Evaluation of Chitosan Nanomaterials in the Treatment of Helicobacter pylori Mediated Gastric Diseases

2020 ◽  
Vol 20 (12) ◽  
pp. 7464-7468
Author(s):  
Xiaobo Wang ◽  
Feng Ji

We assessed the effect of chitosan on Helicobacter pylori (HPY) in vitro to provide an experimental basis for the clinical application of chitosan in the treatment of gastric diseases. Here, the method of hole drilling was used to detect the bacteriostatic effect of different concentrations and pH values of chitosan on the standard bacterial strain Sydney strain I (SSI) and two strains of HPY isolated from patients. The bacteriostatic test was used to explore the effect of different molecular weights of chitosan and metal ions on the antibacterial effect of chitosan. The effect of chitosan showed no significant difference among three HPY strains (p < 0.05); moreover, in the range of pH 5.5–8.5, the antibacterial effect of chitosan increased with decrease in pH value (p < 0.01). A significant difference in the antibacterial effect of chitosan was observed at different concentrations (p < 0.01), reaching a peak at 40 g/mL. The molecular weight of chitosan was within 400 kb. With increasing molecular weight, the antibacterial activity of chitosan increased initially and then decreased. The molecular weight of 0.200 kb demonstrated the strongest anti-HPY effect, with the antibacterial effect observed for up to 134 h. Metal ions such as NaCl and MgCl2 affected the anti-HPY effect of chitosan; with increasing concentration, the antibacterial percentage decreased.

1964 ◽  
Vol 12 (01) ◽  
pp. 232-261 ◽  
Author(s):  
S Sasaki ◽  
T Takemoto ◽  
S Oka

SummaryTo demonstrate whether the intravascular precipitation of fibrinogen is responsible for the toxicity of heparinoid, the relation between the toxicity of heparinoid in vivo and the precipitation of fibrinogen in vitro was investigated, using dextran sulfate of various molecular weights and various heparinoids.1. There are close relationships between the molecular weight of dextran sulfate, its toxicity, and the quantity of fibrinogen precipitated.2. The close relationship between the toxicity and the precipitation of fibrinogen found for dextran sulfate holds good for other heparinoids regardless of their molecular structures.3. Histological findings suggest strongly that the pathological changes produced with dextran sulfate are caused primarily by the intravascular precipitates with occlusion of the capillaries.From these facts, it is concluded that the precipitates of fibrinogen with heparinoid may be the cause or at least the major cause of the toxicity of heparinoid.4. The most suitable molecular weight of dextran sulfate for clinical use was found to be 5,300 ~ 6,700, from the maximum value of the product (LD50 · Anticoagulant activity). This product (LD50 · Anticoagulant activity) can be employed generally to assess the comparative merits of various heparinoids.5. Clinical use of the dextran sulfate prepared on this basis gave satisfactory results. No severe reaction was observed. However, two delayed reactions, alopecia and thrombocytopenia, were observed. These two reactions seem to come from the cause other than intravascular precipitation.


2018 ◽  
Vol 775 ◽  
pp. 26-31
Author(s):  
Sukantika Manatsittipan ◽  
Kamonthip Kuttiyawong ◽  
Kazuo Ito ◽  
Sunan Tiptipakorn

In this study, the biodegradability and thermal properties the composites of polybutylene succinate (PBS) and chitosan of different molecular weights (Mn = 104,105, and 106 Da) were prepared at chitosan contents of 0-10 wt%. After 10 days of microbial degradation, the results show that the amount of holes from degradation was increased with either decreasing Mn or increasing chitosan contents. However, the size of holes was increased with increasing Mn and chitosan contents. The results from Differential Scanning Calorimeter (DSC) present that the melting temperature (Tm) of PBS was decreased with increasing chitosan contents. Moreover, there was no significant difference between Tm of the composites with different Mn of chitosan. From the TGA thermograms, the decomposition temperature at 10% weight loss (Td10) was decreased with increasing chitosan contents. Moreover, the water absorption of PBS/chitosan composites was increased with increasing Mn and content of chitosan.


Marine Drugs ◽  
2018 ◽  
Vol 16 (11) ◽  
pp. 445 ◽  
Author(s):  
Xue Liu ◽  
Peng Du ◽  
Xiao Liu ◽  
Sujian Cao ◽  
Ling Qin ◽  
...  

