
Keyword(s):  
Hybrid Composites ◽  
Flexural Modulus ◽  
Basalt Fiber ◽  
Fiber Composites ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Bast Fiber ◽  
Bast Fibers ◽  
Resin Impregnation ◽  
Structural Applications

New technologies in the automotive industry require lightweight, environment-friendly, and mechanically strong materials. Bast fibers such as kenaf, flax, and hemp reinforced polymers are frequently used composites in semi-structural applications in industry. However, the low mechanical properties of bast fibers limit the applications of these composites in structural applications. The work presented here aims to enhance the mechanical property profile of bast fiber reinforced acrylic-based polyester resin composites by hybridization with basalt fibers. The hybridization was studied in three resin forms, solution, dispersion, and a mixture of solution and dispersion resin forms. The composites were prepared by established processing methods such as carding, resin impregnation, and compression molding. The composites were characterized for their mechanical (tensile, flexural, and Charpy impact strength), thermal, and morphological properties. The mechanical performance of hybrid bast/basalt fiber composites was significantly improved compared to their respective bast fiber composites. For hybrid composites, the specific flexural modulus and strength were on an average about 21 and 19% higher, specific tensile modulus and strength about 31 and 16% higher, respectively, and the specific impact energy was 13% higher than bast fiber reinforced composites. The statistical significance of the results was analyzed using one-way analysis of variance.

scholarly journals Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1556 ◽  
Author(s):  
Fucheng Guo ◽  
Rui Li ◽  
Shuhua Lu ◽  
Yanqiu Bi ◽  
Haiqi He
Keyword(s):  
Fiber Length ◽  
Fiber Type ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Temperature Stability ◽  
Fiber Content ◽  
Engineering Properties ◽  
Fiber Reinforced ◽  
High Temperature Stability

Fiber-reinforced asphalt mixture has been widely used in pavement engineering to not only prevent asphalt binder leakage but also improve engineering properties of asphalt mixture. However, the research on three key parameters, namely fiber type, fiber length, and fiber content, which significantly affect the performance of fiber-reinforced asphalt mixture, have seldom been conducted systematically. To determine these three key parameters in the support of the application of fibers in mixture scientifically, three commonly used fibers were selected, basalt fiber, polyester fiber, and lignin fiber, and the testing on fibers, fiber-reinforced asphalt binders, and fiber-reinforced asphalt mixtures was conducted afterwards. The results showed: the favorable fiber type was basalt fiber; the favorable basalt fiber length was 6mm; the engineering properties including high temperature stability, low temperature crack resistance, and water susceptibility were clearly improved by the added basalt fiber, and the optimum basalt fiber content was 0.4 wt.%. The obtained results may be valuable from a practical point of view to engineers and practitioners.

scholarly journals Effect of Mix Proportion Parameters on Behaviors of Basalt Fiber RPC Based on Box-Behnken Model

2019 ◽  
Vol 9 (10) ◽  
pp. 2031 ◽  
Author(s):  
Hanbing Liu ◽  
Shiqi Liu ◽  
Shurong Wang ◽  
Xin Gao ◽  
Yafeng Gong
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Basalt Fibers ◽  
Factors Affecting ◽  
Remarkable Effect ◽  
Mix Proportion ◽  
Reactive Powder

Basalt fibers are widely used in the modification of concrete materials due to its excellent mechanical properties and corrosion resistance. In this study, the basalt fibers were used to modify reactive powder concrete (RPC). The effect of four mix proportion parameters on the working and mechanical properties of basalt fiber reactive powder concrete (BFRPC) was evaluated by the response surface methodology (RSM). The fluidity, flexural and compressive strength were tested and evaluated. A statistically experimental model indicated that D (the silica fume to cement ratio) was the key of interactions between factors, affecting other factors and controlling properties of BFRPC. The increase in basalt fiber content had a remarkable effect on increasing the flexural and compressive strength when D = 0.2. The addition of basalt fiber obviously improved the mechanical properties of RPC. While when D = 0.4, the decrease of fiber content and the increase of quartz sand content could increase the compressive strength.

scholarly journals Strength and Deformability of Fiber Reinforced Cement Paste on the Basis of Basalt Fiber

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Yury Barabanshchikov ◽  
Ilya Gutskalov
Keyword(s):  
Crack Resistance ◽  
Cement Paste ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Particulate Reinforcement ◽  
Reinforced Cement ◽  
Basaltic Fiber

The research object of the paper is cement paste with the particulate reinforcement of basalt fiber. Regardless of fibers’ length at the same fiber cement mix workability and cement consumption equality compressive solidity of the specimens is reduced with increasing fiber content. This is due to the necessity to increase the water-cement ratio to obtain a given workability. The flexural stability of the specimens with increasing fiber content increments in the same conditions. There is an optimum value of the fibers’ dosage. That is why stability has a maximum when crooking. The basaltic fiber particulate reinforcement usage can abruptly increase the cement paste level limiting extensibility, which is extremely important in terms of crack resistance.

