scholarly journals SRFabric: A Semi-Reconfigurable Rack Scale Topology

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Hu Song ◽  
Quan Fang ◽  
Yibo Jin ◽  
Zhuzhong Qian
Keyword(s):  
Data Center ◽  
Interconnection Network ◽  
Optimal Number ◽  
Path Diversity ◽  
Comparable Performance ◽  
Scale Network ◽  
And Performance ◽  
The Cost ◽  
Diverse Data ◽  
Scale Design

Rack scale design is a promising trend towards customized hardware design, where high density clusters of SoCs are integrated in the rack. One of the biggest challenges for rack scale computing is the interconnection network. Traditional data center topologies require too many ToR switches to support hundreds of SoCs, while distributed fabrics deliver a considerably high end-to-end latency and network oversubscription. Since no one topology fits all kinds of workloads, a flexible in-rack topology requires a careful redesign to dynamically adapt to diverse data center traffic within tight cost and space constraints in the rack. SRFabric is a semi-reconfigurable rack scale network topology that exploits the high path diversity, the cost-effectiveness of distributed fabrics, and the dynamic reconfigurability of circuit switches. This is accomplished by enabling multiple static ports and dynamic ports for each SoC. Leveraging the partial link reconfigurability, SRFabric is able to optimize its topology to dynamically adapt to various workload patterns. We further propose the design of SRFabric to decide the nearly optimal number of dynamic ports and static ports for expected communication density and performance. Extensive evaluations demonstrate that SRFabric can deliver lower average path length, i.e., 2.21 hops on average, and higher bisection bandwidth, i.e., up to 77% nonblocking bandwidth, and provide comparable performance with state-of-the-art strategy XFabric at a lower cost, i.e., XFabric costs up to 3 times more than that of SRFabric.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

scholarly journals The Implications of Regulatory Framework for Topical Semisolid Drug Products: From Critical Quality and Performance Attributes towards Establishing Bioequivalence

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 710
Author(s):  
Tanja Ilić ◽  
Ivana Pantelić ◽  
Snežana Savić
Keyword(s):  
Statistical Power ◽  
Failure Modes ◽  
In Vitro Release ◽  
Optimal Number ◽  
Drug Products ◽  
Pharmaceutical Equivalence ◽  
And Performance ◽  
Low Sensitivity

Due to complex interdependent relationships affecting their microstructure, topical semisolid drug formulations face unique obstacles to the development of generics compared to other drug products. Traditionally, establishing bioequivalence is based on comparative clinical trials, which are expensive and often associated with high degrees of variability and low sensitivity in detecting formulation differences. To address this issue, leading regulatory agencies have aimed to advance guidelines relevant to topical generics, ultimately accepting different non-clinical, in vitro/in vivo surrogate methods for topical bioequivalence assessment. Unfortunately, according to both industry and academia stakeholders, these efforts are far from flawless, and often upsurge the potential for result variability and a number of other failure modes. This paper offers a comprehensive review of the literature focused on amending regulatory positions concerning the demonstration of (i) extended pharmaceutical equivalence and (ii) equivalence with respect to the efficacy of topical semisolids. The proposed corrective measures are disclosed and critically discussed, as they span from mere demands to widen the acceptance range (e.g., from ±10% to ±20%/±25% for rheology and in vitro release parameters highly prone to batch-to-batch variability) or reassess the optimal number of samples required to reach the desired statistical power, but also rely on specific data modeling or novel statistical approaches.

Towards a framework for measuring creative economy: evidence from Balkan countries

2019 ◽  
Vol 23 (1) ◽  
pp. 41-62 ◽  
Author(s):  
Valentina Ndou ◽  
Giovanni Schiuma ◽  
Giuseppina Passiante
Keyword(s):  
Business Environment ◽  
Creative Economy ◽  
Data Set ◽  
Content Type ◽  
Balkan Countries ◽  
World Economic ◽  
And Performance ◽  
Diverse Data ◽  
The Relationship ◽  
Performance Dimension