The active sulfated polysaccharide from seaweed possesses important pharmaceutical and biomedical potential. In the study, Monostroma sulfated polysaccharide (MSP) was obtained from Monostroma angicava, and the low-molecular-weight fragments of MSP (MSP-Fs: MSP-F1–MSP-F6) were prepared by controlled acid degradation. The molecular weights of MSP and MSP-F1–MSP-F6 were 335 kDa, 240 kDa, 90 kDa, 40 kDa, 24 kDa, 12 kDa, and 6.8 kDa, respectively. The polysaccharides were sulfated rhamnans that consisted of →3)-α-l-Rhap-(1→ and →2)-α-l-Rhap-(1→ units with partial sulfation at C-2 of →3)-α-l-Rhap-(1→ and C-3 of →2)-α-l-Rhap-(1→. Anticoagulant properties in vitro of MSP and MSP-F1–MSP-F6 were evaluated by studying the activated partial thromboplastin time, thrombin time, and prothrombin time. Anticoagulant activities in vivo of MSP and MSP-F4 were further evaluated; their fibrin(ogen)olytic activities in vivo and thrombolytic properties in vitro were also assessed by D-dimer, fibrin degradation products, plasminogen activator inhibitior-1, and clot lytic rate assays. The results showed that MSP and MSP-F1–MSP-F4 with molecular weights of 24–240 kDa had strong anticoagulant activities. A decrease in the molecular weight of MSP-Fs was accompanied by a decrease in the anticoagulant activity, and higher anticoagulant activity requires a molecular weight of over 12 kDa. MSP and MSP-F4 possessed strong anticoagulant activities in vivo, as well as high fibrin(ogen)olytic and thrombolytic activities. MSP and MSP-F4 have potential as drug or helpful food supplements for human health.


Blood ◽  
2014 ◽  
Vol 124 (21) ◽  
pp. 4217-4217
Author(s):  
Gabriela Chang ◽  
Helen M. Atkinson ◽  
Leslie R. Berry ◽  
Anthony K.C. Chan

Abstract Introduction: Unfractionated heparin (UFH) and low molecular weight heparin (LMWH) are widely used anticoagulants for thrombosis treatment. However, these anticoagulants have limitations such as increased bleeding, variable dose response, required frequent monitoring, and, in the case of LMWH, inability to inhibit thrombin. This has led to the development of a covalent complex of antithrombin and heparin (ATH), which has been shown to overcome many of these shortcomings. ATH has faster rates of inhibition of many coagulation factors, is able to inhibit clot-bound thrombin, and is a more effective inhibitor of both venous and arterial thrombosis in animal models. Moreover, in a rabbit thrombosis model, ATH has been shown to decrease clot mass and fibrin accretion, while the contrary was observed for UFH. From these observations, it was suggested that ATH may enhance fibrin breakdown and thus led to investigations into the effects of UFH and ATH on fibrinolysis. In vitro studies have shown that UFH enhances antithrombin inhibition of plasmin. In addition, ATH displays a slightly greater inhibition of plasmin generation and activity. Such studies were conducted in purified systems, in the absence of other plasmin inhibitors naturally present in plasma. Therefore, the aim of the present study was to compare the effects of UFH, LMWH, and ATH on plasmin generation in plasma. Methods: At 37°C tissue plasminogen activator (tPA) and soluble fibrin fragments (fib) were added to normal adult pooled platelet poor plasma supplemented with 0.35, 0.7, 1.4, or 2.1 U anti-Xa/ml UFH, LMWH, or ATH, to initiate plasmin generation (8.93nM tPA and 300µg/ml fib). At various time points, subsamples were mixed with excess plasminogen activator inhibitor 1 (PAI-1) (55.12nM) to stop further plasmin generation. The plasmin concentration at each time point was determined using a plasmin-specific chromogenic substrate and a standard curve produced from purified plasmin. Results: Comparisons of mean area under the curve (AUC) for plasmin generation displayed a significant decrease in plasmin generation in the presence of all three anticoagulants at all doses tested (p<0.05). Comparing the anticoagulants at similar doses, plasmin generation was significantly decreased in the presence of ATH (15384.66±1930.23nM/min) compared to LMWH (23892.28±3090.54nM/min) at 0.7 U/ml (p<0.05). At a dose of 1.4 U/ml, there was significantly less plasmin generated, over time, in the presence of UFH (20089.49±3022.1623nM/min) and ATH (19273.86±1805.7323nM/min) when compared to LMWH (24743.18±1265.1023nM/min) (p<0.05). There was no significant difference in plasmin inhibition between UFH and ATH at any of the doses tested. Conclusion: The present study supports previous findings that UFH and ATH can facilitate antithrombin inhibition of plasmin. It is also observed that LMWH catalyzes the inhibition of plasmin by antithrombin but possibly to a lesser extent. These findings suggest that ATH has a similar inhibitory effect on plasmin generation and activity in plasma compared to UFH, despite its overall superior anticoagulant properties. Therefore, previous in vivo observations displaying decrease in clot mass with administration of ATH was due to its enhanced anticoagulant abilities and not fibrinolysis enhancement. These findings add to our understanding of ATH mechanisms of action and aid in its development for clinical use. Disclosures No relevant conflicts of interest to declare.