Effect of Polypropylene Fiber on the Properties of Cement Mortar

2014 ◽  
Vol 919-921 ◽  
pp. 1903-1907
Author(s):  
Jun Pan ◽  
Fei Li ◽  
Xue Wu Zhang
Keyword(s):  
Reinforced Concrete ◽  
Fly Ash ◽  
Cement Mortar ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Types ◽  
Fiber Reinforced ◽  
Bending Tests ◽  
Reinforced Cement

This thesis discusses the influence of fly ash content, fiber content and fiber types on the performance of fiber reinforced concrete, through the flexural and compressive tests on fiber reinforced cement mortar, and the splitting tensile and bending tests on the fiber reinforced concrete. The test result shows that the adding of fly ash can better play the enhancement of polypropylene fiber; the change of the fiber content affects the flexural strength of cement mortar and obviously improves the splitting tensile strength of the reinforced concrete; and the polypropylene fiber and steel fiber have different enhancement on cement mortar due to their qualitative differences.

Feasibility Study of Using Basalt Fibers as the Reinforcement Phase in Fiber-Cement Products

2018 ◽  
Vol 766 ◽  
pp. 252-257 ◽  
Author(s):  
Parinya Chakartnarodom ◽  
Wichit Prakaypan ◽  
Pitcharat Ineure ◽  
Nuntaporn Kongkajun ◽  
Nutthita Chuankrerkkul
Keyword(s):  
Feasibility Study ◽  
Mechanical Test ◽  
Construction Materials ◽  
Basalt Fiber ◽  
Modulus Of Rupture ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Reinforced Cement ◽  
Industrial Level ◽  
Cement Board

The aim of this work was to study the feasibility of using basalt fibers as the reinforcement phase in fiber-cement products which was the fiber-reinforced construction materials used for roof, wall, ceiling, and floor applications. The feasibility study included (1) the alkaline resistant test of the basalt fibers by soaking the basalt fibers in 1 N Ca(OH)2up to 28 days, and (2) the mechanical test based on ASTM C1185 standard on the fiber-cement board that used basalt fibers as a reinforcement phase. Scanning electron microscope (SEM) and x-ray diffractometer (XRD) were used to characterize the basalt fibers after alkaline resistant test. The basalt-fiber reinforced cement board was produced on the industrial level by using Hatschek process.From the alkaline resistant test, basalt fibers had well alkaline resistant. From the mechanical test, the modulus of rupture (MOR) of basalt-fiber reinforced cement boards passed the requirement of TIS 1427-2540 and ASTM C1186 standard. Therefore, basalt fibers could be considered as a good candidate for using as a reinforcement phase in the fiber-cement products.

scholarly journals Effect of PVA fiber on durability of cementitious composite containing nano-SiO2

2019 ◽  
Vol 8 (1) ◽  
pp. 116-127 ◽  
Author(s):  
Peng Zhang ◽  
Qing-fu Li ◽  
Juan Wang ◽  
Yan Shi ◽  
Yi-feng Ling
Keyword(s):  
Volume Fraction ◽  
Fiber Content ◽  
Nano Particles ◽  
Cementitious Composites ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Cracking Resistance ◽  
Carbonation Resistance ◽  
Pva Fiber

Abstract In the current investigation, the influence of polyvinyl alcohol (PVA) fibers on flowability and durability of cementitious composite containing fly ash and nano-SiO2 was evaluated. PVA fibers were added into the composite at a volume fraction of 0.3%, 0.6%, 0.9%, and 1.2%. The flowability of the fresh cementitious composite was assessed using slump flow. The durability of cementitious composite includes carbonation resistance, permeability resistance, cracking resistance as well as freezing-thawing resistance, which were evaluated by the depth of carbonation, the water permeability height, cracking resistance ratio of the specimens, and relative dynamic elastic modulus of samples after freeze-thaw cycles, respectively. The results indicated that addition of PVA fibers had a little disadvantageous influence on flowability of cementitious composite, and the flowability of the fresh mixtures decreased with increases in PVA fiber content. Incorporation of PVA fibers significantly improved the durability of cementitious composites regardless of addition of nano-particles. When the fiber content was less than 1.2%, the durability indices of permeability resistance and cracking resistance increased with fiber content. However, the durability indices of carbonation resistance and freezing-thawing resistance began to decrease as the fiber dosage increased from 0.9% to 1.2%. The fiber reinforced cementitious composite exhibited better durability due to addition of nano-SiO2 particles. Nano-SiO2 particle improves microscopic structure of fiber reinforced cementitious composites, and the nano-particles are beneficial for PVA fibers to play the role of reinforcement in cementitious composites.

Sign in / Sign up

Export Citation Format

Share Document