PurposeThe creative process through which the territorial resources, knowledge and culture are used, exploited and configured to match needs and to achieve congruence with the changing business environment has become a crucial process for competitiveness. This is even more relevant for economies of developing countries which are continuously struggling to reap the benefits of globalisation, as well as to grasp the new opportunities for competitiveness. As such, this paper aims to try to concentrate on the dynamic perspectives of the creative economy of countries by distinguishing between the potentialities and performance. The paper tackles the influence that creativity capacities might have on performance of countries.Design/methodology/approachThe methodology consists in identifying creative economy indicators from a diverse data set of the World Economic Forum and distinguish them between potential and performance indicators.FindingsData reveal as good progress and emphasis is being devoted to increasing the level of creativity; however, the Balkan countries still holdup in their capacity to boost innovation.Practical implicationsThe paper provide a new focus of research on creativity measurement that is significant for understanding what creative capacities territories possess and the ability to make proficient use for growth and innovation.Originality/valueThis paper proposes a new operational framework for measuring and interpreting the creative economy indicators by identifying not only indicators that gauge the potentialities of a country, but also indicators that are linked with the performance dimension, as well as the relationship amongst them.

Characterisation of Static Strip Seal Flow

2007 ◽  
Author(s):  
Arash Farahani ◽  
Peter Childs
Keyword(s):  
Gas Flow ◽  
Pressure Ratio ◽  
Flow Characteristics ◽  
Main Stream ◽  
Cfd Modelling ◽  
Height Range ◽  
And Performance ◽  
Nozzle Guide ◽  
The Cost ◽  
Cooling Air

Strip seals are used in gas turbine engines between two static elements or between components which do not move relative to each other, such as Nozzle Guide Vanes (NGVs). The key role of a strip seal between NGV segments is sealing between the flow through the main stream annulus and the internal air system, a further purpose is to limit the inter-segmental movements. In general the shape of the strip seal is a rectangular strip that fits into two slots in adjacent components. The minimum clearance required for static strip seals must be found by accounting for thermal expansion, misalignment, and application, to allow correct fitment of the strip seals. Any increase in leakage raises the cost due to an increase in the cooling air use, which is linked to specific fuel consumption, and it can also alter gas flow paths and performance. The narrow path within the seal assembly, especially the height has the most significant affect on leakage. The height range of the narrow path studied in this paper is 0.01–0.06 mm. The behaviour of the flow passing through the narrow path has been studied using CFD modelling and measurements in a bespoke rig. The CFD and experimental results show that normalized leakage flow increases with pressure ratio before reaching a maximum. The main aim of this paper is to provide new experimental data to verify the CFD modelling for static strip seals. The typical flow characteristics validated by CFD modelling and experiments can be used to predict the flow behaviour for future static strip seal designs.

scholarly journals A Bit String Content Aware Chunking Strategy for Reduced CPU Energy on Cloud Storage

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Bin Zhou ◽  
ShuDao Zhang ◽  
Ying Zhang ◽  
JiaHao Tan
Keyword(s):  
Energy Consumption ◽  
Data Center ◽  
System Performance ◽  
Cloud Storage ◽  
High Performance ◽  
Factors Affecting ◽  
Redundant Data ◽  
Energy Factors ◽  
The Cost ◽  
Content Aware

In order to achieve energy saving and reduce the total cost of ownership, green storage has become the first priority for data center. Detecting and deleting the redundant data are the key factors to the reduction of the energy consumption of CPU, while high performance stable chunking strategy provides the groundwork for detecting redundant data. The existing chunking algorithm greatly reduces the system performance when confronted with big data and it wastes a lot of energy. Factors affecting the chunking performance are analyzed and discussed in the paper and a new fingerprint signature calculation is implemented. Furthermore, a Bit String Content Aware Chunking Strategy (BCCS) is put forward. This strategy reduces the cost of signature computation in chunking process to improve the system performance and cuts down the energy consumption of the cloud storage data center. On the basis of relevant test scenarios and test data of this paper, the advantages of the chunking strategy are verified.

scholarly journals Alert: An Adaptive Low-Latency Event-Driven MAC Protocol for Wireless Sensor Networks

2011 ◽  
Vol 2011 ◽  
pp. 1-19
Author(s):  
Vinod Namboodiri ◽  
Abtin Keshavarzian
Keyword(s):  
Mac Protocol ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Network Applications ◽  
Alarm Systems ◽  
Minimum Latency ◽  
Multiple Sensor ◽  
Protocol Execution ◽  
And Performance ◽  
The Cost

