scholarly journals Threshold voltage model for hetero-gate-dielectric tunneling field effect transistors

Author(s):  
Ajay Kumar Singh ◽  
Tan Chun Fui ◽  
Tan Wee Xin Wilson

In this paper, a two dimensional analytical model of the threshold voltage for HGD TFET structure has been proposed. We have also presented the analytical models for the tunneling width and the channel potential. The potential model is used to develop the physics based model of threshold voltage by exploring the transition between linear to exponential dependence of drain current on the gate bias. The proposed model depends on the drain voltage, gate dielectric near the source and drain, silicon film thickness, work function of gate metal and oxide thickness. The accuracy of the proposed model is verified by simulation results of 2-D ATLAS simulator. Due to the reduction of the equivalent oxide thickness, the coupling between the gate and the channel junction enhances which results in lower threshold voltage. Tunneling width becomes narrower at a given gate voltage for the optimum channel concentration of 1016 /cm3. The higher concentration in the source (Ns) causes a steep bending in the conduction and valence bands compared to the lower concentration which results in smaller tunneling width at the source-channel interface.

2001 ◽  
Vol 686 ◽  
Author(s):  
Michele L. Ostraat ◽  
Jan W. De Blauwe

AbstractA great deal of research interest is being invested in the fabrication and characterization of nanocrystal structures as charge storage memory devices. In these flash memory devices, it is possible to measure threshold voltage shifts due to charge storage of only a few electrons per nanocrystal at room temperature. Although a variety of methods exist to fabricate nanocrystals and to incorporate them into device layers, control over the critical nanocrystal dimensions, tunnel oxide thickness, and interparticle separation and isolation remains difficult to achieve. This control is vital to produce reliable and consistent devices over large wafer areas. To address these control issues, we have developed a novel two-stage ultra clean reactor in which the Si nanocrystals are generated as single crystal, nonagglomerated, spherical aerosol particles from silane decomposition at 950°C at concentrations exceeding 108 cm−3 at sizes below 10 nm. Using existing aerosol instrumentation, it is possible to control the particle size to approximately 10% on diameter. In the second reactor, particles are passivated with a high quality oxide layer with shell thickness controllable from 0.7 to 2.0 nm. The two-stage aerosol reactor is integrated to a 200 mm wafer deposition chamber such that controlled particle densities can be deposited thermophoretically. With nanocrystal deposits of 1013 cm−2, contamination of transition metals and other elements can be controlled to less than 1010 atoms cm−2.We have fabricated 0.2 μm channel length aerosol nanocrystal floating gate memory devices using conventional MOS ULSI processing on 200 mm wafers. The aerosol nanocrystal memory devices exhibit normal transistor characteristics with drive current 30 μA/μm, subthreshold slope 200 mV/dec, and drain induced barrier lowering 100 mV/V, typical values for thick gate dielectric high substrate doped nonvolatile memory devices. Uniform Fowler-Nordheim tunneling is used to program and erase these memory devices. Despite 5 nm tunnel oxides, threshold voltage shifts > 2 V have been achieved with microsecond program and millisecond erase times at moderate operating voltages. The aerosol devices also exhibit excellent endurance cyclability with no window closure observed after 105 cycles. Furthermore, reasonable disturb times and long nonvolatility are obtained, illustrating the inherent advantage of discrete nanocrystal charge storage. No drain disturb was detected even at drain biases of 4V, indicating that little or no charge conduction occurs in the nanocrystal layer. We have demonstrated promise for aerosol nanocrystal memory devices. However, numerous issues exist for the future of nanocrystal devices. These technology issues and challenges will be discussed as directions for future work.


2010 ◽  
Vol 645-648 ◽  
pp. 1215-1218
Author(s):  
Marko J. Tadjer ◽  
Karl D. Hobart ◽  
Michael A. Mastro ◽  
Travis J. Anderson ◽  
Eugene A. Imhoff ◽  
...  

Field-effect transistors were fabricated on GaN and Al0.2Ga0.8N epitaxial layers grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrates. The threshold voltage VTH was higher when AlGaN was used as an active layer. VTH also increased with temperature due to the increased positive polarization charge at the GaN/AlN buffer/sapphire interfaces. Drain current increased at high temperatures even with more positive threshold voltage, which makes GaN-based FET devices attractive for high temperature operation.


2011 ◽  
Vol 10 (04n05) ◽  
pp. 745-748
Author(s):  
N. PADMA ◽  
SHASWATI SEN ◽  
A. K. CHAUHAN ◽  
D. K. ASWAL ◽  
S. K. GUPTA ◽  
...  

Effect of the gate dielectric on the performance of Copper phthalocyanine (CuPc) based top contact organic field effect transistors (OFET) has been studied using thermally grown SiO2 and sputtered HfO x films with dielectric constants of 3.9 and 12.5 respectively. Operating voltages of the devices on SiO2 and HfO x were found to be 10–50 V and 2–3 V, respectively. The lower operating voltage for HfO x is attributed to the higher dielectric constant. Devices on SiO2 and HfO x were found to have field effect mobilities of 0.01 and 3.5 × 10-3 cm2/Vs and drain current modulation of 103 and 102, respectively. Scanning Electron Microscopy showed widely scattered nanowires on HfO x and densely packed nanofibers on SiO2 . X-ray diffraction studies showed better crystallinity of films on SiO2 . The results show that operating voltage of devices can be reduced by using higher dielectric constant material while mobility and FET characteristics depend on structure of CuPc that in turn is influenced by the dielectric.