1983 ◽  
Vol 59 (1) ◽  
pp. 81-103 ◽  
Author(s):  
R. Crossley ◽  
D.V. Holberton

Proteins from the axonemes and disc cytoskeleton of Giardia lamblia have been examined by sodium dodecyl sulphate/polyacrylamide gel electrophoresis. In addition to tubulin and the 30 X 10(3) molecular weight disc protein, at least 18 minor components copurify with the two major proteins in Triton-insoluble structures. The most prominent minor bands have the apparent molecular weights of 110 X 10(3), 95 X 10(3) and 81 X 10(3). Protein of 30 X 10(3) molecular weight accounts for about 20% of organelle protein on gels. In continuous 25 mM-Tris-glycine buffer it migrates mostly as a close-spaced doublet of polypeptides, which are here given the name giardins. Giardia tubulin and giardin have been purified by gel filtration chromatography in the presence of sodium dodecyl sulphate. Well-separated fractions were obtained that could be further characterized. Both proteins are heterogeneous when examined by isoelectric focusing. Five tubulin chains were detected by PAGE Blue 83 dye-binding after focusing in a broad-range ampholyte gel. Giardin is slightly less acidic than tubulin. On gels it splits into four major and four minor chains with isoelectric points in the pI range from 5.8 to 6.2. The amino acid composition of the giardin fraction has been determined, and compared to Giardia tubulin and a rat brain tubulin standard. Giardins are rich in helix-forming residues, particularly leucine. They have a low content of proline and glycine; therefore they may have extensive alpha-helical regions and be rod-shaped. As integral proteins of disc microribbons, giardins in vivo associate closely with tubulin. The properties of giardins indicate that in a number of respects - molecular size, charge, stoichiometry - their structural interaction with tubulin assemblies will be different from other tubulin-accessory protein copolymers studied in vitro.


2016 ◽  
Vol 66 (2) ◽  
pp. 234-244
Author(s):  
Ljubiša Đorđević ◽  
Stevo Najman ◽  
Perica Vasiljević ◽  
Miroslav Miljković ◽  
Nenad Ignjatović ◽  
...  

Abstract Implantation of a biomaterial is one of the important trends in solving the problem of bone tissue loss. Calcium hydroxiapatite (HAp), as the most representative bone component is a serious candidate for such implantations. The synthetic polymer poly-L-lactide (PLLA) in HAp/PLLA is often used as a polymeric material, with a role in the substitution of bone tissue collagen fibers. Fibers of PLLA may strengthen HAp and its good bioresorption provides space for tissue remodeling. Differences in porosity, microstructure, compressive consistency as well as bioresorbility of HAp/ PLLA may be achieved by using PLLA with different molecular weights. In this study HAp/PLLA composites with PLLA of different molecular weights (50,000; 160,000 and 430,000) were implanted in mouse peritoneum in order to examine the influence of the molecular weight of PLLA on morphology changes. Microstructural changes of biomaterial (HAp/PLLA) surface were analyzed one week, three weeks and four months after their implantation using Scanning Electron Microscopy. The results showed a significant difference in tissue reactions on the applied biocomposites, depending on their molecular weight. The most intense proliferation of cells was induced by HAp/PLLA 50,000 compared to HAp/PLLA 430,000 and HAp/PLLA 160,000. In the vicinity of HAp/PLLA 430,000 abundant erythrocytes were observed. The differences in biological reactions on the examined biocomposites are significant for their practical applications. HAp/PLLA composite biomaterials of different types and resorption rates require specific designing and programming to become suitable for particular purposes in an organism.