Collection of rare but delay-critical messages from a group of sensor nodes is a key process in many wireless sensor network applications. This is particularly important for security-related applications like intrusion detection and fire alarm systems. An event sensed by multiple sensor nodes in the network can trigger many messages to be sent simultaneously. We present Alert, a MAC protocol for collecting event-triggered urgent messages from a group of sensor nodes with minimum latency and without requiring any cooperation or prescheduling among the senders or between senders and receiver during protocol execution. Alert is designed to handle multiple simultaneous messages from different nodes efficiently and reliably, minimizing the overall delay to collect all messages along with the delay to get the first message. Moreover, the ability of the network to handle a large number of simultaneous messages does not come at the cost of excessive delays when only a few messages need to be handled. We analyze Alert and evaluate its feasibility and performance with an implementation on commodity hardware. We further compare Alert with existing approaches through simulations and show the performance improvement possible through Alert.

scholarly journals ИСПОЛЬЗОВАНИЕ ТЕОРИИ НЕЧЕТКИХ МНОЖЕСТВ В ЭКОНОМИЧЕСКОМ АНАЛИЗЕ ИНВЕСТИЦИОННЫХ ПРОЕКТОВ

2018 ◽  
Vol 2 (5(17)) ◽  
pp. 44-48
Author(s):  
Файзиев Р. А. ◽  
Хаитматов У. Т. ◽  
Азаматов О. Х. ◽  
Джуманиязов Ш. Р. ◽  
Хасанова Х. Х.
Keyword(s):  
Integral Characteristic ◽  
Mathematical Methods ◽  
Investment Projects ◽  
Performance Targets ◽  
Methods Of Evaluation ◽  
Interval Approach ◽  
And Performance ◽  
The Cost ◽  
Fuzzy Interval ◽  
Theory Of Fuzzy Sets

The article outlines the main features of the use of the theory of indefinite bundles in the evaluation of the cost-effectiveness of investment projects.He analysis of methods for quantifying the effectiveness of the IP under uncertainty suggests that the existing methods either eliminate the uncertainty from the IP model, which is inappropriate, since uncertainty is an integral characteristic of any forecast, or are unable to formally describe, and take into account all possible varieties of types of uncertainty.Methods based on the theory of fuzzy sets refer to the methods of evaluation and decision-making under conditions of uncertainty. Their use implies the formalization of the initial parameters and performance targets of the IP in the form of a vector of interval values (fuzzy interval), the hit in each interval of which is characterized by a certain degree of uncertainty.Also, the fuzzy-interval approach has advantages in solving the problems of forming an optimal portfolio of investment projects. To solve the problem of forming an optimal IP portfolio, a large number of models for the formation of an optimal IP portfolio have been developed, differing from each other in the form of objective functions, variable properties, used by mathematical methods, and uncertainty.

scholarly journals ESTIMATION OF THE EFFICIENCY OF THE LUBRICATION OF THE WORKING SURFACES OF THE SADDLE-COUPLING DEVICE OF THE FOREST TRUCK

2021 ◽  
Author(s):  
Valeriy Posmetev ◽  
Vadim Nikonov ◽  
Viktor Posmetev
Keyword(s):  
Computer Experiments ◽  
Base Plate ◽  
Optimal Number ◽  
Actual Problem ◽  
Premature Failure ◽  
Coupling Device ◽  
Excessive Consumption ◽  
Operational Factors ◽  
Friction Surfaces ◽  
The Cost

The importance of the need for further constructive improvement of fifth-wheel couplings of timber tractors with semi-trailers has been substantiated. The main operational factors arising during the movement of a timber tractor with a semitrailer in the process of hauling timber and affecting the premature failure of the main parts of the fifth wheel coupling are considered. The influence on the resource of the fifth wheel coupling device of strict fulfillment of the mandatory operations of periodic lubrication of the saddle and the base plate of the semitrailer in the process of connecting and disconnecting it with a timber tractor is given. Described is the actual problem associated with excessive consumption of lubricant in the process of applying it to the friction surfaces of the saddle and the base plate of the semitrailer by the traditional method of extrusion. A possible method of dosed supply of the required volume of lubricant through the optimal number of lubrication holes to the friction surfaces is considered, which makes it possible to significantly reduce the cost of maintaining the operable state of the fifth wheel coupling. In order to preliminary evaluate the application of this lubrication method, which ensures the effective functioning of the fifth wheel coupling of a timber tractor with a semitrailer, several series of computer experiments were performed to determine the optimal number of lubrication holes in the saddle that evenly and dosed distribute the lubricant between the saddle and the base plate of the semitrailer.

Sign in / Sign up

Export Citation Format

Share Document