2012 ◽  
Vol 482-484 ◽  
pp. 1093-1096 ◽  
Author(s):  
Xiao Feng Zhuang ◽  
Qing Kai Zeng ◽  
Bing Ren ◽  
Zhen Hua Wang ◽  
Yue Lu Zhang ◽  
...  

In this paper, the threshold voltage of diamond film-based metal-semiconductor field effect transistors (MESFETs) has been simulated using Silvaco TCAD tools. The drain current (Id) versus gate voltage (Vg) relationship, and the distribution of acceptors in diamond surface conduction layer were also investigated. From the simulation results, it was found that the gate length contributed the most to the threshold voltage, while the doping depth almost had no impact on the threshold voltage value.


2021 ◽  
Author(s):  
Vidyadhar Gupta ◽  
Himanshi Awasthi ◽  
Nitish Kumar ◽  
Amit Kumar Pandey ◽  
ABHINAV GUPTA

Abstract This present article interprets the analytical models of central channel potential, the threshold voltage, and subthreshold current for Graded-Doped Junctionless-Gate-All-Around (GD-JL-GAA) MOSFETs. The parabolic approximation equation with appropriate boundary conditions has been adopted to solve the 2D Poisson’s equation for determining the central channel potential. The minimum channel potential is obtained by potential channel expression, and it is utilized to determine the threshold voltage and subthreshold current by using the Drift-Diffusion method. The behaviour of GD-JL-GAA MOSFETs has been examined by varying physical device parameters such as doping concentration (NDn), channel thickness (tsi), oxide thickness (tox), and channel length ratio (L1 : L2). The mathematical analysis shows that the nominal gate leakage current in GD-JL-GAA MOSFETs due to high graded abrupt junction inside the channel region. The analytical model results have been verified with simulation data extracted from a TCAD simulator.


2004 ◽  
Vol 19 (7) ◽  
pp. 1999-2002 ◽  
Author(s):  
Ch. Pannemann ◽  
T. Diekmann ◽  
U. Hilleringmann

This article reports degradation experiments on organic thin film transistors using the small organic molecule pentacene as the semiconducting material. Starting with degradation inert p-type silicon wafers as the substrate and SiO2 as the gate dielectric, we show the influence of temperature and exposure to ambient air on the charge carrier field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found to have unambiguously degraded over 3 orders of magnitude in maximum on-current and charge carrier field-effect mobility, but they still operated after a period of 9 months in ambient air conditions. A thermal treatment was carried out in vacuum conditions and revealed a degradation of the charge carrier field-effect mobility, maximum on-current, and threshold voltage.


Author(s):  
Youssef Ahmed Mobarak ◽  
Moamen Atef

<span>The potential impact of high permittivity gate dielectrics on thin film transistors short channel and circuit performance has been studied using <a name="OLE_LINK110"></a><a name="OLE_LINK118"></a>highly accurate analytical models. In addition, the gate-to-channel capacitance and parasitic fringe capacitances have been extracted. The suggested model in this paper has been <a name="OLE_LINK37"></a><a name="OLE_LINK36"></a>increased the surface potential and decreased the <a name="OLE_LINK93"></a><a name="OLE_LINK92"></a>threshold voltage, whenever the conventional silicon dioxide gate dielectric<a name="OLE_LINK290"></a><a name="OLE_LINK280"></a> is replaced by high-K gate dielectric novel nanocomposite PVP/La<sub>2</sub>O<sub>3</sub>K<sub>ox</sub>=25. Also, it has been investigated that a decrease in parasitic outer fringe capacitance and gate-to-channel capacitance, whenever the conventional silicon nitride is replaced by low-K gate sidewall spacer dielectric novel nanocomposite PTFE/SiO<sub>2</sub>K<sub>sp</sub>=2.9. Finally, it has been demonstrated that using low-K gate sidewalls with high-K gate insulators can be decreased the gate fringing field and threshold voltage. In addition, fabrication of nanocomposites from polymers and nano-oxide particles found to have potential candidates for using it in a wide range of applications in low cost due to low process temperature of these nanocomposites materials.</span>


2013 ◽  
Vol 8 (2) ◽  
pp. 71-77
Author(s):  
Eddy Simoen ◽  
Maria G. C. Andrade ◽  
Luciano M. Almeida ◽  
M. Aoulaiche ◽  
C. Caillat ◽  
...  

The variability of the low-frequency (LF) noise in n-channel MOSFETs fabricated on an Ultra-Thin Buried Oxide (UTBOX) Silicon-on-Insulator (SOI) substrate has been studied and compared with the variability in the threshold voltage and low-field mobility of the same devices. No correlation has been found between the noise magnitude and the DC parameters, suggesting that the traps responsible for the current fluctuations do not affect the latter. A possible explanation is that the LF noise is dominated by Generation-Recombination (GR) centers in the silicon film, which have less impact on the drain current.


Sign in / Sign up

Export Citation Format

Share Document