Parasitology ◽  
1978 ◽  
Vol 76 (1) ◽  
pp. 29-37 ◽  
Author(s):  
D. W. Halton

SummaryAn in vitro investigation has been made of the relative roles of the gut and tegument in the absorption of the neutral amino acids L-alanine and L-leucine by a marine fish-gill parasite, Diclidophora merlangi. The use of ligatures to preclude oral ingestion of trace-labelled medium has proved inadequate, invariably damaging the tegument, as revealed by stereoscan electron microscopy, and resulting in artifactual levels of absorption. Three alternative procedures have given consistently reliable data on the route of entry of low molecular weight substrates. (1) Ultrastructural examination of worms previously incubated in electron-dense cationic tracers has shown that, in vitro, there is no oral intake of sea water. (2) The suspending of worms in trace-labelled medium with the mouth out of the medium and comparing amino acid uptake with that of worms totally immersed in medium has revealed no statistically significant difference in the absorption levels. (3) Application of section (freeze-dried) auto-radiography to detect diffusible isotope has demonstrated directly transtegumental absorption of a neutral amino acid. It is concluded from these experiments that Diclidophora has a tegumental transport system for absorbing certain neutral amino acids, and whilst, clearly, the worm is sanguinivorous and digests blood in a well-developed gut, it may also be capable of supplementing this diet with low molecular weight organic nutrient absorbed directly from sea water via the tegument.


1981 ◽  
Vol 196 (1) ◽  
pp. 49-55 ◽  
Author(s):  
R Duncan ◽  
M K Pratten ◽  
H C Cable ◽  
H Ringsdorf ◽  
J B Lloyd

Rates of pinocytosis of different molecular-weight distributions of 125I-labelled poly(vinylpyrrolidone) by rat visceral yolk sacs and rat peritoneal macrophages were measured in vitro. Four preparations of mean molecular weights 50 000, 84 000, 700 000 and 7 000 000, were used. Macrophages captured the highest-molecular-weight preparation more rapidly than the other preparations. In contrast, rate of capture by the yolk sac decreased with increasing molecular weight. Incubations with a very-high-molecular-weight fraction derived from the 7 000 000-average-mol. wt. preparation clearly demonstrated that very large polymer molecules are not accumulated by the yolk sac, but are preferentially captured by macrophages. Analysis of the 125I-labelled poly(vinylpyrrolidone) internalized by the two cell types confirmed that low-molecular-weight material is preferred by the yolk sac, whereas the macrophage is less discriminating.


1987 ◽  
Vol 65 (8) ◽  
pp. 762-765 ◽  
Author(s):  
Resham S. Bhella ◽  
Illimar Altosaar

The biosynthesis of glucoamylases in Aspergillus awamori was studied by in vivo protein labelling and analysis of glucoamylase-specific mRNAs. Two types of glucoamylases with molecular weights of 100 000 and 82 000 were shown to be synthesized de novo. Deglycosylation of the 100 000 molecular weight glucoamylase type resulted in the formation of another glucoamylase form with molecular weight of about 94 000. De novo synthesis of two types of glucoamylases was further confirmed by the existence of two types of glucoamylase-specific mRNAs, as demonstrated by in vitro translation and Northern blot analysis studies.


Author(s):  
Maoen Pan ◽  
Chaoqian Zhao ◽  
Zeya Xu ◽  
Yuanyuan Yang ◽  
Tianhong Teng ◽  
...  

Long-term placement of non-degradable silicone rubber pancreatic duct stents in the body is likely to cause inflammation and injury. Therefore, it is necessary to develop degradable and biocompatible stents to replace silicone rubber tubes as pancreatic duct stents. The purpose of our research was to verify the feasibility and biological safety of extrusion-based 3D printed radiopaque chitosan (CS) ducts for pancreaticojejunostomy. Chitosan-barium sulfate (CS-Ba) ducts with different molecular weights (low-, medium-, and high-molecular weight CS-Ba: LCS-Ba, MCS-Ba, and HCS-Ba, respectively) were soaked in vitro in simulated pancreatic juice (SPJ) (pH 8.0) with or without pancreatin for 16 weeks. Changes in their weight, water absorption rate and mechanical properties were tested regularly. The biocompatibility, degradation and radiopaque performance were verified by in vivo and in vitro experiments. The results showed that CS-Ba ducts prepared by this method had regular compact structures and good molding effects. In addition, the lower the molecular weight of the CS-Ba ducts was, the faster the degradation rate was. Extrusion-based 3D-printed CS-Ba ducts have mechanical properties that match those of soft tissue, good biocompatibility and radioopacity. In vitro studies have also shown that CS-Ba ducts can promote the growth of fibroblasts. These stents have great potential for use in pancreatic duct stent applications in the future.


Sign in / Sign up

Export Citation Format

Share Document